**** BEGIN LOGGING AT Tue Jan 17 02:59:58 2012 Jan 17 06:42:36 JaMa: intone author claims he hadn't seen your patches, but has applied them now (squashed into one commit) Jan 17 06:45:47 pabs3: I haven't tested them properly in runtime, but fine Jan 17 06:49:28 pabs3: any hint why he sqashed them? Jan 17 06:49:46 none, sorry Jan 17 06:50:50 looks like he doesn't know how to use git :) Jan 17 06:52:30 quite possible :) Jan 17 06:52:45 feel free to poke him about it Jan 17 06:53:50 with next patches.. Jan 17 07:21:49 SHR: 03Martin.Jansa 07meta-smartphone * rcfda042e3456 10/meta-shr/recipes-shr/3rdparty/ (4 files in 2 dirs): intone: bump SRCREV, my patches were applied upstream Jan 17 08:39:29 Good day all , where is backup option in shr-settingd? Jan 17 09:55:24 alabd: it's called 'Other' IIRC Jan 17 09:59:15 mrmoku: yea found it thanks , where was navit and tangogps maps ? Jan 17 09:59:23 in which folder Jan 17 10:01:50 alabd: for tangogps it was /home/root/Maps I think Jan 17 10:01:56 navit depends on config Jan 17 10:02:17 default? Jan 17 10:02:35 dunno Jan 17 10:02:42 check config in /usr/share/navit Jan 17 10:04:00 yea methink they are there Jan 17 10:04:29 have created some icon on shr desktop , where was config files? Jan 17 10:30:52 have shr on NAND wana remove it and install android would some one guide me Jan 17 10:32:28 * JaMa stabs gnutls configure scripts Jan 17 10:32:56 mrmoku: btw newer eve is not much better :/ Jan 17 10:33:11 mrmoku: doesn't segfault but preferences dialog seems wrong Jan 17 10:33:46 or maybe theme is broken, but I don't see how to enable/disable features anymore :/ Jan 17 10:34:20 and looks like eve development is stalled.. last 3 patches are from me (updates for newer EFL or webkit-efl APIs..) Jan 17 10:44:37 JaMa: ok :/ Jan 17 10:45:01 JaMa: the firefox from meta-mozilla is the full bloated one Jan 17 10:45:08 not useable either :/ Jan 17 10:45:28 slow, no touch and everything too big Jan 17 10:46:34 c_c have applied some patches for intone, maybe we can poke him to work again on elm-browser alias ventura Jan 17 10:47:17 but with this unanswered for 14 months.. http://code.google.com/p/elm-browser/issues/detail?id=13 Jan 17 10:47:52 mrmoku, afaik there's an addon in firefox to enable touch features Jan 17 10:48:13 mrmoku, what about trying chromium? Jan 17 10:49:18 is it in OE? Jan 17 10:49:32 not recent version afaik Jan 17 10:49:54 tomorrow I start holidays, I'll start then building a new shr-chroot and try to build some browsers Jan 17 10:50:08 building chroot? :) Jan 17 10:50:11 you too? :) Jan 17 10:50:20 nono, I mean using it :) Jan 17 10:50:27 to build my own images Jan 17 10:50:33 and be able to build recipes :P Jan 17 10:50:50 that's always usefull :) Jan 17 10:51:12 we could try borrowing some browser from meego, tizen or webOS too perhaps Jan 17 10:51:27 and there's a browser for defoaOS too I think Jan 17 10:55:12 pespin: For a fast and rich internet experience: MeeGo Netbook user experience integrates Google Chrome or, if you prefer a fully open source browser solution, Google Chromium is also provided. Jan 17 10:55:42 lol Jan 17 10:56:17 that's netbook though Jan 17 10:56:19 MeeGo Handset Browser provides a basic browser application, with a mobile optimized browser engine powered by Mozilla technology. It supports bookmarks, cookies, plug-ins, add-ons, and the latest web protocols, as provided by the underlying Mozilla technology, such as: HTML, XHTML, XML, XSLT, XPath, DOM, CSS, RDF, MathML, and JavaScript. The browser also supports Flash plug-ins, once installed on the system. Jan 17 10:56:53 http://meego.gitorious.org/meego-browser Jan 17 10:57:43 I fear it won't work standalong though Jan 17 10:57:45 yesterday I tried searching for the tizen browser code but I wasn't able to find it Jan 17 10:58:01 last commit is from August and comment says: Jan 17 10:58:01 Fix BMC 21120 Browser need to integrate with applauncherd for startup Jan 17 10:58:05 perhaps it's not released yet (or it won't be released anytime) Jan 17 11:01:12 TAsn: do you have any idea about what browser tizen is going to use and if it is available already? Jan 17 11:03:36 pespin: http://www.sammobile.com/wp-content/uploads/2012/01/TIZEN9.png Jan 17 11:04:19 mrmoku, yeah, I already saw the image, but didn't find the code Jan 17 11:05:16 hmm... seems to be webkit-efl based Jan 17 11:05:17 pkgs/w/webkit-efl.git Jan 17 11:05:24 I looked here http://source.tizen.org/git/ Jan 17 11:05:50 mrmoku, yeah, that's why I looked for it hehe Jan 17 11:06:00 but maybe it's not open source Jan 17 11:07:51 yeah :/ Jan 17 12:21:25 if said browser is webkit based, wouldn't it be LGPL therefore Jan 17 12:21:30 at least the rendering part? Jan 17 13:03:09 the address link methined here is block for us , is there any other page that learn installition steps ? http://wiki.openmoko.org/wiki/Android#Installation Jan 17 13:33:33 mrmoku: with switch to systemd we should probably disable whole sysinit.service, so that if user opkg install something causing dependency circle doesn't end without ie dbus, like I just was on qemu thanks to fbsetup http://paste.pocoo.org/show/536185/ Jan 17 13:44:12 JaMa: hmm... no problem as long as we have systemd units for everything we want to start :-) Jan 17 13:46:11 yup, better when something "extra" doesn't start after boot, then something important not starting because of it Jan 17 13:51:13 indeed :P Jan 17 13:51:32 and somehow it's dbus most of the time that gets kicked by systemd :/ Jan 17 15:17:51 is there any step by step guide for installing android on FR except this ?http://code.google.com/p/android-on-freerunner/wiki/GetIt (code.google.com is blocked for us ) Jan 17 16:04:27 Hi, what is the quad-band GSM solution that openmoko is looking at? Jan 17 16:06:03 I'm interested in building a "dumb phone" and I'm having a hard time searching for reasonable transceivers. Jan 17 16:21:53 ah eve preferences fixed in theme Jan 17 16:22:06 020 closed, so will be in 021 Jan 17 16:32:09 SHR: 03Martin.Jansa 07meta-smartphone * r05aaa957f6aa 10/meta-shr/conf/distro/shr.conf: meta-shr: switch from packagehistory to buildhistory Jan 17 16:32:13 SHR: 03Martin.Jansa 07meta-smartphone * r793333794041 10/meta-shr/conf/distro/include/preferred-shr-versions.inc: meta-shr: prefer any openssl-1.0.0% Jan 17 17:18:14 mrmoku, I hope it'll be open source Jan 17 17:59:46 mrmoku: if CIA gets annoying please disable update hook in buildhistory repo, but I guess it will only commit not push and even only once for whole build Jan 17 18:00:15 I'll be back in few hours and check Jan 17 18:09:34 this pagehttp://code.google.com/p/android-on-freerunner/wiki/GetIt is blocked for us , would someone guide me to install android on FR ? Jan 17 18:11:07 alabd: where are you from ? Jan 17 18:11:35 nschle85 Iran Jan 17 18:11:59 how is it blocked ? Jan 17 18:12:06 do you need the ip ? Jan 17 18:12:44 no don;t want open the page with proxy , is there any other guide for installing android on fr except the page? Jan 17 18:14:44 my my google hits all points to the page you already found Jan 17 18:17:54 this pagehttp://code.google.com/p/android-on-freerunner/wiki/GetIt is blocked for us , would someone guide me to install android on FR ? Jan 17 18:32:53 JaMa: no annoying CIA so far :-) Jan 17 18:43:16 what's the differences between cupcake and froyo installition for android ? Jan 17 18:44:21 different versiions, but why install android ? Jan 17 18:46:16 nschle85 wana see it on FR ..what's the deifferences between these version ? Jan 17 18:46:26 /s/version/versions Jan 17 18:47:01 the api and features but, i dont really know because i dont use it Jan 17 18:49:49 anyone knows differences between Froyo and cpucake of andriod installation Jan 17 18:52:34 Froyo is Android 2.2. Cupcake is Android 1.5 Jan 17 18:55:37 angelox|laptop: is it possible to install Froyo on NAND? Jan 17 18:56:37 alabd: i do not know, i do not even have an FR Jan 17 19:01:20 nschle85 am checking here http://wiki.openmoko.org/wiki/Android_usage#Froyo_Installation but the download link does not contain any thing Jan 17 19:02:46 alabd: 'http://code.google.com/p/android-on-freerunner/downloads/detail?name=android-on-freerunner-cupcake-stable-201101.tar.gz&can=2&q=' but google may not work for you Jan 17 19:04:49 angelox|laptop: thanks link seems works but isn't Froyo better ? Jan 17 19:05:27 alabd: uh yep, sorry: "http://code.google.com/p/android-on-freerunner/downloads/detail?name=android-on-freerunner-froyo-sd-201109.tar.gz&can=2&q=" Jan 17 19:05:41 let me see Jan 17 19:15:02 angelox|laptop: no it redirects to code.google that is blocked for us , is it the same package ?http://serdar-dere.net/~serdar/ Jan 17 19:16:22 How is it possible to install android on NAND Jan 17 19:19:12 that package on google is the same that were in serdar-dere.net which is not more Jan 17 19:19:24 s/more/more there/ Jan 17 19:19:24 angelox|laptop meant: that package on google is the same that were in serdar-dere.net which is not more there Jan 17 19:21:52 angelox|laptop: no what should be done shr is on NAND how remove it and install android there? Jan 17 19:29:55 pespin: have you had time to look at http://linux.fjfi.cvut.cz/~zub/SHR/libeflvala-3/0002-eflvala-update-toolbar-classes-to-match-C-API.patch ? any feedback? Jan 17 19:30:44 any opinion about how android should be installed on NAND ? Jan 17 19:30:59 zub, didn't know of its existance :P Jan 17 19:31:04 will look at it in some mins Jan 17 19:33:20 ok :) Jan 17 19:41:48 mrmoku, hi Jan 17 19:41:55 mrmoku, I got the same issue on n900 Jan 17 19:42:04 about the occuped sound card (-16) Jan 17 19:42:14 GNUtoo: Hey happy to see you Jan 17 19:42:54 GNUtoo: wana remove shr on nand and install android on anad as you said before , how it should be done dear Jan 17 19:43:06 GNUtoo: ok Jan 17 19:43:38 alabd, download the android install image Jan 17 19:43:42 put it on microsd Jan 17 19:43:48 and boot on it Jan 17 19:43:55 it'll take care of flashing etc... Jan 17 19:45:18 mrmoku, where to start looking? Jan 17 19:45:24 GNUtoo: for installing on nand , having microSD is necessary Jan 17 19:45:26 ? Jan 17 19:47:42 alabd, yes unless you're very good at uboot Jan 17 19:47:52 and it's for android only Jan 17 19:48:06 basically it is because android uses a different partition scheme Jan 17 19:48:14 it repartitionate the NAND Jan 17 19:48:33 and partitions works like that on the freerunner: Jan 17 19:48:43 the bootloader set an environment variable Jan 17 19:48:52 that is passed to the command line of the linux kernel Jan 17 19:49:13 and in that there is how the NAND is partitioned Jan 17 19:49:21 so if you change that Jan 17 19:49:35 the environment variable is used also by the dfu system Jan 17 19:49:44 so that would create inconsistencies Jan 17 19:49:57 so maybe you could try changing that variable Jan 17 19:50:05 to match android's version Jan 17 19:50:17 and flash the images including android's version of QI Jan 17 19:50:29 else just get a microsd Jan 17 19:50:33 even temporarly Jan 17 19:50:42 just for the install Jan 17 19:50:46 *temporarily Jan 17 19:57:51 mrmoku, ah no it seem to work on n900 Jan 17 19:57:56 maybe it was yesterday Jan 17 19:58:08 *maybe it was another problem yesterday on n900 Jan 17 19:58:10 let me retry Jan 17 20:02:05 GNUtoo: m2 is not useless ? Jan 17 20:03:11 m2? Jan 17 20:03:24 m2 memory Jan 17 20:04:43 zub, git pull :) Jan 17 20:05:10 what's that? Jan 17 20:05:13 m2 memory? Jan 17 20:05:39 it is a kind of memry Jan 17 20:05:45 ok Jan 17 20:05:59 pespin: thx :) Jan 17 20:07:04 GNUtoo: unfortunately does not fit in the fr , is it hard to do those steps (without microsd) ? Jan 17 20:07:37 depend on your skills Jan 17 20:07:45 it's just setting a variable in uboot Jan 17 20:07:49 and then dfu-utils Jan 17 20:09:54 GNUtoo: ahve set variable for grub not uboot , how should it be set ? and what should it be said , Jan 17 20:10:21 let me look Jan 17 20:11:22 look what android-on-freerunner changed for QI Jan 17 20:11:28 look for something like that: Jan 17 20:11:30 mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) Jan 17 20:11:51 and put that in nor u-boot Jan 17 20:12:10 alabd, do you have a temporary microsd card? Jan 17 20:12:49 GNUtoo: unfortunately not , it seems easy let's go , should remove old shr on nand first ? Jan 17 20:13:11 yes Jan 17 20:13:13 like that: Jan 17 20:13:15 nand bad Jan 17 20:13:17 nand scrub Jan 17 20:13:20 nand createbbt Jan 17 20:13:31 and instead of doing dynpart set the env yourself Jan 17 20:15:01 what do you mean of nand bad ? Jan 17 20:16:27 http://wiki.openmoko.org/wiki/NAND_bad_blocks#Clearing_BadBlocks Jan 17 20:16:38 you could try without theses commands Jan 17 20:16:48 but for instance for SHR it's necessary Jan 17 20:16:53 because of a bug Jan 17 20:18:24 these steps should be done for formatting nand ? Jan 17 20:18:31 yes Jan 17 20:18:34 that's what it does Jan 17 20:18:43 it'll erase everyhting from it Jan 17 20:19:50 GNUtoo: minicon should be installed on desktop pc ? Jan 17 20:21:06 yes or any other program to talk to serial ports Jan 17 20:21:10 or virtual serial ports Jan 17 20:21:44 ubuntu terminal ? Jan 17 20:21:52 alabd, no idea, I use picocom Jan 17 20:22:10 ok will install it wait Jan 17 20:29:04 GNUtoo: now should do sudo minicom /dev/ttyACM0 ? Jan 17 20:29:40 I don't know minicom Jan 17 20:29:52 I should try it to know Jan 17 20:29:53 how did you install minicon ? Jan 17 20:29:58 picocom Jan 17 20:30:01 I use picocom Jan 17 20:30:05 but yes try sudo Jan 17 20:30:10 sudo su Jan 17 20:30:17 picocom -b 115200 /dev/ttyACM0 Jan 17 20:30:38 [ctrl] + [a] + [d] for disconnecting from picocom btw Jan 17 20:31:13 k Jan 17 20:36:06 mrmoku, it seem to work for me on the last image I compiled Jan 17 20:36:28 SHR 20120116 Jan 17 20:36:34 Revision: 1bc6e7b7b186b41e7bb04f27506f6f364a0793cd Jan 17 20:39:13 GNUtoo: and bad nand scrub nand createbbt dynpart are done now what should be done nstead dynpart set the env yourself ? Jan 17 20:39:32 let me look Jan 17 20:39:57 but look with printenv Jan 17 20:40:47 GNUtoo: pastebin it for you ? Jan 17 20:41:44 set that var: Jan 17 20:41:45 mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) Jan 17 20:42:33 or maybe with mtdparts command Jan 17 20:42:35 like that Jan 17 20:42:42 mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) Jan 17 20:43:04 GNUtoo: which one ? Jan 17 20:43:09 try not to touch the nor Jan 17 20:43:16 else you could brick the phone Jan 17 20:43:40 what do you mean ? which one should be set man ? Jan 17 20:44:09 you didn't understand Jan 17 20:44:14 the second one is the right one Jan 17 20:44:21 but mtdparts is a command too Jan 17 20:44:27 look at old uboot commands Jan 17 20:44:38 I can't help for everything....I've to work on gta04 too Jan 17 20:45:15 ok you said instead of dynenv it's better to use mtdparts ? Jan 17 20:45:16 can't you just buy a microsd? Jan 17 20:45:18 or find one Jan 17 20:45:49 it's not dynenv Jan 17 20:45:51 it's dynpart Jan 17 20:45:58 forget the dynenv and the saveenv Jan 17 20:46:40 but it has used dynenv set u-boot_env to set env Jan 17 20:46:50 ? Jan 17 20:47:40 as here said mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) Jan 17 20:47:43 sorry Jan 17 20:48:04 alabd, you should find out yourself reading the docs Jan 17 20:48:07 as here said http://wiki.openmoko.org/wiki/NAND_bad_blocks#Clearing_BadBlocks Jan 17 20:48:09 because I never did it Jan 17 20:48:30 by it I mean change the variables to install android Jan 17 20:48:37 and I don't want to try Jan 17 20:48:42 I've SHR installed on it already Jan 17 20:48:47 and I want to keep it Jan 17 20:48:52 it's a working version.... Jan 17 20:48:55 with data in it Jan 17 20:49:00 like phone numnbers Jan 17 20:49:07 that I don't know how to sync with the sim Jan 17 20:49:37 ok man am trying it but you just tell me ... have done nand bad nand scrub nand createbbt before now should run dynpart Jan 17 20:49:39 yes? Jan 17 20:49:59 don't run dynpart and what's following Jan 17 20:50:23 didn't run Jan 17 20:50:26 so after nand createbbt Jan 17 20:50:28 should run Jan 17 20:50:37 mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) Jan 17 20:50:42 yes? Jan 17 20:50:51 yes something like that but with the android version of it Jan 17 20:51:00 look in android's QI source Jan 17 20:51:05 in gta02.c Jan 17 20:51:58 is there such file ? http://serdar-dere.net/~serdar/ Jan 17 20:52:12 sigh I've no idea you should look Jan 17 20:52:45 else there is another option Jan 17 20:52:50 use strings on the QI binary Jan 17 20:53:54 man code.google is blocked for us and have just http://serdar-dere.net/~serdar/ and here just have qi.img Jan 17 20:54:02 then string it Jan 17 20:54:14 and grep for mtdparts Jan 17 20:54:30 if you want I can host images Jan 17 20:55:12 are not they here http://serdar-dere.net/~serdar/ ? Jan 17 20:55:25 if they are not will be so thankfull man Jan 17 20:55:55 and what do you mean string it ? (cann't get) Jan 17 20:55:59 there are no images there Jan 17 20:56:02 it's a command Jan 17 20:56:41 $ repo init -u git://gitorious.org/android-on-freerunner/freerunner_platform_manifest.git -b froyo #they're on gitorious Jan 17 20:56:46 let me look Jan 17 20:57:52 https://gitorious.org/android-on-freerunner/platform_bootable_bootloader_qi should have it Jan 17 20:58:57 ouch Jan 17 20:59:03 it's dynamically generated Jan 17 20:59:48 aha Jan 17 20:59:51 wait a second Jan 17 21:00:11 https://gitorious.org/android-on-freerunner/platform_bootable_bootloader_qi/commit/36bb5c03756268ff15b2d95a043ffb39a919ce5c/diffs/39694bf467b168214a6710c99cfb3c4497a14d9d Jan 17 21:00:16 man thank you for your kindness Jan 17 21:00:16 look in gta02.c block Jan 17 21:00:25 there is: Jan 17 21:00:30 { "qi", 0x40000 }, Jan 17 21:00:35 { "depr-ub-env", 0x40000 }, Jan 17 21:00:36 etc... Jan 17 21:00:51 but instead of rootfs Jan 17 21:00:55 there is system and userdata Jan 17 21:01:53 basically they splitted rootfs in system+userdata Jan 17 21:02:05 am afriad to do it wrong Jan 17 21:02:22 what will happen if set bad env? Jan 17 21:02:26 that's why if you could get a microsd even temporarly Jan 17 21:02:35 if you don't touch the NOR there is no risk Jan 17 21:02:41 if you touch the NOR..... Jan 17 21:02:46 ohum Jan 17 21:03:07 so should change things from neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) Jan 17 21:03:20 keep most of it Jan 17 21:03:24 but change rootfs only Jan 17 21:04:21 basically 64M (0x4000000) of system and the rest for userdata Jan 17 21:05:18 <[Rui]> hi Jan 17 21:05:28 GNUtoo: change rootfs only ? Jan 17 21:05:55 I mean keep all other variables as-is Jan 17 21:05:56 hi Jan 17 21:07:09 GNUtoo: but in the .c file is { "rootfs", 0 }, Jan 17 21:07:19 which branch? Jan 17 21:07:31 I did a diff between master and koolu branches Jan 17 21:07:37 v Jan 17 21:07:39 src/cpu/s3c2442/gta02.c(10 / 33) Jan 17 21:07:51 rootfs is in red in my link Jan 17 21:07:53 look down Jan 17 21:08:01 red means stuff removed Jan 17 21:08:05 green means stuff added Jan 17 21:08:46 but there is no other rootfs added ? Jan 17 21:08:53 no Jan 17 21:08:54 look down Jan 17 21:08:57 there is system Jan 17 21:09:04 and userdata Jan 17 21:10:48 GNUtoo: is it correct ? > mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x4000000(rootfs) Jan 17 21:11:15 no Jan 17 21:11:35 change rootfs with the values here: Jan 17 21:11:42 "system", 0x4000000 Jan 17 21:11:51 and userdata for the rest Jan 17 21:12:27 ah wait Jan 17 21:12:29 there is a problem Jan 17 21:13:49 I've that on my openmoko: Jan 17 21:13:50 mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) Jan 17 21:13:53 so change to that: Jan 17 21:14:24 this is the sam as before no ? Jan 17 21:15:05 so why you said there is problem? Jan 17 21:15:20 mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x4000000(system),0xb6a0000(userdata) Jan 17 21:15:33 I hope I did the maths right Jan 17 21:15:40 :P Jan 17 21:15:57 and then flash quickely with dfu-utils Jan 17 21:16:05 do you have an image to flash Jan 17 21:16:09 what image do you want? Jan 17 21:16:22 what d o you advice? Jan 17 21:16:38 what version of android do you want? Jan 17 21:16:39 1.5? Jan 17 21:16:47 what do you advice? Jan 17 21:16:54 1.5 is older Jan 17 21:16:55 but better Jan 17 21:17:00 faster etc... Jan 17 21:17:11 I heard some users complaining about 2.2 Jan 17 21:17:12 does it make sense Jan 17 21:17:14 I didn't check Jan 17 21:17:30 much faster and stabler? Jan 17 21:17:42 let me look Jan 17 21:18:19 man shouldn't userdata be 0 here > mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x4000000(system),0xb6a0000(userdata) Jan 17 21:18:29 no Jan 17 21:18:36 I've done the maths Jan 17 21:18:45 rootfs wasn't 0 Jan 17 21:19:17 since it's used by u-boot too I prefer doing the same than they do Jan 17 21:19:41 userdata is 0 here https://gitorious.org/android-on-freerunner/platform_bootable_bootloader_qi/commit/36bb5c03756268ff15b2d95a043ffb39a919ce5c/diffs/39694bf467b168214a6710c99cfb3c4497a14d9d Jan 17 21:20:10 yes but it's not u-boot Jan 17 21:20:19 u-boot uses the variable for dfu too Jan 17 21:20:25 not only for boot arguments Jan 17 21:20:46 so the lastest you gave is ok will try it now :D Jan 17 21:22:01 GNUtoo: how do you copy it into terminal seems does not copy after = Jan 17 21:22:39 \= Jan 17 21:22:49 type it by hand Jan 17 21:23:06 ot try \= if it doesn't work Jan 17 21:26:32 GNUtoo: again stops at ( then with adding \ does not solve Jan 17 21:27:30 even typing it *manually*? Jan 17 21:30:09 another problem typing manually probable fr powers off Jan 17 21:31:47 there is a timeout Jan 17 21:31:51 maybe remove the timeout Jan 17 21:31:57 I don't remember how to do it tough Jan 17 21:33:56 GNUtoo: 0x4000000 should be have one char more no ? Jan 17 21:34:03 ah? Jan 17 21:34:25 { "system", 0x4000000 }, Jan 17 21:35:13 GNUtoo: becuase others kernel ,uboot andso are one char more in lenght Jan 17 21:37:12 then add a 0 like that: Jan 17 21:37:30 0x04000000(system),0x0b6a0000(userdata) Jan 17 21:39:20 ohum it turned off should type all again :( Jan 17 21:43:53 no should find a way to copy it , again problem Jan 17 21:45:43 alabd, as I said there is a timeout Jan 17 21:45:48 find the timeout variable Jan 17 21:57:03 GNUtoo: you mean in help of picocom ? Jan 17 21:58:53 ? Jan 17 21:59:04 ah no Jan 17 21:59:04 for timeout Jan 17 21:59:07 in uboot Jan 17 21:59:48 you mean after connecting to ttyacmo ? Jan 17 21:59:53 yes Jan 17 21:59:56 u-boot Jan 17 22:00:03 is the bootloader you are talking to Jan 17 22:00:09 didn't find timeout in that help Jan 17 22:00:37 let me look Jan 17 22:02:09 http://wiki.openmoko.org/wiki/Bootloader_environment#Timeouts Jan 17 22:02:26 should find a way for copy because it's probable we make mistake in writting Jan 17 22:05:03 ok Jan 17 22:05:06 there are scripts Jan 17 22:05:10 look in openmoko wiki Jan 17 22:05:17 there are like stuff that replace picocom Jan 17 22:05:33 there was one written in python Jan 17 22:11:26 GNUtoo: Unknown command 'neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata)' - try 'help' Jan 17 22:12:18 you forget the beginning of the command Jan 17 22:12:34 no Jan 17 22:12:39 typed them too Jan 17 22:12:39 ah? Jan 17 22:12:47 what did you type exactly then? Jan 17 22:12:49 mtdparts mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x4000000(system),0xb6a0000(userdata) Jan 17 22:13:00 hmmm Jan 17 22:13:02 I don't know Jan 17 22:13:05 maybe try: Jan 17 22:13:13 setenv mtdparts physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x4000000(system),0xb6a0000(userdata) Jan 17 22:13:32 note that the = is lacking at the beginning and it's normal Jan 17 22:16:15 GNUtoo: ok after doing this step well what should be done , code.google is blocked for us where to get required files for installiation Jan 17 22:17:33 here: Jan 17 22:18:00 http://gnutoo.homelinux.org/downloads/people/alabd/android-on-freerunner-cupcake-stable-201101.tar.gz Jan 17 22:18:10 altough don't publicize it too much Jan 17 22:18:21 because it slows down my connection like very very slow Jan 17 22:19:49 GNUtoo: sure man Jan 17 22:23:53 GNUtoo: again Unknown command 'neo1973-nand:0x00040000(u-boot),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a000' - try 'help' Jan 17 22:24:06 buying microsd was easier :D Jan 17 22:24:08 seenv unknown command? Jan 17 22:24:15 yes that's what I keep repeating you Jan 17 22:24:20 *setenv Jan 17 22:27:22 what should be done with microsd GNUtoo? Jan 17 22:27:41 just untar all the files on the microsd Jan 17 22:27:44 and boot it Jan 17 22:27:46 and you're done Jan 17 22:27:51 no ? Jan 17 22:28:11 but wana install it on NAND man Jan 17 22:29:08 yes that's the point Jan 17 22:29:15 it will install it on NAND for you Jan 17 22:29:23 that's what I've been keeping repeating you Jan 17 22:29:39 it boots a kernel with an initramfs that takes care of the installation for you Jan 17 22:29:50 you just boot that microsd and it's ok Jan 17 22:30:38 so it will automatically install it on NAND Jan 17 22:30:39 nice Jan 17 22:31:20 so it will automatically install it on NAND yes GNUtoo ? Jan 17 22:31:28 yes it will Jan 17 22:31:31 that's the point Jan 17 22:31:47 that's why I kept repeating you to use a temporary microsd Jan 17 22:31:56 but something is wrong in setenv mtdparts physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x4000000(system),0xb6a0000(userdata) Jan 17 22:32:05 if command was ok we were done Jan 17 22:34:35 GNUtoo: thanks a lot man , Allah bless you Jan 17 22:36:16 let me try then Jan 17 22:36:22 note that I'm atheist Jan 17 22:36:55 (I take the religion like a philosophy or moral but that's all) Jan 17 22:36:57 GNUtoo: if there is allah ask him bless you ;) Jan 17 22:37:12 ok lol Jan 17 22:40:40 GNUtoo: it's too late here 2:09 how long does it take for you to try ? Jan 17 22:42:06 maybe there is a quicker way Jan 17 22:42:18 I'm looking at the help of mtdparts Jan 17 22:42:24 but ; is wrong anyway Jan 17 22:42:33 ohum Jan 17 22:42:34 it should be \; Jan 17 22:46:18 GNUtoo: maybe try it about 5 hours later , up to what time you are here? Jan 17 22:46:31 hmmm I made an error typing Jan 17 22:46:34 let me correct Jan 17 22:46:49 tanx bro Jan 17 22:48:58 nand0: partition (userdata) size alignment incorrect Jan 17 22:48:59 hmmm Jan 17 22:49:00 let me retry Jan 17 22:49:27 oh Jan 17 22:58:48 GNUtoo: up to what time you are here? Jan 17 22:59:37 am so tired wana go bed ,maybe come back about 5 hours later Jan 17 22:59:43 neo1973-nand: partitioning exceeds flash size Jan 17 22:59:51 one last try Jan 17 22:59:58 I go to bed very very soon Jan 17 23:00:18 and when will you come back ? Jan 17 23:00:24 tomorrow Jan 17 23:00:38 :D mean what time bro Jan 17 23:01:43 5: system 0x04000000 0x00d20000 0 Jan 17 23:01:43 6: userdata 0x0b2e0000 0x04d20000 0 Jan 17 23:01:46 works Jan 17 23:01:57 oh you tried android ? Jan 17 23:02:10 no Jan 17 23:02:16 I tried repartitioning Jan 17 23:02:21 without touching my install Jan 17 23:02:34 ohum what command should be used for me Jan 17 23:02:37 http://www.pastie.org/3204279 Jan 17 23:03:01 and you should flash the images right after Jan 17 23:03:52 ok wait Jan 17 23:04:12 so for me Jan 17 23:04:24 setenv mtdparts mtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x000400000(factory),0x04000000(system),-(userdata) Jan 17 23:04:30 will work / Jan 17 23:04:31 ? Jan 17 23:05:40 no idea Jan 17 23:05:44 it seem to differ a bit Jan 17 23:05:50 again why not buying a small microsd Jan 17 23:05:59 buy a microsd Jan 17 23:06:01 if you can Jan 17 23:06:11 it'll save you and me a lot of time Jan 17 23:06:24 should buy one 4 gig later at least Jan 17 23:06:27 0xb6a0000(userdata) Jan 17 23:06:28 ok Jan 17 23:06:38 6: userdata 0x0b2e0000 0x04d20000 0 Jan 17 23:06:38 for android mabe need 0xb6a0000(userdata) Jan 17 23:06:41 that's my problem Jan 17 23:06:51 indeed but it says it go over the space that there is Jan 17 23:06:58 if I put that Jan 17 23:08:02 wil add 0xb6a0000(userdata) tomorow and see result Jan 17 23:08:20 thanks you again man for your attentions Jan 17 23:08:50 have nice night ,sleep well , bye Jan 17 23:09:18 see u tomorrow Jan 17 23:10:14 ahhh Jan 17 23:10:19 I messed up factory Jan 17 23:53:14 Project shr-core-setup build #2: SUCCESS in 15 sec: http://norman-schleicher.de/jenkins/job/shr-core-setup/2/ Jan 18 00:21:57 mrmoku: heh cia was silent because of: "bash: git-rev-list: command not found" I guess.. but fixed.. Jan 18 00:22:20 tomorrow we'll see Jan 18 00:58:18 Project shr-core-om-gta02-shr-image build #68: SUCCESS in 1 hr 5 min: http://norman-schleicher.de/jenkins/job/shr-core-om-gta02-shr-image/68/ Jan 18 01:02:58 Project shr-core-om-gta02-feed build #7: SUCCESS in 4 min 39 sec: http://norman-schleicher.de/jenkins/job/shr-core-om-gta02-feed/7/ Jan 18 01:17:27 Project shr-core-om-gta02-aurora-image build #9: SUCCESS in 14 min: http://norman-schleicher.de/jenkins/job/shr-core-om-gta02-aurora-image/9/ Jan 18 01:44:16 SHR: 03shr-devel 07buildhistory * reee337896f88 10/packages/om_gta04-oe-linux-gnueabi/ (48 files in 48 dirs): Build 201201180120 of shr 20120118 for machine om-gta04 on shr-chroot Jan 18 02:26:45 Project shr-core-nokia900-shr-image build #52: SUCCESS in 1 hr 9 min: http://norman-schleicher.de/jenkins/job/shr-core-nokia900-shr-image/52/ Jan 18 02:33:51 Project shr-core-nokia900-feed build #6: SUCCESS in 7 min 6 sec: http://norman-schleicher.de/jenkins/job/shr-core-nokia900-feed/6/ Jan 18 02:55:54 Project shr-core-nokia900-aurora-image build #9: SUCCESS in 22 min: http://norman-schleicher.de/jenkins/job/shr-core-nokia900-aurora-image/9/ **** ENDING LOGGING AT Wed Jan 18 02:59:56 2012