**** BEGIN LOGGING AT Tue Feb 14 02:59:56 2012 Feb 14 04:14:48 Yeah it's dead in here. Hey, OpenJTagers, look at this:http://www.glynstore.com/ftdi-usb-mpsse-interface-cables/ Feb 14 04:15:30 how well in the FTDI JTAG MPSSE mode supported in OpenJTAG? Feb 14 04:16:05 in = is Feb 14 04:25:12 http://openocd.zylin.com/#/c/451/ Feb 14 05:12:07 oh unreal, 2 days ago too. thanks for the headsup Feb 14 05:13:03 that makes for fast yet cheap ARM jtag devel. Feb 14 16:38:29 Roklobsta: FTDI MPSSE has always been supported in OpenOCD Feb 14 16:39:11 the recent patch is just my rewrite of the driver because the old one sucked Feb 14 16:40:11 There are plenty of cheap FT2232 based adapters available Feb 14 22:51:47 Nattgris: fantastic. I have a 232H (480Mbit/30MHz JTAG) which I have used on AVRDude in SPI mode. Feb 14 23:04:29 I don't know if any of the supported adapters use the 232H, the 2232H works anyway, I have an Olimex ARM-USB-OCD-H Feb 14 23:05:46 I suppose the only difference is that 232H only has one channel? Feb 14 23:06:21 The pre-H 232 didn't have MPSSE AFAIK Feb 14 23:35:04 the 232H has one channel but the 2232H and 4232H all support high speed USB and a 30MHz bit clock instead of the old 6MHz clock. Feb 14 23:35:58 I have used the 232H for SPI work (http://helix.air.net.au/helix/index.php/avrdude-and-ftdi-232h/) and I'd be glad to reuse it for JTAG too. Feb 14 23:43:37 we are planning an adapter for the flyswatter2 to add ISP support as well as protoarea for doing i2c/spi **** ENDING LOGGING AT Wed Feb 15 02:59:57 2012