**** BEGIN LOGGING AT Mon Dec 06 02:59:57 2010 Dec 06 06:31:23 pespin: great... will apply them when I come back (if JaMa|Off does not beat me... as he's usually faster than me :P) Dec 06 06:38:19 not today :) Dec 06 06:38:44 still away.. and will leave to work in few minutes Dec 06 06:39:20 but I would put those to e-wm directory instead of shr (as they are not so SHR specific) Dec 06 08:33:08 morning Dec 06 08:33:12 mrmoku, morning Dec 06 08:36:51 daniele_athome: are you familiar with the modem_singleline plugin in cornucopia? Dec 06 08:37:03 Lopi, no Dec 06 08:40:42 mrmoku: I'm ready, should I push those? :) Dec 06 08:40:48 moin Dec 06 08:43:33 JaMa, hi Dec 06 08:43:39 i have a couple of patches :) Dec 06 08:51:15 JaMa: i knew you will be faster Dec 06 08:51:49 * mrmobil waiting for his car to get a particle filter installed Dec 06 08:52:21 JaMa: so feel free to push :) Dec 06 08:53:13 at least they offer me free coffee :) Dec 06 08:53:22 Anyone familiar with the fsogsmd modem_singleline plugin in cornucopia? Dec 06 08:53:25 morning daniele_athome Dec 06 08:53:32 mrmobil: oki :) Dec 06 08:53:37 rebuild finished? Dec 06 08:53:49 daniele_athome: I know, that's what we're talking with mrmobil Dec 06 08:53:57 JaMa, ah lol :D Dec 06 08:54:55 mrmoku, this morning i tried a phone call as soon as the phone resumed from suspend Dec 06 08:54:57 it hanged Dec 06 08:55:04 fsogsmd didn't log anything Dec 06 08:55:12 :/ Dec 06 08:55:38 Told ya Dec 06 08:55:43 to make it work i have to wait 10-15 seconds after resume Dec 06 08:56:05 which is bad for incoming calls Dec 06 08:56:11 mrmobil, i guess so Dec 06 08:58:38 daniele_athome: do you have pin enabled? Dec 06 08:58:41 mrmobil, no Dec 06 08:59:07 did fsogsmd segfault? Dec 06 08:59:12 mrmobil, no Dec 06 08:59:20 when i tried killall fsogsmd Dec 06 08:59:34 it terminated "correctly" logging the shutdown Dec 06 08:59:39 but anything on the call Dec 06 08:59:43 mrmobil, could this be a dbus issue? Dec 06 09:00:13 sure? it will immediately get dbus-activated after a segfault Dec 06 09:00:32 and without pin you might not even notice Dec 06 09:00:35 mrmobil, logging nothing? Dec 06 09:00:36 mmm Dec 06 09:00:55 in fsogsmd.log you can see it Dec 06 09:01:36 mrmobil, wait i'll send you Dec 06 09:02:17 well can't check now Dec 06 09:02:32 mrmobil, anyway at first look i can't see any strange line Dec 06 09:02:43 concerning about fsogsmd restart Dec 06 09:03:00 it would hav the binary started twice in the log Dec 06 09:03:58 mrmobil, no match Dec 06 09:04:04 ok Dec 06 09:05:04 it contains some numbers so i've wrote the url in private message Dec 06 09:05:14 hmm... that thing will be difficult to tackle :/ Dec 06 09:07:52 daniele_athome: you have that repeatable on every reume when trying to call immediately? Dec 06 09:08:04 mrmobil, of course Dec 06 09:08:07 it happens all the time Dec 06 09:08:18 mrmobil, when i have time i'll enable debug logging of fsogsmd Dec 06 09:08:22 and do some deeper analysis Dec 06 09:08:45 ah mrmobil i use mokosuite but i don't think it's an issue Dec 06 09:08:49 doesn't it? Dec 06 09:09:56 pespin_: why did you add efenniht themes as separate recipes when they can be built as part of e-wm/elementary recipe? Dec 06 09:15:02 car finished Dec 06 09:15:10 going home Dec 06 09:15:29 bbl Dec 06 10:04:05 radekp: great! radekp/qtmoko-v30 is really the same except config, feel free to merge your .config to arch/arm/configs/gta02_defconfig (which is now the same as SHR config but without DRM, but your config will be better there) Dec 06 10:06:12 JaMa: hi, oki, i'll do Dec 06 12:33:11 hi mrmoku Dec 06 12:50:30 mrmoku ? Dec 06 12:51:28 Ainulindale, ? Dec 06 12:51:46 mrmoku, is someone Dec 06 12:51:55 That's why I'm asking if he's there. Dec 06 12:51:58 Other question? :-) Dec 06 12:52:00 ah ok Dec 06 12:52:16 I didn't understand the ? Dec 06 12:52:20 sorry Dec 06 12:52:57 :-p Dec 06 12:57:13 mrmoku: I need to check if you truly asked the transfer from PSI USA Dec 06 12:57:20 mrmoku: if that's the case I can accelerate it Dec 06 13:25:20 Ainulindale: I think so... my colleague mailed me that it's 'pending_irtp' Dec 06 13:25:24 whatever that means Dec 06 13:25:34 probably giving you some time to NACK the transfer Dec 06 13:28:58 mrmoku, http://wiki.freesmartphone.org/index.php/Hardware/N900/TODO updated for audio routing issues with volume Dec 06 13:29:24 also should I switch n900 to my modem plugin if it works better(no pin) Dec 06 13:29:34 no segfault also Dec 06 13:29:43 and no fake provider Dec 06 13:29:52 that could confuse people Dec 06 13:30:28 mrmoku: ok so I'm validating the transfer Dec 06 13:30:40 Ainulindale: great, thanks Dec 06 13:30:57 GNUtoo|laptop: ok, will take a look... after unpacking my brand new 2TB disk ;) Dec 06 13:31:09 it's a desktop disk? Dec 06 13:31:16 yup Dec 06 13:31:18 ok Dec 06 13:31:23 for my desktop... a desktop disk :-) Dec 06 13:32:28 who want's new efl beta3? :) Dec 06 13:33:08 JaMa, what's better? what new bugs were introduced? Dec 06 13:33:20 heh Dec 06 13:33:34 wanted to ask the same ;) Dec 06 13:34:03 * GNUtoo|laptop tested the elmentary test last night Dec 06 13:34:05 sofar I have it only built and installed on gta02.. so not tested, but changelog looks like mostly fixes Dec 06 13:34:08 and it's fast...on the n900 Dec 06 13:40:22 hehe, just I ran into a sheet of paper I wrote some notes regarding GTA04-II product specs and design, some years ago, when GTA04 was Steve's and my baby Dec 06 13:41:15 unborn baby unfortunatelly Dec 06 13:41:21 yup Dec 06 13:42:15 specs are amazingly close to those of N9 :-) Well, at least with respect to product features Dec 06 13:43:31 Alas we had one problem to deal with: we were supposed to use GTA01/02 case :-o Dec 06 13:44:17 so it looks actually quite similar to what's gta04 today :-D Dec 06 13:44:38 but with a few nice extensions Dec 06 13:44:44 * mrmoku wonders how one can integrate a keyboard there :P Dec 06 13:44:55 you can't Dec 06 13:45:02 that's what I meant Dec 06 13:45:24 or at least it's incredibly hard and also clumsy Dec 06 13:46:33 I planned for a short while to have an ultraslim low profile hw kbd on backside Dec 06 13:46:50 mounted on top of battery cover Dec 06 13:47:08 but that wasn't really a good mechanical design Dec 06 13:47:44 and also not usable on the go, only on a table as support Dec 06 13:48:26 Ainulindale: got a mail now, that the transfer was successfully started :) Dec 06 13:48:41 Good :-) Dec 06 13:48:58 Next thing will be your transfer of a huge sum to my bank account Dec 06 13:49:07 Something with lots of zeroes preceded by a 1 Dec 06 13:49:10 I'd be glad Dec 06 13:49:18 nah... that's not what we said Dec 06 13:49:20 :-) Dec 06 13:49:23 ie 1.00000000000? Dec 06 13:49:26 we we're talking about you paying me for taking it over ;) Dec 06 13:49:32 hahaha Dec 06 13:49:42 So I can procrastinate in peace? Dec 06 13:49:54 no Dec 06 13:50:05 what's all theses transferts? Dec 06 13:50:10 there are still things under your control only :P Dec 06 13:50:16 Oh? Dec 06 13:50:18 Which one? Dec 06 13:50:24 GNUtoo|laptop: Ainulindale wanted to get rid of the shr-project.org domain Dec 06 13:50:30 Ainulindale: the mailing lists Dec 06 13:50:38 Well I lost all accounts Dec 06 13:50:41 So no :-) Dec 06 13:50:45 hehe, ok Dec 06 13:50:52 nobody has control then :P Dec 06 13:50:52 (got an electrical surge) Dec 06 13:51:01 (borked the hard drive AND the backup) Dec 06 13:51:25 And I didn't want to "get rid" of the domain, just pass it over to someone who actually managed SHR these days :-) Dec 06 13:51:48 Ainulindale: sure :) Dec 06 13:52:19 ok Dec 06 14:09:18 mrmoku: you know those toslink 3.5mm combi-plugs? Dec 06 14:09:30 DocScrutinizer: no Dec 06 14:10:15 you can plug in a standard 3.5mm headset, or a plastic 3.5mm plug with glass fibre toslink Dec 06 14:10:58 ok Dec 06 14:11:27 mrmoku: (though we had the order to use gta02 case, we were free to drill in any holes we like :-P) Dec 06 14:11:40 (for gta04) Dec 06 14:11:43 :) Dec 06 14:12:18 even for a proper barel plug charger receptacle Dec 06 14:12:43 heard N8 has it too :-D Dec 06 14:12:55 finally Dec 06 14:13:34 they noticed USB charging is mandatory for EU and Chine, but not mutually exclusive with a decent power connector Dec 06 14:14:01 \o/ Dec 06 14:15:51 audio concept (mechanical) was epic - though I'm not sure it could ever be built like what we dreamt of Dec 06 14:16:43 even with plenty of holes in case I would still prefer qwerty keyboard :) Dec 06 14:17:36 or at least enough button for magic sysrq Dec 06 14:17:58 hehe, yes. Well the idea to have a 2mm thick flip-out kbd plumbed on outside of battery cover still isn't completely dead Dec 06 14:19:23 we planed a universal expansion bus connector inside battery compartment, so the cover could easily connect to that Dec 06 14:20:50 also some dozen of gold plated sensor switches were planned for all around the side of the case Dec 06 14:22:10 nice!!! intone will become more usable: http://code.google.com/p/intone/issues/detail?id=23 Dec 06 14:22:30 what's intone? Dec 06 14:22:38 an efl music player Dec 06 14:22:51 it's shipped by default in shr-image Dec 06 14:22:57 aah Dec 06 14:23:01 pity that not many commits from cchandel lately Dec 06 14:23:11 that thing that never worked for me Dec 06 14:24:08 ventura webkit-efl api bug is opened for > 4 months.. :/ Dec 06 14:24:21 almost time to remove it from task-shr-feed.. Dec 06 14:32:31 mickey|office, hi Dec 06 15:15:41 JaMa: btw. we have a problem with u-boot not passing atags to our kernel Dec 06 15:27:37 JaMa: maybe it's as easy as adding 'setenv atags 0x8200000c' to the boot script Dec 06 15:27:54 * mrmoku will try that Dec 06 15:29:49 you mean with stskeeps's u-boot binary too? Dec 06 15:30:19 yup Dec 06 15:30:35 it seems to set it only when not booting from mmc Dec 06 15:30:51 maybe the new kernel does not need that... dunno Dec 06 15:31:56 quit Dec 06 15:31:59 mrmoku: it's only in "run noloboot" Dec 06 15:32:02 heh Dec 06 15:32:08 yup Dec 06 15:32:35 but you can add it as setenv atags ${nolo_atagaddr}; Dec 06 15:32:44 yup, did just that Dec 06 15:33:01 ah ok :) Dec 06 15:33:42 JaMa: is it possible to make OE build both - zimage and uimage? Dec 06 15:34:55 well if you revert that KERNEL_TYPE change to zImage and then call mkimage manually Dec 06 15:35:03 don't know if there is better way Dec 06 15:35:08 hmm... ok Dec 06 15:36:36 but ie u-a postinst will be broken Dec 06 15:36:47 "broken" Dec 06 15:37:30 is it enough to skip the uboot header to get a zimage again? Dec 06 15:38:02 JaMa: no, did not work :/ Dec 06 15:38:32 you can try this http://buffalo.nas-central.org/wiki/How_to_Extract_an_uImage Dec 06 15:39:05 nice, thanks Dec 06 15:39:54 JaMa: this is what I tried http://paste.pocoo.org/show/301362/ Dec 06 15:40:11 btw any opinion on 0x38000 or 0x40000 offset in u-boot? Dec 06 15:40:33 metan u-boot is using 0x38000, stskeeps's board config 0x40000 Dec 06 15:40:46 hmm... no opinion Dec 06 15:40:51 we should pick one to became majority :) Dec 06 15:40:58 hehe Dec 06 15:45:56 hmm... might be my u-boot is without CONFIG_CHAINLOADER Dec 06 15:47:34 mrmoku: http://gitorious.org/~jama/angstrom/jama-shr-experimental/commit/5a378bb72e1fd657f97b8653be67b5dfaccf6955 Dec 06 15:47:44 mrmoku: that's what I have on top of your patch Dec 06 15:48:06 so yes looks like it Dec 06 15:48:37 no Dec 06 15:48:57 JaMa: hmm... my patch includes that too Dec 06 15:49:03 ah now I see Dec 06 15:49:39 and CONFIG_CHAINLOADER is defined fixed for rx-51 Dec 06 15:49:46 so that can't be the reason :/ Dec 06 15:49:55 include/configs/nokia_rx51.h:#define CONFIG_CHAINLOADER 1 /* Loaded by NOLO */ Dec 06 15:59:44 ok, same with u-boot from stskeeps Dec 06 16:00:27 and how do you "detect" missing atags? Dec 06 16:01:50 ohh... ouch Dec 06 16:01:53 * mrmoku stupid Dec 06 16:02:06 JaMa: alsamixer hangs and gives me a kernel oops Dec 06 16:02:30 but I somehow failed copying the new boot.scr :P Dec 06 16:15:46 JaMa: hmm... it sets the atags now... but does not boot anymore Dec 06 16:16:36 booting shr right? Dec 06 16:16:39 yup Dec 06 16:16:58 loads the kernel... screen is dark... and after a while I'm back to u-boot Dec 06 16:18:07 do you have enabled debug messages to console in kernel? Dec 06 16:18:29 but looks similar to what I have with my combined.bin.. Dec 06 16:28:54 mrmoku: btw you're using git svn for enlightenment right? I've started clone (only trunk) about half an hour ago and it's still running :/ iirc svn co was a bit faster Dec 06 16:29:14 ah it's cloning whole history :) Dec 06 16:29:50 JaMa: hehe, yeah Dec 06 16:29:57 you better specify a minimum rev Dec 06 16:30:09 and even then... it was cloning over night for me :P Dec 06 16:30:44 (debug) don't think so Dec 06 16:31:20 hi! Dec 06 16:31:23 it does not support --depth :/ Dec 06 16:31:38 did someone have a look at efenniht recipes I sent? Dec 06 16:32:43 someone updated and pushed them Dec 06 16:33:28 oh great :) Dec 06 16:33:45 JaMa: hmm... I could push it to our git... what do you think? Dec 06 16:34:05 mrmoku: e? Dec 06 16:34:22 yup Dec 06 16:34:35 0022 mok@gonzales[pts/1]:~/src/openmoko-> du -sh e Dec 06 16:34:36 869M e Dec 06 16:34:36 I've removed e and "mv e-svn e" Dec 06 16:35:00 so I can live with svn checkout a bit longer.. Dec 06 16:35:34 as we will still use upstream svn repo in OE then pusing to our git is not needed imho Dec 06 16:36:27 nah, just meant for us to look at Dec 06 16:36:29 not for building Dec 06 16:36:32 btw. Dec 06 16:36:37 -r 40000:HEAD Dec 06 16:36:49 is the way how to limit the revisions with git svn clone Dec 06 16:37:20 good to know, thank Dec 06 16:37:21 s Dec 06 16:38:08 yw Dec 06 16:38:37 it helped me a lot to be able to browse history with git while searching for that toolbar thing :-) Dec 06 17:43:43 JaMa, ping Dec 06 17:43:52 pong Dec 06 17:44:46 JaMa, would you mind to include librest in shr-u feed? Dec 06 17:44:56 i'm going to post an app of mine using that lib very soon Dec 06 17:45:33 is it enough if I build it manually and then it will be pulled to feed by that app you're posting? :) Dec 06 17:45:43 JaMa, ah ok Dec 06 17:45:46 didn't know that :) Dec 06 17:46:47 * JaMa building Dec 06 17:48:39 but be aware that I've changed librest version a bit.. so better rebuild against current OE HEAD first Dec 06 17:52:19 JaMa, how much is "a bit"? :) Dec 06 17:52:25 *:P Dec 06 17:53:53 PE bump, git${SRCRE} -> gitr${SRCPV} Dec 06 17:53:55 +V Dec 06 17:54:22 so it's same source but different version for opkg Dec 06 17:58:25 JaMa: hmm... I think the atags will be overwritten by the kernel when booting from mmc Dec 06 17:58:48 hmm... or not Dec 06 18:02:50 wow in #freesmartphone.org, PuffTheMagic just made wifi work on the palm-pre Dec 06 18:18:57 daniele_athome: librest in feeds Dec 06 18:19:04 JaMa, thanks! :) Dec 06 18:19:25 i will consider an upgrade in the future Dec 06 18:31:40 JaMa: you still have 2.6.35 for SHR on n900? Dec 06 18:32:50 JaMa: I'm trying to understand how meego get's the atags... or if that isn't needed for the newer kernel Dec 06 18:33:14 have to read good night story... bbiab Dec 06 18:33:46 yup I have Dec 06 18:53:36 JaMa: could you try if alsamixer works for you? Dec 06 19:00:24 http://www.google.com/nexus/tech-specs.html#!/features Dec 06 19:01:51 * mrmoku thought nexus is dead Dec 06 19:02:13 this is the nexus s Dec 06 19:02:53 ahh Dec 06 19:13:02 mrmoku, hi Dec 06 19:13:21 I put all the bugs in the TODO? Dec 06 19:19:17 mrmoku: what exactly do you need with alsamixer? Dec 06 19:19:33 mrmoku: shown ok and I can adjust levels Dec 06 19:19:39 JaMa: anything. It produces kernel oops for him immediately. :) Dec 06 19:19:45 Heinervdm: cornucopia bumped on your request Dec 06 19:20:01 JaMa: thx Dec 06 19:20:11 mrmoku, PaulFertser: so then no oops here :) Dec 06 19:20:37 JaMa: indeed. But mrmoku uses the kernel with u-boot and GNUtoo|laptop says that's due to u-boot not passing ATAGs or something. Dec 06 19:20:52 but I have u-boot too Dec 06 19:20:58 but with 2.6.35 Dec 06 19:21:43 I use the kernel directly and there is an atag thing in uboot but only for the in-memory kernel Dec 06 19:22:08 ah 2.6.35 should work Dec 06 19:27:21 JaMa: just starting it is enough Dec 06 19:27:25 that does not work for me Dec 06 19:27:27 it hangs Dec 06 19:27:32 and dmesg shows the kernel oops Dec 06 19:27:58 two atags are serial and revision Dec 06 19:28:14 I suspect that the sound module in the old kernel checks those Dec 06 19:28:37 and the new kernel might not need them Dec 06 19:28:41 * JaMa booting .28.10 kernel Dec 06 19:28:48 good :) Dec 06 19:29:04 good that "run shr2" is enough :) Dec 06 19:29:10 GNUtoo|laptop: yeah, TODO is good for now Dec 06 19:30:29 oops with .28 too Dec 06 19:30:53 fine... it's not me in the end :P Dec 06 19:31:26 ok Dec 06 19:32:07 it's in rx51_ext_get_volsw right? Dec 06 19:33:13 and fsodeviced Dec 06 19:33:59 actually tpa6130a2_get_volume+0x12/0x40 Dec 06 19:34:41 bbl Dec 06 19:37:55 JaMa: yeah, the client data for tpa6130 doesn't get registered because it doesn't recognise the chip on init (there's a warning in dmesg about that). Dec 06 19:43:55 if (!(machine_is_nokia_rx51() || machine_is_nokia_rx71())) return 0; Dec 06 19:44:17 and after that it inits the audio devices Dec 06 19:47:09 PaulFertser: hmm... where do I find those machine_is_nokia beasts? Dec 06 19:47:15 git grep fails upon me Dec 06 19:47:24 mrmoku: probably in include/ Dec 06 19:48:27 include/asm-arm/mach-types.h:# define machine_is_nokia_rx51() (machine_arch_type == MACH_TYPE_NOKIA_RX51) Dec 06 19:48:30 include/asm-arm/mach-types.h:# define machine_is_nokia_rx51() (0) Dec 06 19:48:31 PaulFertser: thanks Dec 06 19:48:44 normal grep found them :/ Dec 06 19:48:47 mrmoku: yeah, and that is most probably set via ATAGs Dec 06 19:49:30 mrmoku: at least that happen that way on mips machines. Dec 06 19:49:35 mrmoku: hm, no :) Dec 06 19:49:56 mrmoku: mipses do not use ATAGs :))) Dec 06 19:50:19 mrmoku, is there a git tree for our uboot? Dec 06 19:50:30 s/our/our version of/ Dec 06 19:50:31 GNUtoo|laptop meant: mrmoku, is there a git tree for our version of uboot? Dec 06 19:50:36 GNUtoo|laptop: the official git tree + the patches Dec 06 19:50:41 ok Dec 06 19:51:20 mrmoku, indeed it's generated from mach type Dec 06 19:51:28 mrmoku, uboot can even set it Dec 06 19:51:52 Sorry, gotta sleep right now, good night folks :) Dec 06 19:52:01 setenv machid the_id_in_exadecimal_version Dec 06 19:52:25 (I just learned that trick today) Dec 06 19:55:28 if ((system_rev >= 0x08 && system_rev <= 0x13) || /* Macros */ system_rev >= 0x1901) Dec 06 19:55:33 PaulFertser: good night and sleep well :) Dec 06 19:55:46 GNUtoo|laptop: that's from sound/soc/omap/rx51.c Dec 06 19:57:04 GNUtoo|laptop: I think without the revision set via atags 2.6.28 won't work Dec 06 19:57:32 mrmoku, maybe compare 2.6.28 and 2.6.35? Dec 06 19:58:00 GNUtoo|laptop: I would need a meego 2.6.35 for that... which I don't have (yet) Dec 06 19:58:23 just look the sources Dec 06 19:58:26 *look at Dec 06 19:58:44 hmm... I have the meego kernel patches checked out... let me check Dec 06 20:04:35 GNUtoo|laptop: looking at the patches the meego kernel indeed does not look at system_rev Dec 06 20:04:46 ok Dec 06 20:04:53 so you fix uboot? Dec 06 20:05:01 how? Dec 06 20:05:08 what would be the correct fix? Dec 06 20:05:10 try to pass the atags Dec 06 20:05:14 I tried that Dec 06 20:05:17 with the boot.scr Dec 06 20:05:21 ah? Dec 06 20:05:25 but it does not boot then Dec 06 20:05:31 ah? Dec 06 20:05:31 probably it passes the commandline too Dec 06 20:05:38 yes Dec 06 20:05:46 just override the comandline then Dec 06 20:05:48 in the kernel Dec 06 20:06:03 (CONFIG_CMDLINE) Dec 06 20:06:06 hmm... the kernel has a commandline set Dec 06 20:06:22 but it won't respect it if it get's one from outside, no? Dec 06 20:06:35 I think the internal override the external one Dec 06 20:06:41 example: htcdream Dec 06 20:06:55 the bootloader passes some args that we can't change Dec 06 20:07:21 so we can change it in the kenrel or in in the special wrapped image Dec 06 20:08:20 GNUtoo|laptop: hmm... ok... then it goes like this Dec 06 20:08:29 hmm no Dec 06 20:08:50 GNUtoo|laptop: it can't be... because we overwrite the commandline from the u-boot boot script Dec 06 20:09:06 otherwise it would not boot at all Dec 06 20:09:14 as the root is wrong Dec 06 20:09:15 do you want me to try? Dec 06 20:09:32 if you're sure... please yes Dec 06 20:09:45 uboot is in oe? Dec 06 20:09:47 and it boots fine Dec 06 20:09:52 no toolchain issue? Dec 06 20:09:57 because kernel command line is with root=/dev/mmcblk0p1 Dec 06 20:09:59 GNUtoo|laptop: no Dec 06 20:10:07 how do I build it then? Dec 06 20:10:27 no, don't try... too much distraction :) Dec 06 20:10:35 I've nothing to do now Dec 06 20:10:39 ahh, ok :P Dec 06 20:10:49 I could do the libisi recipe tough Dec 06 20:11:15 ok, then do that... and I will try to dig deeper :) Dec 06 20:11:20 ok Dec 06 20:11:26 look at CONFIG_CMDLINE Dec 06 20:11:31 and try it with a working setup Dec 06 20:11:36 just add something useless Dec 06 20:11:43 like mrmoku=1 Dec 06 20:11:54 good idea Dec 06 20:12:09 will add the mrmoku to the bootscript end see if it ends up in cmdline :) Dec 06 20:12:15 s/end/and/ Dec 06 20:12:17 mrmoku meant: will add the mrmoku to the bootscript and see if it ends up in cmdline :) Dec 06 20:12:21 ok Dec 06 20:12:41 there is also CONFIG_CMDLINE from the kernel Dec 06 20:13:08 that would be next... change it in nokia900.conf Dec 06 20:13:22 and see if it get's overwritten by the boot script Dec 06 20:13:29 ok Dec 06 20:14:06 I will add mrmoku to the bootscript and gnutoo to the kernel cmdline :) Dec 06 20:14:13 ok Dec 06 20:14:31 tell me who will win Dec 06 20:14:33 then Dec 06 20:14:48 yep Dec 06 20:23:01 GNUtoo|laptop: btw. JaMa pointed me to http://buffalo.nas-central.org/wiki/How_to_Extract_an_uImage Dec 06 20:23:08 maybe we should add that link to the wiki Dec 06 20:23:41 ok Dec 06 20:29:11 GNUtoo|laptop: root@nokia900 ~ # cat /proc/cmdline Dec 06 20:29:11 snd-soc-rx51.hp_lim=42 snd-soc-tlv320aic3x.hp_dac_lim=6 console=tty1 root=/dev/mmcblk1p2 rootwait panic=20 debug mrmoku Dec 06 20:29:28 brb Dec 06 20:35:39 ok Dec 06 20:36:58 good evening Dec 06 20:38:47 mickeyl, hi Dec 06 20:38:54 I'm waiting for sre to show up for: Dec 06 20:39:09 *he should push his repo Dec 06 20:39:14 *add a copy of the GPL Dec 06 20:41:39 *nod* Dec 06 20:42:02 btw he uses plain Makefiles Dec 06 20:42:02 hmm, ok, here comes the beginner... Dec 06 20:42:11 ? Dec 06 20:42:11 want to login to the n900 to edit the bootmenu Dec 06 20:42:16 ah ok Dec 06 20:42:17 how can i do that? Dec 06 20:42:20 ask mrmoku Dec 06 20:42:24 :) Dec 06 20:42:25 via usb or on the device? Dec 06 20:42:29 ssh Dec 06 20:42:31 trough wifi Dec 06 20:42:35 oh, wifi Dec 06 20:42:37 but install ssh before Dec 06 20:42:39 no usbeth, right? Dec 06 20:42:47 I don't know Dec 06 20:42:50 I only use SHR Dec 06 20:42:56 mickeyl: what do you have installed? Dec 06 20:43:02 u-boot? Dec 06 20:43:14 mrmoku: no, just the n900-bootmenu for a start Dec 06 20:43:22 and mad-developer Dec 06 20:43:35 ahh, n900-bootmenu Dec 06 20:43:54 which means you will be using the maemo kernel for shr Dec 06 20:44:05 n900-bootmenu requires you to use maemo kernel Dec 06 20:44:20 maemo kernel means the same unmodified kernel, not even recompiled Dec 06 20:45:15 mickeyl, btw PuffTheMagic got wifi working on palm-pre Dec 06 20:46:41 using compat wireless, come patches(including morphis patches) Dec 06 20:46:46 s/come/some/ Dec 06 20:46:46 GNUtoo|laptop meant: using compat wireless, some patches(including morphis patches) Dec 06 20:48:29 mickeyl, btw to make a recipe for a software that uses only plain Makefiles I do that Dec 06 20:48:40 //don't inherit autotools Dec 06 20:48:50 oe_runconf(){:} Dec 06 20:48:56 oops Dec 06 20:49:26 s/oe_runconf(){:}/do_configure(){:}/ Dec 06 20:49:39 pretty much, yeah Dec 06 20:49:41 ok Dec 06 20:49:49 but if you're hacking on it, why not converting it to autotools right away? Dec 06 20:49:58 how do I do that? Dec 06 20:50:00 autoscan Dec 06 20:50:09 ? Dec 06 20:50:22 * mickeyl always takes another project and adjusts Dec 06 20:50:35 lol ok Dec 06 20:51:01 what's the entry point for the SD? Dec 06 20:51:02 I don't even know the deps Dec 06 20:51:06 or rather devnode? Dec 06 20:51:11 entry point? Dec 06 20:51:25 isn't entry point for the address where the kernel is loaded from Dec 06 20:51:33 well, mutatis mutandis Dec 06 20:51:41 ITEM_DEVICE="${EXT_CARD}p1" Dec 06 20:51:45 is that sufficient? Dec 06 20:51:55 do i need to press anything to make the menu open? Dec 06 20:52:06 hmmm Dec 06 20:52:09 IIRC you have to open the slider Dec 06 20:52:23 so you folks have u-boot on it? Dec 06 20:52:28 how would i do that? Dec 06 20:52:36 yup, but we have one serious problem Dec 06 20:52:41 you will also need a connected usb cable Dec 06 20:52:52 the 2.6.28 kernel we use needs the atags from the nokia bootloader Dec 06 20:53:02 and passing them does not work yet Dec 06 20:53:10 I'll try Dec 06 20:53:18 but I need a way to build u-boot Dec 06 20:53:29 GNUtoo|laptop: moment Dec 06 20:53:37 ok Dec 06 20:53:40 GNUtoo|laptop: how do you want it? Dec 06 20:53:42 tarball? Dec 06 20:53:47 howto Dec 06 20:53:48 patch on top of official git? Dec 06 20:53:57 and tarball is fine Dec 06 20:54:01 or whatever Dec 06 20:54:05 patch is better tough Dec 06 20:54:14 GNUtoo|laptop: http://build.shr-project.org/tests/mrmoku/n900/u-boot/ Dec 06 20:54:21 ok Dec 06 20:54:28 though don't use the bb :P Dec 06 20:54:40 hmm Dec 06 20:54:42 but take the rev given in there Dec 06 20:54:49 hangs w/ "Booting from shr (mmcblk0p1 ext)... Dec 06 20:54:58 i guess it shouldn't take more than 60 seconds... Dec 06 20:55:05 no Dec 06 20:55:10 mmh Dec 06 20:55:11 I already have theses patches Dec 06 20:55:14 so i did something wrong Dec 06 20:55:14 then what to do? Dec 06 20:55:16 but what... Dec 06 20:55:29 thanks for no error messages *sigh* Dec 06 20:55:30 mickeyl, did you attach an usb cable for booting? Dec 06 20:55:35 yes Dec 06 20:55:38 ok Dec 06 20:56:26 mrmoku, so: Dec 06 20:56:27 GNUtoo|laptop: make nokia_rx51_config Dec 06 20:56:31 *you don't have more patches Dec 06 20:56:35 no Dec 06 20:56:40 *what compiler should I use? Dec 06 20:56:46 I know how to build it Dec 06 20:56:51 ahh, ok :) Dec 06 20:56:52 but what compiler should I use Dec 06 20:56:59 I installed the old openmoko toolchain Dec 06 20:57:00 that's the problem Dec 06 20:57:04 ok Dec 06 20:57:22 mickeyl: you Pre is working again? Dec 06 20:57:29 no time Dec 06 20:57:32 still broken Dec 06 20:57:34 ok Dec 06 20:57:40 just trying to do something with the n900 Dec 06 20:57:43 ok Dec 06 20:57:46 but it's not exactly straightforward Dec 06 20:57:48 just hangs :) Dec 06 20:58:04 i guess we're not yet at "plug-n-play" stage Dec 06 20:58:10 will put you the nova uImage on the amthyst which you can boot with novaterm when you have time to restore everything :) Dec 06 20:58:10 mickeyl, do you need maemo on your n900? Dec 06 20:58:10 mickeyl: http://wiki.freesmartphone.org/index.php/Hardware/N900/Installation Dec 06 20:58:15 you took a look there? Dec 06 20:58:26 mickeyl: no Dec 06 20:58:52 we're nearly plug-and-play but only once it's installed Dec 06 20:58:53 mrmoku: yeah Dec 06 20:58:56 hmm Dec 06 20:59:02 tough no modem Dec 06 20:59:03 can the standard kernel boot from ext3? Dec 06 20:59:07 no charging Dec 06 20:59:12 but some stuff is plug and play Dec 06 20:59:18 like wifi Dec 06 20:59:22 if you extract the firmwares Dec 06 20:59:45 so some stuff is plug-and-play Dec 06 20:59:48 some is not Dec 06 21:00:57 mickeyl, not sure but maemo kenrel loads its modules so maybe Dec 06 21:01:11 hmm Dec 06 21:01:15 so what did you do to? Dec 06 21:01:29 I use a flashed kernel Dec 06 21:01:34 no maemo/meego Dec 06 21:01:35 only SHR Dec 06 21:01:53 you have ways to flash meego/maemo kenrel back tough Dec 06 21:02:06 sounds good Dec 06 21:02:08 how would i do that? Dec 06 21:02:30 http://www.shr-project.org/trac/wiki/N900Install#Uninstallation Dec 06 21:02:48 change the kernel according to the one you have it Dec 06 21:02:55 s/it// Dec 06 21:02:57 GNUtoo|laptop meant: change the kernel according to the one you have Dec 06 21:03:10 for installation it's more easy Dec 06 21:03:21 get flasher or the free version(0xFFFF) Dec 06 21:03:27 flash the kernel as kernel Dec 06 21:03:35 put the SHR sd inside Dec 06 21:03:41 close the phone Dec 06 21:03:48 (important else it doesn't find the sd) Dec 06 21:04:00 by close I mean don't let the back part open Dec 06 21:04:05 and boot Dec 06 21:04:23 sounds like the right procedure for someone with little time :) Dec 06 21:04:26 let me do that right now Dec 06 21:04:30 ok Dec 06 21:04:52 mickeyl, SHR microsd is already setup? Dec 06 21:04:56 yes Dec 06 21:05:02 ok nice Dec 06 21:05:02 setup and unpacked shr-full-900 Dec 06 21:05:13 mrmoku, do you have a zImage Dec 06 21:05:17 ? Dec 06 21:05:20 official zImage Dec 06 21:05:27 let me search 0xffff meanwhile Dec 06 21:05:38 mickeyl, look at the howto for desinstalling Dec 06 21:05:47 yep Dec 06 21:05:47 mickeyl: http://build.shr-project.org/shr-unstable/images/nokia900/zImage-2.6.28.10+gitr0+e93534addfc33a2fefbca13cb86a8f787e4b650c-r55-nokia900.bin Dec 06 21:05:49 hg clone http://hg.youterm.com/0xFFFF Dec 06 21:05:51 etc.... Dec 06 21:05:51 ok Dec 06 21:05:53 ok Dec 06 21:05:56 mrmoku: thanks, downloading Dec 06 21:06:16 so... Dec 06 21:06:28 download 0xFFFF from mercurial(hg) Dec 06 21:06:32 dowload the kernel Dec 06 21:06:37 compile 0xFFFF Dec 06 21:06:45 remove the usb cable Dec 06 21:06:51 poweroff your phone Dec 06 21:06:57 and ping me Dec 06 21:07:26 ping :) Dec 06 21:07:30 ok Dec 06 21:07:37 become root on your laptop Dec 06 21:08:07 cd 0xFFFF/src Dec 06 21:08:10 ./0xFFFF -h Dec 06 21:08:15 will give you the help Dec 06 21:08:24 so now do Dec 06 21:08:43 ./0xFFFF -p kernel%/path/to/your/kernel Dec 06 21:08:52 without spaces Dec 06 21:09:11 between kernel,%,and the path Dec 06 21:09:16 else it doesn't find the kernel Dec 06 21:09:24 when you've done that Dec 06 21:09:27 Waiting for device... | Dec 06 21:09:27 power the phone Dec 06 21:09:35 wait a sec Dec 06 21:09:42 when to plug in USB? Dec 06 21:09:42 connect the cable before Dec 06 21:09:45 ok Dec 06 21:09:48 before powering the phone Dec 06 21:09:48 cable plugged Dec 06 21:09:57 it will power automatically trough usb Dec 06 21:09:59 if it doesn't Dec 06 21:10:02 power it on Dec 06 21:10:12 it will flash the zImage Dec 06 21:10:13 [=] Bulkwriting the kernel piece... Dec 06 21:10:13 100% [#################################################################] Dec 06 21:10:13 Flash done succesfully. Dec 06 21:10:15 ok Dec 06 21:10:16 then do that Dec 06 21:10:27 ./0xFFFF -R Dec 06 21:10:35 and wait for the boot Dec 06 21:10:55 if the kernel is the right one Dec 06 21:10:59 it should boot Dec 06 21:11:07 and you should have touchscreen working etc... Dec 06 21:11:12 ah wait a sec Dec 06 21:11:13 where is it looking for the rootfs? p1? Dec 06 21:11:13 sorry Dec 06 21:11:19 I forgott something Dec 06 21:11:26 hmm, right, it hangs :) Dec 06 21:11:28 you will need to re-untar the rootfs Dec 06 21:11:38 you need to put it in rd mode Dec 06 21:11:41 it is Dec 06 21:11:43 else it'll reboot Dec 06 21:11:44 ok Dec 06 21:11:59 but hangs in a reboot loop Dec 06 21:12:02 normally it should look for Dec 06 21:12:08 /dev/mmcblk0p1 Dec 06 21:12:19 hmm right, this is where i have untarred it Dec 06 21:12:20 or mmcblk1p1 Dec 06 21:12:23 I don't remember Dec 06 21:12:36 mickeyl: rd mode is necessary Dec 06 21:12:47 yes Dec 06 21:12:49 it is Dec 06 21:12:56 mickeyl: disabled the watchdogs too? Dec 06 21:12:58 basically rd is necessary only on first boot but mickeyl has rd Dec 06 21:12:58 still no boot though Dec 06 21:13:03 do Dec 06 21:13:04 mrmoku: watchdogs? Dec 06 21:13:07 ./0xFFFF -i Dec 06 21:13:11 and pastebin the content Dec 06 21:13:28 I will try the kernel Dec 06 21:13:59 http://pastebin.ca/2012316 Dec 06 21:14:04 mickeyl: # flasher-3.5 --set-rd-flags=no-omap-wd Dec 06 21:14:08 # flasher-3.5 --set-rd-flags=no-ext-wd Dec 06 21:14:16 he can set them with 0xFFFF too Dec 06 21:14:35 yeah, but the wiki offered flasher for copy and paste :) Dec 06 21:15:13 ok I've the same rd flags than mickeyl Dec 06 21:15:13 ok... watchdogs are disabled Dec 06 21:15:17 I will try the kernel Dec 06 21:15:54 let me reformat the SD Dec 06 21:15:59 perhaps it doesn't like gparted Dec 06 21:15:59 ok Dec 06 21:16:13 mrmoku's kernel is fine Dec 06 21:16:53 root=/dev/mmcblk1p1 Dec 06 21:17:06 that's what I have Dec 06 21:17:18 mickeyl: backcover is firmly closed? Dec 06 21:17:20 so extract stuff to the microsd from your laptop Dec 06 21:17:33 ya, backcover was ok, repeating untar now Dec 06 21:17:37 ok Dec 06 21:17:40 ok Dec 06 21:17:43 should i put additional stuff to the SD before loading it again? Dec 06 21:18:02 maybe the battery charging script Dec 06 21:18:12 http://build.shr-project.org/tests/mrmoku/n900/charge.sh.txt Dec 06 21:18:58 GNUtoo|laptop: mmc init; fatload mmc 0:1 0x82000000 uImage-shr2; setenv atags 0x8200000c; bootm 0x82000000 Dec 06 21:19:06 that way the kernel will overwrite the atags, right? Dec 06 21:19:27 mrmoku, try it Dec 06 21:19:32 I did Dec 06 21:19:34 mrmoku, I can't be sure Dec 06 21:19:34 does not work Dec 06 21:19:35 grrr Dec 06 21:19:40 WARNING: GPT (GUID Partition Table) detected on '/dev/sdk'! The util fdisk doesn't support GPT. Use GNU Parted. Dec 06 21:19:42 wtf Dec 06 21:19:51 i DON't want gnu parted Dec 06 21:20:15 mickeyl, what distro/os? Dec 06 21:20:15 dd if=/dev/zero of=/dev/sdk :) Dec 06 21:20:33 mrmoku, do you have ext3.gz images? Dec 06 21:20:43 no Dec 06 21:20:47 ok Dec 06 21:21:06 hmm Dec 06 21:21:10 time's over now Dec 06 21:21:13 need to continue later Dec 06 21:21:15 thanks guys Dec 06 21:21:25 ok Dec 06 21:21:25 yw Dec 06 21:21:26 :( Dec 06 21:21:43 we lost againt time Dec 06 21:22:06 there are some people who are able to install openBSD in 5 min tough Dec 06 21:22:55 don't worry Dec 06 21:22:58 i'll come back in 2h Dec 06 21:23:01 ah ok Dec 06 21:24:31 not sure if I'll be there in 2h Dec 06 21:35:13 mrmoku, where do I find the toolchain? Dec 06 21:35:21 the openmoko old toolchain Dec 06 21:35:24 moment Dec 06 21:36:37 GNUtoo|laptop: http://downloads.openmoko.org/developer/toolchains/ Dec 06 21:36:55 ok thanks Dec 06 21:42:13 gn8 Dec 06 21:42:35 good night Dec 06 21:54:44 GNUtoo|laptop: I give up for today... need to get up early Dec 06 21:55:17 GNUtoo|laptop: good luck and good night Dec 06 21:55:25 thanks Dec 06 21:58:51 mrmoku, mmc init fails Dec 06 21:58:56 I'll try a smaller card Dec 06 21:58:59 mine is 16G Dec 06 22:03:33 mrmoku, it simply worked!!!! Dec 06 22:03:39 shr's booting Dec 06 22:04:08 I just needed a smaller microsd Dec 06 22:04:13 else mmcinit failed Dec 06 22:05:22 http://pastebin.com/qhPaQeV2 Dec 06 22:05:24 here's the diff Dec 06 22:05:30 compiler used: the openmoko compiler Dec 06 22:05:35 the oldest one Dec 06 22:07:52 uImage generated from: Dec 06 22:57:24 root@nokia900 ~ # Dec 06 22:57:40 *phew* Dec 06 23:00:01 mickeyl, from SHR? Dec 06 23:01:10 yes Dec 06 23:01:12 hmm Dec 06 23:01:19 iwconfig wlan0 is not a good idea, right? Dec 06 23:01:22 hangs Dec 06 23:01:28 *rebooting* Dec 06 23:02:00 mickeyl, you lacks the firmwares Dec 06 23:02:08 mickeyl, btw I jsut saw wifi has an issue Dec 06 23:02:12 you must edit a file Dec 06 23:02:15 anyway Dec 06 23:02:18 (11:52:30 PM) sre: I told you guys yesterday, that I would call it libisi.git Dec 06 23:02:24 for the libisi repo Dec 06 23:02:41 (11:52:42 PM) sre: but I don't really care that much for the name :P Dec 06 23:02:50 mickeyl, for wifi you need to edit : Dec 06 23:04:16 /etc/udev/rules.d/70-persistent-net.rules Dec 06 23:04:27 keep only the first line Dec 06 23:04:31 and change it to: Dec 06 23:04:40 SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1f:df:*", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" Dec 06 23:04:50 note that: Dec 06 23:04:51 ATTR{address}=="00:1f:df:*" Dec 06 23:05:07 or just add a * instead of the 3 last hex of the mac address Dec 06 23:05:21 maybe I was mislead by my modified image Dec 06 23:05:29 things are not that good Dec 06 23:07:31 anyway wifi *must* be fixed as soon as possible Dec 06 23:07:40 for the firmwares it's rather simple Dec 06 23:08:05 http://trac.shr-project.org/trac/wiki/Nokia%20N900/Firmware Dec 06 23:08:08 just do that Dec 06 23:08:13 mickeyl, ^^^ Dec 06 23:08:28 ok Dec 06 23:08:35 who makes the LED go on and why btw.? Dec 06 23:08:42 the usb cable Dec 06 23:08:57 if you want to make it go off Dec 06 23:09:03 run the charging script Dec 06 23:09:23 it will charge your device as a bonus :) Dec 06 23:09:41 ok Dec 06 23:09:57 basically it's the charge chip watchdog not beeing triggered that makes the led go on Dec 06 23:10:03 or something like that Dec 06 23:10:08 but in any case Dec 06 23:10:12 it's related to charge Dec 06 23:11:20 is anyone writing a kernel driver or do we need to put charge.sh into fsodeviced? Dec 06 23:11:34 no one is writing a kernel driver yet Dec 06 23:11:45 I started with one branch but it did only readings Dec 06 23:11:55 and I didn't test it Dec 06 23:12:07 at runtime Dec 06 23:12:11 (it compiled) Dec 06 23:12:22 I think the kernel also booted Dec 06 23:12:38 but modules mismatch prevented me to test it extensively Dec 06 23:12:42 ooh, one of the first devices that actually responds to bl_power Dec 06 23:12:43 amazing Dec 06 23:12:49 lol Dec 06 23:12:57 yes the kernel is pretty good Dec 06 23:13:06 ok Dec 06 23:13:06 if you forget about your wifi crash Dec 06 23:13:13 i need to leave soon, tell me one thing Dec 06 23:13:20 (can be prevented with having the firmwares) Dec 06 23:13:21 yes? Dec 06 23:13:32 btw I made uboot work this night Dec 06 23:13:40 what do you think would require my assistance on the n900? (other than gsm which is not so simple) Dec 06 23:13:42 and you eared about palm-pre wifi Dec 06 23:13:50 battery? Dec 06 23:14:00 we have a todo list here: Dec 06 23:14:12 http://wiki.freesmartphone.org/index.php/Hardware/N900/TODO#Urgent Dec 06 23:14:18 ah, right Dec 06 23:14:30 ok, that's a good page Dec 06 23:14:31 and maybe Dec 06 23:14:36 suspend revamp Dec 06 23:14:49 suspend revamp could be made only by you Dec 06 23:14:49 the n900 doesn't linux-suspend, right? Dec 06 23:14:53 it does Dec 06 23:14:57 oh it does? Dec 06 23:14:59 that's new Dec 06 23:15:00 I got it suspended Dec 06 23:15:04 previous n models didn't Dec 06 23:15:08 ah? Dec 06 23:15:19 if I leave it as-is it suspends Dec 06 23:15:27 or do something that is similar to suspend Dec 06 23:15:32 screen goes black Dec 06 23:15:35 sound is stopped Dec 06 23:15:36 etc.. Dec 06 23:16:00 and you must rmmod+modprobe g_ether to get connction again Dec 06 23:16:19 mickeyl, what's the state of g_dbus branch? Dec 06 23:16:34 waiting for a showstopper in vala Dec 06 23:16:39 ah ok Dec 06 23:16:43 I understad Dec 06 23:16:53 i have converted everything but fsousaged Dec 06 23:16:56 *I understand why you want to work on something Dec 06 23:17:00 yep Dec 06 23:17:11 pick suspend or battery charging Dec 06 23:17:12 can't continue with gdbus until this problem has been solved Dec 06 23:17:14 ok Dec 06 23:17:19 will have a go at battery first Dec 06 23:17:22 suspend is harder for us Dec 06 23:17:23 ok Dec 06 23:17:30 but battery would be so nice Dec 06 23:17:39 I can get readings in the kernel Dec 06 23:17:45 I've made a branch Dec 06 23:17:46 how long does the battery hold under SHR without suspend? Dec 06 23:17:48 (roughly) Dec 06 23:17:53 no idea Dec 06 23:17:56 long time Dec 06 23:18:20 maybe more than 5 hours Dec 06 23:18:21 not sure Dec 06 23:18:46 dos1 had some problems with idle notifier, right? Dec 06 23:18:50 i will take a look at that as well Dec 06 23:18:50 what's that? Dec 06 23:18:56 maybe battery is hard Dec 06 23:19:01 the script is not complete Dec 06 23:19:05 you need some more infos Dec 06 23:19:20 I have theses infos Dec 06 23:19:32 but I don't remember well Dec 06 23:19:46 but maybe it'll work out of the box Dec 06 23:19:59 the main problem is when you leave the chip without ticking the watchdog Dec 06 23:20:04 it goes in another state Dec 06 23:20:11 so pratically speaking Dec 06 23:20:13 well Dec 06 23:20:13 you do that: Dec 06 23:20:21 sh charge.sh.txt Dec 06 23:20:24 it doesn't charge Dec 06 23:20:26 ctrl+c Dec 06 23:20:29 sh charge.sh.txt Dec 06 23:20:29 we can make a keep-watchdog-happy, can't we? Dec 06 23:20:35 if you get 0x10 or 0x90 Dec 06 23:20:36 it charge Dec 06 23:20:40 k Dec 06 23:20:42 yes we can Dec 06 23:20:56 good Dec 06 23:20:58 0x10 = usb cable Dec 06 23:20:59 we do want to use it anyways Dec 06 23:21:02 0x90 = charger Dec 06 23:21:03 ok Dec 06 23:22:14 one last topic before i move, did anyone think about the feasibility of a PHONET forwarder? Dec 06 23:22:34 mickeyl, it's doable look at the headers Dec 06 23:22:37 it's very easy Dec 06 23:22:44 let me pastebin Dec 06 23:23:34 http://pastebin.com/bumaXtGj Dec 06 23:23:52 from src/gisi/netlink.h in libisi Dec 06 23:24:03 so maybe it does it out of the box Dec 06 23:24:03 ? Dec 06 23:24:35 hmm Dec 06 23:24:39 http://en.wikipedia.org/wiki/Nokia_PC_Suite Dec 06 23:25:11 interesting. I would rather work on the modem plugin on the PC, if possible Dec 06 23:25:19 ok Dec 06 23:25:19 it makes development so much faster Dec 06 23:25:27 so we should investigate that sooner or later Dec 06 23:25:32 ok Dec 06 23:25:51 what should I do for battery Dec 06 23:25:58 should I checkin my changes into master? Dec 06 23:26:18 if it doesn't collide with the charger script, yes Dec 06 23:26:25 it collides Dec 06 23:26:34 but the charger script can be easily modified Dec 06 23:26:42 just read the values from the node Dec 06 23:26:43 then check it in, but keep default config disabled or so Dec 06 23:26:48 ok Dec 06 23:26:50 Inquiring ... Dec 06 23:26:50 E8:06:88:90:96:64 clock offset: 0x1be3 class: 0x0a041c Dec 06 23:26:51 that's good Dec 06 23:26:53 it's disabled by defualt Dec 06 23:27:03 Scanning ... Dec 06 23:27:03 E8:06:88:90:96:64 iPad 3G Mickey Dec 06 23:27:05 excellent Dec 06 23:27:05 mickeyl, I got my bluetooth keyboard working Dec 06 23:27:07 BT looks good Dec 06 23:27:10 heh, cool Dec 06 23:27:18 just need my script before launching emtooth Dec 06 23:27:32 don't forget bluetooth coexistance Dec 06 23:27:39 basically the htcdream was a nightmare Dec 06 23:27:45 and the nokia900 is a dream Dec 06 23:27:51 hehe Dec 06 23:27:53 apart charging and modem Dec 06 23:27:55 right Dec 06 23:28:00 i still miss the ts Dec 06 23:28:05 but can't have everything... Dec 06 23:28:08 indeed Dec 06 23:28:20 the nokia900 is good enough Dec 06 23:28:34 and resistive touchscreen can be an advantage Dec 06 23:28:41 for non-obtimized software Dec 06 23:28:45 you have more precision Dec 06 23:28:49 example: claws mails Dec 06 23:29:16 btw could you delete a branch? Dec 06 23:30:03 which one where? Dec 06 23:30:05 linux-n900 is a wrong name and has been merged Dec 06 23:30:12 linux-2.6 in fso Dec 06 23:31:09 compare with nokia900/master Dec 06 23:33:24 btw wl1251_sdio does ad-hoc but there is too much packets loss Dec 06 23:33:38 Deleted branch linux-n900. Dec 06 23:33:43 thanks Dec 06 23:33:50 np Dec 06 23:34:38 mickeyl, what's the deadline for including the battery patches? Dec 06 23:34:50 because I will go in france soon Dec 06 23:34:57 and then come back Dec 06 23:36:21 mickeyl, could you also create the libisi git repo while you're at it? Dec 06 23:38:39 mickeyl, btw shadowjk's website(usefull for battery) http://enivax.net/jk/n900/ Dec 06 23:41:25 ok, libisi is there Dec 06 23:41:47 thanks Dec 06 23:42:13 mickeyl, btw doc should know about battery too Dec 06 23:42:19 and maybe PaulFertser too Dec 06 23:42:33 ok Dec 06 23:42:34 and shadowjk in #meego-arm Dec 06 23:42:51 shadowjk did the lastest scripts Dec 06 23:43:11 what do you think of n900 btw Dec 06 23:43:28 in terms of... hardware? Dec 06 23:43:41 personally good screen+good kernel Dec 06 23:44:24 yes, the kernel is promising. Dec 06 23:44:35 screen is nice, i don't like the keyboard Dec 06 23:44:35 and there will be an upstream kernel Dec 06 23:44:43 lol neither do I Dec 06 23:44:48 but it has ctrl Dec 06 23:44:49 g1 was better Dec 06 23:44:51 and arrows Dec 06 23:44:52 yes indeed Dec 06 23:44:54 and raphael was _much_ better Dec 06 23:45:12 anyways, doesn't help if stuff doesn't work Dec 06 23:45:12 you bet I know about battery :-D Dec 06 23:45:20 but it's worth, bad keyboard against good kernel and big screen Dec 06 23:45:21 :) Dec 06 23:45:30 ok, thanks for guiding me that far Dec 06 23:45:37 i will experiment over the next days Dec 06 23:45:37 np Dec 06 23:45:40 as time permits ;) Dec 06 23:45:44 now to move to bed Dec 06 23:45:49 g'night Dec 06 23:45:50 with n900 and wifi? Dec 06 23:46:04 I bet for sleeping Dec 06 23:46:05 bye Dec 06 23:46:07 hehe Dec 06 23:46:07 good night Dec 06 23:46:07 yes **** ENDING LOGGING AT Tue Dec 07 02:59:58 2010