**** BEGIN LOGGING AT Thu Nov 18 02:59:58 2010 Nov 18 06:56:28 PaulFertser: gta01 uImage is now in http://build.shr-project.org/shr-kms/om-gta01/ and I can confirm that gta02 version from om-2.6.34 branch boots OK Nov 18 07:00:14 JaMa|Zzz: hello :) Nov 18 07:00:46 JaMa|Zzz: what should i check when i have time? Touchscreen. Nov 18 07:02:57 yes, TS would be important if it's used there :) Nov 18 07:03:32 also there wasn't ie BT enabled Nov 18 07:04:08 morgen Nov 18 07:04:53 moin Nov 18 07:05:06 JaMa|Zzz: I'm seeing recoverable WS with the latest kernel Nov 18 07:05:31 zub: mrmoku reported the same :/ Nov 18 07:06:22 @least they are recoverable :) Nov 18 07:07:30 and witnessed this slooowing doewn to halt with running from SD Nov 18 07:08:35 but each time I notice, it's too late to ssh in/copy log Nov 18 07:09:20 it seems like no new process can be started even though old ones are somewhat running Nov 18 07:09:37 and phone replies to pings Nov 18 07:10:27 that looks like old rootfs RO problem.. Nov 18 07:11:23 Stupid morons, why can't they manage their billing without that stupid disconnect every 24hrs :| Nov 18 07:12:51 zub: here is diff to previous kernel http://www.mail-archive.com/shr-user@lists.shr-project.org/msg06229.html nothing which should cause wsod.. so only that xf86-video-glamo change :/ Nov 18 07:13:41 maybe it was there and just didn't happen, it's diff. to reproduce Nov 18 07:14:42 what were the kernels in past? .34 now, 32 beforr, and before 30 & 29? Nov 18 07:16:18 * zub is walking to work, so googling is not to feasible Nov 18 07:16:46 but neither is IRCing :) Nov 18 07:18:03 * JaMa|Wrk should be on his way to work already (or better half an hour ago) .. :/ Nov 18 13:39:49 hi, I just upgraded to the newest SHR image Nov 18 13:40:03 and can't find a way to switch windows :) Nov 18 13:40:42 cargill: you need to run shr_elm_softkey Nov 18 13:42:46 sweet, thanks, where do I stick it so that it runs every time enlightement runs? Nov 18 13:43:43 cargill: usally it's started automatically Nov 18 13:44:44 but if you upgrade from a really old version, then the autostartfile isn't create, because .e already exists Nov 18 13:45:21 oh, so it has something to do with my backing up of $HOME? Nov 18 13:45:28 cargill: yes Nov 18 13:45:52 that file is created from skeleton Nov 18 13:47:36 ok, everytime I upgrade this partition, I copy the home over from the old version, so it is about a year old now Nov 18 13:47:54 should I remove it and replace from the skeleton? Nov 18 13:48:25 cargill: look at /etc/skel there you should find that file Nov 18 13:48:33 you can copy it from there Nov 18 13:49:04 thanks Nov 18 13:50:25 and then echo g > /proc/sysrq-trigger ? Nov 18 13:50:48 is there a more graceful way to restart everything? Nov 18 13:50:59 cargill: ``reboot'' Nov 18 13:51:11 cargill: shutdown -r now Nov 18 13:51:27 cargill: telinit 6 Nov 18 13:52:16 does shr ship http://git.bitwiz.org.uk/?p=mesa.git;a=summary ? Nov 18 13:52:37 pabs3: yes Nov 18 13:52:42 PaulFertser: well, i wanted to restart Xorg, or just enlightement Nov 18 13:53:04 pabs3: though it doesn't really do anything.. Nov 18 13:53:06 /etci/nit.d/xserver-nodm restart Nov 18 13:53:54 hmm ok Nov 18 13:54:14 or echo k >/proc/sysrq-trigger, thats the more or less the same (minus my previous typo, of course) Nov 18 13:55:06 of course, if the kernel was compiled with sysrq :) Nov 18 13:55:23 which it isn't Nov 18 14:55:46 PaulFertser: I've compiled a 34 kernel for the gta01. Do you know an apropiate rootfs to test it? (currently I'm using an om-2007 one for buildhost.it ) Nov 18 14:57:38 hello everu one Nov 18 14:58:37 already asked onto webos-internal, does some one know of to fiw app catalog/reware to be able to to install apps again. like an apt-get -f Nov 18 14:59:15 jluis: in few minutes there will be new SHR gta01 images with that kernel already used Nov 18 14:59:26 jluis: would be great if you can test it for me Nov 18 15:00:27 cargill: you have to remove .e and it's not in /etc/skel Nov 18 15:01:37 cargill: it's created from shr-wizard code (which is called on first run) Nov 18 15:03:32 cargill: also make sure you have /var/volatile/appshadow (in case you restored also volatile cache from old backup) Nov 18 15:04:46 JaMa|Wrk: yes, i noticed, copied over the tar.gz again, left it to run the wizard, then killed the wizard as it locked up, rebooted and it works Nov 18 15:05:38 JaMa|Wrk: /var/volatile/appshadow is on a ramdisk Nov 18 15:05:57 so it is there Nov 18 15:06:07 yes but created during startup only if there is no volatile cache from before Nov 18 15:06:21 oh, i see Nov 18 15:07:03 does your gps work with shr? Nov 18 15:07:44 if you're using fixed u-boot or qi then yes even after suspend/resume Nov 18 15:07:53 otherwise only before first suspend IIRC Nov 18 15:12:37 jluis: full image already done http://build.shr-project.org/tests/shr-unstable/images/om-gta01/ Nov 18 15:21:15 how is choosing which uSD partition to boot from done in Qi? haven't really familiarized myself with that (and cannot find a recent u-boot image) Nov 18 15:21:35 s/partition/uImage/ Nov 18 15:21:36 cargill meant: how is choosing which uSD uImage to boot from done in Qi? haven't really familiarized myself with that (and cannot find a recent u-boot image) Nov 18 15:22:28 cargill: read Qi wiki page Nov 18 15:22:39 in short with AUX button Nov 18 15:26:01 ouch, that means reordering the partitions Nov 18 15:34:54 cargill: patch for u-boot was on ML Nov 18 15:35:11 cargill: maybe also link for binaries with it applied Nov 18 15:37:00 JaMa|Wrk: kernel boots (my compilation) and I see the 2007.2 welcome screen. I will test now your rootfs & kernel Nov 18 15:41:33 cargill: http://www.mail-archive.com/openmoko-kernel@lists.openmoko.org/msg10843.html Nov 18 15:43:11 jluis: great Nov 18 16:01:29 jluis: found small issue already, some modules in image are still from 2.6.29 (ie when there is no such module from .34) modules for leds and g_ether are not loaded by default, building newer image atm Nov 18 16:23:55 JaMa|Off: there's no leds/vibrator at all on gta01 Nov 18 16:30:57 good evening! shouldn't the issue, that illume bar is shown over idle_screen be fixed? Nov 18 16:33:19 JaMa|Off: I have a harware problem with my gta01 usb and g_ether is of no use to me Nov 18 16:33:36 * jluis plans refesh my debug-board skills Nov 18 17:09:08 ouch Nov 18 17:09:23 on fso we have the same spam than on htc-linux.org Nov 18 17:14:43 mickeyl, who has admin access on the fso wiki? Nov 18 18:08:58 PaulFertser: ah, then I should update defconfig a bit :) Nov 18 19:58:18 JaMa: hi, i probably missed the gta01 discussion, are there sources for gta01 kernel somewhere now? Nov 18 20:11:50 radekp: git.om.org Nov 18 20:12:11 radekp: shr builds already have it included Nov 18 20:15:42 2.6.37-rc2-00039-g5261379 + "sched: auto" and I didn't even notice that build is running :) Nov 18 20:15:55 great Nov 18 20:16:43 but bad news is that cdc_ether is somehow messed and cannot reconnect neo without pc reboot :/ Nov 18 20:16:52 unregister_netdevice: waiting for eth1 to become free. Usage count = 1 Nov 18 20:17:38 hi mrmoku Nov 18 20:18:01 could you push to the correct branch and ask mickeyl to delete the old branch for the n900 kenrel Nov 18 20:21:17 JaMa: ahh great, thanks Nov 18 20:38:36 GNUtoo|laptop: I can try :-) Nov 18 20:39:02 ok Nov 18 20:39:14 next someone(you or me) should create a recipe for linux-n900 Nov 18 20:39:19 or linux-nokia900 rather Nov 18 20:39:32 yeah... that would have been my next question :) Nov 18 20:39:40 if we already use it :P Nov 18 20:45:15 GNUtoo|laptop: what about your battery branch? Nov 18 20:45:26 power kernel contains some bq27xx work too Nov 18 20:45:31 mrmoku, I'll test it when I've the time Nov 18 20:45:36 ok Nov 18 20:45:37 ah ok Nov 18 20:45:42 battery is a branch Nov 18 20:45:45 as it suggest Nov 18 20:45:58 I'll look at your new branch Nov 18 20:46:01 for the battery Nov 18 20:46:25 grrr Nov 18 20:46:42 | arm-oe-linux-gnueabi-g++: .../armv7a-oe-linux-gnueabi/lib/libgcrypt.so: No such file or directory Nov 18 20:46:57 GNUtoo|laptop: 1e21b8714c88bc4e43e46f2112264fab6a49df13 Nov 18 20:47:02 | arm-oe-linux-gnueabi-g++: .../sysroots/armv7a-oe-linux-gnueabi/lib/libgpg-error.so: No such file or directory Nov 18 20:47:04 ah? Nov 18 20:47:06 I'll look Nov 18 20:47:20 1e21b8714c88bc4e43e46f2112264fab6a49df13 is in oe? Nov 18 20:47:26 no fso-kernel Nov 18 20:47:29 ok Nov 18 20:47:51 the oe error is /me trying again to make sflphone work Nov 18 20:47:55 if we get slphone Nov 18 20:48:01 we can have sip in fso later Nov 18 20:48:11 ohhh Nov 18 20:48:20 * mrmoku is very much looking forward to sflphone :D Nov 18 20:48:24 indeed Nov 18 20:48:34 last time I tried I had the same error Nov 18 20:48:42 libs/pjproject Nov 18 20:48:44 compiled fine Nov 18 20:49:26 but sflphone-common does that: Nov 18 20:49:38 checking for ZRTPCPP... configure: error: Package requirements (libzrtpcpp >= 1.3.0) were not met: Nov 18 20:49:45 zrtpcpp is in oe Nov 18 20:49:49 JaMa: btw i have applied patch from gena2x for GPS+uboot+resume problem Nov 18 20:49:52 but fails with the above errors Nov 18 20:50:04 that is to say: Nov 18 20:50:08 | arm-oe-linux-gnueabi-g++: /home/gnutoo/embedded/oe/oetmps/nokia900/sysroots/armv7a-oe-linux-gnueabi/lib/libgcrypt.so: No such file or directory Nov 18 20:50:08 | arm-oe-linux-gnueabi-g++: /home/gnutoo/embedded/oe/oetmps/nokia900/sysroots/armv7a-oe-linux-gnueabi/lib/libgpg-error.so: No such file or directory Nov 18 20:50:10 JaMa: but not tested except that it boots, since i am using qi now Nov 18 20:50:13 to be more exact Nov 18 20:50:21 JaMa: https://github.com/radekp/linux-2.6/commit/7161f8c8e8df1b0aa13d44ce76f433b8449d3cda Nov 18 20:50:36 radekp: someone reported that with fixed u-boot he didn't need any change in kernel Nov 18 20:50:43 radekp: and I'm also using only Qi Nov 18 20:51:52 JaMa: ahh interesting, btw i can try your GTA01 image now Nov 18 20:52:05 radekp: http://www.mail-archive.com/openmoko-kernel@lists.openmoko.org/msg10846.html Nov 18 20:52:12 mrmoku, fetching fso remote Nov 18 20:52:15 for the kenrel Nov 18 20:52:18 radekp: would be great Nov 18 20:52:53 (gta01 image) It's highly unlikely to work :( but at least serial console output would probably help to do something about it. Nov 18 20:53:06 mrmoku, do you know who is admin in the fso wiki? Nov 18 20:53:15 because there is huge spaming there Nov 18 20:53:31 same user Nov 18 20:53:36 example: http://wiki.freesmartphone.org/index.php/Implementations Nov 18 20:55:24 GNUtoo|laptop: my guess would be mickeyl Nov 18 20:55:34 ok Nov 18 20:55:44 but he was not there when I tried to contact him Nov 18 20:55:51 maybe I should send a mail? Nov 18 20:56:48 ahhh Nov 18 20:56:57 .../lib/... Nov 18 20:57:03 and not .../usr/lib/... Nov 18 21:04:08 hmm i tried just kernel on gta01 and it does not seem to do anything after printing "Booting kernel ..." Nov 18 21:06:56 jluis|away reported that his build booted ok, so maybe I've messed something in defconfig Nov 18 21:08:27 GNUtoo|laptop: mail probably is good Nov 18 21:08:50 ok Nov 18 21:08:57 we could share efforts with htc-linux Nov 18 21:09:06 they have the exact same problem Nov 18 21:09:15 private mail or mailing list? Nov 18 21:09:21 if so which mailing list? Nov 18 21:09:40 a private mail to mickeyl for a start? Nov 18 21:10:13 GNUtoo|laptop: will force push nokia900/master now with the three commits on top of the power-kernel Nov 18 21:10:22 ok Nov 18 21:10:49 I'm more for mailing lists but I don't know where to send Nov 18 21:10:53 smartphones-spam? Nov 18 21:11:01 userland maybe Nov 18 21:16:16 GNUtoo|laptop: where is that spam? Nov 18 21:16:53 ahh...ok Nov 18 21:17:00 # Evubofupo (Talk | contribs) Nov 18 21:17:02 it's a bit hiden Nov 18 21:17:05 *hidden Nov 18 21:17:05 yes Nov 18 21:17:12 I'm writing the mail Nov 18 21:17:15 ok Nov 18 21:17:16 while it compiles Nov 18 21:17:32 | /usr/lib/libdl.so: file not recognized: File format not recognized Nov 18 21:17:33 hmmm Nov 18 21:17:35 libtool Nov 18 22:02:48 JaMa left :( **** ENDING LOGGING AT Fri Nov 19 02:59:58 2010