**** BEGIN LOGGING AT Sat Jan 01 02:59:58 2011 Jan 01 18:11:22 anyone experience with installing Debian on the Guruplug server? http://bzed.de/posts/2010/05/installing_debian_on_the_guruplug_server_plus/ - I did all as stated there, but upon rebooting it keeps running the debian isntaller again, instead of booting the installed Debian Jan 01 18:14:16 tjeerdnet: http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html Jan 01 18:18:23 comradekingu: that's for the sheevaplug though Jan 01 18:20:52 I´ve been busy for several evenings and tried all installation wiki´s, and I run evertime in a dead end..., I can manage to install u-boot, manage to install uImage, uInitrd et cetera, can even run the debian installer, but rebooting doesn´t startup from SD, although I am sure that the /, /boot are on dev/sda Jan 01 18:22:00 Also tried http://bzed.de/posts/2010/05/installing_debian_on_the_guruplug_server_plus/ Jan 01 18:24:09 login via serial console and see what its up to Jan 01 18:28:42 what it does now is after guruplug reboot relaunch the debian installer (loading kernel...etc and showing the install screen) Jan 01 18:30:32 there is only one thing which is in the bzed.de tutorial which doesn´t work in my case and that´s the ¨chroot /target /bin/bash¨ command Jan 01 18:31:26 when I am in the shell of the debian installer running that command gives me a: can´t change root directory to /target: No Such file or directory Jan 01 18:32:05 and that command seems necessary to move uI* images to the tftp-server? Jan 01 21:34:03 tjeerdnet: why don't you just use uImage? You know at boot time all the hardware in the guruplug. Jan 01 21:34:21 tinker: it is working already...finally Jan 01 21:34:35 I installed the U-boot from sheeva Jan 01 21:34:54 now that does not make sense Jan 01 21:35:09 and found out that actually SD is detected as USB device :s Jan 01 21:35:52 detected by what? Jan 01 21:36:02 so after I got Debian installed on the SD-card, I had to load it using `ext2load usb 0:1 /uImage´ and the same for uInitrd Jan 01 21:36:25 I saw on http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html that SD is being referred to as mmc 0:1 Jan 01 21:37:07 tjeerdnet: that is well documented. You would of seen that info at the plugcomputer wiki or openplug.org Jan 01 21:37:48 probably, but there is being referred to many wiki-pages and versions of how to install things Jan 01 21:39:06 but it comes in steps, I saw also different suggestions for U-boot around, where there also exists versions without ext2load in it... Jan 01 21:39:34 and some versions of u-boot didn´t even work Jan 01 21:40:23 well the plugwiki documents what works Jan 01 21:40:32 for the different plugs Jan 01 21:43:14 I did found it out in the end using the wiki´s... Jan 01 21:43:54 found=find **** ENDING LOGGING AT Sun Jan 02 02:59:58 2011