**** BEGIN LOGGING AT Tue Jan 19 02:59:57 2010 Jan 19 10:49:20 hy all Jan 19 10:49:40 can somebody tel me if there is a way to flash the thecus n1200? Jan 19 10:49:46 to recover it? Jan 19 10:49:48 pls Jan 19 10:51:12 You'd have to open it up, see if you can find the JTAG pads Jan 19 10:53:17 the problem is that there are no jtag Jan 19 10:53:21 pins Jan 19 10:53:37 i've been looking for some time a way to recover it Jan 19 10:53:45 nobody knows where the jtag port is Jan 19 10:54:11 http://thecus.nas-central.org/wiki/Category:N1200 Jan 19 10:54:26 http://thecus.nas-central.org/wiki/N1200_PCB_Pictures Jan 19 10:55:16 is there another way do recover it without the jtag port? Jan 19 10:59:15 apart from replacing the flash? probably not. Jan 19 11:04:05 badboy1985ro: doesn't it have any kind of bootloader? Sometimes one can flash over tftp or serial if the bootload is working. Jan 19 11:05:33 the bootloader is dead Jan 19 11:05:54 teh serial port is not displayng anithing animore Jan 19 11:09:34 Right, unless you find the JTAG somewhere (there's a fair chance there is one), you're screwed. And even then, I'm not sure how the OpenOCD support for PPC is Jan 19 18:55:21 Hi guys, I am trying to add support on OpenOCD to i.MX51 processor (Cortex-A8), but I am getting "JTAG-DP OVERRUN", could someone help me to get it working? Jan 20 00:03:00 MY WIGGLER JTAGS ARE HERE Jan 20 00:03:00 :D Jan 20 00:20:09 http://www.youtube.com/watch?v=buFGs1bNcyM <---2:20 it's spock trying to use a 74AC373 pinout **** ENDING LOGGING AT Wed Jan 20 02:59:57 2010