**** BEGIN LOGGING AT Thu Oct 28 02:59:57 2010 Oct 28 06:12:35 build #16 of ps3 is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/ps3/builds/16 Oct 28 06:44:54 build #17 of octeon is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/octeon/builds/17 Oct 28 07:09:37 Hey philipp64, how goes it? Oct 28 07:10:27 having better luck getting your patches looked after (and any non-kernel or low-risk patches you want me to look at)? Oct 28 07:11:26 I can do that right now if you're here Oct 28 07:30:22 kaloz * r23685 /trunk/toolchain/binutils/ (Config.in Makefile patches/2.18/ patches/2.20/): [toolchain]: remove support for binutils 2.18 and 2.20 Oct 28 07:32:30 kaloz * r23686 /trunk/toolchain/gcc/common.mk: [toolchain]: we don't support gcc 3.x for some time now Oct 28 08:41:19 hcg * r23687 /trunk/target/linux/generic/config-2.6.36: [kernel] Add missing symbols to 2.6.36 config Oct 28 08:50:43 cshore_: too early for him i think.. Oct 28 08:51:12 ah, well, I saw his last message and though he might still be on Oct 28 08:51:24 *thought even Oct 28 08:51:58 last message i see from him is about 11 hours old.. unless this was on a mailing list or a pm or something :) Oct 28 08:52:02 hcg * r23688 /trunk/target/linux/omap35xx/gumstix/config-2.6.36: [kernel] Add 2.6.36 config for gumstix board Oct 28 08:53:15 bah, wasn't paying enough attention to the time stamp Oct 28 08:53:23 "Unlike build systems based on shell scripts or makefiles, the Yocto Project automates the fetching of sources from a variety of upstream sources or from local project repositories." Oct 28 08:54:57 hcg * r23689 /trunk/package/kernel/modules/other.mk: [packages] kernel: Add kernel module for OMAP WDT Oct 28 08:57:27 hcg * r23690 /trunk/target/linux/omap35xx/gumstix/ (profiles/gumstix.mk target.mk): [omap35xx] Bumper gumstix kernel version to 2.6.36 Oct 28 08:59:06 hcg * r23691 /trunk/target/linux/omap35xx/files/boot-mmc.cmd: [omap35xx] Update u-boot command-line parameters Oct 28 10:34:08 kaloz * r23692 /trunk/toolchain/gcc/Config.version: [toolchain]: fixup gcc version selection for the omap35xx target Oct 28 10:42:47 kaloz * r23693 /trunk/toolchain/gcc/Config.version: [toolchain]: the latest patchlevel gcc releases should work for these targets Oct 28 10:50:56 build #17 of rb532 is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/rb532/builds/17 Oct 28 11:02:45 build #14 of xburst is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/xburst/builds/14 Oct 28 11:04:13 kaloz * r23694 /trunk/toolchain/gcc/Config.in: [toolchain]: sync gcc's Config.in with Config.version Oct 28 11:19:44 build #18 of s3c24xx is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/s3c24xx/builds/18 Oct 28 11:23:53 kaloz * r23695 /trunk/toolchain/gcc/Config.in: fix typo Oct 28 11:23:56 build #20 of at91 is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/at91/builds/20 Oct 28 11:34:01 0/win 20 Oct 28 11:34:04 oops Oct 28 11:37:43 mb * r23696 /packages/net/znc/Makefile: znc: Strip arguments to module macro. This fixes build of autovoice module. Oct 28 11:42:44 Is there a way to tell make to abort _all_ jobs immediately, if an error in one job occurs? Oct 28 11:57:16 kill -9 -1 ? :) Oct 28 11:57:44 that kills all of everything immediatley Oct 28 11:57:54 but i assume you are talking about buildbot Oct 28 12:03:12 no Oct 28 12:03:19 I'm talking about make Oct 28 12:03:53 build #17 of ubicom32 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ubicom32/builds/17 Oct 28 12:04:14 blogic: If I run it with say 6 jobs and an error occurs in one job, build will fail. However, make waits for all jobs to finish before bailing out. I want it to cancel all jobs immediately. Oct 28 12:04:51 The problem is that it takes a lot of time for all jobs to finish on error. Oct 28 12:06:16 Say one core is busy with a huge build job. That would result in a huge wait time waiting for that single core. Oct 28 12:06:43 The time could be used more efficiently by cancelling all jobs immediately, fixing the bug, and restarting the whole process all over again. Oct 28 12:07:13 The problem gets worse with more jobs. This doesn't scale Oct 28 12:28:00 Is it easy to build OpenWRT toolchain with locales enabled? (uClibc one) Oct 28 12:28:14 I see some patches for locale support in tree, but no ready-made configs Oct 28 12:47:34 mb * r23697 /packages/Xorg/lib/xine-lib/Makefile: xine-lib: We link to XShm and shape extensions. Add the dependency. Oct 28 13:20:53 mb * r23698 /feeds/phone/fso-gsm0710muxd/Makefile: fso-gsm0710muxd: Fix prereq check Oct 28 13:28:19 nbd: any more ideas why that sr71a gives different max tx-power values in iw list for some channels ? Oct 28 13:28:39 regulatory? Oct 28 13:29:01 it's normal for cards to have different calibrated txpower for different frequencies Oct 28 13:29:46 ic Oct 28 13:30:13 so the max value being < what it should be is related to the txpower offset ? Oct 28 13:31:50 maybe I'll contact mikrotik and ubiquiti and ask them for an explanation Oct 28 13:31:59 coz the values still look weird somehow :) Oct 28 13:32:14 http://stewie.be.tintel.eu/bleh.txt Oct 28 13:33:07 xMff: you mentioned something about dd-wrt using a list of all cards with offset values. happen to have a link to that ? Oct 28 13:33:32 stintel: give me a few minutes, I need to find it again Oct 28 13:33:50 xMff: thanks Oct 28 13:34:48 and if I understand it correctly, using the max value in iw list for those cards, will result in me breaking the law, as those are 250 or 300mW cards and legal is max 100mW Oct 28 13:37:22 interesting, http://forum.mikrotik.com/viewtopic.php?p=186093&sid=7f2692ddd6f6920158cb320fffbe2ca9#p186093 Oct 28 13:38:34 can find the file anymore but here's something else: http://svn.dd-wrt.com:8000/dd-wrt/browser/src/router/shared/wl.c?rev=9457#L249 Oct 28 13:38:40 can't Oct 28 13:40:18 aha Oct 28 13:40:29 poweroffset=10 Oct 28 13:40:34 yikes :) Oct 28 13:41:53 so my sr71a is actually sending at 26dBm 400mW :/ Oct 28 13:42:19 unfortunately I don't have the equipment to test that Oct 28 13:42:47 stintel: mind that max txpower is for a specific speed Oct 28 13:43:16 stintel: for example 400mW XR2 does 100mW @54Mbps, and 400mW at 6 Oct 28 13:43:37 so I should do iw wlan0 set txpower limit 1000 to stay legal Oct 28 13:44:08 at least on the sr71a .. Oct 28 13:45:25 stintel: http://ubnt.com/downloads/sr71a_datasheet.pdf Oct 28 13:46:06 stintel: 5GHz 11n at max speed -> 15dBm Oct 28 13:46:37 yeah, I've seen that file before, unfortunately it doesn say anthing about different txp at different frequencies :( Oct 28 13:47:57 there's hardly difference between two 2GHz or two 5GHz channels Oct 28 13:48:56 so you agree that http://stewie.be.tintel.eu/bleh.txt output might look weird ? at least for phy0 (the sr71a) Oct 28 13:50:02 well, no idea if the sr71 uses an offset or not. maybe it could do more but cfg80211 limits it to 19dbm Oct 28 13:50:58 and could the value reported by iw list change depending on the speed that the card is currently transmitting on, or should that always show the highest possible value Oct 28 13:51:22 no idea, I would guess the second Oct 28 13:51:30 ok Oct 28 13:52:18 stintel: wheres you see poweroffset=10 Oct 28 13:54:42 OutBackDingo: http://svn.dd-wrt.com:8000/dd-wrt/browser/src/router/shared/wl.c?rev=9457#L249 Oct 28 13:55:13 actually line 271 / 273 Oct 28 13:55:53 the function below is interesting too Oct 28 13:56:10 at least for someone too lazy to read datasheets :P Oct 28 14:07:19 bah this is all too confusing Oct 28 14:58:39 build break in backfire svn Oct 28 14:59:19 http://pastebin.com/YddTmUVg Oct 28 14:59:38 http://downloads.openwrt.org/sources/opkg-576.tar.gz seems to be missing Oct 28 14:59:45 but it is referenced Oct 28 16:03:11 mb * r23699 /feeds/phone/paroli/patches/100-compile-fixes.patch: paroli: Fix build with dash shell Oct 28 16:09:43 mb * r23700 /feeds/phone/paroli/Makefile: paroli: Build needs edje_cc. Add the prereq. Oct 28 16:11:03 stintel: hrmm makes me wonder if the Pico M2HP has also Oct 28 16:11:42 aroscha: theoretically it should just svn co the sources then Oct 28 19:24:21 mb * r23701 /feeds/lxde/apps/ (4 files in 3 dirs): lxshortcut, lxrandr, lxsession-edit: Force-create stamps Oct 28 19:49:48 xMff: (about the missing opkg.tar.gz - nope, the svn command fails then Oct 28 21:07:28 xMff: noch da? Oct 28 21:07:36 yes Oct 28 21:08:46 but make it fast, I'm late to a party Oct 28 21:08:55 xMff: ok :) just to let you know: http://pastebin.com/iF77CFF7 Oct 28 21:09:09 that was the problem I was discussing with you at 6 pm Oct 28 21:09:22 so it seems also svn failed , don't know why Oct 28 21:09:34 some googlecode.com server problem maybe... Oct 28 21:09:39 anyway... have fun :) Oct 28 21:09:43 either that or a proxy in between Oct 28 21:09:47 moment... Oct 28 21:09:54 there is no proxy in between for me Oct 28 21:10:49 http://luci.subsignal.org/~jow/opkg-576.tar.gz Oct 28 21:10:54 13ccc896a78871cbe90212fbcb10e620 Oct 28 21:11:09 put that in dl/ Oct 28 21:11:24 nbd: can you upload that sometime please? ^ Oct 28 21:11:38 bbl Oct 28 21:12:59 done Oct 28 21:13:23 ok :) Oct 28 21:13:28 thx! Oct 28 21:13:34 xMff: have fuuuun!!! Oct 28 22:18:44 i now have the next buildbreak Oct 28 22:18:54 Download failed. Oct 28 22:18:55 --2010-10-29 00:14:05-- http://downloads.sourceforge.net/bridge/bridge-utils-.tar.gz Oct 28 22:18:55 Resolving downloads.sourceforge.net... 216.34.181.59 Oct 28 22:18:56 Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected. Oct 28 22:18:56 HTTP request sent, awaiting response... 404 Not Found Oct 28 22:18:57 2010-10-29 00:14:05 ERROR 404: Not Found. Oct 28 22:18:57 Download failed. Oct 28 22:18:58 --2010-10-29 00:14:05-- http://mirror2.openwrt.org/sources/bridge-utils-.tar.gz Oct 28 22:18:58 Resolving mirror2.openwrt.org... 88.198.39.176 Oct 28 22:18:59 Connecting to mirror2.openwrt.org|88.198.39.176|:80... connected. Oct 28 22:18:59 HTTP request sent, awaiting response... 404 Not Found Oct 28 22:19:00 2010-10-29 00:14:05 ERROR 404: Not Found. Oct 28 22:19:00 Download failed. Oct 28 22:19:00 --2010-10-29 00:14:05-- http://downloads.openwrt.org/sources/bridge-utils-.tar.gz Oct 28 22:19:01 Resolving downloads.openwrt.org... 78.24.191.177 Oct 28 22:19:01 Connecting to downloads.openwrt.org|78.24.191.177|:80... connected. Oct 28 22:19:18 seems like there is a typo here Oct 28 22:20:04 no Oct 28 22:35:37 aroscha: that's odd, the version number seems to be missing/empty Oct 28 22:35:49 KanjiMonster: exactly Oct 28 22:35:52 that is what is missing Oct 28 22:36:16 even though it is set in the Makefile (in an if branch, seems like it is not taken) Oct 29 00:24:09 [florian]: ping Oct 29 00:57:57 build #17 of ixp4xx is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/ixp4xx/builds/17 Oct 29 01:23:27 build #17 of kirkwood is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/kirkwood/builds/17 **** ENDING LOGGING AT Fri Oct 29 02:59:57 2010