**** BEGIN LOGGING AT Thu Jul 23 02:59:57 2009 Jul 23 13:00:34 Hi @all. Does anybody know if there is PCI support for marvell git u-boot (on openrd-base board)? Jul 23 13:00:42 Any hints / links are welcome ;-) Jul 23 13:33:31 rabeeh: You got my email about the patches for fw_*env? I wonder whether what you got is upstreamable Jul 23 14:58:24 dieter_: I thought there was a scan pci function in u-boot. Jul 23 15:00:08 tinker-f595: yes - there is one in 1.1.4 but PCI isn't supported in marvell git u-boot. Jul 23 15:00:14 my system is off at the momemt Jul 23 15:00:42 so could not check...and not looking at git before I drink my morning coffee Jul 23 15:01:07 Ah, I'm short before my evening beer ;-) Jul 23 15:01:15 dieter_: have you played with the sata ports yet Jul 23 15:01:32 no beer for me for a few more days. Jul 23 15:01:38 tinker-f595: yes - connected a harddisk and runs as expected out of the box. Jul 23 15:02:15 I am trying to decide which hardrive to get for my my OpenRD Client. Jul 23 15:02:19 tinker-f595: bad retrospection? ;) Jul 23 15:02:33 ? Jul 23 15:02:45 tinker-f595: no beer... Jul 23 15:03:09 tinker-f595: I thought you've maybe one too much in the past few days? Jul 23 15:03:17 no, injury...hence analgesics which react badly with beer Jul 23 15:03:44 tinker-f595: oh, sorry to hear that! Get well soon! Jul 23 15:04:37 that is why I have not had the energy to finish putting the web server and beginnings of a forum together Jul 23 15:04:54 tinker-f595: but I've tested sata only with precompiled 2.6.22 kernel on openrd. Jul 23 15:04:59 Ah, I see. Jul 23 15:05:36 so t is real SATA 2 ? Jul 23 15:06:06 tinker-f595: Hm, I don't know exactly if it's SATA2 - but my 2.5" laptop drive works well. Jul 23 15:06:18 some of the SATA2 drives do not work well in SATA1 mode that is why I ask Jul 23 15:06:19 tinker-f595: let me have a quick look at the specs... Jul 23 15:08:17 tinker-f595: The spec say it is a SATA 2.0 interface Jul 23 15:08:57 dieter_: I guess I will find out when I test it. Jul 23 15:09:06 dieter_: if it really is Jul 23 15:09:16 tinker-f595: and also the kirkwood datasheet talks about a SATA-II phase 1.0 port Jul 23 15:09:26 tinker-f595: so it really looks like a SATA-II port ;-) Jul 23 15:09:44 "phase 1.0 port"? Jul 23 15:10:50 tinker-f595: yes - so is the writing in the kirkwood functional specification. Jul 23 15:11:19 tinker-f595: It's time to go home - very hot today :-) Jul 23 15:11:44 hmmm I am going to look at http://www.serialata.org/ and see if it mentions that phrase Jul 23 15:11:56 define very hot please Jul 23 15:12:10 tinker-f595: do you have the functional datasheet? I think you can get it at openplug.org. Jul 23 15:12:40 Bye! Jul 23 15:12:44 I have the functional data sheet on one of my systems Jul 23 15:12:49 bye Jul 23 20:25:20 is the default sheeva kernel able to mount ext2/ext3 rootfs from usb? Jul 23 20:25:38 all I get is VFS: Cannot open root device "sda1" or unknown-block(8,1) Jul 23 20:25:40 :/ Jul 24 00:02:05 anyone here booting off of USB? Jul 24 00:11:48 I managed to boot the kernel off of usb Jul 24 00:12:16 but I didn't get as far as convinving kernel to mount / from usb Jul 24 00:13:14 I can't get anything to work from USB Jul 24 00:13:20 ShadowJK, you using ext2load? Jul 24 00:13:31 I just posted this ... http://plugcomputer.org/plugforum/index.php?topic=517.0 Jul 24 00:13:43 yeah I'm using ext2load Jul 24 00:14:46 ShadowJK, are you using the stock u-boot? Jul 24 00:14:58 yep Jul 24 00:18:44 are you using a usb hub? Jul 24 00:19:01 no hub Jul 24 00:19:05 just directly in **** ENDING LOGGING AT Fri Jul 24 02:59:57 2009