**** BEGIN LOGGING AT Wed Nov 25 02:59:57 2009 **** ENDING LOGGING AT Wed Nov 25 03:35:07 2009 **** BEGIN LOGGING AT Wed Nov 25 03:35:39 2009 Nov 26 01:59:15 the sd card reader isn't working for me Nov 26 02:00:29 Nov 26 01:59:51 plug kernel: mmc0: card 1234 removed Nov 26 02:00:29 Nov 26 02:00:04 plug kernel: mmc0: host does not support reading read-only switch. assuming write-enable. Nov 26 02:00:29 Nov 26 02:00:04 plug kernel: mmc0: new high speed SD card at address 1234 Nov 26 02:00:29 Nov 26 02:00:04 plug kernel: mmcblk0: mmc0:1234 SD01G 972 MiB Nov 26 02:00:29 Nov 26 02:00:04 plug kernel: mmcblk0: p1 Nov 26 02:00:30 Nov 26 02:00:09 plug kernel: mmc0: unhandled error status 0x800 Nov 26 02:00:32 Nov 26 02:00:09 plug kernel: mmcblk0: retrying using single block read Nov 26 02:00:34 Nov 26 02:00:09 plug kernel: mmcblk0: error -110 sending status comand Nov 26 02:00:36 Nov 26 02:00:09 plug kernel: mmcblk0: error -110 sending read/write command, response 0x900, card status 0x900 Nov 26 02:00:39 Nov 26 02:00:09 plug kernel: end_request: I/O error, dev mmcblk0, sector 32 Nov 26 02:00:41 Nov 26 02:00:09 plug kernel: mmc0: unhandled error status 0x800 Nov 26 02:00:43 Nov 26 02:00:09 plug kernel: mmcblk0: error -110 sending status comand Nov 26 02:00:45 Nov 26 02:00:09 plug kernel: mmcblk0: error -42 sending read/write command, response 0x900, card status 0x900 Nov 26 02:00:48 Nov 26 02:00:09 plug kernel: end_request: I/O error, dev mmcblk0, sector 33 Nov 26 02:00:52 Nov 26 02:00:09 plug kernel: mmcblk0: error -110 sending status comand Nov 26 02:00:54 etc **** ENDING LOGGING AT Thu Nov 26 02:59:56 2009