**** BEGIN LOGGING AT Fri Oct 02 02:59:56 2009
Oct 02 04:22:30 <kraft8181> I am tryning to connect the FR via USB to the internet, but I do not have any luck in doing it. I can ping from the FR to my laptop, but not to the outside world. Any ideas?
Oct 02 04:24:04 <kraft8181> I am on a OpenSuse box...
Oct 02 04:30:54 <kraft8181> If my question is too vague, please let me know what kind of info you would need to help connect?.... I have followed the suggestions on http://wiki.openmoko.org/wiki/Usb_networking but to no avail
Oct 02 04:31:49 <kraft8181> I suspect it to be related to my network setup on the laptop...?
Oct 02 04:35:28 <arg0_> here's what i use (works on ubuntu) sudo iptables -I INPUT 1 -s 192.168.0.202 -j ACCEPT
Oct 02 04:35:28 <arg0_> sudo iptables -I OUTPUT 1 -s 192.168.0.200 -j ACCEPT
Oct 02 04:35:28 <arg0_> sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
Oct 02 04:35:28 <arg0_> sudo bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
Oct 02 04:57:22 <kraft8181> thx
Oct 02 05:04:20 <arg0_> kraft8181: did it work?
Oct 02 05:21:34 <Slaxxer> kraft8181
Oct 02 05:22:02 <Slaxxer> is gone
Oct 02 05:30:45 <CIA-44> freesmartphone.org: 03tom 07libframeworkd-glib * r9d927a18ab0a 10/src/opimd/dbus/contacts.h: 
Oct 02 05:30:45 <CIA-44> freesmartphone.org: fixed a typo in get single contact
Oct 02 05:30:45 <CIA-44> freesmartphone.org: Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de>
Oct 02 05:30:46 <CIA-44> freesmartphone.org: 03tom 07libframeworkd-glib * r29d54fc0231d 10/src/opimd/dbus/contacts.h: 
Oct 02 05:30:46 <CIA-44> freesmartphone.org: fixed another typo in get single contact async
Oct 02 05:30:48 <CIA-44> freesmartphone.org: Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de>
Oct 02 05:38:01 <mostly_useless> oh, most generous people of the openmoko channel.
Oct 02 06:16:56 <raster> mostly_useless: oh subservient weasling scum that doth enter our presence. prostrate thyself and beg for mercy!
Oct 02 06:17:02 <raster> :)
Oct 02 08:32:24 <Daramarak> top of the morning openmokoistas!
Oct 02 08:33:06 <Daramarak> Any one know if it is possible to make the FR act as an accesspoint?
Oct 02 08:33:45 <PaulFertser> Daramarak: wifi AP?
Oct 02 08:33:49 <PaulFertser> Daramarak: or BT?
Oct 02 08:34:26 <PaulFertser> Daramarak: screw that, both are possible ;)
Oct 02 08:34:39 <PaulFertser> Daramarak: but for wifi you'll need a good extarnal usb wifi adapter.
Oct 02 08:36:25 <Daramarak> PaulFertser: Hi, I was thinking of wifi. But I need some hardware then?
Oct 02 08:37:14 <PaulFertser> Daramarak: probably adhoc mode will work with internal wlan but you can't call it a real AP.
Oct 02 08:39:06 <Daramarak> PaulFertser: I havent been able to connect my laptop with the FR in adhoc. But I guess that is my lack of experience with wifi/linux
Oct 02 08:43:07 <Daramarak> PaulFertser: Perhaps I should look for a tutorial/web page on BT networking instead.
Oct 02 08:43:45 <PaulFertser> Daramarak: manually using bluetooth on OM wiki
Oct 02 08:44:23 <Daramarak> PaulFertser: ok, thanks.
Oct 02 11:24:43 <CIA-44> freesmartphone.org: 03mok 07libframeworkd-glib * r04f3f0d5d6f8 10/src/opimd/ (8 files in 2 dirs): 
Oct 02 11:24:43 <CIA-44> freesmartphone.org: opimd: rename all GetSingle{Contact,Message} to entry
Oct 02 11:24:43 <CIA-44> freesmartphone.org: Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de>
Oct 02 12:24:38 <CIA-44> freesmartphone.org: 03mickey 07cornucopia * r3297a50af3d2 10/fsogsmd/src/ (4 files in 2 dirs): fsogsmd: implement org.freesmartphone.GSM.Device.SetMicrophoneMuted
Oct 02 12:24:39 <CIA-44> freesmartphone.org: 03mickey 07cornucopia * r1a617e05ab5e 10/fsogsmd/src/ (5 files in 2 dirs): fsogsmd: implement org.freesmartphone.GSM.Device.GetPowerStatus()
Oct 02 12:24:40 <CIA-44> freesmartphone.org: 03mickey 07cornucopia * rbbcb879d0252 10/fsogsmd/src/ (3 files in 2 dirs): 
Oct 02 12:24:40 <CIA-44> freesmartphone.org: fsogsmd: all sent commands now go through a function in the modem class
Oct 02 12:24:40 <CIA-44> freesmartphone.org: this gives the modem the chance to decide which channel a command goes
Oct 02 12:24:41 <CIA-44> freesmartphone.org: through at any given time! It also simplifies the mediators even more :)
Oct 02 12:24:43 <CIA-44> freesmartphone.org: 03mickey 07cornucopia * rea6af5ad52a1 10/fsogsmd/src/lib/mediators.vala: fsogsmd: use new way for sending commands everywhere
Oct 02 12:24:52 <CIA-44> freesmartphone.org: 03mickey 07libfso-glib * r5b59af0366f1 10/ (4 files in 2 dirs): bump vala requirement and regenerate
Oct 02 12:26:55 <CIA-44> freesmartphone.org: 03mickey 07specs * rd9db68420aad 10/ (4 files in 4 dirs): reenable org.freesmartphone.GSM.Device.GetPowerStatus
Oct 02 12:26:57 <CIA-44> freesmartphone.org: 03mickey 07specs * r6955197140f9 10/org.freesmartphone.Device/org.freesmartphone.Device.RealtimeClock.xml.in: org.freesmartphone.Device.RealtimeClock: fix cut'n'paste typo
Oct 02 12:27:29 <CIA-44> freesmartphone.org: 03mickey 07phonesim * r2a5c54840016 10/modems/generic.xml: generic.xml: add support for (non-working) clock
Oct 02 12:29:18 <CIA-44> freesmartphone.org: 03mickey 07libeflvala * rd7678dc8877d 10/ (4 files in 3 dirs): examples: add example for ecore glib mainloop integration
Oct 02 14:21:39 <UberNeo> how to use accelerometers on SHR-U
Oct 02 15:45:06 <PBeck> hi
Oct 02 15:45:14 <naeg> where can i push up the volume of my mic again?
Oct 02 15:47:30 <PBeck> alsamixer
Oct 02 15:49:46 <naeg> PBeck: but there is some file somewhere? and which channel is it?
Oct 02 15:50:09 <naeg> asound.state, but which control? 4?
Oct 02 15:50:53 <PBeck> naeg: you have to test it
Oct 02 15:51:06 <PBeck> naeg: gsmhandset.state?
Oct 02 15:51:23 <naeg> PBeck: i think it's 6 but i am not sure...
Oct 02 15:51:33 <naeg> i can't really test it atm
Oct 02 15:51:50 <naeg> 5* not 6
Oct 02 16:03:48 <CIA-44> freesmartphone.org: 03mok 07libframeworkd-glib * r1b6f1deee527 10/src/opimd/ (4 files in 2 dirs): 
Oct 02 16:03:48 <CIA-44> freesmartphone.org: opimd: add opimd_message_delete
Oct 02 16:03:50 <CIA-44> freesmartphone.org: Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de>
Oct 02 16:07:35 <sjd> hey! i just came to see whether I can switch my mobile phone to the Openmoko system. Is it possible? Im using a Nokia 6600.
Oct 02 16:09:31 <sjd> is there anyone to help?
Oct 02 16:11:31 <SpeedEvil> no, alas
Oct 02 16:11:59 <sjd> SpeedEvil: ?
Oct 02 16:12:42 <pa4wdh> sjd: A list of supported phones can be found here: http://wiki.openmoko.org/wiki/Openmoko_supported_devices
Oct 02 16:23:10 <tuxi> hi, how the hell can i shutdown qt moko?
Oct 02 16:28:00 <zear> hello there, does anyone know why i'm getting this error, when i try to install a package via opkg? http://wklej.org/id/163150/txt
Oct 02 16:34:19 <CIA-44> freesmartphone.org: 03mok 07libframeworkd-glib * rc4fe9450bd5a 10/src/opimd/frameworkd-glib-opimd-messages.c: 
Oct 02 16:34:19 <CIA-44> freesmartphone.org: opimd: remove all g_free(proxy) calls as they seem to segfault
Oct 02 16:34:19 <CIA-44> freesmartphone.org: Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de>
Oct 02 16:44:12 <pa4wdh> zear: It does exist on opkg.org, are your network settings ok ?
Oct 02 16:44:23 <zear> pa4wdh, it looks like that file is corrupted
Oct 02 16:44:56 <zear> it's only 4KB, is that a valid size?
Oct 02 16:45:14 <zear> my network settings i fine, i can install other packages from opkg.org without problems
Oct 02 16:45:14 <pa4wdh> zear: Can you try to download it using wget ?
Oct 02 16:45:19 <zear> yes
Oct 02 16:45:36 <zear> and i'm still getting the same error when i'm trying to install it from a local package
Oct 02 16:46:10 <zear> hmm:
Oct 02 16:46:11 <zear> playstankontakarta_0.3_any.ipk	10-Jan-2009 16:16 	19K
Oct 02 16:46:11 <zear> 	playstankontakarta_0.4_any.ipk	01-May-2009 04:03 	4.0K
Oct 02 16:46:20 <zear> it looks like that file is corrupted
Oct 02 16:47:09 <zear> oh, and btw, can i ask a stupid question?
Oct 02 16:47:29 <pa4wdh> zear: Indeed, if i try to decompress it with gzip it give an error "unexpected end of file" ...
Oct 02 16:48:40 <pa4wdh> zear: Go ahead :-)
Oct 02 16:49:15 <zear> i use SHR, and i can't make calls to special numbers, that is every number that starts with *
Oct 02 16:50:11 <pa4wdh> zear: I don't use SHR. but it sounds famliar ...
Oct 02 16:50:31 <zear> it's quite critical, as i need to call a number with * for my prepaid activation
Oct 02 16:50:51 <zear> sure i could do it from another phone, but i want to acomplish it on fr :D
Oct 02 16:51:39 <zear> i guess it could be done by manually sending an AT modem command, but i know nothing about that
Oct 02 16:52:00 <pa4wdh> zear: :-) Try to find some hints on the web, i don't know
Oct 02 16:52:29 <zear> yeah, found just one, and it doesn't help much
Oct 02 16:52:36 <zear> http://docs.openmoko.org/trac/ticket/1832
Oct 02 16:52:37 <pa4wdh> zear: AT Commands are quite well described, so could be the best solution :-)
Oct 02 16:53:29 <pa4wdh> zear: There is a fix listed in the ticket, you could try that
Oct 02 16:54:56 <zear> i'm either retarded, or confused, because i don't see it ;)
Oct 02 16:57:11 <pa4wdh> There are two links in the ticket. However i seem to have trouble opening them. Don't know it it's personal :-)
Oct 02 16:57:23 <zear> yeah, they don't work for me either
Oct 02 16:57:37 <zear> so i thought you were talking about some other fix
Oct 02 16:58:38 <pa4wdh> zear: No, Sometimes it's just slow but you'll get the page (i was just lucky with an othr page)
Oct 02 16:59:39 <pa4wdh> I'll have to go, good luck, see you later
Oct 02 16:59:48 <zear> thanks for help
Oct 02 17:21:50 <zear> ok, i've read about AT commands, looks like AT+CUSD=1,"*101#",15 is the right command
Oct 02 17:22:18 <zear> but when i'm trying to execute it via mickeyterm, i'm getting "ERROR"
Oct 02 17:22:41 <zear> and number that starts with * gives me ERROR in mickeyterm
Oct 02 17:22:49 <zear> looks like my modem wont accept * numbers at all
Oct 02 18:24:10 <PBeck> hi
Oct 02 18:33:48 <Guest45429> how can you make kernel smaller then 2 mb while cross-compiling?
Oct 02 18:33:56 <Guest45429> i cant manage to make it smaller then 2.3 mb
Oct 02 20:17:56 <johnq> I'm having problems using GPS. RequestResource("GPS") tells me that the resource had never been registered. Which process normally registers it?
Oct 02 20:22:21 <johnq> Ah, the framework logfile tells me that it wants to write to some sysfile called "pwron" but there is only a file called "power_on".
Oct 02 20:22:25 <johnq> Is this bug known?
Oct 02 20:25:02 <johnq> ok, after echoing 1 to the power_on-file, i get messages from /dev/ttySAC1, but fso-gpsd still reports that the GPS device is not there.
Oct 02 20:41:08 <UberNeo> how to remove duke3d game ..i just want to remove it
Oct 02 20:41:25 <UberNeo> opkg remove duke3d doesnt do anything
Oct 02 20:42:27 <zear> opkg list_installed | grep duke
Oct 02 20:42:35 <zear> and it should find the exact name of that application
Oct 02 20:45:07 <PaulFertser> johnq: fso writes to both pwron and power_on just in case, not a bug, not an issue
Oct 02 20:45:27 <PaulFertser> Guest45429: by compiling some stuff as modules obviously
Oct 02 20:45:40 <UberNeo> opkg list_installed | grep duke ..doesnt return anything
Oct 02 20:45:58 <zear> PaulFertser, any idea why i can't call *101#, even directly via AT shell?
Oct 02 20:46:06 <zear> (SHR unstable)
Oct 02 20:46:14 <PaulFertser> Guest45429: packaging defconfig already does that fyi
Oct 02 20:46:36 <zear> UberNeo, looks like it was removed
Oct 02 20:46:47 <zear> maybe you need to reboot the system so the icon is gone?
Oct 02 20:47:03 <PaulFertser> zear: shr does support USSD out of the box
Oct 02 20:47:19 <zear> parmaster, so i should be able to call * numbers via gui?
Oct 02 20:47:27 <UberNeo> but the icon is still there on the screen ..and when i am starting it ..its showing a yellow screen of death
Oct 02 20:47:28 <zear> * PaulFertser, 
Oct 02 20:47:54 <PaulFertser> zear: yes it works for me
Oct 02 20:48:06 <zear> PaulFertser, does not, and never worked in any distro for me
Oct 02 20:48:13 <zear> looks like a modem issue then
Oct 02 20:48:42 <zear> poor luck
Oct 02 20:48:44 <PaulFertser> zear: i doubt that. BTW, i just dialed *102# in SHR dialer and got a USSD reply.
Oct 02 20:49:11 <zear> the gprs runs fine, and if i'm not mistaken, it uses the *99#
Oct 02 20:49:16 <PaulFertser> zear: this works as well: mdbus -s org.freesmartphone.ogsmd /org/freesmartphone/GSM/Device org.freesmartphone.GSM.Network.SendUssdRequest "*102#"
Oct 02 20:49:22 <UberNeo> *zear*
Oct 02 20:49:26 <PaulFertser> zear: gprs has nothing to do with ussd
Oct 02 20:51:12 <zear> UberNeo, sorry, no idea
Oct 02 20:51:30 <UberNeo> PaulFester can u help
Oct 02 20:51:52 <PaulFertser> UberNeo: with removing duke?
Oct 02 20:51:58 <UberNeo> yepp
Oct 02 20:52:06 <PaulFertser> UberNeo: what does opkg remove say?
Oct 02 20:52:47 <UberNeo> No Packages Removed 
Oct 02 20:52:57 <UberNeo> opkg remove duke3d
Oct 02 20:53:01 <johnq> PaulFertser: thanks!
Oct 02 20:53:04 <PaulFertser> UberNeo: how did you install the package?
Oct 02 20:53:22 <UberNeo> opkg install and a long weblink.ipk
Oct 02 20:53:24 <johnq> PaulFertser: Somehow ogpsd works again, no idea where the problem was.
Oct 02 20:53:40 <PaulFertser> johnq: fyi fso-gpsd is a compatibility wrapper that communicates with FSO to provide (somewhat) gpsd-compatible interface.
Oct 02 20:54:05 <PaulFertser> UberNeo: do you still see the package among list_installed?
Oct 02 20:54:46 <UberNeo> no i gave opkg list_installed | grep duke  ..this also dowsn't return anything
Oct 02 20:56:02 <johnq> PaulFertser: should I use the gps module in a new python app or rather just dbus calls?
Oct 02 20:56:23 <PaulFertser> UberNeo: you can use some opkg command (i do not remember it) to find which package owns a file and give it the full path to duke icon.
Oct 02 20:57:14 <PaulFertser> johnq: FSO provides Gypsy Dbus api for gps apps. If you're ok with that, use it directly. If you need compatibility with gpsd, use fso-gpsd.
Oct 02 20:58:23 <zear> PaulFertser, http://pastebin.com/m4f93a3d
Oct 02 20:58:40 <zear> my sim is working, just had a call and it's fine
Oct 02 20:59:32 <PaulFertser> zear: sim working != sim ready.
Oct 02 21:00:02 <PaulFertser> zear: sim ready most probably means it is fully operational (usually you can tell that by a possibility to read contacts/messages from it).
Oct 02 21:00:32 <johnq> PaulFertser: Is gypsy via dbus faster or the gps module?
Oct 02 21:01:28 <zear> i just bought my prepaid, haven't "charged" (for a lack of a better word) it yet with a right value of money
Oct 02 21:01:31 <Jebz> 2You are an nerd! But now show everybody how much nerd you are! How many words can you type in 30 seconds? Check out here http://thetypegame.com
Oct 02 21:01:50 <zear> but i have some cash on the account as a bonus on start
Oct 02 21:01:54 <zear> could this be an issue?
Oct 02 21:02:11 <zear> basicly, to charge my account, i need to perform another * call
Oct 02 21:02:23 <PaulFertser> zear: CME 100 means "Antenna powered off or SIM not unlocked yet" 
Oct 02 21:02:58 <PaulFertser> johnq: gypsy should be a bit faster because it omits fso-gpsd from data path.
Oct 02 21:03:12 <johnq> PaulFertser: ok thanks
Oct 02 21:03:27 <zear> PaulFertser, should i reboot and retry?
Oct 02 21:03:35 <PaulFertser> zear: have you entered the pin?
Oct 02 21:03:40 <zear> yes, of course
Oct 02 21:03:45 <zear> as i said, i had a call
Oct 02 21:03:51 <zear> so the sim is working
Oct 02 21:03:55 <zear> so is the antenna
Oct 02 21:04:44 <PaulFertser> zear: hm, probably you enter a wrong ussd request then. I'm really out of ideas, it's very strange. Probably you might want to restart ophonekitd to give it another try.
Oct 02 21:05:20 <zear> i'm gonna reboot the whole thing
Oct 02 21:05:35 <max_posedon> Which speed is maximum for FR for copying via wifi files from uSD?
Oct 02 21:05:36 <zear> but as i say, * call were never working for me
Oct 02 21:05:46 <zear> on sereval distros, different sim cards
Oct 02 21:06:05 <PaulFertser> zear: do you have the lastest GSM firmware?
Oct 02 21:06:09 <max_posedon> for some reason I have only 260KB/s, and cpu usage is 100
Oct 02 21:06:19 <zear> PaulFertser, nope, some older version
Oct 02 21:06:28 <PaulFertser> zear: until you upgrade i'm not talking with you ;)
Oct 02 21:06:33 <zear> the one that fr was shipped with
Oct 02 21:06:50 <zear> PaulFertser, uh, oh, upgrading a modem is a serious task
Oct 02 21:06:53 <zear> i can brick it
Oct 02 21:06:58 <PaulFertser> zear: NO
Oct 02 21:07:00 <zear> and i'm good at bricking ;)
Oct 02 21:07:09 <PaulFertser> zear: as said many-many times you can't brick the modem at all
Oct 02 21:07:19 <zear> oh, that's good to hear
Oct 02 21:07:27 <PaulFertser> zear: you can render it useless but you need to seriously hack some files for that
Oct 02 21:07:45 <zear> can you guys assist me while i'm doing it? i don't want to screw anything up
Oct 02 21:07:50 <PaulFertser> max_posedon: have you tried to pass some dummy data instead of files from SD?
Oct 02 21:07:52 <zear> even if it's all in the wiki
Oct 02 21:08:01 <PaulFertser> zear: use the uSD image then
Oct 02 21:08:18 <zear> PaulFertser, will that change anything?
Oct 02 21:08:21 <max_posedon> PaulFertser, nope
Oct 02 21:08:33 <zear> i don't see how uSD is related to modem upgrade ;)
Oct 02 21:09:22 <max_posedon> but now I have loadavg near 3, sshd 30% cpu, ar6000_io 20% cpu, events/0 10% cpu 
Oct 02 21:09:31 <PaulFertser> zear: you just boot from a carefully crafted (by experts) uSD image and it does everything for you.
Oct 02 21:09:51 <max_posedon> user 20, sys 50, si(don't know what it is in top 30)
Oct 02 21:09:58 <zear> ah, ok, i guess i'll do it so then
Oct 02 21:10:59 <max_posedon> ok, anyway I don't have time for tests, but its makes me cry little bit
Oct 02 21:11:04 <PaulFertser> max_posedon: can you try to isolate it (by testing only wireless performance)?
Oct 02 21:11:14 <PaulFertser> max_posedon: try the maxperf trick
Oct 02 21:11:26 <max_posedon> will try in 10mins
Oct 02 21:11:52 <PaulFertser> max_posedon: maxperf you can try now, it won't harm
Oct 02 21:12:13 <max_posedon> I switched phone off to extract uSD
Oct 02 21:12:17 <PaulFertser> Heh
Oct 02 21:14:39 <max_posedon> ok, other uSD attached(default) for testing
Oct 02 21:37:07 <max_posedon> PaulFertser, so, copying from neo's ram still very low
Oct 02 21:37:17 <max_posedon> how to enable maxperf?
Oct 02 21:37:28 <PaulFertser> max_posedon: wmiconfig -i eth0 --power=maxperf
Oct 02 21:39:22 <max_posedon> still very slow, now 125KB/s
Oct 02 21:39:47 <PaulFertser> Worse than before?
Oct 02 21:40:15 <max_posedon> worse then before reboot
Oct 02 21:40:16 <PaulFertser> max_posedon: Werner did some tests, you can try to search kernel ML archive.
Oct 02 21:40:22 <max_posedon> same as before maxperf
Oct 02 21:40:42 <PaulFertser> max_posedon: probably another fuckup of ar6000 firmware.
Oct 02 21:41:10 <PaulFertser> max_posedon: try with another AP.
Oct 02 21:41:15 <max_posedon> may be it because my wifi at home busy now
Oct 02 21:41:17 <max_posedon> but still very strange
Oct 02 21:41:32 <max_posedon> easy to say, hard to implement
Oct 02 21:41:47 <max_posedon> ad-hoc with iphone also gaved me near same speed
Oct 02 21:41:57 <max_posedon> (when I did tests)
Oct 02 21:47:38 <max_posedon> (retry with empty wifi)
Oct 02 21:47:42 <max_posedon> 280KB/s
Oct 02 21:47:56 <max_posedon> and I see that sshd eats 50%cpu
Oct 02 21:48:07 <max_posedon> so, may be sshfs is too heavy
Oct 02 21:54:38 <PaulFertser> max_posedon: sometimes changing channel AP operates on might be also interesting/beneficial.
Oct 02 21:56:02 <zear> uh, openmoko.org doesn't work for me.. is there any mirror of flash-moko11_uSD-image.tar.gz?
Oct 02 22:00:56 <max_posedon> ok, I'll try next time, but signal level is good enough
Oct 02 22:40:09 <roh> hm.. rebooting chandra
Oct 02 22:46:22 <roh> works again.
Oct 03 01:53:44 <DocScrutinizer> roh: chandra == openmoko.org  (?)
Oct 03 01:57:44 <DocScrutinizer> hmm
Oct 03 01:57:48 <DocScrutinizer> jr@halley:~/Desktop> host people.openmoko.org
Oct 03 01:57:49 <DocScrutinizer> people.openmoko.org is an alias for sita.openmoko.org.
Oct 03 01:57:51 <DocScrutinizer> sita.openmoko.org has address 88.198.124.203
Oct 03 01:58:25 <DocScrutinizer> hmm
Oct 03 01:58:28 <DocScrutinizer> jr@halley:~/Desktop> host chandra.openmoko.org
Oct 03 01:58:30 <DocScrutinizer> chandra.openmoko.org has address 88.198.23.49
**** ENDING LOGGING AT Sat Oct 03 02:59:57 2009