**** BEGIN LOGGING AT Sun May 17 02:59:57 2009
May 17 18:17:37 <building21> hello. can somebody help me with my jtagconfiguration?
May 17 18:19:41 <building21> i am trying it since some weeks and get no solution
May 17 18:23:05 <zwelch> which app?
May 17 18:23:46 <building21> i use openocd build with libftdi under linux with an olimex arm usb ocd on a lpc-h2148
May 17 18:23:54 <building21> in revision 1801
May 17 18:24:14 <building21> my config i have here http://pastebin.com/mdba766d
May 17 18:25:22 <building21> and that is the debugoutput on level three http://pastebin.com/m4c1440b1
May 17 18:41:00 <building21> zwelch: that was not the answer of your question or?
May 17 18:41:38 <zwelch> i was just looking through your logs and i don't see anything that jumps out at me
May 17 18:42:06 <zwelch> have you tried posting to the mailing list?  i am not an LPC or ftdi expert, but you might be able to get someone that is
May 17 18:45:45 <building21> so the unknown embeddedice version is okay?
May 17 18:46:03 <zwelch> no idea
May 17 18:46:07 <building21> in the next step i wanne ask on the mailinglist
May 17 18:46:53 <building21> my problem is...i think...that can't halt my armcpu and so i can't flash it
May 17 18:47:03 <building21> + i
May 17 18:47:44 <roxfan> it seems like jtag setup is not correct
May 17 18:47:53 <roxfan> all register values look bogus
May 17 18:48:53 <building21> roxfan: have you an idea what is wrong with it
May 17 18:50:06 <roxfan>  jtag_examine_chain(): JTAG communication failure, check connection, JTAG interface, target power etc. <- doesn't look good
May 17 18:53:44 <building21> i have connected the headerboard via usb on my laptop and the pwrled is on. the olimix usb-ocd is via usb connected too and between them is the jtagcable plugged in
May 17 18:54:01 <building21> the rights for udev are set
May 17 18:54:04 <roxfan> try some other jtag tool if you have any
May 17 18:54:12 <roxfan> or maybe older version of ocd
May 17 18:54:40 <building21> one moment
May 17 18:54:50 <building21> will try version 0.1
May 17 19:04:22 <zwelch> building21: i have heard reports of insufficient power supplies on bus-powered hubs, so be sure that is not the problem (e.g. it looks like it should work but browns itself out during operation).
May 17 19:28:56 <building21> with version 0.1 i have the same problem
May 17 19:30:14 <building21> and with an other external power resource too
May 17 19:33:27 <building21> okay...thanks for your help. i will write an email to the mailinglist tomorrow and test some configurations before
May 17 19:33:49 <building21> have a nice evening
**** ENDING LOGGING AT Mon May 18 02:59:57 2009