**** BEGIN LOGGING AT Sun Mar 21 02:59:57 2010 Mar 21 03:20:29 swalker * r20327 /packages/libs/ (check/Makefile gconf2/Makefile libxapian/Makefile): [packages] check, gconf2, libxapian: fix section names Mar 21 03:47:22 build #46 of ppc40x is complete: Failure [failed compile_7] Build details are at http://tksite.gotdns.org:8010/builders/ppc40x/builds/46 Mar 21 04:56:27 larsc: xorg-util/xorg-utils, xorg-font/xorg-fonts section names exist as well Mar 21 05:06:28 loswillios: have you looked at http://wiki.openwrt.org/doc/uci/fstab Mar 21 05:23:30 dogge10: it's on my 'Someday' list Mar 21 06:39:19 abyrne * r20328 /packages/ipv6/wide-dhcpv6/files/dhcp6c.config: [packages] wide-dhcpv6: delete empty, unused file Mar 21 06:53:09 acoul * r20329 /trunk/target/linux/generic-2.6/patches-2.6.34/510-yaffs_support.patch: generic-2.6: sync patches to 2.6.34-rc2 Mar 21 07:54:45 swalker * r20330 /packages/ (3 files in 3 dirs): [packages] libsigc++, python2-chardet, sierra-pcmcia: fix urls Mar 21 08:13:04 acoul * r20331 /trunk/package/hostap-driver/Makefile: hostap-driver: make hostap-pci visible (similarly to r20047) Mar 21 08:41:50 cshore: yes, I know that page. Maybe my image is too old Mar 21 08:44:46 loswillios - shouldn't be. If it's got the packages it should work Mar 21 08:46:17 loswillios: so you have block-mount and block-hotplug installed, and are not using block-extroot, but your /dev/sda1 doesn't get automounted? Mar 21 08:47:02 loswillios: are you trying to mount it in a particular place, or do you just want it to automatically mount? Mar 21 08:47:26 if the latter remove the config 'mount' section for /dev/sda1 Mar 21 08:47:50 if the former, set the target for /dev/sda1 and option enable 1 Mar 21 08:48:50 perhaps the default should be for the automount to happen rather than to have a disabled entry Mar 21 08:53:54 actually, rather than removing the /dev/sda1 config section, just set option from_fstab to 0 Mar 21 08:54:12 if you don't care where it's mounted Mar 21 08:59:43 ah, I've wondered whether that entry would be the cause. Let me try Mar 21 09:02:43 cshore: yup, that's it. thanks Mar 21 09:02:54 I guess sda2 doesn't get mounted because of ntfs-3g Mar 21 09:03:34 it's either that or the swap entry Mar 21 09:03:50 you might want to turn off from_fstab for autoswap too Mar 21 09:08:59 ok, that got me a little further: http://pastebin.ca/1848001 Mar 21 09:14:03 what device? Mar 21 09:15:05 are you using a non-standard mount? Mar 21 09:16:16 what filesystem on /dev/sda1? Mar 21 09:18:23 it's a usb-disk with two partitions. sda1 is btrfs (correctly mounted), sda2 is ntfs (mounting fails, I guess because I only have ntfs-3g installed, not kmod-fs-ntfs) Mar 21 09:19:17 'ntfs-3g /dev/sda2 /mnt/sda2' works Mar 21 09:19:19 yeah, that would be why....busybox mount doens't know what to do with it Mar 21 09:21:28 I guess so Mar 21 11:04:01 acoul * r20332 /trunk/target/linux/atheros/config-2.6.33: atheros: config-2.6.33, fix CONFIG_CMDLINE Mar 21 11:07:36 acoul * r20333 /trunk/target/linux/atheros/config-2.6.33: atheros: config-2.6.33, turn off BSD Process Accounting Mar 21 11:10:01 acoul * r20334 /trunk/target/linux/atheros/config-2.6.33: atheros: config-2.6.33, turn off swap memory Mar 21 11:13:29 acoul * r20335 /trunk/target/linux/atheros/config-2.6.33: atheros: config-2.6.33, optimize for size Mar 21 11:19:26 acoul * r20336 /trunk/target/linux/atheros/config-2.6.33: Mar 21 11:19:26 atheros: config-2.6.33, use UP-only small-memory-footprint RCU Mar 21 11:19:26 (tested on production system, works solid for couple of weeks) Mar 21 11:22:44 acoul * r20337 /trunk/target/linux/atheros/config-2.6.33: atheros: config-2.6.33, PCI: disable common quirks Mar 21 13:35:35 blogic * r20338 /trunk/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/ifxmips.h: [ifxmips] add register definitions for ebu Mar 21 13:57:09 hauke * r20339 /trunk/target/linux/generic-2.6/ (5 files): Mar 21 13:57:09 kernel: Add some missing config symbols Mar 21 13:57:09 This adds some missing config symbols and opens the menu Mar 21 13:57:09 behind CONFIG_SND_PCI and CONFIG_ISDN. Mar 21 14:02:33 hauke * r20340 /trunk/target/linux/x86/ (config-2.6.30 config-default olpc/config-2.6.31): Mar 21 14:02:33 x86: do no overwrite CONFIG_SCSI_LOWLEVEL Mar 21 14:02:33 CONFIG_SCSI_LOWLEVEL is needed for some packages. Mar 21 14:02:33 Backport commit r19759 into kernel 2.6.30 Mar 21 14:06:01 hauke * r20341 /trunk/package/kernel/modules/netsupport.mk: Mar 21 14:06:01 kernel: make ISDN build again Mar 21 14:06:01 In combination with r20339 ISDN will be build again. Mar 21 14:06:01 * Fix syntax problem in kmod-capi Mar 21 14:06:01 * add xfrm_ipcomp to kmod-ipsec Mar 21 14:06:33 hauke * r20342 /trunk/package/kernel/modules/hwmon.mk: kernel: fix typo Mar 21 14:07:31 hauke * r20343 /trunk/package/kernel/modules/crypto.mk: kernel: include aes-i586 and twofish-i586 into crypto packages for x86 Mar 21 14:09:26 hauke * r20344 /trunk/package/kernel/modules/netdevices.mk: Mar 21 14:09:26 kernel: fix tg3 installation Mar 21 14:09:26 libphy is build into the kernel for brcm47xx and not as an extra module. Mar 21 14:12:33 hauke * r20345 /trunk/package/kernel/modules/sound.mk: kernel: load after its dependencies Mar 21 14:18:13 hauke * r20346 /trunk/package/kernel/modules/ (block.mk usb.mk): Mar 21 14:18:13 kernel: x86 remove dependency on ata-core and scsi-core Mar 21 14:18:13 The x86 image includes the modules out of ata-core and scsi-core Mar 21 14:18:13 directly in the kernel image. Do not depend on these packages, because Mar 21 14:18:13 they are not build in a x86 image. Mar 21 14:18:14 This fixes #6873 Mar 21 14:19:50 hauke * r20347 /trunk/package/kernel/modules/usb.mk: kernel: these modules are already loaded by the scsi-core package Mar 21 14:22:40 hauke * r20348 /trunk/package/kernel/modules/block.mk: Mar 21 14:22:40 kernel: fix some minor error: Mar 21 14:22:40 * module ide-pci-generic is also included if it was build Mar 21 14:22:40 * correct loading queue for kmod-dm Mar 21 14:22:40 * place for mvsas.ko changed in new kernel. Mar 21 15:08:56 build #34 of cobalt is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/cobalt/builds/34 Mar 21 15:46:51 lars * r20349 /trunk/target/linux/xburst/files-2.6.32/drivers/mmc/host/jz_mmc.c: [xburst] jz_mmc: Fix timeout timer. Annotate timeout checks as unlikely() Mar 21 16:05:29 florian * r20350 /trunk/target/linux/atheros/ (4 files in 4 dirs): [atheros] fix ethernet driver remove function to use the correct annotation (#6311) Mar 21 16:14:10 florian * r20351 /packages/ipv6/dibbler/Makefile: [package] link dibbler-server against libstdc++, does not work with uclibc++ (#6905) Mar 21 16:22:11 hm. for the dibbler libstdc++ issue it probably would have been sufficent to replace PKG_FIXUP:=libtool with PKG_FIXUP:=libtool-uclibcxx Mar 21 16:23:57 <[florian]> larsc: I do not think so, it segfaults at runtime with uclibcxx Mar 21 16:24:54 florian * r20352 /packages/net/ditg/ (. Makefile patches/ patches/001-no_stropts.h): [package] add ditg, patch from Giovanni Di Stasi Mar 21 16:27:21 hm, ok Mar 21 17:16:38 florian * r20353 /trunk/package/kernel/modules/wireless.mk: [package] add pcmcia hermes module, patch from Guillaume Lecerf Mar 21 17:16:42 florian * r20354 /trunk/package/busybox/files/cron: Mar 21 17:16:43 [package] If /var/spool/cron/crontabs is a directory, then /etc/init.d/cron Mar 21 17:16:43 will place a spurious "crontabs" symlink into it. Patch fro Stefan Monnier Mar 21 17:16:47 florian * r20355 /trunk/include/target.mk: [package] disable ucitrigger for now, not used, patch from Dave Kooper Mar 21 17:16:52 florian * r20356 /trunk/ (16 files in 9 dirs): change from /jffs to /overlay, patch from Daniel Dickinson Mar 21 17:56:21 florian * r20357 /trunk/package/kernel/modules/wireless.mk: [package] fix path to the orinoco pcmcia driver, thanks hauke Mar 21 18:16:10 juhosg * r20358 /trunk/target/linux/ar71xx/files/ (22 files in 2 dirs): ar71xx: change PHY select logic, and update phy_masks Mar 21 18:16:26 juhosg * r20359 /trunk/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb4xx.c: ar71xx: use the RB411 setup for the RB411U Mar 21 18:18:15 acoul * r20360 /trunk/target/linux/atheros/config-2.6.33: atheros: config-2.6.33, add missing option on commit r20332 Mar 21 19:10:37 swalker * r20361 /packages/ipv6/thc-ipv6/Makefile: [packages] thc-ipv6: use PKG_RELEASE instead of PKG_REVISION Mar 21 19:12:38 hauke * r20362 /trunk/package/kernel/modules/netfilter.mk: kernel: fix some documentation Mar 21 19:37:42 any reason not to tell #5706's reporter to file it upstream instead? Mar 21 19:40:12 swalker: yes, he should report this upstream Mar 21 19:56:23 cshore: is #6074 still valid? Mar 21 19:57:07 Not for me Mar 21 20:10:48 Hauke1: want to checkin the netsupport ipcomp doc change from #5849? Mar 21 21:59:58 hi Mar 21 22:00:10 i selected this option - CONFIG_KEXEC_TOOLS_TARGET_NAME="mipsel" Mar 21 22:00:28 but where can i now find the newly created kernel to test it with kexec? Mar 21 22:14:54 hi Mar 21 22:15:04 why does my build fail with this: http://fpaste.org/O2cK/ ? Mar 21 22:16:41 Plouj-: do you build with -j ? Mar 21 22:17:21 rtz2: no, just make V=99 Mar 21 22:17:36 I did make clean before that, and I also removed everything from build_dir Mar 21 22:19:24 build #30 of ixp4xx is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ixp4xx/builds/30 Mar 21 22:36:00 jow * r20363 /trunk/package/hostapd/files/hostapd.sh: [package] hostapd: always strip "11" from hwmode value Mar 21 22:43:37 jow * r20364 /trunk/package/wpa_supplicant/: [package] remove leftover wpa_supplicant directory after r19286 Mar 21 23:13:47 in kamikaze, is the make menuconfig option still available? Mar 21 23:14:04 if yes, where is it? i cant seem to find it Mar 21 23:17:14 icewaterman: run make menuconfig? or what exactly are you looking for? Mar 21 23:18:26 yes, i want to configure the packages with dependency tracking Mar 21 23:18:51 so that i cannot forget dependencies in make image PACKAGES="bl" Mar 21 23:18:53 bla Mar 21 23:22:48 build #33 of gemini is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/gemini/builds/33 Mar 21 23:37:54 seems make image has its own dependency tracking Mar 21 23:43:46 ah you talk about the imagebuilder? Mar 21 23:47:44 xMff: yes Mar 21 23:48:27 anyway, how can i remove ppp and dependencies from the image while building it? it seems to stay (maybe as a dependency itself) Mar 21 23:48:29 yes, this does dependency tracking using ipk metadata Mar 21 23:48:54 specify it in the PACKAGES="..." list prefixed with "-" Mar 21 23:49:03 e.g. make image PACKAGES="foo bar -ppp" Mar 21 23:49:53 ah, i can explicitly exclude them Mar 21 23:49:56 thx Mar 21 23:50:17 you can take a look at the wl300ge profile Mar 21 23:50:56 700ge I mean Mar 21 23:51:03 https://dev.openwrt.org/browser/trunk/target/linux/brcm-2.4/profiles/WL700GE.mk Mar 21 23:51:05 line 10 Mar 21 23:55:22 wow, that saves quite a lot of space Mar 21 23:55:28 :) Mar 21 23:55:48 whily you're at it you can even embed your current config Mar 21 23:55:54 *while Mar 21 23:56:03 xMff: i would say: why the hell didnt you tell me sooner", though i gotta admit, that you did... Mar 21 23:57:02 xMff: what do you mean by embedding the config? Mar 21 23:57:15 http://wiki.openwrt.org/doc/howto/imagebuilder#files Mar 21 23:58:17 if you do that with /etc/config/* and /etc/passwd you can create an image that requires zero config after flashing Mar 21 23:58:42 and if you reset jffs2 it will come up with that settings too Mar 22 00:00:15 xMff: yes, but i guess the amount of work is roughly the same and dangerous, since i want to set it up, fire and forget. should any update be necessary, the prepared configuration is probably no longer valid and if in a couple of years i decide to reconfigure, my documentation is gone Mar 22 00:00:29 ;) Mar 22 00:00:44 should be decided individually obviously Mar 22 00:00:57 I did it a couple of time to remotely update my home gateway Mar 22 00:02:26 however it is useful for /etc/passwd and /etc/dropbear/authorized_keys, because those tend to never change Mar 22 00:03:13 xMff: i thought that as well, until this horrible debian openssl-catastrophy Mar 22 00:04:04 none of my keys was affected :) Mar 22 00:04:23 xMff: as i was a debian user at that time, all my keys were affected Mar 22 00:05:03 in a way i still am a debian user, since ubuntu is very similar Mar 22 00:05:31 yea, don't want to know what all those wannabe distros would do without debian Mar 22 00:07:28 xMff: but debian itself is only for hardcore linux users, the fanatics. its becoming worse with every release - mostly the discussions are sick. Mar 22 00:08:00 lars * r20365 /packages/libs/boost/ (4 files in 2 dirs): Mar 22 00:08:01 [packages] Boost: Add packages for all boost libs. Mar 22 00:08:01 Patch by AlexanderS Mar 22 00:08:02 xMff: they dont even support firefox for the full life-cycle Mar 22 00:08:13 but then again, this is off-topic Mar 22 00:08:34 I always drop the official firefox into /usr/local anyway Mar 22 00:08:53 old habit Mar 22 00:09:04 xMff: i did that on slackware as well Mar 22 00:09:10 but no more Mar 22 00:09:23 (both slackware and /usr/local/) Mar 22 00:14:12 yea, easy to miss security updates and stuff Mar 22 00:15:54 xMff: it is also not very comfortable. if you want to manually update very software, use windows... Mar 22 00:19:57 but the result is really good, all packages i wanted in the image and still 172k left for configuration files Mar 22 00:22:25 gn8, need to sleep, since tomorrow will be a really hard day. the computer science department offers free beer (not as in software) in the evening... Mar 22 00:38:44 is madwifi the only one that requires hwmode to have an 11 prefix? Mar 22 00:39:12 swalker: no Mar 22 00:39:35 hwmode 11ng is for mac80211 is valid too Mar 22 00:39:58 it will result in hw_mode=g and ieee80211n=y then Mar 22 00:43:48 why bother with the 11 prefix if you're just going to have to remove it? Mar 22 00:45:42 I was not in the mood to untangle it all, also x-wrt and luci write values using the 11 prefix Mar 22 00:46:07 and then there are old madwifi configs around, it is documented this way etc. etc. Mar 22 00:46:49 the hwmode_fixup used to map 11n[ag] to actual values expects the 11 prefix as well Mar 22 00:47:08 right Mar 22 00:47:32 so I just relaxed it a bit ;) Mar 22 00:47:40 accept more fuzz Mar 22 00:58:52 so, is the latest trunk the same as the Backfire beta? Mar 22 01:04:52 yet, yes Mar 22 01:05:20 yet? Mar 22 01:06:45 backfire will be branched off from trunk when it gets released, subsequent maintenance releases will diverge from trunk than, as it happened with 8.09 Mar 22 01:07:02 right now the beta is based on trunk Mar 22 01:07:14 s/than/then/ Mar 22 01:10:13 so, when is the 10.02 going to happen? :P Mar 22 01:10:27 10.02 release* Mar 22 01:10:46 build #32 of ifxmips is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/ifxmips/builds/32 Mar 22 01:10:54 the rc1 is planned for the end of march Mar 22 01:12:09 ok, I'll keep waiting... **** ENDING LOGGING AT Mon Mar 22 03:00:02 2010