**** BEGIN LOGGING AT Tue Mar 22 02:59:57 2011 Mar 22 06:38:03 moin Mar 22 06:38:30 moin Mar 22 09:13:36 heyho Mar 22 09:15:01 hey Mar 22 09:33:27 morphis: low latency pong :-) Mar 22 09:33:35 err... high Mar 22 09:33:37 mrmoku: :) Mar 22 09:34:08 you really need to improve your latency :D Mar 22 09:34:15 hehe, yeah Mar 22 09:34:30 * mrmoku was busy doing other stuff :/ Mar 22 09:34:52 no problem Mar 22 09:35:07 I wanted only ask how far you are with the fsoaudio integratio Mar 22 09:35:08 n Mar 22 09:35:37 gmorning :) Mar 22 09:35:38 I somewhere interrupted in the middle... have to pick it up again Mar 22 09:35:52 morphis: I hope I will be able to look at it later today Mar 22 09:35:57 ok Mar 22 09:36:02 pespin: heyho Mar 22 09:37:40 mrmoku: if you need more improvements in fsoaudiod tell me Mar 22 09:37:51 morphis: yeah, will do Mar 22 09:38:16 morphis: how's the alsa side doing? Mar 22 09:38:25 should it work on gta02 already? Mar 22 09:39:37 it's implemented but still untested Mar 22 09:39:50 I reflashed my gta02 yeterday with a recent image to test it Mar 22 09:39:57 good, so it would make sense to test it when I'm done Mar 22 09:41:17 SHR: 03Martin.Jansa 07shr-chroot * r7bcaf756012f 10/ (2001 files in 231 dirs): system upgrade Mar 22 09:41:18 morphis: one thing TAsn did in libphone-ui which fsoaudiod probably should do is to listen to alsa mixer change events Mar 22 09:41:33 so that if one fiddles with alsamixer fsoaudiod does not get out of sync Mar 22 09:41:44 yeah that is a nice feature Mar 22 09:42:23 dunno if there is some alsa vapi for that but the c-code looked quite straight forward Mar 22 09:42:40 yeah a vapi for alsa is there Mar 22 09:42:48 will add this feature during the next days Mar 22 09:42:53 great Mar 22 10:07:04 SHR: 03Martin.Jansa 07shr-makefile * r67a377654756 10/conf/shr-core/bblayers.conf: shr-core: update bblayers Mar 22 10:10:14 SHR: 03Martin.Jansa 07shr-makefile * r0c8b788e24db 10/setup-env: setup-env: add openembedded-core/scripts to PATH if exists and few more variables to EXTRAWHITE Mar 22 10:22:04 mickey|office: ping Mar 22 10:22:10 mickey|office: do you know this one here: 2011-03-22T10:16:01.111341Z [CRITICAL] fsogsmd : GLib : g_simple_async_result_get_op_res_gpointer: assertion `G_IS_SIMPLE_ASYNC_RESULT (simple)' failed Mar 22 10:29:38 never seen that. could be either a bug in vala or a problem with yield. which code does emit that? Mar 22 10:31:18 bbiab, have to restart due to a kernel upgrade Mar 22 10:44:13 mickey|office: look at http://git.freesmartphone.org/?p=cornucopia.git;a=blob;f=fsogsmd/src/plugins/modem_qualcomm_palm/phonebookhandler.vala;h=7847462d0374806ac63285bde876400b196d40de;hb=HEAD Mar 22 10:44:19 and initializeStorage Mar 22 10:44:32 its the yield channel.sim_service.read(...) which fails Mar 22 10:44:42 with mdbus2 I can call the method without problems Mar 22 10:44:50 so the problem is somewhere in fsogsmd Mar 22 10:46:25 vala is 0.11.7 Mar 22 10:46:30 maybe I should try 0.11.6 Mar 22 10:48:07 yeah, regression is always possible. might want to diff the generated code Mar 22 10:48:40 jepp Mar 22 10:52:51 thats something I hate vala for ... Mar 22 10:53:11 it's not very stable in some directions Mar 22 10:53:44 true Mar 22 10:53:54 if we could we would have stayed on 0.10.x Mar 22 10:54:07 but alas we do need the features in the development branch Mar 22 10:54:21 sadly, yes Mar 22 10:54:32 maybe we should use the next stable branch as base Mar 22 10:54:48 or open our own branch .. and backport some changes Mar 22 10:55:57 but thats quite some work .. Mar 22 11:06:45 apart from async delegates, i don't think we need more forthcoming syntax additions, so we can perhaps stay on 0.12 for a while when it's ready Mar 22 11:06:54 speaking about that... playya_ ? ;) Mar 22 11:12:15 hehe :) Mar 22 11:12:20 0.12 would be ok Mar 22 11:12:42 btw. do we really need async delegates? or is it only nice-to-have? Mar 22 11:14:41 mickey|office: btw. do already took a look at fsoaudiod? Mar 22 11:14:44 well, need may be a bit exaggarated, but it sucks having to add a closure to forward Mar 22 11:14:48 no time yet, sorry Mar 22 11:16:05 async delegates: ok Mar 22 11:16:21 I hope you like it :) Mar 22 11:16:36 it will become some more features in the future Mar 22 11:16:43 like the audio session handling Mar 22 11:16:50 DocScrutinizer alsa approach is very nice Mar 22 11:17:17 ok, good to see someone picking this up. i always found it interesting, but it didn't affect me enough to go ahead and do it Mar 22 11:17:24 thanks Mar 22 11:17:49 :) Mar 22 11:18:15 mickey|office: the new asound.conf in fsoaudiod already supports different audio devices we can control Mar 22 11:19:08 * DocScrutinizer is dancing and singing "goodbye PA!" Mar 22 11:19:42 hehe :) Mar 22 11:19:54 soundserver, honestly what's the concept behind that? Mar 22 11:19:58 DocScrutinizer: we never had PA on SHR :) Mar 22 11:20:04 I know Mar 22 11:20:09 DocScrutinizer: behind what? Mar 22 11:20:25 soundserver (like PA, ARTS, etc) Mar 22 11:20:29 ah ok Mar 22 11:20:43 as the people who did it :) Mar 22 11:20:54 :-P Mar 22 11:21:40 morphis: so voice calls are 100% working on the pre now? (also with audio routing) Mar 22 11:21:51 mickey|office: yes Mar 22 11:21:57 excellent Mar 22 11:22:02 mickey|office: but not with current head Mar 22 11:22:04 what about data? Mar 22 11:22:27 as with current fso/msmcomm head I ran into the error menitoned above Mar 22 11:22:37 mickey|office: should even work Mar 22 11:22:46 amazing. Mar 22 11:23:11 mickey|office: but it needs some coordination between the main and the atchannel Mar 22 11:23:23 I am currently on the way doubling the default at channel Mar 22 11:23:30 and make it suitable for msmcomm Mar 22 11:24:37 WiFi is even working by default now Mar 22 11:24:46 it only need a ifup in the powercontrol plugin Mar 22 11:26:39 hmpf Mar 22 11:26:45 with 0.11.6 it works ... Mar 22 11:26:47 damn it Mar 22 11:28:56 mickey|office: if you have some time: http://amethyst.openembedded.net/~morphis/yield_error/ Mar 22 11:30:56 it seems like 0.11.7 added the calls to the various _finish methods Mar 22 12:39:24 hello just back and much to catch up on. Installed the latest and greatest to my OM and no longer likes my pim.db file for some reason. Is there a simply reason for this and work around? Mar 22 12:40:15 arigead: what's the latest and greatest? Mar 22 12:42:29 according to settings SHR:20110314, Branch: Master, Revision: b1fbaf6 Mar 22 12:43:00 arigead: ah, SHR Mar 22 12:43:06 arigead: no idea then sorry :/ Mar 22 12:43:37 no worries I should have said that at the start. Mar 22 12:44:12 arigead: http://paste.pocoo.org/show/357697/ Mar 22 12:45:05 arigead: if your pim.db is >1year old (2010.03) Mar 22 12:46:53 JaMa: Not sure it's that old but I'll try that out. Thanks a million I have to go to a meeting but I'll try that when I get back. Mar 22 13:23:16 hmm from looking on remoko svn it should support bluez4 now, did anyone try it? Mar 22 13:28:13 social: iirc remoko in OE is older version Mar 22 13:29:09 social: I was thinking about upgrading it about year ago.. but then lost interest http://paste.pocoo.org/show/357717/ Mar 22 13:38:07 mickey|office: http://git.gnome.org/browse/vala/commit/?id=eb54f1e1795d653c4d98dd60779085bf7811ec7f Mar 22 13:38:22 mickey|office: this is the one causing the asseration failure ... Mar 22 13:38:41 will report it as bug Mar 22 13:40:36 but I will patch it in OE as long as vala takes out a new release Mar 22 13:52:45 morphis: ok, good find. one of Luca's patches Mar 22 13:53:00 jepp Mar 22 13:55:55 hmpf Mar 22 13:55:57 | /oe/palmpre/tmp/sysroots/x86_64-linux/usr/bin/valac -C --pkg glib-2.0 --pkg gio-2.0 --header msmcomm-specs.h --library msmcomm-specs-2.0 --gir msmcomm-specs-2.0.gir --basedir . management.vala error.vala misc.vala state.vala sim.vala phonebook.vala call.vala network.vala sound.vala voicemail.vala sms.vala Mar 22 13:55:57 | make[2]: *** [libmsmcomm_specs_la.vala.stamp] Segmentation fault (core dumped) Mar 22 14:05:00 freesmartphone.org: 03morphis 07msmcomm * r67cfd9f1589b 10/libmsmcomm/ (6 files in 4 dirs): libmsmcomm: implement sms message to establish routing Mar 22 14:05:03 freesmartphone.org: 03morphis 07msmcomm * ra4b35bfb484f 10/ (msmcomm-specs/src/sim.vala msmcommd/src/simservice.vala): msmcomm-specs: rename read method of sim service to read_field Mar 22 14:05:04 freesmartphone.org: 03morphis 07msmcomm * r92348bfdacc0 10/libmsmcomm/ (6 files in 4 dirs): libmsmcomm: implement sms message to retrieve all messages from the sim card Mar 22 14:05:05 freesmartphone.org: 03morphis 07msmcomm * r9c0139bf66f2 10/msmcommd/src/smsservice.vala: msmcommd: add dummy methods for new smsservice methods Mar 22 14:05:07 freesmartphone.org: 03morphis 07msmcomm * rfdcb434dd7ff 10/msmcomm-specs/src/sms.vala: msmcomm-specs: add some sms service methods Mar 22 14:11:49 morphis: if it helps you, i can back out that change and release a 0.11.7.2 Mar 22 14:12:00 jepp Mar 22 14:15:41 feel free to fix it in OE in the meantime though, i don't know when i can do it Mar 22 14:19:06 ok Mar 22 14:21:14 morphis, hi Mar 22 14:21:19 GNUtoo|bug20: heyho Mar 22 14:21:41 so why the proprietary novacomm is needed to get started with the pre? Mar 22 14:21:41 freesmartphone.org: 03morphis 07cornucopia * rb9f76100417c 10/fsoaudiod/TODO: fsoaudiod: update TODO Mar 22 14:21:44 or pre2 Mar 22 14:21:59 as you need to talk to the bootloader Mar 22 14:22:01 what's absent in precomm Mar 22 14:22:03 ok Mar 22 14:22:13 and precomm cannot talk to the bootloader Mar 22 14:22:18 no way to talk to the bootloader with free tools? Mar 22 14:22:21 it uses a slightly different mode Mar 22 14:22:24 currently not Mar 22 14:22:25 even something else? Mar 22 14:22:27 ok Mar 22 14:22:29 you can engineer it Mar 22 14:22:42 I don't know the details about the novacomm protocol Mar 22 14:22:46 so what's the workaround? kexecboot? Mar 22 14:22:48 but you can work around this Mar 22 14:22:50 :) Mar 22 14:22:59 ok Mar 22 14:23:08 what's the workarround? Mar 22 14:23:14 you can do everything manually in webOS Mar 22 14:23:19 ah ok Mar 22 14:23:21 but that will not work with the fso-installer Mar 22 14:23:25 so no free tool at all Mar 22 14:23:30 yes Mar 22 14:23:33 even on the device etc... Mar 22 14:24:01 so pre2 -> captainigloo Mar 22 14:24:20 as you still insist on a free tool to access the device? Mar 22 14:24:55 maybe you can talk to the webos-internals people about the current situation Mar 22 14:25:00 maybe the know more than me Mar 22 14:25:03 basically I need a free tool because I can't rely on a livecd install on hollidays etc.... Mar 22 14:25:07 ok Mar 22 14:25:12 ok Mar 22 14:25:23 I'll ask them Mar 22 14:25:29 I know there was one who reverse engineer the protocol basics Mar 22 14:25:36 and implemented precomm Mar 22 14:26:36 ok Mar 22 14:42:59 hi JaMa Mar 22 14:43:09 is there some shr-core stuff? Mar 22 14:52:02 freesmartphone.org: 03morphis 07cornucopia * r3263f791f68f 10/fsogsmd/src/plugins/modem_qualcomm_palm/ (mediators_sim.vala phonebookhandler.vala): fsogsmd: modem_qualcomm_palm: adjust for recent changes to msmcomm-specs Mar 22 14:52:17 shr-core is on git.shr-project.org Mar 22 14:54:02 ok but is there more infos on it? Mar 22 14:54:29 GNUtoo|bug20: don't think so Mar 22 14:54:40 I seems like it's currently JaMa-only-playground Mar 22 14:54:49 but you can use it with shr-makefile Mar 22 14:54:50 ok Mar 22 14:54:57 so I wait before switching? Mar 22 14:56:44 I think so Mar 22 14:57:00 I think we have to use both in parallel for a short time Mar 22 14:57:19 as switching to oe-core and shr-core will introduce a number of bugs Mar 22 15:37:19 duhh... if I only knew how to disable account registration in our trac :/ Mar 22 15:38:41 this spam is driving me mad... Mar 22 15:45:43 we really need to be the trac admin ... Mar 22 15:52:17 morphis: well, _trac_ admin we are Mar 22 15:52:26 but not admin of the server the trac is running on Mar 22 15:53:30 jepp I meant that Mar 22 15:54:05 there is even a captcha needed to register... Mar 22 15:54:49 but email is not mandatory Mar 22 15:55:50 same here Mar 22 15:55:57 i have shutdown the webservice for a couple of hours :/ Mar 22 15:56:41 :/ Mar 22 16:07:53 GNUtoo|bug20: it's not really usable yet Mar 22 16:07:58 ok Mar 22 16:08:01 thanks a lot Mar 22 16:08:14 then I'll wait and continue to compile images with oe.dev Mar 22 16:08:31 but otherwise brave people are welcome to join :) Mar 22 16:08:41 just it needs lots of cleanup and changes Mar 22 16:09:24 but before pushing those to meta-oe I need something to play with and when it's ready to build usable images, I'll start to move things from meta-shr to meta-oe where possible Mar 22 16:21:35 hi JaMa eve fails like this: Mar 22 16:23:17 http://www.pastie.org/1700236 Mar 22 16:25:39 GNUtoo|bug20: apply this http://patchwork.dev.bearstech.com/patch/856/ Mar 22 16:26:13 ok thanks a lot Mar 22 17:24:07 mrmoku, did you had the time to test? Mar 22 17:24:26 I made libnl2 only images and I'm testing right now Mar 22 17:25:34 http://www.pastie.org/1700448 Mar 22 17:25:56 but *are you sure * that we should remove libnl1 Mar 22 17:26:13 isn't it rather that it: Mar 22 17:26:19 *works with libnl1 Mar 22 17:26:30 *fails strrangely with libnl2(our cases) Mar 22 17:26:36 *fails to start with both Mar 22 17:36:03 ok, maybe I should abandon before beeing too much angry against the machine Mar 22 17:36:50 ok init0 done Mar 22 17:39:49 GNUtoo|bug20: tested what? libnl2 only minimal image? Mar 22 17:40:03 no Mar 22 17:40:09 opkg updatee Mar 22 17:40:17 ldd /usr/sbin/fsogsmd Mar 22 17:40:22 libln2 linked only Mar 22 17:40:39 no Mar 22 17:40:40 the feeds were rebuilt from scratch Mar 22 17:40:54 didn't work Mar 22 17:41:01 mickey|bbl's feed? Mar 22 17:41:03 and only provoked angryness in me Mar 22 17:41:04 no Mar 22 17:41:05 mine Mar 22 17:41:16 ahh Mar 22 17:41:36 firefox 4 is out Mar 22 17:41:38 go and get it! Mar 22 17:42:55 mrmoku, what was the difference between the 2 images? Mar 22 17:43:03 TAsn: pacman -Syu? Mar 22 17:43:10 TAsn: I have it already for some months now :) Mar 22 17:43:38 morphis, only rcs and betas, me too. Mar 22 17:43:50 mrmoku, usually takes a couple of days until it reaches the stable repos Mar 22 17:43:52 GNUtoo|bug20: can tell you in some min when back to my kbd Mar 22 17:44:10 OK Mar 22 17:45:01 mrmoku, btw, how's your arch experience doing? Mar 22 17:45:06 having fun? :P Mar 22 17:45:16 TAsn, I tried it yesterday, but I didn't like to have the tabs up there... too far from web content u.u Mar 22 17:45:28 you can change that... Mar 22 17:45:43 and I like it btw Mar 22 17:47:08 firefox 4 is great Mar 22 17:47:16 I even like it to have one button for the big menu Mar 22 17:47:37 TAsn: enjoying it a lot Mar 22 17:47:52 morphis, I like it cause I don't use the menu Mar 22 17:47:59 but I really need fast access to the bookmarks Mar 22 17:48:09 which is annoying with the one button. Mar 22 17:48:11 even started to deploy it on our clients servers ;) Mar 22 17:48:41 :) Mar 22 17:49:09 mrmoku, :)) Mar 22 17:49:21 mrmoku, one problem currently exists in arch (will be fixed very soon) Mar 22 17:49:30 that's why it's probably not best to use it for commercial use Mar 22 17:49:40 which is? Mar 22 17:49:43 no package signing atm :| Mar 22 17:49:52 ahh, yeah Mar 22 17:50:08 that's a bit of a turn-off Mar 22 17:50:13 but they are working on it. Mar 22 17:50:14 :) Mar 22 17:50:27 mrmoku, omg, nvm. Mar 22 17:50:29 it hit the repos Mar 22 17:50:36 ZOMG! ff4@! :P Mar 22 17:50:37 yeah, amazing folks Mar 22 17:50:51 hehe Mar 22 17:54:30 yeah. Mar 22 17:55:28 morphis: Mar 22 17:55:40 novacom -w run file://bin/mount -- /dev/mapper/store-fso /tmp/fso -o rw Mar 22 17:55:42 mount: mounting /dev/mapper/store-fso on /tmp/fso failed: Device or resource busy Mar 22 17:55:44 make: *** [mount-fso] Fehler 255 Mar 22 17:55:46 make flash-image failed Mar 22 17:56:03 make flash-kernel did work this time Mar 22 18:01:21 hmpf Mar 22 18:01:37 go with novaterm on the device and unmount /tmp/fso Mar 22 18:01:57 it seems to be a bug Mar 22 18:06:04 it's not mounted Mar 22 18:07:01 might anything have gone wrong during the lvm-resize? that one i carried out last weekend while under webos Mar 22 18:07:21 can i just lvm-resize again or will that mess things up? Mar 22 18:34:26 mickey|: it will mess things Mar 22 18:34:40 log on the device and check /dev/mapper/store-fso Mar 22 18:35:27 you specified the correct TARGET? Mar 22 18:35:30 TARGET=pre? Mar 22 18:36:11 yep Mar 22 18:36:30 i think there needs to be a sleep in between rescanning the lvm and mounting one of the partitions Mar 22 18:36:50 mounting store-fso on the device seems to work when idle Mar 22 18:37:08 that would explain the "Device or resource busy" Mar 22 18:37:15 ok, fell free to add a sleep to the Makefile Mar 22 18:37:19 i'm issuing the commands for flashing the image manually now Mar 22 18:37:37 ok Mar 22 18:37:51 and don't forget to install bootr afterwards Mar 22 18:38:56 ok, rebooting Mar 22 18:38:58 crossing fingers Mar 22 18:39:07 I have to reboot too Mar 22 18:39:09 one moment Mar 22 18:40:42 hmm Mar 22 18:40:47 ok, that didn't work Mar 22 18:40:58 got a big exclamation mark with a "www.palm.com/ROM" Mar 22 18:45:13 so Mar 22 18:45:15 mickey|: is it working? Mar 22 18:45:21 ok, that didn't work Mar 22 18:45:21 got a big exclamation mark with a "www.palm.com/ROM" Mar 22 18:45:40 when trying to boot SHR Mar 22 18:45:46 ok Mar 22 18:45:50 then do the following Mar 22 18:45:55 power off the device Mar 22 18:46:02 hold volume up Mar 22 18:46:07 plug usb cable in Mar 22 18:46:12 [: 3: /local/pkg/fso/utilities/palmpre/fso-installer/downloads/u-boot-palmpre.bin: unexpected operator Mar 22 18:46:12 is normal? Mar 22 18:46:14 wait until the usb logo arrives Mar 22 18:46:22 ? Mar 22 18:46:23 no Mar 22 18:47:11 ok, i'm in rescue mode again and did memload Mar 22 18:47:43 hmm, it almost looks as something is forking in that makefile Mar 22 18:47:51 e.g. a second process started Mar 22 18:48:46 what? Mar 22 18:48:54 ok then look at /boot Mar 22 18:49:03 there should be the symlink /boot/uImage Mar 22 18:49:04 meeting now, have to go :/ Mar 22 18:49:09 damn it Mar 22 18:49:39 I really need to go to ffm and fix your device Mar 22 18:49:50 and needs too much time Mar 22 18:52:46 bbin 45 minu Mar 22 18:54:22 ok Mar 22 19:28:14 mickey|: can we do some ssh thing so I can help you? Mar 22 19:28:20 or maybe via skype? Mar 22 19:28:26 screen sharing? Mar 22 19:32:03 back Mar 22 19:33:37 http://pastie.org/1700969 is the full output Mar 22 19:33:49 although i ctrl-C there is some process in the background which I'm wondering about Mar 22 19:34:06 oooh, wait Mar 22 19:34:09 ideea Mar 22 19:34:40 hmm, no Mar 22 19:34:46 i thought it could be something wrt. make -j Mar 22 19:36:41 hm ok Mar 22 19:37:14 "Warte auf noch nicht beendete Prozesse..." -> das ist aber sehr komisch Mar 22 19:37:18 uups Mar 22 19:37:18 yep Mar 22 19:37:41 mickey|: btw. Slyon got a Pre 2 from Palm too Mar 22 19:37:45 nice Mar 22 19:37:54 jepp Mar 22 19:38:10 yeah :) Mar 22 19:38:34 mickey|: hm, du hast auch bestimmt kein makro ala make() { make -j n $1 } Mar 22 19:39:00 mickey|: anyway Mar 22 19:39:13 log into your device Mar 22 19:39:15 with novaterm Mar 22 19:39:33 mkdir /tmp/fso && mount /dev/mapper/store-fso /tmp/fso Mar 22 19:39:39 cd /tmp/fso && rm -rf * Mar 22 19:39:42 exit Mar 22 19:39:54 done Mar 22 19:40:03 novaterm put file:///tmp/fso/full-palmpre.tar.gz < full-palmpre.tar.gz Mar 22 19:40:07 wait a moment Mar 22 19:40:11 until its done Mar 22 19:40:15 then novaterm on your device Mar 22 19:40:27 cd /tmp/fso && tar xzf full-palmpre.tar.gz -C . Mar 22 19:40:36 check /boot for folder called bootr Mar 22 19:41:04 run /boot/bootr/bin/install.sh Mar 22 19:41:11 check /boot/uImage symlink Mar 22 19:41:28 should point to /boot/uImage-2.6.24-palm-joplin-3430 Mar 22 19:42:47 ls -alh /boot/sbin Mar 22 19:42:58 should look like this Mar 22 19:42:59 root@palm-webos-device:/boot# ls -alh sbin Mar 22 19:43:00 drwxr-xr-x 2 root root 4.0k Dec 31 16:00 . Mar 22 19:43:00 drwxr-xr-x 14 root root 4.0k Dec 31 16:00 .. Mar 22 19:43:00 lrwxrwxrwx 1 root root 16 Dec 31 16:00 init -> /sbin/init.bootr Mar 22 19:43:00 -rwxr-xr-x 1 root root 1.6k Feb 14 2011 init.backup.bootr Mar 22 19:43:03 -rwxr-xr-x 1 root root 1.6k Dec 31 16:02 init.bootr Mar 22 19:43:04 -rwxr-xr-x 1 root root 1.6k Dec 31 16:02 init.fso.bootr Mar 22 19:43:08 -rwxr-xr-x 1 root root 1.6k Dec 31 16:02 init.webos.bootr Mar 22 19:43:10 lrwxrwxrwx 1 root root 14 Feb 14 2011 pivot_root -> ../bin/busybox Mar 22 19:44:50 morphis: whats up? Mar 22 19:44:56 wtf? Mar 22 19:45:37 its not my day ... Mar 22 19:45:43 heh Mar 22 19:45:45 /bin/sed: can't read /usr/lib/libgio-2.0.la: No such file or directory Mar 22 19:45:47 :( Mar 22 19:46:27 lrwxrwxrwx 1 root root 18 Jun 14 10:03 uImage -> uImage-palmpre.bin Mar 22 19:46:28 -rw-r--r-- 1 root root 2345880 Jun 14 2010 uImage-2.6.24-palm-joplin-3430 Mar 22 19:46:28 -rwxr-xr-x 1 root root 187348 Jun 14 10:09 uImage-palmpre.bin Mar 22 19:46:31 that's not quite right, right? Mar 22 19:47:00 jepp Mar 22 19:47:11 uImage should point for the first start to uImage-2.6.24-palm-joplin-3430 Mar 22 19:47:18 ok, i remove the short uimage Mar 22 19:47:53 ln -s /boot/uImage-2.6.24-palm-joplin-3430 uImage Mar 22 19:48:29 done Mar 22 19:48:39 you verified bootr? Mar 22 19:48:42 looks ok Mar 22 19:48:44 maybe Slyon can help you too Mar 22 19:48:52 as I have to leave for some minutes Mar 22 19:48:52 ok Mar 22 19:49:08 morphis, mickey|: i'm here to help if needed Mar 22 19:49:15 thanks, let me check what happens on reboot now Mar 22 19:49:15 Slyon: great Mar 22 19:49:32 hmm Mar 22 19:49:33 bummer Mar 22 19:49:37 www.palm.com/ROM Mar 22 19:49:40 exclamation mark Mar 22 19:49:46 never used fso-installer, though Mar 22 19:49:47 it doesn't even go into bootr now Mar 22 19:52:40 mickey|, i think i know what the problem is... Mar 22 19:53:31 mickey|, you set the link /boot/uImage... but while booting the pre it's in a special enviroment... Mar 22 19:53:51 you need to cd /boot/sbin; ln -s uImage-2.6.24-palm-joplin-3430 uImage Mar 22 19:54:05 as the kernels are in / in this boot-enviroment Mar 22 19:54:33 eg. /boot/sbin is this enviroments root Mar 22 19:54:42 ah Mar 22 19:54:49 there is no kernel at all in my /boot/sbin/ Mar 22 19:54:59 only the init* stuff Mar 22 19:55:24 i copy it over Mar 22 19:55:27 rebooting Mar 22 19:55:35 mickey|, ah sorry Mar 22 19:55:36 wait Mar 22 19:55:53 mickey|, /boot is / Mar 22 19:56:06 i oversaw the "cd .." Mar 22 19:56:17 https://github.com/slyon/bootr/blob/master/pre/bootr.sh Mar 22 19:57:35 so it is: cd /boot; ln -s uImage-2.6.24-palm-joplin-3430 uImage Mar 22 19:59:47 with boot being /dev/mmcblk0p2? Mar 22 20:00:02 being _on_ Mar 22 20:00:43 yes Mar 22 20:00:46 hmm, still the exclamation mark Mar 22 20:00:53 i guess i messed it completely up again Mar 22 20:00:55 *sigh* Mar 22 20:01:14 doesn't make any sense to continue in that state, i need to webdoctor again Mar 22 20:02:04 well, this would probably be the best, to get to a sane state Mar 22 20:15:54 mickey|: maybe I should assist you when doing the setup Mar 22 20:16:13 more in detail as I already mentioned Mar 22 20:17:59 ya, i'm afraid there are some bugs in fso-installer or i'm just stupid Mar 22 20:18:05 webdoctor in progress... Mar 22 20:18:50 so shall i play by the book [wiki page], giving you the full output every time again? Mar 22 20:20:21 jepp Mar 22 20:20:27 ok Mar 22 20:20:27 btw. Mar 22 20:20:29 and I will do it here in parallel Mar 22 20:20:34 why is setting into developer mode important? Mar 22 20:20:41 since we don't run webos anyways? Mar 22 20:20:52 or is it a prerequisit to make memload? Mar 22 20:21:52 memload you ran when you are in bootie Mar 22 20:21:57 and memboot when you are in webOS Mar 22 20:22:08 GNUtoo|bug20: it sounds very promising what coutlla says about leo alsa Mar 22 20:22:08 memboot will do a tellbootie recover before running memload Mar 22 20:22:26 dcordes, what did he say? Mar 22 20:23:19 ok, but... is that only working with developer mode enabled? Mar 22 20:26:18 mickey|: for sure Mar 22 20:26:42 ok... trying to get past the initial login now Mar 22 20:27:02 mickey|bbl: maybe you should use the meta-doctor to pass activation etc. Mar 22 20:27:19 heh Mar 22 20:27:20 meta-doctor Mar 22 20:27:21 what's that? Mar 22 20:28:12 http://git.webos-internals.org/?p=tools/meta-doctor.git;a=summary Mar 22 20:28:40 hmm, this is already taking ages. it's installing the profile now Mar 22 20:28:50 *tap* *tap* *tap* Mar 22 20:32:04 ok, developer mode enabled, rebooting... Mar 22 20:34:24 ok, booted. shall we start? Mar 22 20:34:30 * mickey| make memload Mar 22 20:35:35 GNUtoo|bug20: that he had some learning interfering with progress and that he has no doubts it will work Mar 22 20:35:43 ok Mar 22 20:35:59 nice Mar 22 20:36:04 morphis: didn't work Mar 22 20:36:25 this time i did it from within webos Mar 22 20:36:30 mickey|: http://pastie.org/1701278 Mar 22 20:36:48 I did it too and it worked for me Mar 22 20:36:52 follow my log Mar 22 20:36:57 http://pastie.org/1701280 Mar 22 20:37:02 from a running webOS Mar 22 20:37:18 hmm, memboot now, i did memload Mar 22 20:37:22 hm Mar 22 20:37:25 ok, rebooting and trying memboot Mar 22 20:37:34 how old is your novacomd on your host computer? Mar 22 20:37:43 is developer mode enabled? Mar 22 20:38:01 [2011/3/22 21:34:37] novacomd version novacomd-62 starting... Mar 22 20:38:04 yes, developer mode on Mar 22 20:38:13 ok Mar 22 20:38:36 you did memload when running webOS? Mar 22 20:38:38 that cannot work Mar 22 20:38:48 you should use memboot when _running_ webOS Mar 22 20:38:57 and memload when running bootie Mar 22 20:38:59 ah Mar 22 20:39:01 ok Mar 22 20:39:03 * mickey| make memboot Mar 22 20:39:10 follow my guide Mar 22 20:39:14 thats how it works Mar 22 20:39:19 on a pre with clean webOS install Mar 22 20:40:28 you did memboot twice? Mar 22 20:40:46 no Mar 22 20:41:02 make TARGET=pre memboot 3,39s user 4,74s system 24% cpu 33,716 total Mar 22 20:41:06 its the result line Mar 22 20:41:12 ok Mar 22 20:41:13 I have two stupid questions: If I'm building Image and I want to pause process for while should I just kill it and it will continue from where it was or ^Z it into backgrount > swap? Mar 22 20:41:17 * mickey| make lvm-resize Mar 22 20:41:21 ok Mar 22 20:41:30 and why the hell shr on sd with ext3 gets ext3 corrupted somehow? Mar 22 20:42:19 http://pastie.org/1701297 Mar 22 20:42:22 looks pretty much like yours Mar 22 20:42:53 great Mar 22 20:43:12 ok, next step Mar 22 20:43:27 make TARGET=pre KERNEL=downloads/uImage-palmpre.bin flash-kernel Mar 22 20:44:51 unexpected operator, but otherwise i guess ok Mar 22 20:44:56 hm Mar 22 20:44:57 http://pastie.org/1701306 Mar 22 20:45:55 next step or trying to find out what causes the error? Mar 22 20:46:36 next step Mar 22 20:46:45 when the kernel is in /boot it should be ok Mar 22 20:47:44 /boot or /tmp/boot? Mar 22 20:47:52 /tmp/boot contains two kernels now Mar 22 20:47:58 ok Mar 22 20:48:00 good Mar 22 20:48:11 you are using bash? Mar 22 20:48:24 no Mar 22 20:48:25 dash Mar 22 20:48:29 standard ubuntu Mar 22 20:48:32 i guess Mar 22 20:48:46 let me start bash before the next command just to make sure it's not that Mar 22 20:49:17 * mickey| flash-image Mar 22 20:49:42 ok Mar 22 20:49:47 I am using zsh here Mar 22 20:49:48 nope Mar 22 20:49:50 same error Mar 22 20:49:54 hm ok Mar 22 20:49:58 check /tmp/fso Mar 22 20:50:23 http://pastie.org/1701329 Mar 22 20:50:45 /tmp/fso present, not mounted Mar 22 20:51:10 hm Mar 22 20:51:19 can you mount it manually? Mar 22 20:51:44 yes, manualy works fine Mar 22 20:51:50 ok Mar 22 20:52:01 maybe we need to rework the flash-kernel/flash-image part Mar 22 20:53:13 then run Mar 22 20:53:29 novaterm put file:///tmp/fso/lite-palmpre.tar.gz < lite-palmpre.tar.gz Mar 22 20:53:31 and on the device Mar 22 20:53:43 cd /tmp/fso && tar xzf lite-palmpre.tar.gz -C /tmp/fso Mar 22 20:53:52 and verify that /tmp/fso has the rootfs in it Mar 22 20:57:11 maybe we should rewrite fso-installer in python ... Mar 22 20:57:18 or vala ... Mar 22 20:57:21 ok, /tmp/fso looks like a rootfs Mar 22 20:57:35 morphis, or as a webos App Mar 22 20:58:00 mickey|: ok Mar 22 20:58:04 Slyon: or that way Mar 22 20:59:09 mickey|: ok, now install-bootr Mar 22 20:59:23 makefile or manually? Mar 22 20:59:46 makefile Mar 22 21:00:00 we should at least give it a try Mar 22 21:00:00 done Mar 22 21:00:09 no errors this time Mar 22 21:00:40 http://pastie.org/1701373 Mar 22 21:01:42 any things to verify or make reboot? Mar 22 21:01:57 (makefile should contain a 'make check' target ;) Mar 22 21:03:13 make check would be nice Mar 22 21:03:35 looks good Mar 22 21:03:38 run reboot Mar 22 21:03:41 k Mar 22 21:04:06 bootr comes up, selecting shr Mar 22 21:04:32 palm logo... Mar 22 21:05:02 shr logo Mar 22 21:05:02 * Slyon got excited about meta-doctor, flashich webos 2.1 to my pre :) Mar 22 21:05:48 :) Mar 22 21:05:56 Slyon: but it runs slow sometimes ... Mar 22 21:06:04 mickey|: congratualiations! Mar 22 21:06:06 please wait, booting... Mar 22 21:06:26 morphis, okay... will see Mar 22 21:06:26 mickey|: you should do a hard reset after the first boot (when UI is up) Mar 22 21:06:31 and wizard is over Mar 22 21:07:08 ok, wizard over, pin dialog is there Mar 22 21:07:13 rebooting? Mar 22 21:08:19 tellbootie reboot doesn#t cut it from shr Mar 22 21:08:23 * mickey| reboot Mar 22 21:08:58 hmm, ok, i see what you mean Mar 22 21:09:01 * mickey| battery unplug Mar 22 21:09:37 fsogsmd/msmcommd is broken on first boot Mar 22 21:10:06 mickey|, i copied tellbootie from webos, to be able to reboot without unpluging the battery Mar 22 21:10:26 ya, but it just did nothing Mar 22 21:10:34 root@palmpre ~ # tellbootie reboot Mar 22 21:10:34 root@palmpre ~ # Mar 22 21:10:44 ah it's our tellbootie Mar 22 21:10:48 it's broken too Mar 22 21:10:51 heh Mar 22 21:10:53 run reboot -d -f Mar 22 21:10:56 or halt -d -f Mar 22 21:11:04 ok, booted for the 2nd time Mar 22 21:11:08 halt/reboot init process is hanging somewhere Mar 22 21:11:17 no you can enter your pin Mar 22 21:11:20 and see network connecting Mar 22 21:11:28 no pin dialogue yet... Mar 22 21:11:29 waiting Mar 22 21:11:48 mickey|: http://pastebin.com/Pbg5L1Us Mar 22 21:11:54 "your sim storage is full" Mar 22 21:11:54 heh Mar 22 21:11:56 Luca fixed the bug Mar 22 21:12:04 is pin disabled? Mar 22 21:12:13 ah, good Mar 22 21:12:16 pin is present Mar 22 21:12:17 unlocked Mar 22 21:12:34 no service provider visible though Mar 22 21:13:24 should it autoregister? Mar 22 21:13:27 jepp Mar 22 21:13:31 hmm Mar 22 21:13:35 look at shr-settings Mar 22 21:13:35 not here Mar 22 21:13:57 ssh in and take a look at fsogsmd.log/msmcommd.log Mar 22 21:15:50 ok, dbus get status looks good Mar 22 21:16:01 i guess the top bar has just crashed or is not listening Mar 22 21:16:21 let me try to place a call Mar 22 21:16:23 it's some kind of buggy this damn gadget Mar 22 21:16:27 :) Mar 22 21:16:50 hmm Mar 22 21:16:56 ? Mar 22 21:16:58 should i hear anything? Mar 22 21:17:01 no Mar 22 21:17:03 nothing Mar 22 21:17:09 oh Mar 22 21:17:11 as audio routing has to be done manually Mar 22 21:17:16 ah Mar 22 21:17:21 as it needs to be integrated into shr Mar 22 21:17:51 mrmoku is working on it Mar 22 21:17:55 ok Mar 22 21:18:01 what about wifi? Mar 22 21:18:04 but doing a outgoing call works? Mar 22 21:18:09 yes, outgoing call did work Mar 22 21:18:17 when you have an up-to-date image Mar 22 21:18:23 firmware should be in /lib/firmware Mar 22 21:18:31 then you can enable it via shr-settings Mar 22 21:18:48 and have to do ifconfig eth0 up manually Mar 22 21:18:57 it's missing in the powercontrol plugin currently Mar 22 21:18:58 hmm Mar 22 21:19:01 beforehand i guess Mar 22 21:19:07 shr tells "wifi not available" Mar 22 21:19:11 then you can use wifi via the shr wifi tool Mar 22 21:19:13 ok Mar 22 21:19:18 maybe some other bug Mar 22 21:19:22 look at cmdline Mar 22 21:19:25 if firmware is there Mar 22 21:19:27 root@palmpre /lib/firmware # ifconfig eth0 up Mar 22 21:19:27 ifconfig: SIOCGIFFLAGS: No such device Mar 22 21:19:31 when not image is too old Mar 22 21:19:51 or try to request WiFi ressource Mar 22 21:19:53 image from 14th of march, yours Mar 22 21:20:10 DBusException: org.freesmartphone.Usage.ResourceUnknown: Resource WiFi had never been registered Mar 22 21:20:20 hm Mar 22 21:20:36 hm Mar 22 21:20:43 is fsodeviced running? Mar 22 21:20:53 yes Mar 22 21:21:36 hm config looks old Mar 22 21:22:57 i need to go Mar 22 21:23:04 at least i can boot into shr now, thanks Mar 22 21:23:12 will see more soon Mar 22 21:23:13 cu Mar 22 21:25:31 captainigloo: ping **** ENDING LOGGING AT Wed Mar 23 02:59:57 2011