**** BEGIN LOGGING AT Fri May 13 02:59:58 2011 May 13 05:24:47 plotr: yup May 13 05:25:12 plotr: one of the shr guys that is going to bed early :-) May 13 05:25:33 moin May 13 05:26:13 I've tested 2.6.37 upgrade-path and now also reflash.. only task-base PR bump was forgotten May 13 05:26:44 moin JaMa|Zzz May 13 05:26:49 good May 13 06:11:33 freesmartphone.org: 03mok 07libgisi * r677e113c0c99 10/gisicomm/gisicomm.vala: May 13 06:11:33 freesmartphone.org: gisicomm: duh, get the call id from the correct byte May 13 06:11:33 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 06:11:34 freesmartphone.org: 03mok 07libgisi * r68bf28fe2f69 10/gisicomm/gisicomm.vala: May 13 06:11:34 freesmartphone.org: gisicomm: parse DESTINATION_ADDRESS subblocks too for call status indications May 13 06:11:34 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 06:12:34 freesmartphone.org: 03mok 07cornucopia * rc902c7047366 10/fsogsmd/src/plugins/modem_nokia_isi/callhandler.vala: May 13 06:12:34 freesmartphone.org: fsogsmd: modem_nokia_isi: handle outgoing calls via the status indication of gisi too May 13 06:12:34 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 06:12:44 now some daywork :) May 13 06:49:29 heyho May 13 06:49:35 moin morphis May 13 06:57:11 freesmartphone.org: 03morphis 07aurora * r7e65dbfca079 10/aurora/README: aurora: add dependencies need to run aurora to README May 13 06:57:12 freesmartphone.org: 03morphis 07aurora * r5178593e1607 10/aurora/ (3 files in 2 dirs): aurora: implement wrapper around phoneutils library and export it to QML May 13 06:57:12 freesmartphone.org: 03morphis 07aurora * r3cdac821872a 10/aurora/components/common/Dialpad.qml: Merge branch 'master' of ssh://git.freesmartphone.org/aurora May 13 06:59:53 SHR: 03Martin.Jansa 07shr-chroot * re6965a72e28b 10/ (786 files in 84 dirs): system upgrade May 13 08:40:45 freesmartphone.org: 03morphis 07utilities * r2d913cf6ccc6 10/palmpre/fso-installer/Makefile: May 13 08:40:45 freesmartphone.org: fso-installer: unmount lvm FSO parition after image is flashed successfully May 13 08:40:45 freesmartphone.org: Signed-off-by: Simon Busch May 13 08:44:31 JaMa|W: you said that now 2 screen sessions are neede, but currently there is just 1 running... May 13 08:49:03 Heinervdm: no.. both are running May 13 08:49:14 it's screen inside screen May 13 08:49:35 then screen -x attached to the wrong one May 13 08:49:46 and shr-core and shr-unstable builds are running May 13 08:49:59 just checked and screen -x is attached to right one May 13 08:50:03 and you're there :) May 13 08:50:42 :) May 13 08:50:44 do you need shr-t? May 13 08:50:55 ^A ^A c May 13 08:51:01 and cd shr-testing May 13 08:51:30 or ^AA c :) May 13 08:51:44 :) May 13 08:51:53 unless you're using screen on your host too (like I do) May 13 08:52:01 then you would need ^AAA c May 13 08:52:42 ok May 13 08:52:51 now i'm in a new session May 13 08:52:58 I know :) May 13 08:53:12 * JaMa|W watching May 13 08:53:13 efreet 56910 fixed the shr_elm_softkey issue May 13 08:53:32 so i want to rebuild efreet and e-wm and a new image May 13 08:54:21 maybe you should include that icon_cache script with it May 13 08:54:42 otherwise you will see those reports about missing icons on first boot May 13 08:54:46 that patch was already there May 13 08:54:51 ah ok then May 13 08:55:04 or wich one do you mean? May 13 08:55:47 efreet_icon_cache_create in FILES.. May 13 08:56:15 Heinervdm: btw instead of git pull you can do make update in ~ May 13 08:56:47 http://git.openembedded.org/cgit.cgi/openembedded/commit/recipes/efl1/efreet.inc?h=shr/testing2011.1&id=29a9436b4c4c96d97781f70e2019f9f401e3b012 May 13 08:56:59 it's there since 20. of february May 13 08:57:14 so i don't know why it's missing in shr-t May 13 08:57:57 OK.. I just expected it's missing because someone said on that bug that he doesn't have it May 13 08:58:18 but I don't remember if --enable-icon-cache was removed after 1.0 release or before.. May 13 08:58:40 it was before i think May 13 08:58:47 I had it in my EXTRA_OECONF for long May 13 09:00:05 56590 May 13 09:00:58 so it's before 1.0 - 56356 May 13 09:01:05 err after May 13 09:01:06 no after May 13 09:01:18 but now it will be there May 13 09:01:19 that's why you didn't have it in efreet-1.0 May 13 09:01:27 yes May 13 09:02:08 are you just building the kernel or more? May 13 09:02:17 kernel+image for om-gta01 May 13 09:02:23 and lite-image for shr-core May 13 09:02:23 ok May 13 09:02:32 feel free to start shr-t build though May 13 09:03:10 yo, let it glow ;) May 13 09:03:26 hmm, i see when you are switching the windows ;) May 13 09:03:38 ah, sorry :) May 13 09:03:55 that's cause we're both attached to middle layer screen May 13 09:03:56 no problem, i just thought that it has crashed ;) May 13 09:04:18 I'll detach May 13 09:04:27 hmm, bb not found May 13 09:04:33 . ./setup-env May 13 09:04:50 right May 13 09:05:37 Heinervdm: btw with that rotation bug someone reported lately.. May 13 09:06:21 he is doing sth wrong, but i think we can make his patch right if he sends it May 13 09:06:26 Heinervdm: newer xinput-calibrator used in shr-core supports xorg.conf.d calibration (which is maybe handled different than xinput calls during xserver startup) May 13 09:07:02 Heinervdm: and there are also 1.10.1 recipes and I'm using 1.10.1 for a while, but without tslib (with evdev again) May 13 09:08:03 so instead of fixing it in 1.9 xserver I would push 2015 and switch to 1.10.1 May 13 09:08:15 http://patches.openembedded.org/patch/2015/ May 13 09:08:32 elfe doesn't like EmulateRightButton anyways May 13 09:08:49 ok May 13 09:08:52 maybe I should have done this with this new 2.6.37 images.. May 13 09:09:18 so I will this weekend May 13 09:09:24 so shr-u is using 1.9 too? May 13 09:09:55 yes, for now, but with 2015 pushed I can switch May 13 09:10:29 ok, then i think we should wait some weeks after pushing it to unstable before switching in testing too May 13 09:10:58 and then, there is just this annoying "loosing GSM during suspend" bug... May 13 09:11:42 agreed.. just wanted to let you know about 1.10 in OE before you spend much time on that rotation issue May 13 09:12:01 ok :) May 13 09:14:03 JaMa|W: have you heard sth about loosing GSM during suspend in shr-u? May 13 09:15:45 no May 13 09:50:21 GNUtoo|laptop: hey, calls should work now fine with my last commits... including accepting and releasing May 13 09:50:40 ok May 13 09:51:39 GNUtoo|laptop: note, that you have to do a clean build (maintainer-clean) for libgisi and fsogsmd May 13 09:51:47 otherwise it might not pick up the vapi changes May 13 09:51:56 ok May 13 09:52:02 an oe build will go then May 13 09:52:10 s/go/work/ May 13 09:52:11 GNUtoo|laptop meant: an oe build will work then May 13 09:52:15 yup May 13 09:59:14 GNUtoo|laptop: I continue with messages then? May 13 09:59:44 yes May 13 09:59:48 ok May 13 09:59:56 let me finish to git commit the buglabs stuff May 13 10:00:02 and then I'll look at it May 13 10:00:03 sure May 13 10:00:10 take your time May 13 10:00:25 btw yesterday I understood why I didn't understand a thing about isi May 13 10:00:25 will have lunch now anyway :) May 13 10:00:33 it's because I didn't look at the docs May 13 10:00:54 which ones ? May 13 10:00:56 docs = datasheet, headers, ofnono etc.... May 13 10:01:01 ok May 13 10:01:02 I looked at none May 13 10:01:24 actually I started to like isi a lot May 13 10:01:40 it may be better than AT, but it's less standard May 13 10:01:52 the good thing is that the audio doesn't need a wire May 13 10:02:16 so for instance you can make your computer a phone.... May 13 10:02:28 if you find a nokia 3g stick that talks isi May 13 10:04:31 at the cost of battery life May 13 10:04:35 & CPU power May 13 10:07:21 for some applications it could be used May 13 10:07:24 not as a phone May 13 10:07:35 but think pbx May 13 10:07:38 or similar stuff May 13 10:08:03 or as a stationary phone May 13 10:08:28 replacing a cellphone is not a good idea with that usb stick May 13 10:08:37 but there are other uses May 13 10:09:00 for the bug device it could be great for instance May 13 10:09:18 since it doesn't need wired audio.... May 13 10:09:37 you could do an asterisk IVR interface for something for instance May 13 10:09:40 no idea if there is juch a thing as an isi usb stick May 13 10:09:50 * GNUtoo|laptop looks May 13 10:09:52 such even May 13 10:11:38 there is one from nikia May 13 10:11:56 question is if it talks isi May 13 10:12:14 let's look in the udev rules May 13 10:12:17 and it will tell May 13 10:12:39 good idea May 13 10:14:10 KERNEL=="shrm0", ENV{OFONO_DRIVER}="u8500" May 13 10:14:21 the rest is n900 and pc suite May 13 10:14:27 so it seems that there is one May 13 10:15:15 ok May 13 10:15:46 else if (g_strcmp0(driver, "u8500") == 0) May 13 10:15:47 add_isi(modem, udev_device); May 13 10:15:50 that also confirms it May 13 10:16:37 ah... May 13 10:16:44 it seems that it's a smartphone May 13 10:16:46 not a modem May 13 10:18:43 sad May 13 10:21:25 rather it's not a smartphone per se, but rather a devboard aimed at smartphones development May 13 10:54:43 playya: can you send shtool recipe as patch? May 13 10:59:26 we will probably get more problems with jffs2, as raster loves mmap May 13 11:00:10 is it the same problem with ubi? May 13 11:01:10 no May 13 11:01:16 ubifs is fine May 13 11:01:30 so perhaps we should force everyone to use ubifs May 13 11:02:41 or move mmapped parts to tmpfs :) May 13 11:02:51 like .appshadow May 13 11:03:18 but with need to copy it back and forth on boot/halt :/ May 13 11:07:49 morphis: ping May 13 11:16:43 /j pandaboard May 13 11:16:50 oops May 13 11:25:07 mrmoku, I'll send some patches to the oe ml, and within theses patches there is one which update ofono, did you make it? May 13 11:34:04 GNUtoo|laptop: no May 13 11:34:16 who made it? May 13 11:34:27 what does git tell? May 13 11:34:38 somebody pasted it to me here May 13 11:34:43 in a pastebin May 13 11:34:46 ahh, now I understand May 13 11:34:50 let me show the commit May 13 11:34:59 I locally bumped ofono... and probably pasted that for you back then May 13 11:35:32 http://pastie.org/1896543 May 13 11:35:53 ok, should I add you in the signed off? May 13 11:36:09 feel free May 13 11:36:17 to do that May 13 11:36:22 ok thanks May 13 11:36:25 np May 13 11:41:55 mrmoku, what did it fix already May 13 11:41:56 ? May 13 11:42:08 the ofono bump? May 13 11:42:29 there was something quite essential not working before that on n900 May 13 11:42:40 maybe mickey|office remembers... May 13 11:45:08 ok May 13 12:01:05 mickey|office: hi, btw i can now make call from my qt test program, it works really nice May 13 12:01:56 mickey|office: only problem until now is with qdbusxml2cpp - which cant automatically generate methods with more complicated signature May 13 12:03:25 did it register without that patch? May 13 12:04:43 GNUtoo|laptop: hmm... thinking about it... I installed while investigating GPRS... so it probably was that May 13 12:05:07 yeah, GPRS did not work with older revs. I think I remember now :) May 13 12:06:37 ok May 13 12:20:29 are you sure it's GPRS May 13 12:20:37 it was at the time when registration didn't work May 13 12:20:40 that you gave me that May 13 12:20:47 grmpf May 13 12:20:53 my memory sucks awfully May 13 12:21:04 you need it for the commit message? May 13 12:21:23 just write something like 'needed to get enhancements for n900' May 13 12:21:25 radekp: cool. ya, qdbusxml2cpp has some problems with a{sv} and similar. i'm open to adding the necessary annotations to the source files May 13 12:21:25 yes May 13 12:21:30 ok May 13 12:21:40 I hope paul menzel won't complain then....lol May 13 12:21:46 because I bet he will May 13 12:22:01 mickey|office: do you remember what for the ofono bump was needed? May 13 12:22:10 SIM handling at all May 13 12:22:15 ahh May 13 12:22:16 ok May 13 12:22:17 SIM handling May 13 12:22:18 thanks a lot May 13 12:22:21 :) May 13 12:22:25 be back very soon May 13 12:22:31 * mrmoku goes and takes his ginseng pills :P May 13 12:22:47 (just looking the real not-e mail for the palm pre) May 13 12:23:18 mickey|office: great i will try to send a patch then May 13 12:23:30 mickey|office: if i figure it out.. May 13 12:25:23 okies May 13 12:28:31 hmmm still nothing(no palm letter) May 13 12:28:36 is it a recommanded letter? May 13 12:31:32 radekp: what do you think of QML? May 13 12:35:20 mickey|office: i havent looked at it yet :( May 13 12:35:48 mickey|office: but i currently cant upgrade qt to 4.7 in qtmoko because of problems with qbuild May 13 12:35:50 oh, ok. you should try to, if you have a moment May 13 12:35:53 *nod* May 13 12:36:30 mickey|office: sure, i will try to learn it May 13 12:55:49 heyho May 13 12:55:50 hi morphis May 13 12:55:56 I didn't get the letter yet May 13 12:56:10 is it a normal letter, or a recommanded one? May 13 12:56:48 normal one May 13 12:56:53 ok May 13 12:56:53 but Slyon didn't get one May 13 12:56:57 ah? May 13 12:56:58 and he already got his device May 13 12:57:09 I don't have mine too May 13 12:57:11 how to know when the device comes? May 13 12:57:14 even waiting May 13 12:57:19 ok May 13 12:57:21 you can't know :) May 13 12:57:26 lol ok May 13 12:57:29 I waited for the pre plus around 4 months May 13 12:57:37 ok May 13 12:57:54 if next week nothing is arrived I will write to palm again May 13 12:57:58 so it comes directly by the post office May 13 12:58:00 ? May 13 12:58:07 like in a package May 13 13:00:56 morphis: i did some additions to the announcement letter. feel free to add more thoughts, we should try to send it out by sunday May 13 13:16:58 mickey|office: ok, sunday sounds good May 13 13:17:06 GNUtoo|laptop: it will arrive by UPS May 13 13:17:18 that was the case for my Pre Plus May 13 13:18:22 ok May 13 13:21:12 morphis: where did the 'back' button go? i can't seem to find a way to get out of the dialer back to the launcher May 13 13:22:12 mickey|office: it's currently gone May 13 13:22:21 as I rewrote the application handling May 13 13:22:33 I need to bring it back May 13 13:23:29 mickey|office: or do you have a better idea to do it? May 13 13:23:55 btw. it is already running nice on the device May 13 13:25:27 lets think about the UI flow right after 0.1 May 13 13:25:36 we need a simple proof of concept beforehand May 13 13:25:40 so don't bother too much for now IMO May 13 13:25:51 i had no chance to test on the device :/ May 13 13:25:54 can you make a video? May 13 13:27:09 indeed how to install on the device May 13 13:27:17 with distutils? May 13 13:27:26 mickey|office: there is currently not very much May 13 13:27:29 just opening the dialer May 13 13:27:40 will do it when there is more content in aurora May 13 13:27:42 GNUtoo|laptop: automake May 13 13:27:56 ok May 13 13:28:01 I tought it was python May 13 13:28:07 *written in python May 13 13:28:16 GNUtoo|laptop: yes May 13 13:28:31 but it is using automake as build tool :) May 13 13:28:42 ok, strange...lol May 13 13:28:44 morphis: go away! May 13 13:29:03 GNUtoo|laptop: look at EFL python, they are using it too for the python bindings May 13 13:29:09 ok May 13 13:29:46 although i prefer distutils it starts getting messy when you have non-python components May 13 13:29:52 so it's better to start w/ autotools right from the start May 13 13:30:00 since we will have vala and c++ stuff soon May 13 13:30:06 all in one project May 13 13:30:08 yay... May 13 13:30:09 ;) May 13 13:30:11 lol ok May 13 13:31:16 would be interesting to check whether we can improve the rendering performance on n900 May 13 13:31:24 it looked a bit sluggish to me there May 13 13:32:12 I could look at the kenrel and omapfb options May 13 13:32:27 but I really don't want non-free 3d on it May 13 13:33:11 (all my efforts would have been in vain if there is non-free 3d) May 13 13:33:16 i don't care about 3d May 13 13:33:24 so yes, would be cool to check omapfb May 13 13:33:57 is X using any accelerations on the 900? May 13 13:34:14 no idea but I know there are possible accelerations May 13 13:34:30 and both the kenrel and xf86-video-omapfb have them May 13 13:34:38 altough I'm not sure they are all active May 13 13:34:44 I'll check May 13 13:34:55 right now it's compiling May 13 13:35:25 I've also to remove oss May 13 13:35:33 that breaks alsa multiplexing May 13 13:35:41 intone loads oss May 13 13:35:52 which makes multiplexing not work anymore May 13 13:36:08 because it blocks the other streams with oss May 13 13:36:35 mickey|office: but you right for the annoucement it would be nice to have some media we can show May 13 13:38:32 yep, get rid of oss May 13 13:38:38 it undermines our alsa settings anyways May 13 13:41:47 NOTE: package fsogsmd-1_0.5.0+gitr38+c902c704736694ded1343375a6fa4e6cb2234b31-r5.2: task do_compile: Failed May 13 13:41:56 nokiaisi is the cause: May 13 13:42:23 http://www.pastie.org/private/d7xfediafuo7ndzgx53g May 13 13:42:58 | mediators.vala:319.9-319.41: error: The name `queryStatus' does not exist in the context of `GIsiComm.SIM' May 13 13:42:58 | NokiaIsi.isimodem.sim.queryStatus( ( err, code ) => { May 13 13:43:07 mrmoku, ^^^ May 13 13:43:17 last night I had the same error with om-gta02 May 13 13:43:39 mickey|office: I will update the build process on amethyst for aurora this evening May 13 13:43:46 so we have some images ready for people to test May 13 13:45:34 ok, good May 13 13:45:44 GNUtoo|laptop: shit May 13 13:45:47 GNUtoo|laptop: moment May 13 13:45:49 it would be good to at least be able to initiate a phone call May 13 13:45:54 ok May 13 13:45:56 but that will take a bit longer May 13 13:46:14 as we need an agent for that, and it's also first time in the other direction (i.e. qml -> agent) May 13 13:47:23 freesmartphone.org: 03mok 07cornucopia * r8020eb10b1b4 10/fsogsmd/src/plugins/modem_nokia_isi/ (5 files): May 13 13:47:23 freesmartphone.org: fsogsmd: modem_nokia_isi: start splitting the mediators in different files May 13 13:47:23 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 13:47:56 GNUtoo|laptop: sorry... wanted to clean that split a bit first May 13 13:48:23 is it ok now? May 13 13:48:44 should be... at least I've nothing else dirty in my tree :) May 13 13:49:13 ok May 13 13:49:17 I'll recompile then May 13 13:50:25 mickey|office, how to try aurora on n900? May 13 13:50:30 is there a recipe for aurora? May 13 13:50:39 morphis? May 13 13:50:53 (no idea for myself, i'm only working on the desktop yet) May 13 13:50:56 * JaMa|W seen it in aurora branch in git.fso/oe May 13 13:51:08 so it's not mainline? May 13 13:51:23 no afaik May 13 13:51:30 ok May 13 13:53:09 GNUtoo|laptop: there is May 13 13:53:42 ok May 13 13:53:50 GNUtoo|laptop: but not upstream yet May 13 13:53:55 http://git.freesmartphone.org/?p=openembedded.git;a=blob_plain;f=recipes/freesmartphone/aurora_git.bb;h=ee5a36e027525beb1ebdc99584c8f676fe99e612;hb=574b3cde503c40ab5721963e51c06aa16353036b May 13 13:54:07 http://git.freesmartphone.org/?p=openembedded.git;a=shortlog;h=refs/heads/aurora/development May 13 13:54:09 yes May 13 13:54:52 :) May 13 14:03:27 mrmoku: May 13 14:03:30 | mediators_sim.vala:159.6-159.40: error: The name `changePin' does not exist in the context of `GIsiComm.SIMAuth' May 13 14:03:30 | NokiaIsi.isimodem.simauth.changePin( oldpin, newpin, ( err ) => { May 13 14:10:48 GNUtoo|laptop: hmm May 13 14:12:17 freesmartphone.org: 03mok 07libgisi * r128033e78951 10/gisicomm/gisicomm.vala: May 13 14:12:17 freesmartphone.org: gisicomm: add changePin May 13 14:12:17 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 14:12:22 GNUtoo|laptop: sorry again :/ May 13 14:12:48 maybe wait and let me push the started sms too May 13 14:13:43 freesmartphone.org: 03mok 07libgisi * rc993ee694ea9 10/ (data/libgisi.vapi gisicomm/gisicomm.vala): May 13 14:13:43 freesmartphone.org: start to implement the SMS resource May 13 14:13:43 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 14:13:53 GNUtoo|laptop: ok, now it _must_ build :) May 13 14:14:09 mrmoku: your getAuthCodeRequired has a flaw. If ISI doesn't answer with a valid reply the call will get stuck forever. please set the error code to the outside of the closure, _always_ call the callback, and raise an exception, if appropriate, after the yield May 13 14:14:42 mickey|office: ahh, ok. I thought throwing an exception would change things May 13 14:14:54 ok, will do that May 13 14:16:00 the dbus call will only get a reply if a) we throw an exception in the mediator, or b) the control flow gets to the end of the function May 13 14:16:12 that's easy to miss, don't ask me how often i forgot about that May 13 14:16:44 async. coroutines are nice, but they come with a responsibility ;) May 13 14:18:04 freesmartphone.org: 03mok 07cornucopia * r8cfe7d56c50b 10/fsogsmd/src/plugins/modem_nokia_isi/mediators_sim.vala: May 13 14:18:04 freesmartphone.org: fsogsmd: modem_nokia_isi: fix control flow in IsiSimChangeAuthCode May 13 14:18:04 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 14:18:12 mickey|office: that is better? May 13 14:20:11 so I am off May 13 14:20:12 cya May 13 14:20:53 mrmoku: i was talking about getAuthCodeRequired May 13 14:20:59 ChangeAuthCode was already ok May 13 14:21:56 (although it's better to raise the exception not from inside the closure, so that patch was an improvement anyways) May 13 14:23:45 mickey|office: ahh, now I see :) May 13 14:27:59 freesmartphone.org: 03mok 07cornucopia * r7be463d9a3e3 10/fsogsmd/src/plugins/modem_nokia_isi/mediators_sim.vala: May 13 14:27:59 freesmartphone.org: fsogsmd: modem_nokia_isi: we _must_ always use callback May 13 14:27:59 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 14:28:37 * mrmoku off to mow the lawn May 13 14:28:38 bbiab May 13 15:19:20 has anyone tried the new kernel 2.6.37 on a sdhc card? May 13 15:19:45 darkh: what device ? May 13 15:19:56 ah gta02 May 13 15:20:20 on the second partion of the 4gb sdhc May 13 15:20:42 kernel 2.6.34.8 works without problems but the new one panics May 13 15:20:46 maybe we should put into the topic that this is not only about the openmoko phones. the Openmoko Community Developers Channel headline might suggest this... as does the channel name May 13 15:21:05 :> May 13 15:21:22 darkh: maybe something changed and you need to alter your CMDLINE ? May 13 15:21:34 darkh: or initramfs ? May 13 15:21:58 well.. what exactly should i change? May 13 15:24:17 darkh: I don't know how your boot process works May 13 15:24:29 darkh: it might as well be a case of malconfiguration of the kernel May 13 15:25:06 i guess so, as i have not changed qi nor the append-gta02, just the new kernel May 13 15:25:10 darkh: e.g. if you have an ext3 partition on your SD and don't have ext3 built in - or supply it via module before mounting- you will get a panic when mounting May 13 15:25:28 darkh: qi ? May 13 15:25:50 qi the bootloader for ther the gta02 May 13 15:26:41 ext3 support should be compiled into the kernel, at least i cannot find it as module May 13 15:26:57 i doubt jama forgot ext3 support May 13 15:29:13 darkh: read the .config May 13 15:29:39 darkh: if JaMa|Off compiled your kernel you might ask him for potentially required changes in your boot chain May 13 15:32:02 i'll ask him, i have no other ideas how to solve that issue May 13 15:32:58 darkh: do you get unable to mount rootfs on unkown block (n,n) ? May 13 15:33:11 exactly May 13 15:33:36 but what is the reason? ext3 support shouldn't be the problem May 13 15:36:24 i guess i really have to wait for JaMa|Off May 13 15:36:25 lack of fs support is a potential problem with that error May 13 15:37:07 maybe the name of your sd card device node changed May 13 15:37:52 if the bootloader passes "root=/dev/mmcblk0p2" to the kernel, but the kernel only can offer /dev/sdcard0p2 or whatever it won't work May 13 15:37:58 another potential program here (naming) May 13 15:38:20 s/program/problem/ May 13 15:38:20 dcordes meant: another potential problem here (naming) May 13 15:38:30 * dcordes thinks May 13 15:38:56 that's all I can think of right now. make sure you don't have one of these problems then you are one step further May 13 15:39:13 you can read the kernel commit log on mmc changes May 13 15:39:25 i will try May 13 15:39:32 as well as your .config and you can double check that your rootfs is known working with other kernel May 13 15:39:45 that's all I can propose :) hope it helps! May 13 15:40:02 it works with the old kernel May 13 15:40:33 JaMa|Off, yes. if it works ;) May 13 15:40:36 as the only thing i changed is the kernel... some change in the kernel is to blame for the problems May 13 15:41:24 captainigloo, ping May 13 15:44:25 playya: hi. did you succeed with your panda board shr-image ? May 13 15:45:07 nope May 13 15:45:40 playya: are you pinging captainigloo for efl related things :) ? May 13 15:45:44 I will bbiab May 13 15:46:03 no. openmax and gst-ducati May 13 15:46:54 dcordes, hi I know edje now, but I lack practice May 13 15:53:17 darkh: heyho, works for me on SDHC, but some cards wants different sd clock May 13 15:54:06 darkh: would be great if you can confirm that it's also the case for you May 13 15:54:40 well.. what clock should i use with the new kernel? 2.6.34 worked May 13 15:54:55 darkh: http://docs.openmoko.org/trac/ticket/1743 May 13 15:55:40 JaMa|Off: do you think it might be a problem having the rootfs on the second partition? May 13 15:55:44 darkh: don't know the value.. default worked with my uSD with .29, .32, .34, .37 May 13 15:55:55 darkh: no I'm booting from both fine May 13 15:56:21 strange May 13 15:56:25 darkh: check /proc/cmdline if you have qi which passes rootwait May 13 15:56:30 instead of rootdelay May 13 15:56:47 i have rootwait in append-gta02 May 13 16:00:54 ok... a little step further... maybe i haven't done depmod properly the first time May 13 16:03:56 did you opkg upgrade? May 13 16:04:25 then depmod is called by opkg and anyways it cannot cause unknown-block (as no module is needed to mount rootfs) May 13 16:04:25 no copied it by hand May 13 16:04:49 -.- panic again May 13 16:05:34 hm have to double-check.. but maybe the sd clock stuff is to blame for the problems May 13 16:11:57 Linux om-gta02 2.6.37.6 #1 Fri May 13 08:06:01 CEST 2011 armv4tl GNU/Linux <-- l finally got the right clock values JaMa|Off... or at least one that are working May 13 16:27:54 lol I've xruns May 13 16:28:13 I must do it better May 13 16:28:24 but it worked at first try....with xruns May 13 16:29:42 I can only ear the remote for now tough May 13 16:29:58 I knew I would have buffer underruns May 13 16:30:09 since I didn't handled them and sent the full buffer to the card May 13 16:31:44 (krrr benvenuto krr nell krr servizio krrr.....) May 13 16:46:27 GNUtoo|laptop: congrats, that's progress May 13 16:46:41 hi mickeyl May 13 16:46:46 hi angelox_123 May 13 16:46:59 i've saw changes on aurora May 13 16:47:02 cool May 13 16:47:06 :) May 13 16:47:13 still a long way to go, but we'll get there May 13 16:47:21 I'll work a bit on the cellular network gadget now May 13 16:47:37 hmm,i still working in settings app May 13 16:47:58 i would propose one thing May 13 16:49:40 yes? May 13 16:49:56 mickeyl, yes now I need to handle the period size May 13 16:50:02 mickeyl: change Button.qml and fix MouseArea problems.. i can't use the button for other things because the button doesn't change his colors when you click using mousearea for another task May 13 16:51:07 angelox_123: sounds good. please propose a patch and send it to the smartphones-list, so we can have a look. or, if you prefer, give me your ssh key and you can add a personal branch in our repository for development May 13 16:51:12 hmm May 13 16:51:20 ImportError: No module named phoneutils May 13 16:51:22 tss... May 13 16:51:49 i'm getting that here now too May 13 16:51:54 after git pull* May 13 16:52:25 ya, looks like morphis forgot to commit a file May 13 16:52:27 mickeyl: I've already send my ssh key to morphis,he added me... May 13 16:53:07 oh, ok May 13 16:55:19 freesmartphone.org: 03mickey 07aurora * r6d04e33e018c 10/aurora/aurora/extensions/utils.py: aurora: work around missing phoneutils May 13 17:06:01 mickeyl: strange here,it asks for my ssh key,everything ok,but it asks for a "git@git.freesmartphone.org's password:" and i don't know it :\ May 13 17:06:26 it should not ask for a password if the ssh key validation is correct May 13 17:06:36 let me check May 13 17:07:50 ok May 13 17:08:20 looks ok, please /msg it to me so i can verify with what's on the server May 13 17:08:34 ok May 13 17:09:45 hmm, looks ok as well May 13 17:10:16 you are cloning with : May 13 17:10:22 git clone git@git.freesmartphone.org:aurora May 13 17:10:22 ? May 13 17:11:47 mrmoku, http://www.pastie.org/private/knwqapsf1pr1mnrwq7obw May 13 17:11:54 mickeyl: I submitted the patch, again, corrected and updated for the latest Makefile :) May 13 17:11:58 no,i tried clone with: "git clone ssh://git@git.freesmartphone.org/aurora.git" tried too with "git clone git://git.freesmartphone.org/aurora" and worked,but i couldn't push a branch May 13 17:11:58 I've some issues with conversions May 13 17:12:04 int to Frames etc... May 13 17:12:12 NuttyBunny: cool, thanks. morphis will take a look May 13 17:12:21 frames are a typedef in alsa May 13 17:12:32 angelox_123: which command did you try to push? May 13 17:12:46 if you have a local branch named foo you need to push with something like May 13 17:12:57 git push origin foo:angelox/testing May 13 17:13:00 e.g. May 13 17:13:07 I thik it's some long May 13 17:13:15 I'll verify May 13 17:13:41 yes that's it May 13 17:13:43 long May 13 17:13:47 mickeyl,hmm,let me try it May 13 17:13:47 I'll convert to long May 13 17:14:48 alsa.vala:465.27-465.32: error: Argument 1: Cannot pass value to reference or output parameter May 13 17:14:49 hwparams.get_period_size(frames,dir); May 13 17:14:55 what's does the out do? May 13 17:15:12 it's like a pointer parameter? May 13 17:15:16 yeah May 13 17:15:16 like for instance: May 13 17:15:29 foo ( &something ); May 13 17:15:38 foo ( type * ){} May 13 17:15:44 but how do I use it? May 13 17:15:54 I use &something or something May 13 17:15:57 in foo May 13 17:16:01 foo( out bar ) May 13 17:16:07 ok May 13 17:16:19 as use I meant call a function that has an out May 13 17:16:39 (I didn't see a ; in your foo(out bar) May 13 17:16:43 ; May 13 17:16:46 ok May 13 17:16:48 thanks a lot May 13 17:17:00 btw., some functions may have been bound incorrectly, so it's worth doing a double-check with the API May 13 17:17:07 so in case something looks wrong to you, just holler May 13 17:17:16 [in the vapi] May 13 17:19:06 hmm, how can i provide access to a global element throughout some of the qml's ? May 13 17:20:00 mickeyl: Would you know a good branch name to don't turn aurora's branches ugly :) ? May 13 17:20:19 just call them angelox/ for now May 13 17:20:34 they should be temporary anyways, since we want to merge back into master regular May 13 17:20:45 ok,thanks May 13 17:20:46 so only for trying out new features May 13 17:20:47 np May 13 17:23:43 sorry,i don't understand a lot of git,but see: i created with "git checkout -b angelox/settings.app" (for testing of settings app),should i do a "git push origin angelox/settings.app:angelox/testing" or only "git push origin angelox/settings.apps" ? May 13 17:28:51 git push origin angelox/settings.app:angelox/testing should do it May 13 17:29:12 i'm not a git wizard either, if in doubt, i always use the fully qualified call May 13 17:29:43 thanks again :) May 13 17:30:23 hmm got error May 13 17:30:25 fatal: The remote end hung up unexpectedly May 13 17:31:26 hmm, strange May 13 17:31:30 yes... May 13 17:31:30 can you show the full output? May 13 17:31:35 (pastie.org) May 13 17:31:44 this is the only line that it shows May 13 17:32:16 freesmartphone.org: 03mickey 07aurora * re759633f0375 10/aurora/ (5 files in 3 dirs): May 13 17:32:16 freesmartphone.org: aurora: add singleton and derive the agents from the singleton, so that May 13 17:32:16 freesmartphone.org: we can easily make them available in every QML component May 13 17:32:31 hmm May 13 17:32:59 what does 'git remote show origin' list? May 13 17:33:41 btw i did for cloning: "git clone git://git.freesmartphone.org/aurora" May 13 17:33:59 hmm May 13 17:34:05 i don't think that works May 13 17:34:05 http://pastie.org/1897568 May 13 17:34:12 you must use git@git May 13 17:34:16 how should i clone? May 13 17:34:20 hmm May 13 17:34:22 like i said some lines before May 13 17:34:30 git clone git@git.freesmartphone.org:aurora May 13 17:34:38 otherwise you clone in anonymous mode May 13 17:34:42 and with that tree you can't push May 13 17:34:56 ah sorry i didn't see that message from you May 13 17:35:37 hmm still asking for password May 13 17:35:48 on clone? May 13 17:35:48 gitweb shows the url you need to clone ;) May 13 17:36:02 mickeyl: yes :\ May 13 17:36:04 hmm May 13 17:36:07 i'm afraid i'm out of ideas May 13 17:36:10 ssh key? May 13 17:36:13 it has worked for a lot folks May 13 17:36:29 maybe i should send a new ssh key? May 13 17:36:40 is your ssh key password protected? May 13 17:36:58 if so, it might need that one May 13 17:36:59 i don't remember if i put password May 13 17:37:09 ah, in that case... new key is it i'm afraid May 13 17:37:15 let me generate a new one May 13 17:37:34 angelox_123, you can try to add sth like this to .ssh/config May 13 17:37:37 Host fso May 13 17:37:37 User git May 13 17:37:37 Hostname git.freesmartphone.org May 13 17:37:37 IdentityFile ~/.ssh/id_dsa May 13 17:38:28 i've already generated a new key :\ May 13 17:39:05 mickeyl: could you give-me your email to i send my new ssh key? May 13 17:39:07 btw. send the .pub file ;) May 13 17:39:38 sure ;D May 13 17:39:45 GNUtoo|laptop: re May 13 17:39:50 problem still persists? May 13 17:39:58 angelox_123: mickey vanille-media de May 13 17:40:37 mrmoku, what problem, the vala problems are gone, I'm fighting against alsa now May 13 17:40:57 ok :) May 13 17:41:21 mickeyl: sent,thanks May 13 17:45:46 heyho May 13 17:45:55 mickeyl: ping May 13 17:45:58 hi morphis May 13 17:46:03 angelox_123: heyho May 13 17:46:10 moin morphis May 13 17:46:22 angelox_123: how far are you with the settings application? May 13 17:46:25 playya: you got my mail? May 13 17:46:29 yes May 13 17:46:34 morphis: pong. May 13 17:46:54 playya: I didn't found my old notes with some more detail information May 13 17:47:03 maybe i can create some traces the next days and extend my tools May 13 17:47:07 morphis: creating functions for buttons,and learning about page changes May 13 17:47:13 ok :( May 13 17:47:16 I tried to get something out of the payload of the GPS messages but I got stuck with the packed float numbers May 13 17:47:25 angelox_123: ah ok May 13 17:47:39 playya: the initial stuff should be easy May 13 17:47:48 implement the basic messages May 13 17:48:06 the tricky one is to get the right bytes out of the payload for long/lat May 13 17:48:10 morphis: i'm now waiting mickey lallow my new ssh key,since the other one we got problems :\ May 13 17:48:16 but i need the length of the data May 13 17:48:19 angelox_123: ah ok May 13 17:48:28 playya: you mean of the payload? May 13 17:48:32 yes May 13 17:48:36 no problem May 13 17:49:01 hmm May 13 17:49:03 *sigh* May 13 17:49:07 singletons and pyside ... May 13 17:49:20 __new__ called w/ () {} May 13 17:49:20 Speicherzugriffsfehler May 13 17:50:06 playya: in webos 2.1 logs you have to count and in webos 1.4.5 you get the correct number with the log May 13 17:50:12 mickeyl: :) May 13 17:50:26 do you have any other idea how to make something globally accessible? May 13 17:50:39 we only want one instance of the DevicePowerAgentFSO May 13 17:50:42 etc. May 13 17:50:45 hm May 13 17:50:45 (all agents) May 13 17:50:55 do some wrapper class which then calls the agent May 13 17:50:58 or do we need a globally visible Item ? May 13 17:50:59 äh singleton May 13 17:51:04 we can do that do May 13 17:51:11 with rootContext.setContextProperty May 13 17:51:16 like I did for the phoneutils May 13 17:51:18 how do you make something accessible anyways in QML that's not in the current namespace? May 13 17:51:20 maybe the better way May 13 17:51:37 how does name lookup works in qml? May 13 17:51:42 do they scan the parent hierarchies? May 13 17:51:49 they do May 13 17:51:52 hmm May 13 17:52:04 for example you can access the rootWindow from all child components May 13 17:52:22 then we should add the dbus agents to the top level namespace May 13 17:52:23 so we can register a setContextProperty("deviceAgent", DeviceAgent()) May 13 17:52:28 ok May 13 17:52:32 k, will try May 13 17:52:37 great May 13 17:52:46 do we still need the registerType then? May 13 17:53:22 no May 13 17:53:40 but the agents should inherit from QObject rather than QDeclarativeItem May 13 17:53:50 good. that is sane anyways May 13 17:53:56 no need for them to be declarativeitems May 13 17:54:01 * mickeyl tries May 13 17:54:06 playya: for HCI_PDSM_PD_EVENT_DONE it's 871 bytes May 13 17:54:44 angelox_123: got your mail, but you did send the private key, please send id_dsa.pub instead May 13 17:55:51 oh my god,i didn't see,sorry May 13 17:57:02 hi DocScrutinizer, you seem to know alsa well: May 13 17:57:08 here's my aplay -v : http://www.pastie.org/private/ow3gnfmrxbnbegqvpq1zq May 13 17:57:21 that's relative :-) May 13 17:57:22 anyone here is fit with binary representation of float/double numbers? May 13 17:57:24 how does it convert from 8000 to 48000 May 13 17:57:26 ? May 13 17:57:41 does aplay take care of it or is it the alsa libraries May 13 17:58:03 I remember that it's not the kernel May 13 17:58:09 morphis: wah, that's been ages ago :/ what do you need it for? May 13 17:58:20 I've to play 8000 Hz and it doesn't play at 8000 May 13 17:58:33 mickeyl: find the bytes in the haystack that are relevant for msmcomm GPS support :) May 13 17:58:36 I mean the rate is wrong at least May 13 17:58:44 since I've some low pitch May 13 17:58:44 mickeyl: sent again,thanks for advice May 13 17:58:47 Plug PCM: Rate conversion PCM (48000, sformat=S16_LE) rate : 8000 May 13 17:58:48 mickeyl: so I have a lot of bytes and the coordinates as plain numbers May 13 17:58:58 mickeyl: and then need to find them in the hex values May 13 17:59:10 DocScrutinizer, so it's the alsa lib, but how do I do that? May 13 17:59:26 I want to write the cmtspeech alsa backend May 13 17:59:46 and I setup the *hardware* parameters to 8000 May 13 17:59:48 plug automaticaly converts whatever needed to match between upper and lower end of that plugin May 13 17:59:52 ok May 13 18:00:01 so I should call plug instead of the default May 13 18:00:04 sound card May 13 18:00:10 you did it seems May 13 18:00:56 plug opens upper end with 48000, S16_LE, and lower end with 8000 S16_LE May 13 18:01:22 I did using aplay May 13 18:01:29 probably default is defines as a stack including plug plugin as topmost May 13 18:01:32 but not using the plugin May 13 18:04:08 ok I'll try, thanks a lot May 13 18:04:15 now that's kinda friggin strange - did you open it in aplay with rate=8000 ? May 13 18:04:28 I'll re-explain May 13 18:04:33 I pasted aplay as a reference May 13 18:04:36 maybe I got that wrong May 13 18:04:40 for asking the question May 13 18:04:41 morphis: amazing, t'works May 13 18:04:49 mickeyl: great :) May 13 18:04:51 but I'm not using aplay at all for the cmtspeech plugin May 13 18:04:58 freesmartphone.org: 03mickey 07aurora * r6a9e99fabea3 10/aurora/ (5 files in 4 dirs): aurora: change the way we make the middleware visible in QML May 13 18:05:09 playya: you ever tried the strace-msm-parse script with webos 2.1 til dumps? May 13 18:05:14 morphis, float in gps messages? May 13 18:05:20 nope May 13 18:05:29 I'm still on 1.4.x :P May 13 18:05:38 GNUtoo|laptop: you need to open alsa device similar to or even "default", with a rate of 8000 May 13 18:05:50 angelox_123: ok, key added, please retry the whole thign :) May 13 18:05:52 http://www.pastie.org/private/rat39v2zxx3zmkregweyeq //vala lib I use May 13 18:06:07 alsa plugin named plug will convert to N900 standard sample rate of 48000 May 13 18:06:38 playya: yes May 13 18:06:41 playya: ok May 13 18:06:45 the code I use: http://www.pastie.org/private/uls0g235j52cx7ajaqxeng May 13 18:06:48 ok May 13 18:06:49 GNUtoo|laptop: sorry NFC bout vala May 13 18:06:53 playya: are there the gps numbers in the webos 1.4.5 logs? May 13 18:07:11 in webOS 2.1 they print out the latitude and longitude May 13 18:07:11 mickeyl: thanks,cloning worked,let's try a new branch :) May 13 18:07:22 excellent May 13 18:08:09 playya: if there is anything I can help you, please ping or write me a mail May 13 18:08:26 mickeyl: what are the next steps for aurora? May 13 18:08:27 morphis, http://pastebin.com/ZW4vfH2U May 13 18:08:39 hex2float May 13 18:09:02 just use the hex output aus parameters May 13 18:09:26 the hex output from the whole message? May 13 18:10:00 the part where you expect the data May 13 18:10:10 it iterates over the whole data May 13 18:10:20 how long should it be May 13 18:10:21 ? May 13 18:10:29 morphis: looking at the user stories, someone needs to tackle the big fat voice call user story. this involves a) in-call screen, b) incoming/outgoing call overlays, c) middleware May 13 18:10:32 4+ hex values May 13 18:10:35 like echo "45 33 23 42" | hex2float May 13 18:10:38 ok May 13 18:10:40 no May 13 18:10:42 plus logic to change between 'em May 13 18:10:48 hex2float 45 33 23 42 May 13 18:10:52 mickeyl: yes, we should do that together May 13 18:10:58 sorry. need to leave May 13 18:11:03 mickeyl: the logic to change between them is there May 13 18:11:03 bye May 13 18:11:05 playya: ok May 13 18:11:06 bye May 13 18:11:16 mickeyl: thanks,worked :) let's code! May 13 18:11:18 we don't have overlay screens yet, do we? May 13 18:11:24 angelox_123: great. welcome on board :) May 13 18:11:30 bye playya May 13 18:11:33 if you use 5 values you get 2 possible float values May 13 18:11:35 hehe,thanks May 13 18:12:13 playya: ah ok May 13 18:12:20 playya: little endian or big endian? May 13 18:12:32 mickeyl: you mean modal dialogs? May 13 18:12:42 iirc both May 13 18:12:49 ok May 13 18:12:56 morphis: something like that.. semitransparent overlay windows that don't cover the whole screen May 13 18:13:14 bye May 13 18:13:44 GNUtoo|laptop: your first pastebin looks exactly what I'd expect it to look like, to playback a rate=8000 mono S16_LE stream to the N900 audio card which is stereo rate=48000, S32_LE :-O May 13 18:13:47 morphis: i'll start with the necessary glue code in CellularNetworkAgent, so that the QML components can initiate/reject/accept/drop a call. then we need to agree on a 'call status' property which triggers the necessary state changes in the qml stuff May 13 18:13:59 ok May 13 18:14:15 I'll try harder May 13 18:14:23 because for now I've a robot voice May 13 18:14:32 mickeyl: that should not be a problem, meego-ux-components already has that May 13 18:14:37 not in aplay May 13 18:14:38 mickeyl: I will import it May 13 18:14:42 GNUtoo|laptop: except for the name of your softvol slider that's definitely odd by "Media Volume" May 13 18:14:43 hmm May 13 18:14:44 mickeyl: for what do you want it? May 13 18:14:57 incoming call dialog May 13 18:15:06 no? May 13 18:15:14 foobar is calling [accept | reject] May 13 18:15:22 ah ok May 13 18:15:27 GNUtoo|laptop: (robot voice) even via aplay? May 13 18:15:32 should the dialog in the middle of the screen? May 13 18:15:35 no May 13 18:15:42 only in my plugin May 13 18:15:59 hmm, chck size and number of your buffers May 13 18:16:12 also thresholds and other params May 13 18:16:40 morphis: yep May 13 18:16:45 mickeyl: ok May 13 18:16:46 I tought about having a wrong period size May 13 18:16:48 I'll check May 13 18:16:50 mickeyl: I will do some example for that May 13 18:17:03 if possible, semitransparent, only covering like 7% of the whole screen or so May 13 18:17:04 err May 13 18:17:05 70% May 13 18:17:27 ok May 13 18:17:38 mickeyl: then we should add both tasks to the wiki page May 13 18:17:46 GNUtoo|laptop: there's a relatively simple call to alsa-lib, to create debug printouts to stderr(?) similar to what aplay -v does May 13 18:17:49 right May 13 18:17:50 mickeyl: btw. whats about usage handling? May 13 18:17:55 ok May 13 18:18:09 and if we have both the next steps for a working dialer should very fast done May 13 18:18:16 mickeyl: btw. we need access to fsoaudiod too May 13 18:18:37 GNUtoo|laptop: afaik it's more or less a oneliner May 13 18:18:45 morphis: usage handling will be covered by the respective agents. i don't think we need a seperate agent for that. the network agent will request the resource when it is first instanciated May 13 18:18:50 (for now) May 13 18:19:01 btw it seems that DTMF work May 13 18:19:05 I don't know why tough May 13 18:19:24 freesmartphone.org: 03angelo 07angelox/testing * r0c8d1cc3983f 10aurora/aurora/components/app-settings/ (Application.qml Hub.qml qmldir): aurora: first implementation of settings app May 13 18:19:53 yay May 13 18:20:14 mickeyl: ok, I just saw it anywhere May 13 18:21:24 angelox_123: looks good :) May 13 18:21:32 freesmartphone.org: 03mickey 07aurora * r1954a528c15a 10/aurora/ (aurora/extensions/agents.py components/common/Dialpad.qml): aurora: CellularNetworkAgent: start w/ Call API May 13 18:21:33 btw. we should make some style guideline for our qml code May 13 18:21:39 yes, that too May 13 18:21:47 morphis: thanks :) May 13 18:22:11 GNUtoo|laptop: you know you can pipe raw audio data to aplay's stdin? May 13 18:22:25 I know May 13 18:22:32 but mickeyl won't accept it May 13 18:22:38 :-D May 13 18:23:38 mickeyl: we need a wiki account for angelox_123, can you do something to archive that? May 13 18:23:48 well, it doesn't work too nice also, regarding delay May 13 18:24:21 morphis: i can open registration again... May 13 18:24:23 mickeyl: ah I took a look at your last commit May 13 18:24:29 mickeyl: hm May 13 18:24:37 we might get spammed to death again May 13 18:24:39 but so be it.. May 13 18:24:40 but only for some minutes, so angelox_123 can pick a account May 13 18:24:58 mickeyl: you should not call the agent in the dialpad directly May 13 18:25:15 ok, should be enabled again May 13 18:25:15 mickeyl: we should have a dial() signal within the dialpad widget May 13 18:25:21 why not? May 13 18:25:28 have a nice weekend folks May 13 18:25:34 you too, DocScrutinizer May 13 18:25:34 is xrandr rotating slightly broken with SHR testing? May 13 18:25:46 as I want to restructure the dialpad to be even usable for pin-insert dialog May 13 18:25:53 losinggeneration: yes some say so May 13 18:26:09 mickeyl: created my account,thanks May 13 18:26:12 np May 13 18:26:20 ok, as long as I'm not alone that at least makes me feel a bit better JaMa|Off :P May 13 18:27:03 losinggeneration: in few minutes there will be 1.10.1.901 in shr-u, so you can try it there if you need rotation.. May 13 18:27:03 mickeyl: btw. what is our state regarding gta04? May 13 18:27:53 brb May 13 18:28:23 mrmoku: hardly anything done yet, then again, there shouldn't be much to do. OE needs a machine type and a kernel. FSO needs a modem abstraction and some device abstraction changes. the latter can only be started once working hardware is in our hands May 13 18:28:29 JaMa|Off: awesome, I may give it a try May 13 18:28:50 mickeyl: ok May 13 18:29:53 morphis: i think we want a seperate widget for the PIN entry anyways eventually, but for now i agree. feel free to use a signal instead. May 13 18:30:03 * mickeyl needs to log off for tonite May 13 18:30:17 i'll add to the task page then leave May 13 18:30:19 GNUtoo|laptop: watching your aplay -v pastebin, I wonder if it's wise to have softvol and dmix operate @ 48000/s S32_LE May 13 18:30:56 morphis, ^^^ May 13 18:31:01 if that'd work I'd suggest to have a forced rate conversation plugin between dmix and hw May 13 18:31:10 mickeyl: ok, then enjoy the night :) May 13 18:31:35 or at very least have the plug plugin lower in stack than the softvol May 13 18:32:47 freesmartphone.org: 03angelo 07angelox/testing * re280b7feb61b 10aurora/aurora/components/app-settings/Hub.qml: aurora: fix copyright May 13 18:33:22 * angelox_123 made mistake :\ May 13 18:33:34 added more tasks May 13 18:34:07 mickey|bbl: modal dialog works now May 13 18:34:20 angelox_123: feel free to merge you branch into master :) May 13 18:34:26 mickey|bbl: yeah, I was thinking FSO only May 13 18:34:30 actually modem only May 13 18:34:52 as gta04 probably will hit us when you won't have much time May 13 18:34:58 GNUtoo|laptop: I think multiplying 2ch S32_le by 0.n at 48000, that's quite a bit more of CPU raping than doing 1ch (@8000/s) S16_LE * 0.n May 13 18:35:29 what's 0.n ? May 13 18:35:40 mrmoku: modem should be relatively easy. last i heard it's a singleline with a QMI-like network interface May 13 18:35:43 but I understood May 13 18:35:50 a value between 0.0 and 1.0, depending on softvol slider May 13 18:36:09 mickey|bbl, can the gta04 modem be reflashed May 13 18:36:16 DocScrutinizer, ok May 13 18:36:19 GNUtoo|laptop: no idea May 13 18:36:43 what do we really know about gta04 after all? May 13 18:37:12 mickey|bbl: ok, all fine then :) May 13 18:38:18 I need to recompile the kenrel for xruns handling May 13 18:38:27 s/handling/debugging May 13 18:38:30 * DocScrutinizer wonders if mickey|bbl has some urgent driving task May 13 18:38:57 freesmartphone.org: 03mok 07cornucopia * ra8ef14eac4f3 10/fsogsmd/src/plugins/modem_nokia_isi/ (13 files): May 13 18:38:57 freesmartphone.org: fsogsmd: modem_nokia_isi: finish mediator split and filename consistency rework May 13 18:38:57 freesmartphone.org: Signed-off-by: Klaus Kurzmann May 13 18:40:36 GNUtoo|laptop: alsa buffer xrun? May 13 18:41:13 xrun == buffer underruns May 13 18:41:18 yeah May 13 18:41:49 under for playback, over* for record May 13 18:42:01 ok May 13 18:42:54 btw you know you should use plughw:0.0 for mic (for now) May 13 18:43:33 ok, good idea May 13 18:43:34 as hw:0.0 will give you r=48000, and default seems borked completely May 13 18:43:36 but I'm not there yet May 13 18:43:48 just metioning in advance May 13 18:45:06 you could try to use plughw instead of hw for dmix slave in playback May 13 18:45:22 regarding above cpu rape topic May 13 18:45:52 but might be dmix only accepts hw slaves May 13 18:45:56 dunno May 13 18:46:11 would consider that a bug, but anyway. Test it May 13 18:48:50 nah, actually that's nonsense, as you can't change the dmix instance on the fly. The idea is the dmix instance is the same for all apps using audio out May 13 18:49:00 so it must run @ 48000 May 13 18:49:48 DocScrutinizer: haven't you been struggling with cell broadcasts under maemo? May 13 18:49:57 at least the 'lowest' dmix plugin's instance May 13 18:50:06 yeah, indeed May 13 18:50:14 mrmoku: ^^ May 13 18:50:32 freesmartphone.org: 03morphis 07aurora * r70b9386a1839 10/aurora/ (8 files in 5 dirs): aurora: import modal dialog from meego-ux-components and add example to main screen May 13 18:50:35 there's obviously a bug in some closedsource shit lib May 13 18:50:53 resulting in meaningless printouts in syslog May 13 18:51:13 DocScrutinizer: ok, just asking because I stumbled over it in the docs :) May 13 18:53:45 I'm lost with all theses plug May 13 18:54:04 pcm.open("plug:dmix"); //robot voice but no buffer underrun it seems May 13 18:54:49 i'm back May 13 18:54:58 If I remember well plughw:0.0 does -EPIPE that is to say buffer underrun May 13 18:56:18 " angelox_123: feel free to merge you branch into master :)" Thanks morphis,but i want to do things first in my branch,because if i make any error,i can fix without problems and without any bother to you... May 13 18:56:32 angelox_123: ok May 13 18:56:57 GNUtoo|laptop: alsa is a simple stack of plugins - alas they idiotically named one of them "plug" May 13 18:56:58 but you wont bother us :) May 13 18:57:21 work with master has the effect that we can fix things together very quickly May 13 18:57:40 and six eyes see more than two :) May 13 18:57:44 GNUtoo|laptop: basically plughw is just a "plug" plugin with slave "hw" May 13 18:57:53 ah ok May 13 18:58:06 haha :) so i'll merge it soon,let me finish some changes and i'll merge,thanks May 13 18:58:07 GNUtoo|laptop: you could as well use plug:"hw:0.0" May 13 18:59:55 in this notation "plug" is the name of the device (aka plugin) you access from your app, while the :"hw:0.0" part actually is a parameter to "plug" plugin May 13 19:00:23 as ":0.0" is a parameter to the "hw" plugin May 13 19:02:02 think of it as plug(hw(0, 0)) May 13 19:03:28 plughw(int card, int dev) { plug(hw(card, dev)) }; May 13 19:03:35 freesmartphone.org: 03angelo 07angelox/testing * r8e9c6db129db 10aurora/aurora/aurora/main.qml: aurora: add use/or/no settings app May 13 19:03:46 I understood May 13 19:04:49 fine, bbl May 13 19:04:52 o/ May 13 19:05:45 freesmartphone.org: 03angelo 07angelox/testing * rc4790cdf3bb2 10aurora/aurora/components/app-settings/Application.qml: aurora: add comments,how-to-add-options and fix variable names May 13 19:05:57 now,merging... May 13 19:09:18 freesmartphone.org: 03angelo 07aurora * re7bbec8c84fb 10/aurora/ (10 files in 6 dirs): Merge branch 'master' of git.freesmartphone.org:aurora May 13 19:23:10 freesmartphone.org: 03morphis 07aurora * rbd14b79141fa 10/aurora/ (5 files in 4 dirs): aurora: bring navigation bar back to application screen May 13 19:23:11 freesmartphone.org: 03morphis 07aurora * rb5349de70fc6 10/aurora/ (4 files in 2 dirs): May 13 19:23:11 freesmartphone.org: Merge branch 'master' of ssh://git.freesmartphone.org/aurora May 13 19:23:11 freesmartphone.org: Conflicts: May 13 19:23:11 freesmartphone.org: aurora/components/app-settings/Application.qml May 13 19:23:43 so I am off for today May 13 19:23:45 bye May 13 19:32:37 pcm.open("plug:hw:0"); //buffers underruns May 13 19:32:45 some stuff segfault May 13 19:32:50 and some have robot voice May 13 19:33:57 GNUtoo|laptop: hmm... I had that twice under maemo too... other side complaining about robot like voice May 13 19:34:17 once I had to recall... the other call got sorted out after some seconds May 13 19:34:24 no idea if that is related May 13 19:36:52 here it happens all the time May 13 19:36:58 maemo uses pulse tough May 13 19:58:42 freesmartphone.org: 03angelo 07aurora * rc1a2a7a9ca3a 10/aurora/components/ (5 files in 2 dirs): aurora: remove old-style app management on settings app and fix Makefile to install settings.app things May 13 20:06:11 mickey|bbl: someone already tried aurora on a phone? May 13 20:42:26 hello, I have a problem building shr-unstable-image, cups throws several QA issues... is there anybody who can help me ? May 13 20:45:22 freesmartphone.org: 03angelo 07aurora * r723a665d2c47 10/aurora/components/app-settings/SettingsPage.qml: aurora: add the first *sketch* to open configuration pages on Settings App May 13 20:50:28 I've found an error in my code May 13 20:50:32 I want to fix it May 13 20:50:34 alsa.vala:473.3-473.15: error: Pointer arithmetic not supported for `void*' May 13 20:50:35 buffer += err; May 13 20:50:48 mickey|bbl, mrmoku any idea? May 13 21:31:25 mrmoku, mickey|bbl are you there? May 13 21:46:18 mickey|bbl: could you help me to add a pagechange function? May 13 21:48:47 GNUtoo|laptop: Do you understand about the PageChange system on QML on Aurora? May 13 21:49:01 i'm very confused.. May 13 21:49:04 no May 13 21:49:10 I don't even know qml May 13 21:49:12 nor QT May 13 21:49:26 hmm,ok thanks.. May 13 21:49:34 I learned edje tough May 13 21:49:40 but I didn't practice yet May 13 21:50:06 i don't know a bit of efl libraries... May 13 21:59:32 i don't know a bit of efl libraries... May 13 21:59:35 ops sorry May 13 22:13:37 bye May 13 23:57:07 freesmartphone.org: 03angelo 07aurora * r74056d809574 10/aurora/components/app-settings/SettingsPage.qml: aurora: added function pushPage(almost working) on Settings App May 14 00:07:28 * angelox is going to be a nervous man :\ May 14 00:20:51 good night everyone **** ENDING LOGGING AT Sat May 14 02:59:58 2011