**** BEGIN LOGGING AT Sun Apr 19 02:59:57 2009
Apr 19 13:31:29 <Lazerdye> Hi, is it possible to reboot a device over a jtag debug connection?
Apr 19 13:32:23 <Lazerdye> I have a SheevaPlug with an unresponsive console and I'm not physically there to reset it.
Apr 19 13:44:03 <roxfan> try "reset" in openocd?
Apr 19 13:45:13 <roxfan> you might have to say "go" or "run" afterwards... i forget which
Apr 19 13:53:35 <Lazerdye> roxfan: thanks, I think it worked...
Apr 19 13:56:40 <Lazerdye> roxfan: gives lots of errors, but it certainly reboots the device, cool!
Apr 19 13:56:58 <roxfan> ok
Apr 19 14:40:24 <johnycc> good day, i'm doing development on the ST STR912 (arm9) and now that my codesize have increased, openocd is giving timeouts - would somebody be interested in helping me to track down this issue?
Apr 19 14:49:23 <johnycc> the problem seems to occur as soon as the size of the image is > 32k. When the image is 27k, it gets programmed into the flash at 40kbps taking .7 seconds. At 34k, the programming occurs a timeout.
Apr 20 02:41:06 <Safety0ff> Hello, anyone around?
**** ENDING LOGGING AT Mon Apr 20 02:59:57 2009