**** BEGIN LOGGING AT Tue Aug 18 02:59:56 2009 Aug 18 17:06:46 anyone here that can help with a bricked plugpc? Aug 18 17:13:30 what kind of help you do need? Aug 18 17:14:15 If you have x86 linux PC, you can use openocd and usb cable to reflash the plug's firmware. Aug 18 17:16:59 I was trying to use the usb section at Ubuntu Jaunty 9.04 Network Install and it either gets a can't load root fs with one of my uImage files or just hangs on booting the kernel with 3 uImages from Marvell and here Aug 18 17:17:20 is there directions for the opencd somewhere? Aug 18 17:19:37 basically I replaced the uImage with my own and now it errors out saying it can't mount root on unknown block(31,1) Aug 18 17:20:34 some other data is there as well. mostly in hex if anyone wants to look at it Aug 18 17:36:51 I found this is somewhat easy to use. Aug 18 17:36:53 http://www.openplug.org/plugwiki/index.php/SheevaPlug_Installer Aug 18 17:37:16 If you can get pass the usb driver for openocd ..... Aug 18 17:39:18 what I am understanding about that is you need to actually be able to boot to something to run that script. Aug 18 17:39:45 Is there anyway to run it from marvell prompt? Aug 18 17:40:33 or instructions for booting from a usb where I can run it Aug 18 17:41:09 I seem to remember instructions somewhere for booting from usb about 4 months ago, but I can't seem to find it now Aug 18 17:49:36 http://www.plugcomputer.org/plugwiki/index.php/Das_U-boot_plug_support Aug 19 02:11:46 ralyon76: you do not have to be able to boot the sheevaplug to be able to use the installer **** ENDING LOGGING AT Wed Aug 19 02:59:56 2009