**** BEGIN LOGGING AT Tue Dec 27 02:59:56 2011 Dec 27 05:10:18 pespin: sorry, Im mostly offline. on holiday till 5th jan Dec 27 06:52:12 my freerunner keeps booting QtMoko instead of the now installed Debian ( http://wiki.debian.org/DebianOnFreeRunner )… Qi is installed and /boot of the debian install looks like this: http://paste.kde.org/178100/ Dec 27 06:52:33 does anyone know what's missing for Qi to boot from SD? it keeps booting from flash… Dec 27 07:04:01 increasing the delay to 5 didn't help ;( Dec 27 07:04:56 meh, sorry... didn't realise I'm on -cdevel... will ask in #openmoko again, sorry for the noise ;) Dec 27 08:08:57 SHR: 03Martin.Jansa 07shr-chroot * rdab81a1e92c7 10/ (333 files in 44 dirs): system upgrade Dec 27 08:13:06 eliasp: changing rootdelay won't help if it doesn't try to boot it, but /boot layout looks ok (only /boot/uImage-GTA02.bin is important), where did you get your Qi? Dec 27 08:14:49 JaMa: using qi-v35.udfu which I needed to properly boot QtMoko which I have running on flash Dec 27 08:16:20 * JaMa has no idea what's in -v35.udfu Dec 27 08:18:23 ;) Dec 27 08:18:46 trying now the latest Hackable1 image which also uses DebianOnFreerunner Dec 27 08:19:02 try qi from SHR :) Dec 27 08:21:52 JaMa: I did, but qi from SHR made it impossible to boot QtMoko from flash ... ;) Dec 27 08:22:09 will give it a try later in case Hackable1 doesn't work Dec 27 08:22:31 * eliasp starts to think about putting Funtoo on the GTA02 :) Dec 27 10:54:16 JaMa, hi Dec 27 10:54:42 JaMa, about switching to 3.2 neil brown said: Dec 27 10:54:44 Yes... that's a bit premature. The 3.x code really isn't ready. Dec 27 10:55:13 you mean for gta04 right? Dec 27 11:53:12 yes Dec 27 12:09:57 ha Dec 27 12:27:40 JaMa: hello, i added a shr-core-collect-artefacts job to jenkins and added shr-core-n900-shr-image as dependency trigger and switched off collect artefacts in shr-core-n900-shr-image, so artefacts are collected by one job automatically, if you like it we can change the other jobs too. Dec 27 12:29:31 nschle85: fine with me.. al shr-core-branches projects have collectin artefacts already disabled (as they are available in workspace directly anyway Dec 27 12:30:33 JaMa: but if workspace is cleaned they are lost Dec 27 12:30:54 ok, ill change shr-core projects Dec 27 12:31:57 if the feed is still there then recreate new images is fast enough Dec 27 12:38:15 JaMa: have you spoken with GNUtoo: about GTA04 kernel update to 3.2 and broken alsa (i have not read the history yet) ? Dec 27 12:42:01 yes he said something here, but I don't think I'm right person to talk about it, I don't have gta04 and I wasn't involved with that switch Dec 27 12:42:50 JaMa: i thought you have an idea what can be done to help GNUtoo: Dec 27 12:44:40 afaik slyon and mrmoku are using 3.2, don't know if they had to switch to 3.2 because they are working on something which depends on something from 3.2 .. so cannot say if switching back to help GNUtoo will break mrmoku's any slyon's work or not Dec 27 12:48:52 Project shr-core-nokia900-shr-image build #27: SUCCESS in 26 min: http://norman-schleicher.de/jenkins/job/shr-core-nokia900-shr-image/27/ Dec 27 12:50:10 JaMa: ok i understand Dec 27 12:58:35 heyho Dec 27 12:58:49 hey morphis! Dec 27 12:59:16 morphis: angelox|laptop: hello :-) Dec 27 12:59:32 nschle85: hey! :D Dec 27 13:09:32 JaMa: have you seen the shr-core workspace ? there is only the image for n900 no gta02 image Dec 27 13:10:13 morphis: do you want crespo aurora image with qt-4.8? :) Dec 27 13:10:50 nschle85: yes because of cleanup after building them Dec 27 13:11:21 JaMa: do you have one ready? Dec 27 13:11:28 morphis: yes Dec 27 13:11:37 JaMa: then I want it :) Dec 27 13:13:02 JaMa: btw. how does the jenkins integration work? Dec 27 13:13:08 due to a extra plugin? Dec 27 13:14:35 just executes shell scripts like I do manually on shr buildhost :) Dec 27 13:14:53 ok Dec 27 13:15:26 JaMa: is it necessary between different machine target builds ? Dec 27 13:16:13 nschle85: what? cleanup? not really but in order to store only right arefacts it would be better (or fix pattern for artefacts) Dec 27 13:16:57 nschle85: but if build is incomplete/failing then -cleanup could be dangerous as it wipes tmpdir Dec 27 13:17:36 nschle85: that's why I would run -cleanup only manually and only when all builds are shining ;) Dec 27 13:18:03 angelox|laptop: I am still not fine with the settings app for aurora Dec 27 13:18:17 I took a short look in the last week Dec 27 13:18:59 angelox|laptop: for example you have the switch for the different config types more than one time which is unnecessary Dec 27 13:19:40 and we don't need different style components just for each configuration section Dec 27 13:19:42 JaMa: now all artefacts are stored in the same directory, same like on bearstech build host i think Dec 27 13:20:51 yes and current pattern does copy them all even if it's for different machine Dec 27 13:21:38 morphis: hmm, i don't get it, each ListElement has just one line of "type: "ConfigType.STUFF" " Dec 27 13:22:17 JaMa: so its what we (i) want :-) Dec 27 13:22:45 is it? :) then fine Dec 27 13:23:30 so i have to switch off the computer, my son waked up.... so he will occupy the keyboard Dec 27 13:24:05 angelox|laptop: look at openType() method Dec 27 13:24:14 in each subdirectory Dec 27 13:24:25 in the *Style.qml files Dec 27 13:24:49 angelox|laptop: we need one general style component which is used on every settings page Dec 27 13:24:57 not one for each settings page Dec 27 13:25:59 morphis: ah ok,that is an mistake made by me, since each *Style.qml file has the same content Dec 27 13:26:11 yes Dec 27 13:26:24 so we don't need a subdirectory for each page too Dec 27 13:26:35 put them all in the root directory of the settings app Dec 27 13:26:46 bye for now, bbl Dec 27 13:26:54 morphis: ok, i'll do it Dec 27 13:29:22 angelox|laptop: ok great Dec 27 13:33:20 JaMa, it seems the genlist bug is fixed with latest elm and updating elm theme (there were some genlist theme changes so themes need to be updated) Dec 27 13:38:11 pespin: you mean latest in staging feeds or latest rev in EFL repo? Dec 27 13:38:24 JaMa, I mean in my netbook ;) Dec 27 13:38:46 I asked yesterday in #edevelop and they told me to update detour-elm theme which I'm using, and it's fixed now Dec 27 13:38:49 pespin: http://git.shr-project.org/git/?p=libphone-ui-shr.git;a=commit;h=86005ba623e2f42d0e2f0dd213577c9e871ed939 http://git.shr-project.org/git/?p=libphone-ui-shr.git;a=commit;h=09bf3a30db85fe0a7a5f135bd0bbc199fdcc5150 are already in latest feed Dec 27 13:39:45 by fixed I mean at least elementay_test is working now in my netbook ;) Dec 27 13:41:08 pespin: hmm right I forgot to fix default SHR themes in shr-themes.git Dec 27 13:41:19 I'm yet to start using staging images, but I'm going away in about 1 hour and I need it as music player, so I'll upgrade during next days and try everything :) Dec 27 13:41:23 I did it only for apps which were using own themes Dec 27 13:41:49 Project shr-core-om-gta02-shr-image build #58: SUCCESS in 26 min: http://norman-schleicher.de/jenkins/job/shr-core-om-gta02-shr-image/58/ Dec 27 13:42:15 * pespin going to buy some bread to have lunch, brb Dec 27 13:47:25 SHR: 03Martin.Jansa 07shr-themes * r61d667b41406 10/elementary/ (7 files in 5 dirs): themes: update .edc files with genlist/gengrid edc changes (s/data.item: labels/data.item: texts/g) Dec 27 13:47:26 SHR: 03Martin.Jansa 07shr-themes * r68c1ef1096f4 10/elementary/ (7 files in 5 dirs): themes: update .edc files with genlist/gengrid edc changes (s/data.item: icons/data.item: contents/g) Dec 27 13:47:26 SHR: 03Martin.Jansa 07shr-themes * rbbe2445c29cd 10/elementary/elementary-theme-neo/neo.edj: elementary-theme-neo: drop binary .edj file Dec 27 13:54:37 SHR: 03Martin.Jansa 07shr-themes * r9b2976008167 10/phoneui-shr/ (12 files in 4 dirs): phoneui-shr-themes: update .edc files with genlist/gengrid edc changes (s/data.item: icons/data.item: contents/g) Dec 27 13:54:40 SHR: 03Martin.Jansa 07shr-themes * rf8a79804e8e5 10/phoneui-shr/ (16 files in 4 dirs): phoneui-shr-themes: update .edc files with genlist/gengrid edc changes (s/data.item: labels/data.item: texts/g) Dec 27 13:54:41 SHR: 03Martin.Jansa 07shr-themes * rff5cde415de9 10/phoneui-shr/phoneui-shr-theme-niebiee/contacts.edc~: phoneui-shr-theme-niebiee: remove temporary file Dec 27 13:56:09 SHR: 03Martin.Jansa 07meta-smartphone * r3d57b0e73dde 10/meta-shr/recipes-shr/shr/ (6 files): elementary-theme: bump SRCREVs to adapt to new elm API Dec 27 13:56:11 SHR: 03Martin.Jansa 07meta-smartphone * r24f04fd51f23 10/meta-shr/recipes-shr/shr/ (4 files): phone-ui-shr-theme-*: bump SRCREVs to adapt to new elm API Dec 27 13:56:18 lets see if it fixes shr_elm_softkey too :) Dec 27 14:09:26 SHR: 03Martin.Jansa 07shr-themes * r2bd77b3184ac 10/elementary/elementary-theme-gry/gry.edc: elementary-theme-gry: add missing elm/entry/anchor/default group Dec 27 14:09:32 SHR: 03Martin.Jansa 07meta-smartphone * r368a90f54c74 10/meta-shr/recipes-shr/shr/elementary-theme-gry_git.bb: elementary-theme-gry: bump SRCREV to fix missing group Dec 27 14:18:29 JaMa, I've sound on 3.2 now Dec 27 14:18:37 JaMa, but not for the modem Dec 27 14:18:48 I just followed the mail from neil Dec 27 14:20:16 and I don't think reverting is a good idea Dec 27 14:20:20 but not breaking was better Dec 27 14:21:10 good, thanks for update Dec 27 14:21:32 the how to get sound thread is here: Dec 27 14:21:38 http://lists.goldelico.com/pipermail/gta04-owner/2011-December/001069.html Dec 27 15:39:41 freesmartphone.org: 03barklome 07settings-rework * rb6d53a7db088 10aurora/aurora-daemon/ (24 files in 6 dirs): aurora-daemon: settings-app: clean up un-used delegates Dec 27 19:38:56 I'm about to test 013. unfortunatly after reboot there is no network connection possible (no device on notebook). Dec 27 19:39:22 I also have to restart x-server all the time to have the startup/desktop icons Dec 27 19:40:02 So I have no idea how to check why I don't have network connection without network connection :( Dec 27 19:40:11 any ideas? Dec 27 19:42:49 ege, hmmm Dec 27 19:42:49 ege: have you tried another staging image before? Dec 27 19:43:14 I did an opkg upgrade from shr-core Dec 27 19:43:19 ok Dec 27 19:43:29 and there networking worked Dec 27 19:43:45 but desktop icons always came only after restart of x Dec 27 19:44:04 you can toggle the split desktop thing Dec 27 19:44:06 which is easy if you have network :) Dec 27 19:44:09 then they will appear Dec 27 19:44:17 yeah :) Dec 27 19:44:21 did the trick :) Dec 27 19:44:53 but no idea about network :) Dec 27 19:45:24 on fr network seams to be present Dec 27 19:45:38 I'll have a look at that now i can start terminal :) Dec 27 19:47:47 hmm restarting usb0 on FR also doesn't help Dec 27 19:47:52 ege: maybe you have to ifdown /up the usb on host after rebooting freerunner Dec 27 19:47:55 Is there something else I can check? Dec 27 19:48:08 ifconfig -a (host Dec 27 19:48:14 nschle85, tried that already Dec 27 19:48:50 how did you configured networking ? (networkmanager etc..) Dec 27 19:48:55 when booting the device shows up, 2 seconds later it disappears Dec 27 19:48:59 Dec 27 20:23:12 mini kernel: [66681.912079] usb 3-1: USB disconnect, address 28 Dec 27 19:48:59 Dec 27 20:23:12 mini kernel: [66681.913774] eth2: unregister 'cdc_ether' usb-0000:00:1d.1-1, CDC Ethernet Device Dec 27 19:49:25 debian udev rule and /etc/networking/interface configuration Dec 27 19:50:03 nschle85, ifconfig -a does not show the interface. See kernel messages Dec 27 19:50:31 reconnecting usb also doesn't help Dec 27 19:50:42 ah i think udev connects the device as eth2 Dec 27 19:50:59 hmm it renames: Dec 27 19:51:10 udev[26449]: renamed network interface eth1 to eth2 Dec 27 19:51:21 ege yup Dec 27 19:51:58 I've two FR and therefor more than one config Dec 27 19:52:06 eth2 is configured Dec 27 19:52:19 I really lose the device Dec 27 19:52:37 It worked before I rebooted FR after flashing 013 Dec 27 19:54:38 so remove the rules in /etc/udev/rules.d/70-persistent-net.rules Dec 27 19:54:49 nschle85, why? Dec 27 19:55:38 because the mac adress seemed to cange , can you pasebin the file please ? Dec 27 19:57:09 I have a second FR and so I have different macs and that one always get's eth2 IIRC Dec 27 19:57:42 so delete the rule for eth1 should help Dec 27 19:57:57 ok, I'll try that Dec 27 19:58:53 rebooting... Dec 27 19:59:29 hmm, shutdown also seems to not work :( Dec 27 19:59:49 how old is your image ? Dec 27 20:00:11 yesterday? or the day before yesterdy Dec 27 20:00:18 +a Dec 27 20:00:19 selfmade ? Dec 27 20:00:32 no from build.shr-project.org Dec 27 20:01:15 shr-core ? Dec 27 20:01:26 sorry, shr-core-staging 013 Dec 27 20:02:55 ege: shutdown should work :-( Dec 27 20:03:11 didn't for me only forcing through power button worked Dec 27 20:03:52 ege: what about usb networkig now ? Dec 27 20:04:02 no, same issue Dec 27 20:04:04 Dec 27 20:56:36 mini kernel: [68686.175229] cdc_subset: probe of 3-1:1.0 failed with error -22 Dec 27 20:04:05 Dec 27 20:56:36 mini kernel: [68686.180345] eth1: register 'cdc_ether' at usb-0000:00:1d.1-1, CDC Ethernet Device, 00:1f:11:01:3d:9a Dec 27 20:04:05 Dec 27 20:56:36 mini kernel: [68686.209802] udev[27338]: renamed network interface eth1 to eth2 Dec 27 20:04:05 Dec 27 20:56:53 mini kernel: [68702.864110] usb 3-1: USB disconnect, address 32 Dec 27 20:04:05 Dec 27 20:56:53 mini kernel: [68702.865703] eth2: unregister 'cdc_ether' usb-0000:00:1d.1-1, CDC Ethernet Device Dec 27 20:04:19 oups Dec 27 20:04:23 why it renamed Dec 27 20:04:41 aahh commented out rule for eth1 instead of eth2 Dec 27 20:05:26 ege: eth1 was correct Dec 27 20:06:06 ege: i think your udev-rule has a problem detecting the mac Dec 27 20:06:25 nschle85, no, it works for the second FR Dec 27 20:06:52 If I connect that one (was eth1) it now creates a new rule for eth1 with the correct mac Dec 27 20:07:14 connecting the 013-Image one I doesn't show up any usb-connection Dec 27 20:07:27 I try switching to hostmode now Dec 27 20:07:31 have you read this ? http://www.debianhelp.co.uk/udev.htm Dec 27 20:08:32 which adresses are you using ? Dec 27 20:08:50 192.168.7.1/2 ?? Dec 27 20:09:13 when I open "Connectivity" from settings I get "USB settings Couldn't connect to FSO" Dec 27 20:09:25 no, I use 19.168.50.202 Dec 27 20:09:49 I had address conflicts using 0.202 and changed to 50.202 Dec 27 20:10:16 and freerunner is changed also ? Dec 27 20:10:45 yes, the network interface is not present. No problem with settings here. Dec 27 20:10:59 the new default adresses have changed in shr-core Dec 27 20:11:11 If I connect the other one i get a lot of kernel messages, with the flashed one only when booting, then it disapears. Dec 27 20:11:14 so you have no conflict in future Dec 27 20:11:21 I saw that, yes Dec 27 20:11:38 I have a setup script for my settings, so it changes addresses for me Dec 27 20:12:08 yes, seen that Dec 27 20:12:16 and using no udev ? only interfaces config ? as test ? Dec 27 20:15:33 I try reflashing and not changing ips first. Dec 27 20:15:34 ege: http://web.archiveorange.com/archive/v/qyfArMR9UjARhkmBrHYP#VRdFItIMaigmFBR read the last reply please, Dec 27 20:17:01 ege: and check your mac adress and udev rule Dec 27 20:17:31 mac and udev is fine. When FR boots everything including IP gets set correctly Dec 27 20:17:41 but then whole usb-device disappears Dec 27 20:18:00 It's like you connect a dead usb-stick or only the cable Dec 27 20:18:58 ege: puh ... i have ubuntu, with different problems so i cannot 100% reproduce your problem Dec 27 20:19:29 where can i change usb host/client-mode in FR? Dec 27 20:19:52 should be in connectivity?! Dec 27 20:20:38 OK, found a problem on FR Dec 27 20:21:08 In Connectivity module of settings I only find couldn't connect to FSO in wifi, gprs, usb-section Dec 27 20:21:20 bluetooth also Dec 27 20:21:27 ege: it's host/device Dec 27 20:21:45 lindi-, ok :) Dec 27 20:22:31 do you need some logs before I try to reflash? Dec 27 20:27:57 ege: no Dec 27 20:28:19 ok, reflashing... Dec 27 20:28:39 ege but default settings on fr always works, mostly the host is the problem Dec 27 20:35:56 I'm with you nschle85 if the interface doesn't show up or gets wrong ip Dec 27 20:36:22 ege: lsmod | grep cdc_ether Dec 27 20:36:29 but it disappears when boot process of FR has finished Dec 27 20:36:43 too late, flashing already :) Dec 27 20:36:56 ahhh, try connecting after fr has booted Dec 27 20:37:13 no i meant on host Dec 27 20:38:09 cdc_acm 12622 0 Dec 27 20:38:09 cdc_ether 2633 0 Dec 27 20:38:09 cdc_subset 1593 0 Dec 27 20:38:09 usbnet 9527 2 cdc_ether,cdc_subset Dec 27 20:38:36 ege: looks good Dec 27 20:38:43 it also works with second FR, host shouldn't be the problem Dec 27 20:39:00 but secon fr has different mac i think Dec 27 20:39:19 so eth1-> eth2 Dec 27 20:39:20 yes and also get's another ethernet interface Dec 27 20:39:33 its because udev rules Dec 27 20:39:45 but nevertheless the interface should show up when doing ifconfig -a Dec 27 20:40:06 and if i connect FR I should see kernel messages detecting usb Dec 27 20:40:12 yes Dec 27 20:40:20 what says udev log ? Dec 27 20:40:32 but I only get them when I boot the FR and not after reconnecting. Dec 27 20:40:56 I haven't got a separated udev log Dec 27 20:41:01 all in messages Dec 27 20:41:36 make something like cat /var/log/udev | grep usb Dec 27 20:41:37 If I connect the FR in uboot menu I get kernel messages, but not when it is booted.... Dec 27 20:41:48 no udev log Dec 27 20:42:04 no log ? Dec 27 20:42:21 no, udev messages are in /var/log/messages Dec 27 20:43:02 and in /var/log/syslog ? Dec 27 20:44:31 yes, nearly the udev messages. Dec 27 20:45:03 please show me your udev rule Dec 27 20:45:33 # USB device 0x:0x (cdc_ether) Dec 27 20:45:34 SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1f:11:01:3d:9a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" Dec 27 20:45:59 but it has nothing to do with udev. Dec 27 20:46:38 ifconfig -a Dec 27 20:47:17 no interface 'cause FR is reflashing Dec 27 20:47:26 but I have a usb-device now: Dec 27 20:47:41 Bus 003 Device 041: ID 1d50:5119 OpenMoko, Inc. GTA01/GTA02 U-Boot Bootloader Dec 27 20:48:52 ege that is the u-boot because you are booting the device connected you should not do Dec 27 20:49:34 no, flashing Dec 27 20:49:56 yes, its in u-boot flash mode Dec 27 20:50:00 what's the problem when booting connected FR Dec 27 20:50:23 i think udev applies its configuration to the wrong usb device Dec 27 20:50:33 after booting the usb device changes Dec 27 20:50:55 OK, I try that when I have same problem after reflashing Dec 27 20:51:09 http://wiki.openmoko.org/wiki/USB_Product_IDs Dec 27 20:52:23 interesting Dec 27 20:52:39 I never had problems with that :) Dec 27 20:52:45 Neo1973/FreeRunner u-boot usbtty CDC ACM Mode Dec 27 20:54:13 how can I change language/ keyboard layout in shr on n900? Dec 27 20:54:48 ilold9, first install new keyboards with opkg list | grep and opkg install Dec 27 20:55:05 and then cycle trough the keyboards the usual way Dec 27 20:55:31 GNUtoo: ilold9do you mean the hardware keyboard ? Dec 27 20:56:39 ah right I forgott that there was a hardware keyboard, sorry Dec 27 20:56:50 the hardware keyboard: xorg.conf Dec 27 20:57:21 GNUtoo: ok, this needs network connection then, I asume. thanks, will try when wifi works.... oh, yeah meant hw-keyb. thanks. Dec 27 20:57:24 JaMa, hi is multi-machine build fixed, how do you workarround if now? Dec 27 20:57:43 ilold9, just edit xorg.conf then Dec 27 20:57:55 usbnet should be enough for that Dec 27 20:59:56 will do, xorg.conf. about usbnet, that I don't :-) I really don't like it, so I wait for wifi to work. Dec 27 21:02:28 what do you mean by wait Dec 27 21:02:33 it works if you scp the firmware Dec 27 21:02:40 or copy on microsd Dec 27 21:03:20 something else. the "notes" app is missing something critical. a open file dialog. Dec 27 21:03:37 bugreport then Dec 27 21:03:42 else it get forgetten Dec 27 21:04:33 ouch dialogs are misplaced in notes in om-gta04 Dec 27 21:05:31 GNUtoo, in core? in last stagging wifi doesn't work because of rfkill. also tried your echo 1 > state again but ifconfig wlan0 up still doesn't work and rfkill seams to block it. Dec 27 21:05:39 GNUtoo: ok changed keyboard layout, but german ÄÖÜ are displayed as ??? Dec 27 21:05:46 wht else is missing ? Dec 27 21:06:03 GNUtoo: any fonts ? Dec 27 21:06:28 ilold9, killall connmand Dec 27 21:06:49 nschle85, hmmm I've no idea, maybe some fonts or some utf8 things? Dec 27 21:08:07 ilold9, and retry Dec 27 21:08:30 it's a bug that I reported to mickeyl and I still didn't understand well how to fix it Dec 27 21:16:54 ok. new bug. seems killall connmand, echo 1 > state, ifconfig wlan0 up, iliwi works. the bug, iliwi doesn't show avaible networks. they are there, I can press a empty space and the following dialog shows a ssid. Dec 27 21:23:07 oh. and doesn't connnect. is stuck @ "connecting...". I think, thats when a password dialog should show up. Dec 27 21:25:02 GNUtoo: what issues are you talking about with multimachine builds? Dec 27 21:25:29 JaMa, if I build from scratch for gta04 everything is fine Dec 27 21:25:39 but as soon as I change machine within the same tmpdir.... Dec 27 21:25:47 I've build which fails not finding files Dec 27 21:25:56 for instance no such file or directory Dec 27 21:26:00 includes not found Dec 27 21:26:02 etc... Dec 27 21:26:06 using rm_work? Dec 27 21:26:19 rm_old_work Dec 27 21:27:35 I did 3 rebuilds from scratch today and it worked, but there are still weird issues around toolchain Dec 27 21:28:10 yes it's mostly toolchain related Dec 27 21:29:13 JaMa: ERROR: gst-plugins-ugly was skipped: because it may require a commercial license to ship in a product (listed in COMMERCIAL_LICENSE) Dec 27 21:29:45 which varibable i have to set ? Dec 27 21:30:02 nschle85, let me look Dec 27 21:30:19 COMMERCIAL_LICENSE = "0" Dec 27 21:30:29 in local.conf Dec 27 21:30:34 nschle85: it's in local.conf comment too Dec 27 21:30:55 ah I guess vagalume now pulls that to std image, right? Dec 27 21:30:57 JaMa: ups i see Dec 27 21:31:12 JaMa: 10 pints :-) Dec 27 21:31:13 so this should be set by default in our local.conf Dec 27 21:31:14 points Dec 27 21:32:37 SHR: 03Martin.Jansa 07shr-makefile * rcab4330007cf 10/conf/shr-core/local.conf: shr-core/local.conf: make COMMERCIAL_LICENSE empty by default Dec 27 21:33:27 staging 014 closing soon :) Dec 27 21:33:39 JaMa: yay! :) Dec 27 21:34:39 jake42: not so many goodies in it :/ Dec 27 21:35:50 JaMa: uh well at least its one more step Dec 27 21:35:59 does shr have alternative options to iliwi, i mean would wicd work? Dec 27 21:37:17 ilold9: iliwi works for me apart from the genlist issue and connman blocking rfkill (you cant see the ssids in the list) Dec 27 21:38:25 so now ill go to bed... tomorrow i have to go to Prague :-) Dec 27 21:38:39 :) Dec 27 21:39:34 bye :-) Dec 27 21:39:54 gnight Dec 27 21:51:03 nope. doesn't work for me. " WARNING: at net/wireless/core.c:643: wdev_cleanup_work+0x5c/0xf0 [cfg80211] ()". Dec 27 21:52:48 does someone knows how to use variant in dbus? Dec 27 21:52:56 like sv signature Dec 27 21:53:26 like that for instance: Dec 27 21:53:28 [METHOD] net.connman.Technology.SetProperty(s:arg_0, v:arg_1) -> () Dec 27 21:53:38 mickeyl, ping Dec 27 21:54:03 mickeyl, I think we need to have the possibility to have multiples plugin to handle one resource Dec 27 21:54:07 like wifi: Dec 27 21:54:10 * Ifconfig Dec 27 21:54:13 * rfkill Dec 27 21:54:16 * connman handling Dec 27 21:54:36 else I don't see how to integrate connman handling there Dec 27 21:54:45 or maybe fsodeviced<-> connman? Dec 27 21:56:33 how do other distros handle that? Dec 27 21:57:01 ilold9, no idea Dec 27 21:57:23 ilold9, basically I reported the bug to mickeyl(connmand issue with rfkill) Dec 27 21:57:31 he told me to make them work together Dec 27 21:57:38 and I'm not sure how Dec 27 21:57:53 I mean I'm stuck again at the same problem with variants in dbus Dec 27 21:58:02 so If I don't succeed there I won't go far Dec 27 22:00:07 sorry, i don't know anything that can help you there. I'd look how angstrom or meego handles networking, I think. Dec 27 22:01:13 yes but we depend on fso Dec 27 22:01:17 we cannot ditch that Dec 27 22:01:27 so at worse we remove connmand dependency and blacklist it Dec 27 22:01:53 * JaMa moving it from RDEPENDS to RSUGGESTS atm Dec 27 22:10:03 Project shr-core-om-gta02-shr-image build #59: SUCCESS in 28 min: http://norman-schleicher.de/jenkins/job/shr-core-om-gta02-shr-image/59/ Dec 27 22:15:33 does someone knows for variant? Dec 27 22:24:16 GNUtoo: http://dbus.freedesktop.org/doc/dbus-java/api/org/freedesktop/dbus/Variant.html sorry, thats probably not what you are looking for. Dec 27 22:25:27 SHR: 03Martin.Jansa 07meta-smartphone * r5e5f7507f4a3 10/meta-fso/recipes-freesmartphone/tasks/task-fso2-compliance.bb: task-fso2-compliance: move connman* from RDEPENDS to RSUGGESTS Dec 27 22:26:33 http://live.gnome.org/Vala/DBusServerSample Dec 27 22:27:52 ::= variant:: Dec 27 22:28:04 yes but I wonder about the syntax in: Dec 27 22:28:09 * python or Dec 27 22:28:13 http://man.he.net/man1/dbus-send Dec 27 22:28:14 * dbus-send Dec 27 22:28:18 * mdbus2 Dec 27 22:28:22 ok Dec 27 22:28:35 I tried that with dbus-send: Dec 27 22:28:48 dbus-send --system --dest=net.connman /net/connman/technology/bluetooth net.connman.Technology.SetProperty string:State variant:string:online Dec 27 22:29:04 mdbus2 says: Dec 27 22:29:05 [METHOD] net.connman.Technology.SetProperty(s:arg_0, v:arg_1) -> () Dec 27 22:31:07 maybe online isn't the type of value it expects? Dec 27 22:31:50 example: variant:int32:-8 Dec 27 22:31:54 ({'State': <'offline'>, 'Name': <'Bluetooth'>, 'Type': <'bluetooth'>, 'Tethering': },) Dec 27 22:32:19 that's the GetProperties Dec 27 22:34:53 thats the in example: dict:string:int32:"one",1,"two",2,"three",3 ... maybe string:State (uppercase S?) needs an int? Dec 27 22:35:27 ok will try Dec 27 22:36:48 hmmm it doesn't change Dec 27 22:37:10 it seem to exit without errors Dec 27 22:37:16 but I don't see a change Dec 27 22:37:25 maybe I'm doing it wrong Dec 27 22:38:09 in example there is also a opbject path Dec 27 22:38:19 Project shr-core-nokia900-shr-image build #28: SUCCESS in 28 min: http://norman-schleicher.de/jenkins/job/shr-core-nokia900-shr-image/28/ Dec 27 22:38:28 objpath:/org/freedesktop/sample/object/name Dec 27 22:38:57 after variant in dbus-send Dec 27 22:47:18 GNUtoo: arg_0 arg_1 could this actually mean, that it asks if argument is true or not true? Dec 27 22:47:50 no Dec 27 22:48:44 I don't think so Dec 27 22:48:47 but I've no idea Dec 27 22:48:55 dbus-send --system --dest=net.connman /net/connman/technology/bluetooth net.connman.Technology.SetProperty(string:State, variant:string:online) Dec 27 22:48:57 ok Dec 27 22:50:04 hmmm didn't change a thing Dec 27 22:51:25 ahh let me try something Dec 27 22:53:20 root@om-gta04:~# dbus-send --system --print-reply --type="method_call" --dest=net.connman /net/connman/technology/bluetooth net.connman.Technology.SetProperty string:State variant:string:online gives that: Dec 27 22:53:26 Error net.connman.Error.InvalidProperty: Invalid property Dec 27 22:53:34 note the print-reply Dec 27 22:53:46 dbus-send --system --dest=net.connman /net/connman/technology/bluetooth net.connman.Technology.SetProperty(s:State, v:string:online) Dec 27 22:54:26 or (s:State, v:online) Dec 27 22:55:46 maybe without "," Dec 27 22:56:30 Error org.freedesktop.DBus.Error.Disconnected: Connection was disconnected before a reply was received Dec 27 22:56:38 root@om-gta04:~# dbus-send --system --print-reply --type="method_call" --dest=net.connman /net/connman/technology/bluetooth "net.connman.Technology.SetProperty(s:State v:string:online)" Dec 27 22:56:42 same with the , Dec 27 22:56:52 or I'll try with \( Dec 27 22:57:43 and v is not a type Dec 27 22:57:49 according to the manual it's variant Dec 27 22:58:00 but anyway it still fails with \( and \) Dec 27 22:58:04 with and without the "," Dec 27 22:58:17 it fails like that: Dec 27 22:58:18 Error org.freedesktop.DBus.Error.Disconnected: Connection was disconnected before a reply was received Dec 27 22:59:22 maybe that was right and the reciver actually fails? Dec 27 22:59:33 I've really no idea Dec 27 23:00:20 is something blocking bluetooth from going into online state? Dec 27 23:01:16 hmmm Dec 27 23:01:19 root@om-gta04:~# dbus-send --system --print-reply --type="method_call" --dest=net.connman /net/connman/technology/bluetooth net.connman.Technology.SetProperty string:Tethering variant:boolean:true Dec 27 23:01:26 that does something Dec 27 23:01:41 2011-12-27T18:11:49.034001Z [INFO] FsoGsmModemHandler <>: Successfully provided the network to the device Dec 27 23:01:41 connmand[705]: Missing support for 802.1d ethernet bridging Dec 27 23:01:57 oops Dec 27 23:02:01 only the second line Dec 27 23:03:02 okay, but in that case it isn't a string you send. Dec 27 23:08:53 dbus-send --system --dest=net.connman /net/connman/technology/bluetooth net.connman.Technology.SetProperty string:State variant:string:"online" Dec 27 23:09:23 I think, "" for string. maybe. Dec 27 23:09:50 ahhh right Dec 27 23:10:58 hmmm didn't work either Dec 27 23:16:50 maybe online isn't right. upper/lowercase? not offline? Dec 27 23:19:56 I think I'll go to bed Dec 27 23:21:21 ok, me too. too bad I couldn't be more of help. Dec 27 23:42:28 ahhh Dec 27 23:42:30 [METHOD] net.connman.Technology.GetProperties() -> (a{sv}:arg_0) Dec 27 23:42:30 [METHOD] net.connman.Technology.SetProperty(s:arg_0, v:arg_1) -> () Dec 27 23:42:43 sv != s:arg_0 v:arg_1 **** ENDING LOGGING AT Wed Dec 28 02:59:57 2011