**** BEGIN LOGGING AT Sat Jan 05 02:59:57 2008 Jan 05 03:09:02 really? wow. that's amazin nabcore . i have yet to set up the serial console, b/c i'm getting my isp to look at my line (and put me back on fastpath), for some reason they put me on interleave with the speed bump, but margins/attenuation is still decent. wtf :S Jan 05 03:09:17 anyway, what's going on with WPA support? Jan 05 03:09:56 that would make it a total replacement for my stock firmware (although it's wpa_authenticator or perhaps driver seems borked, since i get wpa_supplicant disconnects in linux a LOT, and problems associating). Jan 05 03:11:58 WPA is not there yet... that will most likely require the acx-mac80211 version of the driver Jan 05 03:12:21 orkid; are you in the UK? Jan 05 03:14:05 no. canada Jan 05 03:14:20 why can't it work with the 'old' acx? Jan 05 03:15:12 OT: this is weird, my upload is around 80 steady, then a few hours in, it goes to 20k/sec or 10k/sec. ?!? cancel and restart, back to 80. i wonder why... Jan 05 03:15:59 not sure... the big plan is to use the mac80211 stack to carry out all that; but mac80211 is still very much WIP at the moment and master mode on the mac80211 really does not work. Jan 05 04:11:49 rwhitby * r10119 /trunk/target/linux/ixp4xx/patches-2.6.23/ (4 files): ixp4xx/fsg3: Added LEDs support, and refreshed patches for 2.6.23.12 Jan 05 04:33:54 Is curl missing a libncurses dependency? Jan 05 09:42:13 Kaloz: here ? Jan 05 10:32:15 exovii: yes Jan 05 10:32:26 Hi Kaloz : Jan 05 10:32:32 exovii? Jan 05 10:32:42 i started to do a patch to support fvx... Jan 05 10:33:06 ...but i'm not an expert and some things don't compile. Jan 05 10:33:29 At this time, it's about serial port initialization (in fvx538_setup.c) Jan 05 10:34:57 it's using the standard xscale uart, isn't it? Jan 05 10:35:26 Don't know that... Jan 05 10:36:33 fvx_538_setup.c calls the function 'early_serial_setup'. Jan 05 10:36:53 I found this function into include/linux/serial.h from the Netgear sources.... Jan 05 10:39:18 early serial has been merged into mainline, so you need normal serial support added to the boar dsetup dile Jan 05 10:40:13 you mean, same serial initialization as for the wg302 ? Jan 05 10:44:23 i don't know which uart does the fvs use, you have to figure that out if you started going on that road Jan 05 10:45:13 Will i find that in the official source code ? Jan 05 10:45:23 probably Jan 05 10:46:40 thanks Jan 05 15:12:57 Kaloz: here ? Jan 05 15:52:48 exovii: barely Jan 05 15:53:07 i see ! ;) Jan 05 15:53:45 Where could i find where are stored the different platform for kernel generation into bin dir ? Jan 05 15:54:14 I compile now, but i can't find a 'fvx538v1' kernel in the bin dir... Jan 05 16:00:50 in the bin directory, i got kernels for ap1000, avila, compex, ..., wg302v2, but not for my fvx... Jan 05 16:00:57 :sad: Jan 05 16:01:34 you have to make a patch, put it into the target patches directory, modify the kernel config - are these all done? Jan 05 16:01:56 the image/Makefile code is responsible for throwing stuff into bin/ Jan 05 16:03:06 for the moment, i just modified Makefile, Kconfig and added 2 files into build_dir/linux-ixp4xx_generic/linux-2.6.23-12 Jan 05 16:03:15 i have to do the patch Jan 05 16:03:26 ah ok, i thought you were further along Jan 05 16:03:53 i although have to modify config-default to have fvx538v1 ON Jan 05 16:04:05 thx nbd Jan 05 16:04:12 enfin, merci... Jan 05 16:59:58 i made a patch, located it into target/linux/ixp4xx/patches-2.6.23, cleaned my buildroot and did "make" again. Jan 05 17:00:38 Compilation is fine, but i still don't have any openwrt-fvx538v1-zImage.... Jan 05 17:19:17 nix * r10120 /packages/libs/ptlib/Makefile: Enable expat support Jan 05 18:26:44 nbd: I haven't gotten to test nas in trunk yet, been to busy, hopefully tonight... Jan 05 18:57:13 netprince: don't bother, i will commit a new version today or tomorrow Jan 05 18:57:29 Kaloz: i don't understand how to have a kernel for the fvx... Jan 05 18:57:56 The patch is created and (apparently) working, but i don't have the kernel i'm waiting for... Jan 05 23:01:42 nix * r10121 /packages/libs/ptlib/Makefile: --enable-configfile is needed together with expat Jan 05 23:23:19 nbd: I will test your new version then, let you know how it works Jan 06 01:03:56 nbd * r10122 /trunk/package/busybox/patches/522-memleak.patch: remove memleak patch because of issues with premature freeing of memory - i will try to reduce the memory usage in a different way Jan 06 02:12:39 nbd * r10123 /trunk/package/qc-usb/Makefile: (log message trimmed) Jan 06 02:12:39 Remove LINUX_2_6 dependency from qc-usb Jan 06 02:12:39 This patch removes LINUX_2_6 dependency from qc-usb for those of us who Jan 06 02:12:39 still have broadcom chipsets as qc-usb works fine on LINUX_2_4 too. This Jan 06 02:12:39 compiles with both 2.4 and 2.6 kernels selected, and although i do not Jan 06 02:12:39 have a Kamikaze svn system, the same changes (albeit without the new Jan 06 02:12:43 package name changes in svn vs 7.09) work fine on my running 2.4 system Jan 06 02:12:45 nbd * r10124 /trunk/package/qc-usb/Makefile: fix potential build errors when changing the qc-usb package selection Jan 06 02:48:26 nbd * r10125 /trunk/package/busybox/patches/524-memory_usage.patch: save memory in ipkg while parsing package lists - there's no need to load the whole files into ram before parsing them Jan 06 02:48:32 ^^ please test this **** ENDING LOGGING AT Sun Jan 06 02:59:57 2008