**** BEGIN LOGGING AT Wed Dec 26 02:59:59 2012
Dec 26 11:14:51 <morphis> GNUtoo: ping
Dec 26 11:15:34 <morphis> GNUtoo: I am importing right now the an30259a kernel driver for the leds in the tuna device from the S3 kernel source (https://raw.github.com/sgs3/GT-I9300_Kernel/master/drivers/leds/leds-an30259a.c)
Dec 26 11:15:39 <morphis> it has a proper sysfs interface
Dec 26 11:33:48 <morphis> GNUtoo: http://git.shr-project.org/git/?p=linux.git;a=commit;h=220f7646d5d9398645b40e8bcd91a3e80aaba765
Dec 26 11:33:53 <morphis> GNUtoo: it's still untested
Dec 26 11:34:04 <morphis> will push it to master after I have tested it
Dec 26 12:18:52 <GNUtoo> morphis, ok
Dec 26 12:18:58 <GNUtoo> morphis, I've rotation on GTA04
Dec 26 12:19:00 <GNUtoo> WIP tough
Dec 26 12:19:05 <morphis> nice
Dec 26 12:19:18 <GNUtoo> it will probably works for tuna too
Dec 26 12:19:21 <GNUtoo> it's not usable yet
Dec 26 12:19:24 <GNUtoo> but it rotates
Dec 26 12:19:26 <GNUtoo> once....
Dec 26 13:24:38 <GNUtoo> JaMa|Off, hi
Dec 26 13:24:48 <GNUtoo> JaMa|Off, I've some questions about Xorg.....
Dec 26 13:25:11 <GNUtoo> basically when I rotate in xf86-video-omapfb the X and Y are swapped
Dec 26 13:25:18 <GNUtoo> should I handle that in the code?
Dec 26 13:25:37 <GNUtoo> or maybe I should try on another device than gta04
Dec 26 13:25:43 <GNUtoo> gta04 has invertY in xorg.conf
Dec 26 13:34:42 <JaMa|Off> that you mean by X and Y? for touchscreen?
Dec 26 13:34:58 <JaMa|Off> check ~/meta-smartphone/meta-shr/recipes-graphics/xorg-xserver/xserver-xorg/randr-support.patch if it's caused by that
Dec 26 13:36:40 <GNUtoo> JaMa|Off, ok
Dec 26 13:36:50 <GNUtoo> I mean that the X and the Y are swapped
Dec 26 13:37:01 <GNUtoo> basically if I go up it goes left
Dec 26 13:37:16 <GNUtoo> let me try rotation on tuna
Dec 26 13:37:18 <JaMa|Off> are you talking about graphics or touchscreen?
Dec 26 13:37:53 <GNUtoo> both
Dec 26 13:38:06 <GNUtoo> I've got xrandr -o 1 working on gta04
Dec 26 13:38:12 <GNUtoo> but on tuna it fails 
Dec 26 13:38:16 <GNUtoo> tuna uses tiler
Dec 26 13:40:19 <GNUtoo> basically when I rotate the grahics rotate well(on gta04)
Dec 26 13:40:23 <GNUtoo> but not the touch
Dec 26 13:40:33 <GNUtoo> and I've other issues too
Dec 26 13:40:39 <GNUtoo> such as not working on tuna yet
Dec 26 13:40:53 <GNUtoo> and xrandr -o 0 fails to go back to portrait
Dec 26 13:41:56 <GNUtoo> ah rotate_type is 0 on tuna
Dec 26 13:41:58 <GNUtoo> still
Dec 26 13:42:04 <GNUtoo> even with the right cmdline
Dec 26 13:43:12 <GNUtoo> I'll port to tuna later
Dec 26 13:47:17 <GNUtoo> JaMa|Off, the issue is that there is no comment on what the patch is supposed to do
Dec 26 13:47:26 <GNUtoo> for instance a comment such as:
Dec 26 13:47:40 <GNUtoo> GTA02 has a bad kernel driver with inversed axes and needs that patch
Dec 26 13:48:03 <GNUtoo> basically I do not see what the patch is supposed to change
Dec 26 13:49:22 <lindi-> my gta02 works just fine without randr-support.patch
Dec 26 13:49:35 <lindi-> using unmodified Xorg from debian
Dec 26 13:50:00 <lindi-> (fbdev driver)
Dec 26 13:52:32 <GNUtoo> ahhh
Dec 26 13:52:43 <GNUtoo> the glamo driver has some code for rotation
Dec 26 13:52:54 <GNUtoo> and in that code they change stuff with reguard to input
Dec 26 13:53:10 <GNUtoo> so maybe if we drop that code.....
Dec 26 13:53:15 <GNUtoo> and use the generic one instead....
Dec 26 13:54:15 <GNUtoo> let me find the code
Dec 26 14:00:51 <GNUtoo> or maybe it was in xf86-input-fbdev
Dec 26 14:00:56 <GNUtoo> let me find it
Dec 26 14:01:05 <lindi-> I use input-evdev
Dec 26 14:01:07 <GNUtoo> PointerMoved = 
Dec 26 14:01:10 <GNUtoo> oops
Dec 26 14:01:21 <GNUtoo> * xf86-video-fbdev
Dec 26 14:01:26 <GNUtoo> not input, video
Dec 26 14:02:14 <GNUtoo> yes it is
Dec 26 14:02:16 <GNUtoo>                 pScrn->PointerMoved = FBDevPointerMoved;
Dec 26 14:02:42 <GNUtoo> lindi-, how do you rotate?
Dec 26 14:02:46 <GNUtoo> xrandr -o 1?
Dec 26 14:02:51 <GNUtoo> or statically in xorg.conf?
Dec 26 14:04:14 <lindi-> GNUtoo: I don't rotate
Dec 26 14:04:23 <GNUtoo> ah ok
Dec 26 14:04:31 <GNUtoo> theses patches are for rotation
Dec 26 14:04:53 <GNUtoo> so you're in RR_ROTATE_0
Dec 26 14:05:01 <GNUtoo> (portrait mode)
Dec 26 14:05:34 <GNUtoo> I'll remove the patch and try to fix xf86-video-glamo too while I'm at it
Dec 26 14:05:43 <GNUtoo> after helping paulk-desktop tough
Dec 26 18:00:25 <aloniv> what to do if phone is stuck? ssh does not work either...
Dec 26 18:00:43 <aloniv> (i can probably restart but want to backup session)
Dec 26 18:42:56 <GNUtoo> aloniv, what phone?
Dec 26 18:43:01 <GNUtoo> gta02?
Dec 26 18:43:16 <GNUtoo> what distro also
Dec 26 18:51:03 <aloniv> it's the "black screen"
Dec 26 18:51:09 <aloniv> yes gta02
Dec 26 18:51:16 <aloniv> i've had it on all distros
Dec 26 18:51:21 <aloniv> qtmoko, om2009 etc
Dec 26 18:51:41 <aloniv> i wanted to backup data though this time without removing battery
Dec 26 18:51:54 <aloniv> is it possible?
Dec 26 18:52:01 <aloniv> ssh doesn;t work
Dec 26 18:52:54 <aloniv> when ringing their is a tone but screen doesn;t respond
Dec 26 18:53:06 <aloniv> (a tone on the other line that is)
Dec 26 18:54:31 <aloniv> the phone seems "dead" but clearly isn't
Dec 26 18:54:54 <aloniv> since i wrote some document on xournal i'd like to restore it
Dec 26 18:55:04 <aloniv> and rebooting will probably remove it
Dec 26 18:56:20 <aloniv> if i wait for it to "die" will it save the document?
Dec 26 18:59:17 <aloniv> *there
Dec 26 19:01:24 <GNUtoo> hmmm
Dec 26 19:01:32 <GNUtoo> what is the distro installed on it?
Dec 26 19:02:06 <GNUtoo> I see that it's difficult
Dec 26 19:02:17 <aloniv> currently om 2009 but this problem has occured on other distros also, e.g. qtmoko v35 and v26...
Dec 26 19:02:29 <GNUtoo> there is no ssh on om2009?
Dec 26 19:02:43 <aloniv> there is but not from this "bricked" state
Dec 26 19:02:53 <GNUtoo> else there is still a risky way
Dec 26 19:02:57 <GNUtoo> serial....
Dec 26 19:03:08 <GNUtoo> risky means that it could be reset while putting the cable
Dec 26 19:03:47 <GNUtoo> because sometimes when I plug the debug board in, serial reset the boards
Dec 26 19:03:51 <GNUtoo> *board
Dec 26 19:04:14 <GNUtoo> if you call the phone it won't ring?
Dec 26 19:04:23 <GNUtoo> if you try to ssh in it it won't respond?
Dec 26 19:04:28 <GNUtoo> if you try to ping it?
Dec 26 19:04:30 <aloniv> i can hear dialing on other end
Dec 26 19:04:46 <aloniv> when connected light doesn;t turn on and device isn;t listed
Dec 26 19:05:09 <aloniv> so i'm guessing some software crashed
Dec 26 19:05:39 <aloniv> i prefer not to hard reboot as that will kill temp right?
Dec 26 19:06:11 <aloniv> will temp be backed up if empty battery causes shutdown? 
Dec 26 19:06:55 <aloniv> by hard reboot i mean taking out battery
Dec 26 19:07:39 <GNUtoo> I guess if the kernel crashed it would be very hard to get back the data
Dec 26 19:07:54 <aloniv> :(
Dec 26 19:08:00 <GNUtoo> do you have a debug board?
Dec 26 19:08:09 <GNUtoo> because there is ctrl+alt+printscreen
Dec 26 19:08:12 <aloniv> sadly no but i could probably get one
Dec 26 19:08:21 <GNUtoo> ok
Dec 26 19:08:42 <aloniv> can the phone be charged at all in this state?
Dec 26 19:10:07 <aloniv> if kernel crashed how come the modem still works?
Dec 26 19:17:49 <GNUtoo> modem is separated from the CPU
Dec 26 19:18:23 <GNUtoo> if you can't ping it I would says that the CPU can't be accessed unless you have the debug board or soldering iron
Dec 26 19:18:35 <GNUtoo> (if you usually can ping it)
Dec 26 19:20:14 <GNUtoo> was the data that important?
Dec 26 19:24:34 <aloniv> technically it was :(
Dec 26 19:24:44 <aloniv> wrote some notes in alecture
Dec 26 19:25:15 <aloniv> if i let machine "die" won;t it save programmes before shutting down?
Dec 26 19:26:15 <aloniv> how can i ping if it isn't recognised as usb0 or eth1?
Dec 26 19:28:46 <aloniv> what address to ping to if it isn't recognised?
Dec 26 20:09:50 <GNUtoo> aloniv, do like if you would ssh inside
Dec 26 20:09:57 <GNUtoo> and ping it instead of sshing
Dec 26 20:10:55 <aloniv> i need to first set ip via ifconfig but usb0 or eth1 doesn't appear
**** ENDING LOGGING AT Thu Dec 27 02:59:58 2012