**** BEGIN LOGGING AT Sun Oct 17 02:59:58 2010 Oct 17 03:30:46 Hi all, Oct 17 03:32:25 I have a question about u-boot in freerunner Oct 17 03:32:48 is u-boot in NOR or Nand ? Oct 17 03:33:38 both, by default Oct 17 03:37:03 ok, I use /dev/ttyACM0 to connect to U-boot in NOR. how can I connect to Nand U-boot ? Oct 17 03:40:33 debug board, iirc Oct 17 03:42:08 There is no clear information in the wiki about distinguishing accessing to U-boot in the NOR and Nand. Oct 17 03:44:05 I'm installing a distro for the first time on Freerunner but I'm trying to boot it with no success. Oct 17 03:44:23 I installed it on uSD card. Oct 17 03:48:40 There is a broken link in the wiki, here http://wiki.openmoko.org/wiki/Booting_from_SD#Add_uboot_boot_entry Oct 17 03:49:52 I need information about booting from sd using u-boot. Oct 17 03:51:22 Kamping_Kaiser: Do you have an idea about what time I can find a few members to help me in this issue ? Oct 17 03:51:56 Waraqa: another 6-8 hours probably Oct 17 03:52:49 Kamping_Kaiser: Ok, Thanks Oct 17 03:53:05 good bye Oct 17 03:53:35 Waraqa: gl Oct 17 15:52:42 hi Oct 17 15:53:11 <[Rui]> hi Oct 17 15:53:17 hi Oct 17 15:53:37 i am using dfu-til to flash my neo freerunner and i get an error when i try to backup it. is there a table of the error codes somewhere? Oct 17 15:53:57 becki: well Oct 17 15:54:07 becki: backing up was working unreliably. Oct 17 15:54:20 becki: e.g. the NOR u-boot is not capable of it at all. Oct 17 15:54:34 becki: if you have something to back up, boot the device, and do it over usb. Oct 17 15:54:46 the kernel-backup worked but not the rootfs. Oct 17 15:54:52 okay, then i'll do that Oct 17 15:54:53 you can do it with mkfs-jffs2 in shr-u :) Oct 17 15:55:12 I've done it several times using this in neo and neotool on PC Oct 17 15:55:38 pespin: okay. thanks i'll look for it at the wiki. Oct 17 15:55:55 PaulFertser: thanks. if the other option fails i'll backup using usb Oct 17 15:56:16 becki, if you are using shr: just opkg install mkfs-jffs2. Oct 17 15:56:34 then on you PC, download neotool from wiki, run it, configure it and press backup button ;) Oct 17 15:56:48 pespin: i'm using qtmoko. so i'll first look if i can geht it work here Oct 17 15:56:52 pespin: hehe thanks Oct 17 15:57:04 yw :) Oct 17 17:19:32 openmoko **** ENDING LOGGING AT Mon Oct 18 02:59:57 2010