**** BEGIN LOGGING AT Mon May 24 02:59:57 2010 May 24 03:11:24 Hi May 24 07:43:41 hey, anyone using shr unstable on neo1973? May 24 07:44:00 the latest unstable full-om would not flash on but lite-om installed May 24 07:44:40 now taps on the screen are way off like it needs touchscreen calibrating May 24 07:48:25 bmidgley: look into /etc/X11/Xsession.d/89xTs_Calibrate_xinput_calibrator May 24 07:49:07 and /usr/bin/xinput_calibrator_once.sh May 24 07:49:15 this might point you in the right direction May 24 07:49:30 zub, I am not getting the cdc ether device when I plug in... not sure how to get at those things May 24 07:49:41 booted from internal flash not sd May 24 07:50:10 bmidgley: i think the folks had better experience using SD, internal flash is way too limited in space. May 24 07:50:56 PaulFertser, ok will give that a whack, thx May 24 07:51:09 bmidgley: the cdc device should appear automatically, if it doesn't, there's probably some problem with configuration. If you used SD, you could have plugged it in your laptop/pc and just add "modprobe g_ether" to some bootscript to at least get usb networking going. May 24 08:37:25 PaulFertser what does your bootcmd look like for shr on sd? May 24 08:37:44 * thrashold is away: Gather your rosebuds while ye may... May 24 08:37:45 bmidgley: oh, my gta01 is at home... May 24 08:37:54 heh, ok May 24 08:38:04 * thrashold is back (gone 00:00:00) May 24 08:38:10 anyway, the old bootcmd that worked with debian is unable to find root fs May 24 08:38:46 bmidgley: do you use single partition on your SD? May 24 08:39:04 it has two partitions, is that not ideal May 24 08:39:13 thrashold: probably you want to disable sending auto-away messages, some chanops do not accept that. May 24 08:40:06 bmidgley: probably it's ok. BTW, since you flashed the kernel already, you can ask u-boot to fetch it from NAND, and to use root=/dev/mmcblk0p1 May 24 08:40:53 I couldn't find instructions for putting shr on sd, I'm guessing and using the debian setup May 24 08:40:56 not that great May 24 08:41:53 bmidgley: u-boot has a nice manual on its official site... May 24 09:31:23 is it possible to activate a sms notice of receipt or is this feature not implemented in shr-u/fso ? May 24 09:32:16 for the last days i use my freerunner as my primary phone and this is one feature i'm missing at the moment. all the rest seems to work quite good until now :) May 24 09:34:49 Fox_Muldr: it's implemented but there's no good UI to it. May 24 09:35:18 ah ok, so i have to wait until it is implemented in the ui :) May 24 09:36:10 Fox_Muldr: you can use/modify slightly opimd-messages python script. May 24 09:37:20 hmm i never programed python so i'm not familiar with this language May 24 09:38:18 but if it is only a minor modification to the opimd-messages python script i wonder why no one else has made it yet. seems nobody missed this feature :) May 24 09:38:41 Fox_Muldr: you can try to ask dos1 about it. May 24 09:40:26 ok, if May 24 09:40:35 i see him i will try to ask him May 24 09:42:49 but i'm quite happy at the moment because current shr-u works really great as main phone May 24 10:13:27 radekp: hey. I'm not sure about the details but probably there're some registers that are not initialized quite right in the NOR u-boot, and the kernel never touches those. Probably that leads to an increased power consumption. May 24 10:15:16 radekp: btw, i always used root on SD and pulled the battery quite some times, never experienced any major corruption (having ext3). May 24 10:25:45 PaulFertser: hi, it ocurred to me several times that debian was running fsck and later i could not even boot May 24 10:27:06 PaulFertser: but i cant remeber if it happened even with old SandDisk 4GB - i was using it for quite long time and it was working really well May 24 10:27:39 PaulFertser: now i have 16GB sd card and i think few batter pulls can kill it May 24 10:34:00 radekp: 8Gb card here, never had any problems May 24 10:34:39 PaulFertser: btw do you use ext2 or ext3? May 24 10:34:52 radekp: ext3 May 24 10:35:19 * radekp too May 24 10:35:56 could it be that there is a little problem with application .desktop files with illume2? as soon as i remove an .desktop file from /usr/share/applications and refresh the desktop the icon disappears and i got an 0000.desktop symbol which has no function. and when i try to add an own .desktop file it is not displayed at all :/ May 24 10:36:39 i wanted to use sqash fs for rootfs and ext3 as union on top of it, so that the core system is readonly May 24 10:36:47 but not sure how good is that idea May 24 11:34:01 could i somehow set which phone number/type should be displayed in the concact list in shr-u? at the moment it displays random numbers but not always the same type :/ May 24 11:36:26 i would like to see "mobile phone" displayed as primary type if it is set. if not than it should use some other phone type if any set May 24 13:59:05 is there a good howto on cross-compiling apps for the FR? May 24 14:02:11 badcloud: http://wiki.shr-project.org/trac/wiki/Building%20SHR May 24 14:02:53 JaMa: thanks, but does it matter that I use qtmoko? May 24 14:02:56 (debian) May 24 14:12:03 badcloud: yes.. lindi has few nice tutorials for cross-compiled debian packages, search his web May 24 14:12:28 .txts here http://lindi.iki.fi/lindi/openmoko/ May 24 21:28:30 watisit May 24 21:31:50 wassup Doc? May 24 21:31:59 any hardware news? May 24 21:37:06 doc do u have a openmkok beagle hybrid? May 24 21:37:32 "DocScrutinizer51 May 24 21:41:51 "DocScrutinizer51" :) May 24 22:20:09 slaxxer: that's RX-51 aka Nokia N900. Not far away from beagleboard **** ENDING LOGGING AT Tue May 25 02:59:57 2010