**** BEGIN LOGGING AT Sat May 14 02:59:59 2011 May 14 15:00:54 hi May 14 16:19:38 hello out there, I just installed SHR on my microSD card. one partition ext2 with the kernel image I got from here: http://build.shr-project.org/shr-testing/images/om-gta02/ May 14 16:20:30 and the filesystem on the second partition with a ext3 fs . I took full-om-gta02.tar.gz May 14 16:21:01 but I get only a "unable to read "uImage.bin" from mmc 1:1 May 14 16:21:21 what did I missed? May 14 16:27:00 tokstolle: which bootloader do you use? May 14 16:27:03 qi or uboot May 14 16:27:26 with uboot the first partition has to be FAT May 14 16:27:45 with Qi everything should be on 1 ext2/3 partition May 14 16:32:42 Heinervdm: thats interesting. I thought I installed qi, and I did it, but without overwriting uBoot. Im not sure what's really installed now May 14 16:33:21 fact is, if I press the AUX and the Power button, I get an uBoot-menu May 14 16:34:14 if I boot from flash, qi is loaded and this loads qtmoko May 14 16:35:21 I thougt that uBoot also accepts ext2 for the kernel partition? May 14 16:37:00 correction: if just press the power button uBoot boots qtmoko. this bizarre, because I installed qi weeks ago!!??? May 14 16:45:27 now I created a vfat on my first partition but is the same problem May 14 16:58:40 tokstolle: you have 2 bootloaders one in NAND and one in NOR May 14 16:59:46 you can only overwrite the one in NAND May 14 17:39:09 its definitly uBoot. and I made some advantiges. It can read the kernel now, but stops by syncing the fs or/and cannot read the init May 14 17:39:32 "kernel panic not syncing No init found May 14 18:46:51 so..I have a 1973 here, and I'm feeling guilty for not having anything good to do with it :/ May 14 18:47:14 "" May 14 18:47:30 what about a the modules I see at http://build.shr-project.org/shr-testing/images/om-gta02/ May 14 18:47:30 I had planned to use it as a microwave oven controller - but that project has stalled. May 14 18:47:40 heh May 14 18:47:54 SpeedEvil: not having wifi really limits it's usability as...anything May 14 18:48:11 Also there are USB wifi cards now that are small enough to be fitted internally. May 14 18:48:49 Get a GPS chip antenna, remove the large GPS antenna, place guts of wifi dongle in there, wire into the bluetooth attachment, with a leetle hub chip. May 14 18:54:20 heh, that's a lot of work for a 266 Mhz device :P May 14 18:54:27 I'd rather pimp out my n900 in that case :P May 14 19:44:25 Indeed. **** ENDING LOGGING AT Sun May 15 02:59:58 2011