**** BEGIN LOGGING AT Wed Aug 25 02:59:57 2010 Aug 25 06:38:00 agh Aug 25 06:40:03 so I've been having fun building my own wiggler for an old linksys as a fun lil project. But it appears after loads of searching that the Broadcom BCM5352 doesnt support PRACC accesses, except halt according to what little src ive been able to find. Anyone else know this to be not true? Aug 25 06:44:30 also, my openocd file *appears* to work but im still having issues when trying to issue a halt Aug 25 06:45:08 srst_only separate srst_gates_jtag srst_open_drain Aug 25 06:45:09 Error: Translation from jtag_speed to khz not implemented Aug 25 06:45:09 Info : interface specific clock speed value 0 Aug 25 06:45:09 Info : JTAG tap: BCM5352.cpu tap/device found: 0x0535217f (mfg: 0x0bf, part: 0x5352, ver: 0x0) Aug 25 06:45:09 Error: Translation from jtag_speed to khz not implemented Aug 25 06:45:59 -- Aug 25 06:45:59 Escape character is '^]'. Aug 25 06:46:00 Open On-Chip Debugger Aug 25 06:46:00 > halt Aug 25 06:46:00 target was in unknown state when halt was requested Aug 25 06:46:00 Halt timed out, wake up GDB. Aug 25 06:46:00 timed out while waiting for target halted Aug 25 06:46:00 Runtime error, file "command.c", line 473: Aug 25 06:46:03 any ideas? **** ENDING LOGGING AT Thu Aug 26 02:59:57 2010