**** BEGIN LOGGING AT Thu Jan 27 02:59:57 2011
Jan 27 21:40:53 <mreimer1> I have a jtagkey-2P hooked up to a pxa320 board, and I'm getting this error when openocd starts up:
Jan 27 21:40:53 <mreimer1> Error: JTAG scan chain interrogation failed: all ones
Jan 27 21:41:20 <mreimer1> The board is powered, jtag_khz 500
Jan 27 21:42:12 <mreimer1> If I don't use pxa3xx.cfg, I get this on startup:
Jan 27 21:42:12 <mreimer1> Warn : There are no enabled taps.  AUTO PROBING MIGHT NOT WORK!!
Jan 27 21:42:12 <mreimer1> Error: JTAG scan chain interrogation failed: all ones
Jan 27 22:00:24 <mreimer1> Suggestions?
Jan 27 22:02:35 <atiti> can you post the full config?
Jan 27 22:02:38 <atiti> pastebin maybe
Jan 27 22:03:26 <mreimer1> very simple: http://pastebin.com/DhG1FAsD
Jan 27 22:03:42 <roxfan> do you have both srst and trst connected?
Jan 27 22:03:48 <roxfan> and separate
Jan 27 22:04:07 <mreimer1> I'm not sure. I've tried "reset_config trst_and_srst" and "reset_config trst_and_srst separate" but nothing else
Jan 27 22:04:14 <atiti> mreimer1, you definately need the pxa3xx too
Jan 27 22:04:28 <atiti> otherwise openocd does not know which jtag target to initialize
Jan 27 22:04:31 <roxfan> no i mean between board and dongle
Jan 27 22:04:31 <mreimer1> atiti: I've tried with and without. I'll keep it for now
Jan 27 22:04:54 <mreimer1> roxfan: I don't know. I'll see if I can find pinouts
Jan 27 22:05:29 <roxfan> pxa needs separate trst and srst signals to debug the core
Jan 27 22:06:05 <roxfan> hmm although i guess it still should be able to enumerate the chain...
Jan 27 22:06:15 <mreimer1> that's what I was thinking
Jan 27 22:06:19 <roxfan> maybe try 10khz to start
Jan 27 22:06:55 <mreimer1> someone else has this working with a jtagkey (not 2) with the same hardware as I do, just not using openocd
Jan 27 22:08:11 <mreimer1> same with jtag_khz 10
Jan 27 22:10:23 <atiti> sounds to me like something is physically wrong
Jan 27 22:10:54 <atiti> as long as openocd detects the jtagkey, and your pxa3xx is set as the target, you should be able to enumerate it at least
Jan 27 22:11:00 <mreimer1> probably something physically wrong with the operator :-)
Jan 27 22:11:07 <mreimer1> that's what I thought
Jan 27 22:11:32 <atiti> can you also pastebin the full log?
Jan 27 22:11:40 <mreimer1> sure
Jan 27 22:12:03 <mreimer1> this is 0.4.0 btw. Is that recent enough?
Jan 27 22:12:56 <mreimer1> http://pastebin.com/5ikJhxY4
Jan 27 22:14:25 <mreimer1> regarding srst, this device's connector has five unlabeled pins, which I'm guessing are for JTAG. Does that give any clues?
Jan 27 22:14:43 <atiti> do you have the 20 pin connector?
Jan 27 22:15:11 <mreimer1> yes
Jan 27 22:16:03 <mreimer1> with a special converter box from the manufacturer (splits out usb, serial and JTAG, plus does level translation or something)
Jan 27 22:16:58 <mreimer1> maybe something's wrong with this converter box
Jan 27 22:17:22 <atiti> maybe
Jan 27 22:45:20 <mreimer1> Looks like this connector doesn't connect nTRST. Is that a problem?
Jan 27 22:46:41 <atiti> reset_config srst_only then
Jan 27 22:47:28 <mreimer1> same
Jan 27 22:48:00 <mreimer1> I'll contact the manufacturer
Jan 27 22:56:39 <roxfan> can you try some other software?
Jan 27 22:57:14 <mreimer1> A coworker has something else. Hopefully I'll hear back from him soon.
Jan 27 22:57:26 <mreimer1> Thanks for your help! gotta run
**** ENDING LOGGING AT Fri Jan 28 02:59:56 2011