**** BEGIN LOGGING AT Tue Jun 15 02:59:57 2010 Jun 15 06:49:57 hello Jun 15 07:29:31 build #68 of brcm_2_4 is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/brcm_2_4/builds/68 Jun 15 08:31:09 cshore: have you tried freeswitch on your hardware? Jun 15 08:31:25 _trine says he uses too much ram Jun 15 08:31:34 yes, Marc's been using it Jun 15 08:32:08 Lalloso: I have to test on the lesser version of our hardware to make sure we don't have that problem Jun 15 08:32:45 <_trine> cshore, my ram rises up to 98% use quite quickly Jun 15 08:33:02 <_trine> and then other precesses get killed Jun 15 08:33:46 <_trine> with asterisk the ram stays at about 77% Jun 15 08:33:54 <_trine> and its runs well Jun 15 08:34:46 gh Jun 15 08:35:00 I'm a freeswitch fun boy ! =) Jun 15 08:35:34 if i remember well trine has about 128 MB of RAMS Jun 15 08:35:52 i've run freeswitch on a router station pro with that same amount of rams without particular issues Jun 15 08:35:53 <_trine> Lalloso, no 64 meg Jun 15 08:36:04 i've been able of doing a conference with 10 people Jun 15 08:36:14 well i think freeswitch needs about 30 MBs of RAM Jun 15 08:36:28 this number comes from my experience Jun 15 08:36:32 _trine: what kind of call pattern and what hardware? Jun 15 08:36:51 freeswitch is much more powerfull than asterisk, but this power comes to a price :-\ Jun 15 08:37:28 <_trine> the hardware is a wndr3700 and I only use FS to make the odd phone call using voipstunt and my spa3000 Jun 15 08:37:42 what arch? Jun 15 08:37:53 <_trine> shall we move off the devel channel Jun 15 08:37:59 sure Jun 15 08:38:02 where too? Jun 15 08:38:25 <_trine> #bol Jun 15 08:38:29 <_trine> will do Jun 15 09:17:22 build #59 of ifxmips is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ifxmips/builds/59 Jun 15 11:05:19 build #56 of adm5120 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/adm5120/builds/56 Jun 15 11:40:07 nbd * r21809 /trunk/package/broadcom-wl/ (4 files in 4 dirs): Jun 15 11:40:07 Add a new kernel-version independent broadcom binary driver for brcm47xx (contributed by NewMedia-NET) Jun 15 11:40:07 This will allow us to get rid of brcm-2.4 soon. Jun 15 11:40:07 [ ... and there was much rejoicing ] Jun 15 12:51:09 build #56 of iop32x is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/iop32x/builds/56 Jun 15 13:32:32 build #59 of etrax is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/etrax/builds/59 Jun 15 14:12:49 is there any convention in preinit or firstboot to handle block devices for the overlay? Jun 15 14:20:48 define "handle" Jun 15 14:32:06 can a block device be used as the overlay when root is squashfs and no mtd device is available? Jun 15 14:32:52 I'm not sure I understand your question, but you might want to look at block-extroot Jun 15 14:33:05 What do you want to achieve ? Jun 15 14:38:50 some dom/doc have a built in block translation layer and must be accessed as block devices. Is there a way to use squashfs images on these types of flash chips? Jun 15 14:39:31 The idea is to keep squashfs root to be able to "hard reset" like normal mtd devices Jun 15 14:40:08 What device specifically ? Jun 15 14:44:33 msystems disk on module : http://www.esis.com.au/Adv1CPU/Adv1CPU2SSD.htm Jun 15 14:45:16 Isee Jun 15 14:45:35 Well that seems like a job for extroot : Jun 15 14:45:49 1) device boots, loads vital stuff from squashfs Jun 15 14:46:16 2) modules for the DOM is loaded (provided there is one) and /dev is populated Jun 15 14:46:40 3) extroot checks fstab and tries to mount your /dev/dom/whatever as / if available. If not, squashfs is used as / Jun 15 14:46:41 build #55 of ixp4xx is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ixp4xx/builds/55 Jun 15 14:46:45 (overlays obviously) Jun 15 14:47:30 I think. Jun 15 14:48:12 wouldnt we want to mount ssd as overlay, not root? Jun 15 14:48:34 That's what I meant, sorry Jun 15 14:48:53 block-extroot can also mount as overlay? Jun 15 14:49:18 I'm fairly sure that's what it does Jun 15 14:52:27 block-extroot says: "adds the option to have the root filesystem on storage other than the jffs or the boot root device" Jun 15 14:52:40 sounds more like a pivot_root Jun 15 14:52:51 Hm, yeah Jun 15 14:53:01 So what is it you want to do again ? Jun 15 14:53:03 I'm all confused Jun 15 14:54:43 use ssd with squashfs root partition and overlay 3rd ssd partition as block2mtd jffs2 overlay Jun 15 14:55:20 basically the came as current mtd setup only block device Jun 15 14:59:03 You want to use two SSD partitions on top of one another ? Jun 15 15:02:03 yes, same as current mtd setup. P1=boot P2=squashfs root P3=jffs2 or ext2 overlay Jun 15 15:09:13 there are allot of boards out there that use some sort of CF/SD/SSD for storage these days. Seems to be a growing trend. Jun 15 15:09:41 Gumstix for one.. Jun 15 15:56:29 build #64 of octeon is complete: Failure [failed compile_7] Build details are at http://tksite.gotdns.org:8010/builders/octeon/builds/64 Jun 15 15:58:08 HOORAH! found the answer to ssd overlay :D "is_rootfs = no " : http://wiki.openwrt.org/doc/uci/fstab Jun 15 16:11:32 build #63 of ep93xx is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/ep93xx/builds/63 Jun 15 16:17:18 ping xMff: I think I may have found a small bug, possibly in the way ifdown clears state variables? its still a bit confusing to me... Jun 15 16:20:23 The variables are cleared from /var/state/network, but udhcpc's default.script still finds the variables Jun 15 16:20:55 I think its because I'm running ifdown and ifup from a cgi script Jun 15 16:23:15 http://openwrt.pastebin.com/05A1ydf7 Jun 15 16:23:16 they must be set in the web server's environment? Jun 15 16:23:22 why isn't this working ^ Jun 15 16:23:23 ? Jun 15 16:31:20 netprince: don't think its webserver related Jun 15 16:34:59 jow_laptop, ? Jun 15 16:44:27 jow_laptop: I think your right, thanks Jun 15 16:44:28 jow_laptop, ? Jun 15 16:51:02 build #55 of orion is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/orion/builds/55 Jun 15 16:51:40 anyone? Jun 15 16:53:05 LOL Jun 15 16:54:35 man export doesn't show a "-n" switch Jun 15 16:55:02 hello. I have 2 Linksys WAG200N (ar7) units that I no longer need, and wondered if any dev would like them to work/play with? Jun 15 16:55:30 one of them will need a jtag cable to debrick, but the other is fine Jun 15 17:01:51 stintel, ? Jun 15 17:05:13 nbd, ? Jun 15 17:20:00 jow_laptop: it seems when I 'config_load network' the CONFIG_* variables are exported? so I should run config_clear before running 'ifup wan'? Or is there a more 'correct' method? Jun 15 17:25:06 it seems to work now at least Jun 15 17:49:28 build #54 of rb532 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/rb532/builds/54 Jun 15 18:05:34 nbd, ? Jun 15 18:21:07 build #53 of rdc is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/rdc/builds/53 Jun 15 18:51:24 juhosg * r21810 /packages/utils/cksfv/ (. Makefile): packages/utils: add cksfv package Jun 15 19:32:16 when I try to compile backfire from svn, I can't compile the perl package, I get "version.c:30:16: db.h: No such file or directory". Jun 15 19:33:12 on any other platform I would install libdb-dev, but I'm not sure what to do here, can someone point me in the right direction? Jun 15 19:38:03 build #53 of au1000 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/au1000/builds/53 Jun 15 19:47:59 I think I'm getting closer, I got package/libs/db47... Jun 15 20:00:46 build #51 of ramips is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ramips/builds/51 Jun 15 22:03:12 build #51 of ps3 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ps3/builds/51 Jun 15 22:11:24 Hi all! (I think) I just fixed a bug in Kamikaze. It's the first time however, so can somebody give me some advice on how to proceed? Jun 15 22:11:45 create a ticket at dev.openwrt.org Jun 15 22:11:54 and while you're here provide a brief summary Jun 15 22:11:58 maybe its already known Jun 15 22:12:14 ok Jun 15 22:13:58 I tried to setup an wpa enterprise connection over wlan using /etc/config/wireless and noticed that the generated config files for wpa_supplicant in /var/run/wpa_supplicant-.conf were not following my configuration. Jun 15 22:15:38 I found that in /lib/wifi/wpa_supplicant.sh, the configuration option "eap_type" isn't read. Jun 15 22:16:04 I see Jun 15 22:16:22 I just added the necessary function call to read the option. Jun 15 22:16:29 Seems to work Jun 15 22:17:47 then please create a proper patch Jun 15 22:17:57 xou can do that on the router Jun 15 22:18:15 diff -u /rom/lib/wifi/hostapd.sh /lib/wifi/hostapd/sh Jun 15 22:18:30 ... and attach it to the ticket Jun 15 22:19:09 All right, I'll do that. Thanks! Jun 15 22:19:30 no problem Jun 15 22:20:53 cshore * r21811 /packages/net/freeswitch/files/freeswitch.init: net/freeswitch: Set stacksize for freeswitch using ulimit in init script Jun 15 22:21:23 build #58 of goldfish is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/goldfish/builds/58 Jun 15 23:45:10 <[Fate]> do we support vlan tagging on ar7240? Jun 15 23:45:26 <[Fate]> or only in linux software? Jun 15 23:54:55 build #51 of ar7 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ar7/builds/51 Jun 16 00:11:08 build #49 of ubicom32 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ubicom32/builds/49 Jun 16 01:15:13 build #78 of ppc40x is complete: Exception [exception failed slave lost shell_10 compile_12] Build details are at http://tksite.gotdns.org:8010/builders/ppc40x/builds/78 Jun 16 01:15:15 build #61 of octeon is complete: Exception [exception failed slave lost shell_10 compile_12] Build details are at http://tksite.gotdns.org:8010/builders/octeon/builds/61 Jun 16 01:15:17 build #60 of ep93xx is complete: Exception [exception failed slave lost shell_10 compile_12] Build details are at http://tksite.gotdns.org:8010/builders/ep93xx/builds/60 Jun 16 01:15:20 build #58 of cobalt is complete: Exception [exception failed slave lost shell_10 compile_12] Build details are at http://tksite.gotdns.org:8010/builders/cobalt/builds/58 Jun 16 02:08:05 build #50 of xburst is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/xburst/builds/50 Jun 16 02:15:31 build #48 of x86 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/x86/builds/48 Jun 16 02:23:49 build #78 of atheros is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/atheros/builds/78 Jun 16 02:30:29 build #79 of ppc44x is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ppc44x/builds/79 Jun 16 02:41:53 build #82 of ppc40x is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ppc40x/builds/82 **** ENDING LOGGING AT Wed Jun 16 02:59:56 2010