**** BEGIN LOGGING AT Wed Aug 13 02:59:57 2008
Aug 13 05:45:14 <sn9> [florian]: ping
Aug 13 05:59:04 <sn9> [florian]: on ar525w, there is a slight goof in line 1329 of r6040.c: "card_idx" should be "card_idx ^ 1"
Aug 13 10:22:57 <CIA-8> florian * r12291 /packages/net/iodine/Makefile: Update iodine to 0.4.2 (#3877)
Aug 13 10:24:21 <sn9> [florian]: ^^^
Aug 13 13:01:03 <[florian]> sn9: I will fix the card_idx line of r6040
Aug 13 13:30:38 <CIA-8> florian * r12292 /trunk/package/wpa_supplicant/files/wpa_supplicant.sh: Fix a bug when parsing ca_cert and eap_type with wpa_supplicant, this should only be set for 802.1x setups
Aug 13 14:06:33 <CIA-8> florian * r12293 /trunk/package/mac80211/files/lib/wifi/mac80211.sh: Fix putting mac80211 interfaces in monitor and managed modes
Aug 13 14:51:58 <sn9> [florian]: all the file needs is :1329s/card_idx/card_idx ^ 1/
Aug 13 14:52:05 <sn9> in vim
Aug 13 14:52:58 <[florian]> sn9: I did not forget, btw, did you manage booting kernels >= .25 on your airlink ?
Aug 13 14:55:27 <sn9> this isn't on mine; it's borrowed, and i booted the autobuild jffs2 snapshot
Aug 13 14:56:19 <sn9> i took a look at mine again after that, and i need some higher-precision rework tools before i apply power to it again
Aug 13 14:57:29 <sn9> does it currently have .23 or .24?
Aug 13 14:57:35 <[florian]> it has .24 for now
Aug 13 14:57:37 <[florian]> and works fine
Aug 13 14:57:39 <sn9> :(
Aug 13 14:57:49 <sn9> no ap mode in .24, right?
Aug 13 14:57:56 <[florian]> well it could using a patch
Aug 13 14:58:05 <sn9> to .24? where?
Aug 13 14:58:10 <[florian]> to mac80211
Aug 13 14:58:41 <sn9> the ap-capable post-.23 mac80211 is not backportable to .24
Aug 13 14:59:35 <sn9> as the matter of fact, even .26 is no longer supported
Aug 13 14:59:43 <[florian]> we use compat-wireless and afaik the patch was against compat-wiressl
Aug 13 14:59:48 <sn9> it's .27rc1 or later now
Aug 13 15:00:10 <sn9> compat-wireless has been discontinued
Aug 13 15:02:01 <sn9> and compat-wireless still refuses to build natively on knoppix 5.3.1, btw
Aug 13 15:05:36 <sn9> [florian]: what issue is there with >= .25?
Aug 13 15:05:58 <sn9> is it the lzma thing?
Aug 13 15:05:59 <[florian]> it does not boot at all
Aug 13 15:06:07 <[florian]> seems like it is decompressed correctly
Aug 13 15:06:15 <[florian]> I added some printf in the lzma decompression code btw
Aug 13 15:06:45 <sn9> so, where does it hang?
Aug 13 15:07:34 <[florian]> did not debug much more for now
Aug 13 15:08:11 <[florian]> sn9: here is what a bootlog looks like now : http://openwrt.pastebin.ca/1169813
Aug 13 15:09:15 <CIA-8> florian * r12294 /trunk/target/linux/rdc/files/drivers/net/r6040.c: Fix card_idx calculation, thanks sn9
Aug 13 15:10:58 <sn9> [florian]: that log is .24; i've seen that
Aug 13 15:13:17 <Matti1> there seem to be patches in the forum to get wifi working with boadcom and 2.6. Will this patches be checked into the trunk ?
Aug 13 15:14:04 <[florian]> Matti1: yes, once I tested them
Aug 13 15:14:16 <Matti1> cool
Aug 13 15:14:25 <sn9> Matti1: probably still waiting for an update to the netlink layer
Aug 13 15:16:05 <sn9> [florian]: those patches involve mac80211, right?
Aug 13 15:16:22 <[florian]> sn9: yes
Aug 13 15:16:58 <sn9> so, they would provide ap mode on all mac80211 targets with compatible kernels?
Aug 13 15:17:04 <[florian]> yep
Aug 13 15:17:17 <sn9> anything i can do to help?
Aug 13 15:17:32 <sn9> i could use a WRT350Nv1
Aug 13 15:17:33 <[florian]> make rdc boot with .25 :)
Aug 13 15:18:45 <sn9> for that, i would need to get the ar525w up, since it's the best-supported rdc device
Aug 13 15:19:03 <[florian]> wrt350nv1 is marvell or broadcom based ?
Aug 13 15:19:09 <sn9> brcm
Aug 13 15:19:15 <sn9> v2 is marvell
Aug 13 15:24:25 <sn9> afk -- back in 30 min
Aug 13 15:39:50 <CIA-8> florian * r12295 /trunk/target/linux/generic-2.6/ (config-2.6.25 config-2.6.26): Add missing config symbols
Aug 13 15:52:50 <sn9> re
Aug 13 15:55:01 <[florian]> re
Aug 13 16:15:48 <CIA-8> juhosg * r12296 /trunk/target/linux/adm5120/ (2 files in 2 dirs): [adm5120] fix gpio number of the reset button Compex WP54 boards
Aug 13 17:50:35 <sn9> [florian]: the wrt350n is ready for flashing. is there an existing image i should try, or do i need to rebuild?
Aug 13 18:13:35 <[florian]> sn9: I think you'd better build one to have brcm-wl-mimo included
Aug 13 18:13:45 <[florian]> sn9: sorry for the delay, took the train to get back hom
Aug 13 18:14:05 <sn9> ok. 2.6?
Aug 13 18:39:16 <[florian]> sn9: humm, 2.6 yeah
Aug 13 18:39:27 <[florian]> sn9: not sure you will have wifi fully working though
Aug 13 18:41:16 <sn9> [florian]: the point is to test the wifi patches
Aug 13 18:41:59 <[florian]> sn9: 2.6 is defacto a good choice :)
Aug 13 18:43:42 <sn9> yes. what should i add for the test?
Aug 13 18:45:28 <[florian]> patches mentionned in ticket 3866
Aug 13 19:32:49 <CIA-8> florian * r12298 /trunk/package/hostapd/ (Makefile patches/): Update hostapd to 0.6.4
Aug 13 19:35:41 <CIA-8> florian * r12299 /trunk/package/mac80211/ (Makefile patches/004-allow-ap-vlan-modes.patch): Allow mac80211 drivers to work in master mode
Aug 13 19:38:03 <CIA-8> florian * r12300 /trunk/package/b43/ (36 files in 3 dirs): Update b43 to work in AP mode
Aug 13 19:39:34 <loswillios> that'll make a lot people happy
Aug 13 19:39:56 <sn9> [florian]: are those from ticket 3866?
Aug 13 19:40:26 <loswillios> yes
Aug 13 19:40:48 <[florian]> sn9: yes
Aug 13 19:41:07 <sn9> ok, one less thing for me to do
Aug 13 19:41:08 <[florian]> I still get some phy errors, but it will be easier to fix now it is working
Aug 13 19:42:08 <CIA-8> florian * r12301 /trunk/target/linux/brcm47xx/profiles/WRTSL54GS.mk: Now we have b43 working in master mode, include b43 in the profile (#3827)
Aug 13 19:45:26 <[florian]> crazy, you can still scan and be in ap mode at the same time :)
Aug 13 19:46:47 <loswillios> now that it's finally working, you are trying to break it :-)
Aug 13 19:47:34 <[florian]> of course :)
Aug 13 19:47:48 <[florian]> now let's try if rt61 works in master mode
Aug 13 19:52:29 <CIA-8> juhosg * r12302 /trunk/target/linux/adm5120/files-2.6.26/ (3 files in 3 dirs): [adm5120] load board's mac address on Compex devices
Aug 13 20:00:33 <[florian]> yeah, got it working with rt61pci :)
Aug 13 21:06:45 <sn9> [florian]: can you please fix the opkg makefile, since nobody else has bothered?
Aug 13 21:11:07 <[florian]> sn9: did not I commit the fix ?
Aug 13 21:11:16 <[florian]> sn9: coudl you remind of what you wanted me to change ?
Aug 13 21:11:48 <sn9> -               CC=$(TARGET_CC) \
Aug 13 21:11:48 <sn9> +               CC="$(TARGET_CC)" \
Aug 13 21:12:00 <[florian]> ah I thought I committed it
Aug 13 21:12:39 <CIA-8> florian * r12303 /trunk/package/opkg/Makefile: Fix opkg compilation with ccache, thanks sn9
Aug 13 21:38:25 <sn9> [florian]: is bcm57xx the same as tg3?
Aug 13 21:58:59 <sn9> [florian]: this is not good:
Aug 13 21:59:16 <sn9> Depends on: (TARGET_brcm_2_4 || TARGET_brcm47xx) && TARGET_brcm_2_4
Aug 13 21:59:33 <sn9> for kmod-brcm-57xx
Aug 13 22:00:27 <sn9> brcm-wl-mimo is 2.4-only, also
**** ENDING LOGGING AT Thu Aug 14 02:59:57 2008