**** BEGIN LOGGING AT Fri Feb 29 10:59:56 2008 Feb 29 11:02:50 can somebody help me configuring samba on kamikaze pls Feb 29 14:33:57 I bought a new USB TTL, but I still only read fro mserial Feb 29 14:34:05 maybe something is wrong with my term Feb 29 14:38:30 matteo: Make sure that flow control is disabled. I found that my USB TTL serial convertor didn't hold the flow control lines properly. Feb 29 14:38:44 (FTDI chip). Feb 29 14:38:51 minicom asks for hardware and software Feb 29 14:38:54 i'll disable both? Feb 29 14:39:09 yes Feb 29 14:39:10 Yes. Feb 29 14:39:16 usb 2-8: FTDI USB Serial Device converter now attached to ttyUSB0 Feb 29 14:39:16 usbcore: registered new interface driver ftdi_sio Feb 29 14:39:19 that's my syslog Feb 29 14:40:23 You probably have the same hardware as me; hardware flow control doesn't work on it unless you've cabled it specially (which I didn't). Feb 29 14:44:24 it still doesn't works Feb 29 14:45:29 F - Hardware Flow Control : No Feb 29 14:45:30 G - Software Flow Control : No Feb 29 15:26:13 matteo: use screen Feb 29 15:26:25 uh? Feb 29 15:26:32 screen /dev/ttyUSB0 38400 Feb 29 15:26:37 I've had the same trouble with minicom Feb 29 15:26:38 Ctrl-A \ to quite Feb 29 15:26:44 s/quite/quit/ Feb 29 15:27:05 let's try Feb 29 15:27:07 didn't found a way for logging though Feb 29 15:27:21 but for that purpose minicom is ok Feb 29 15:27:54 Ctrl-A H Feb 29 15:28:10 hi ejka Feb 29 15:28:10 or ctrl-a k :) Feb 29 15:28:16 welcome to #openwrt-devel! Feb 29 15:28:36 loswillios: for logging Feb 29 15:28:40 :) Feb 29 15:28:55 no, can's write too Feb 29 15:29:17 ah yes. but that captures just the screen Feb 29 15:29:26 ? Feb 29 15:29:47 not the whole output scrolling by Feb 29 15:30:17 it will log all the session since the moment it was pressed Feb 29 15:30:32 ah nice Feb 29 15:30:41 didn't know that Feb 29 15:33:51 oh right, I confused it with lower h Feb 29 17:41:01 hey, anyone have poblems with ipkg? Feb 29 17:41:26 i have new packages versions in repository, but it detect the same version Feb 29 17:41:43 ipkg update Feb 29 17:41:45 Shows new and say that is a possible upgrade but dont install Feb 29 17:42:02 the ipkg install packagename should work Feb 29 17:42:16 No it say up to date Feb 29 17:42:31 what version numbers are you using? Feb 29 17:42:37 there are a few bugs in ipkg Feb 29 17:43:11 like this ticket Feb 29 17:43:12 https://dev.openwrt.org/ticket/1908 Feb 29 17:44:00 but this was open 9 months ago Feb 29 17:44:56 and i have another problem Feb 29 17:45:09 with atheros working in STA mode in a WPA-PSK network Feb 29 17:45:20 i built wpa supplicant with madiwifi support Feb 29 17:46:04 it doesn't look like the fix there as been commited :-/ Feb 29 17:47:12 sta with psk works here using the config file Feb 29 17:47:23 changing the makefile correctely, but the interface are all time disassociating and associating .. Feb 29 17:47:38 using the config file?? Feb 29 17:47:50 /etc/config/wireless Feb 29 17:48:17 with atheros board? Feb 29 17:48:18 I do see the sta disassociating and associating at times, but it normally will connect Feb 29 17:48:29 are you using kamikaze? Feb 29 17:48:40 But in my machine is a lot of times by second Feb 29 17:48:49 i cant transmit tcp packets Feb 29 17:51:15 im using svn version Feb 29 17:51:34 but with 7.98 i had the same problem Feb 29 17:51:39 but with 7.09 i had the same problem Feb 29 17:52:36 GazeteiRo: the disassociating and associating problem is a bug in either madwifi or wpa_supplicant I do not know which Feb 29 19:47:40 florian * r10538 /packages/sound/pulseaudio/Makefile: Upgrade to pulseaudio-0.9.9, goes further in the compilation process Mar 01 08:36:09 ejka: did you get a chance to look at the ethernet problems with ar7 and 2.6.24 ? (nabcore reported a bug...) **** ENDING LOGGING AT Sat Mar 01 10:59:57 2008