**** BEGIN LOGGING AT Fri Mar 11 02:59:57 2011 Mar 11 15:09:11 hi Mar 11 15:11:03 i am trying to flash wrt54gV1 with the openmoko debug board. i have problems with "IR capture error at bit 5, saw 0x01 not 0x...3" Mar 11 15:11:35 s/wrt54gV1/wrt54gV5 Mar 11 17:18:30 that usually means the config file for the IR bitmask and stuff is wrong, in my experience. Mar 11 17:18:55 Do you have reason to believe that the openmoko debug board will work with a wrt54Gv5? Mar 11 17:19:16 (as i hapens I own both of those things - I woundl't have thought to connect them together :-) Mar 11 17:20:07 pwgen: ^ Mar 11 18:21:51 iused irlen=5 , that seems to be wrong with irlen=32 this part starts working. Mar 11 18:22:49 but now i got DMA Read Addr = ff300000 Data = ERROR ON READ errors. Mar 11 18:32:48 Hi, could someone tell me what happens with regards to JTAG and CPU clock frequency. I'm on an LPC1769, my code switched the CPU frequency from 4MHz to 120MHz, and it appears flash programming stops working Mar 11 18:33:28 this is with openocd and an olimex-jtag dongle **** ENDING LOGGING AT Sat Mar 12 02:59:57 2011