**** BEGIN LOGGING AT Thu Mar 25 02:59:57 2010 Mar 25 03:18:53 hi all - I'm trying to build the 0.4.0 openocd release on OS X, and ./configure is complaining about usb.h missing. I have the latest libusb installed (1.0.6), which only seems to provide a libusb.h. Do I need to roll back my libusb version, or is there another usb.h that I'm likely missing? **** BEGIN LOGGING AT Thu Mar 25 17:16:14 2010 Mar 25 22:38:08 hello all... Mar 25 22:39:17 I have some old routers (MI424WR) with IXP425 522mhz...those routers have ARM 20 JTAG ports...I found a schematics on openocd by Mr. Rath for Wiggler...is it possible to build that programmer and use it for that specific router? Mar 25 23:16:34 I have some old routers (MI424WR) with IXP425 522mhz...those routers have ARM 20 JTAG ports...I found a schematics on openocd by Mr. Rath for Wiggler...is it possible to build that programmer and use it for that specific router? Mar 25 23:24:45 it's certainly possible to build a wiggler, many people have done so Mar 25 23:25:15 whether it works with your specific hardware is harder to predict Mar 25 23:26:19 at the very least for xscale you'll need an adapter with srst and trst signals (i think not all variants include them) Mar 25 23:27:01 can you please specify me the link to an image with wiggler for that cpu? It has to be db25 (LPT) on one side and ARM 20 on the other side... Mar 25 23:27:31 if you're saying I would need that adapter for srst and trst...is there a schematics for this also? Mar 25 23:28:09 I founf many AMR20 wiggler schematics, but I really don't know which is the right one... Mar 25 23:28:30 founf=found AMR20=ARM20 **** ENDING LOGGING AT Fri Mar 26 02:59:57 2010