**** BEGIN LOGGING AT Sat Oct 02 02:59:57 2010 Oct 02 06:07:20 noidea, Oct 02 06:11:44 yea Oct 02 06:12:02 Bryanstein: ? Oct 02 17:10:04 hm, how can I found out what address to use to load my own kernel from mmc Oct 02 17:33:53 Have any of you tried out Amahi? Likes/Dislikes? Oct 02 17:43:44 mmc? Oct 02 17:43:53 mmc has no "addresses", it has partitions Oct 02 17:44:12 SDs are "perfect" block devices, unlike raw NANDs Oct 02 18:00:30 kerio: the address where to load in ram Oct 02 18:00:31 i do Oct 02 18:00:41 ext2load mmc 0 0x800000 /uImage Oct 02 18:00:54 Thell: "meh" Oct 02 18:00:56 that loads but stalls after uncompressing the kernel Oct 02 18:01:09 it's good if you have a lan full of macs i guess Oct 02 18:01:10 but i feel the 0x8000000 is not ok Oct 02 18:01:24 i think you should use 0x800000 Oct 02 18:01:36 or it can't find the root Oct 02 18:02:08 found at another place 0x200000 or so Oct 02 18:02:17 try 0x640000 Oct 02 18:02:39 it really shouldn't matter too much were you put it Oct 02 18:04:29 Tootoot222: thanks will try it in a few mins (grab some coffee first) Oct 02 18:12:33 kerio: 'meh' because you'd rather do your own, or 'meh' because of their implementation? Oct 02 18:12:45 no, "meh" because i tried it and it's "meh" Oct 02 18:13:03 not avahi, the idea behind zeroconf/rendezvous/bonjour Oct 02 18:14:07 lol, not avahi, amahi home server. Oct 02 18:14:20 amahi.org Oct 02 18:14:26 ooh Oct 02 18:14:30 lol kerio Oct 02 18:14:49 avahi is more useful Oct 02 18:14:50 :< Oct 02 18:15:18 :P Oct 02 18:15:35 =) Oct 02 18:15:38 it requires fedora :| Oct 02 18:18:40 anyway, looks like a cute solution for file sharing Oct 02 18:19:07 yeah, not sure of the overall usefullness yet. Just cloned it to take a lok Oct 02 18:19:10 look Oct 02 18:24:26 btw, if it needs avahi then my point still stands Oct 02 18:24:39 lol Oct 02 18:25:23 it does! Oct 02 18:31:27 kerio: Tootoot222, got it working made a typo in console arg :-D Oct 02 18:49:12 eFfeM: lol Oct 02 23:16:00 my sheevaplug's usb is acting up :( Oct 02 23:16:21 ShadowJK: what do you mean by acting up? Oct 02 23:16:30 devices "disconnecting" Oct 02 23:17:02 usb 1-1.3: reset high speed USB device using orion-ehci and address 10 Oct 02 23:17:02 usb 1-1.3: device descriptor read/8, error -110 Oct 02 23:17:24 hub 1-1:1.0: unable to enumerate USB device on port 3 Oct 02 23:17:32 what type of usb device? Oct 02 23:17:42 flash disk Oct 02 23:18:02 Sandisk Cruzer Oct 02 23:18:06 yuch Oct 02 23:18:58 have you used that particular Sandisk Cruzer successfully in the past? Oct 02 23:19:34 yes Oct 02 23:20:45 Did you use the tool from sandisk to remove the U3 partition? Oct 02 23:21:51 no Oct 02 23:22:05 I don't think there ever was one on this Oct 02 23:22:19 My other sandisk usb drive has a virtual cdrom thing Oct 02 23:22:22 but this one doesn't Oct 02 23:22:46 the U3 partition is not linux friendly and cause headaches Oct 02 23:27:57 ShadowJK: have you checked the contacts on the drive and in the socket? Oct 02 23:28:15 just dd'd the entire drive on my desktop pc Oct 02 23:36:42 be interesting to see if it improves Oct 02 23:41:42 improves with what? Oct 03 00:27:00 dd copy from usb disk to PC, copy from PC to usb disk, sha1sum of both, matches... Oct 03 00:27:15 and sheeva just randomly fails :/ Oct 03 00:27:16 * ShadowJK sighs Oct 03 00:27:37 ShadowJK: does the same dd test not work on the sheeva? Oct 03 00:27:56 when does the error occour btw? Oct 03 00:28:09 after a long time of being on, or does it happen instantly when you plug the device in? Oct 03 00:29:01 It happened after being on for a day. I unplugged it and then plugged it back in. It failed in <3s again. I plugged it into PC and it worked ok. Oct 03 00:29:14 Now doing sha1sum /dev/device on sheeva, and it's working so far Oct 03 00:39:46 .. sha1sum test on sheeva passed Oct 03 00:45:44 I wish stuff would properly break Oct 03 00:45:51 and not be in eternal state of half-working Oct 03 00:46:51 lol Oct 03 00:47:03 i've been having a seemingly similar problem with my sheeva Oct 03 00:47:12 i got a new 2tb external drive (powered) Oct 03 00:47:17 and it disconnects randomly Oct 03 00:47:39 i thought that it was going into a 'sleep' mode, but i setup a cronjob to read and write to the disk every 10 minutes Oct 03 00:47:42 and it still happened Oct 03 00:47:53 then it stared happening /while/ i was logged on and using it **** ENDING LOGGING AT Sun Oct 03 02:59:57 2010