**** BEGIN LOGGING AT Sat Jan 08 02:59:57 2011
Jan 08 10:21:38 <CIA-77> juhosg * r24921 /branches/backfire/target/linux/ar71xx/files/ (4 files in 2 dirs):
Jan 08 10:21:39 <CIA-77> backfire: ar71xx: improve the wndr3700 quirks (backport of r23822, r23875)
Jan 08 10:21:39 <CIA-77> - move most of the code out of ath9k and instead allow the
Jan 08 10:21:39 <CIA-77> platform device to specify gpio overrides
Jan 08 10:21:39 <CIA-77> - fixes 5ghz signal strength issues
Jan 08 10:21:42 <CIA-77> juhosg * r24922 /branches/backfire/target/linux/ar71xx/ (2 files in 2 dirs): backfire: ar71xx: add wlan led for the TL-WR941ND (backport of r24612)
Jan 08 10:21:45 <CIA-77> juhosg * r24923 /branches/backfire/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh: backfire: ar71xx: populate LED configuration for WZR-HP-G300NH (backport of r24642)
Jan 08 10:21:51 <CIA-77> juhosg * r24924 /branches/backfire/target/linux/ar71xx/files/arch/mips/ar71xx/ (dev-ap94-pci.c dev-ap94-pci.h mach-wndr3700.c): backfire: ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards (backport of r24649, r24651)
Jan 08 10:22:06 <CIA-77> juhosg * r24925 /branches/backfire/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c: backfire: ar71xx: fix WLAN LEDs on the DIR-825 board (backport of r24650)
Jan 08 10:22:09 <CIA-77> juhosg * r24926 /branches/backfire/target/linux/ar71xx/patches-2.6.32/101-ksz8041_phy_driver.patch: backfire: ar71xx: fix micrel phy patch (backport of r24718)
Jan 08 10:55:21 <CIA-77> juhosg * r24927 /trunk/target/linux/ar71xx/generic/profiles/netgear.mk: ar71xx: add kmod-usb-ohci module for the WNDR3700 profile
Jan 08 10:57:51 <CIA-77> juhosg * r24928 /branches/backfire/target/linux/ar71xx/profiles/netgear.mk: backfire: ar71xx: add kmod-usb-ohci module for the WNDR3700 profile (backport of r24927)
Jan 08 11:32:34 <CIA-77> juhosg * r24929 /trunk/target/linux/ar71xx/files/arch/mips/ar71xx/ar71xx.c: ar71xx: use spinlock in ar71xx_device_{start,stop}
Jan 08 11:32:38 <CIA-77> juhosg * r24930 /trunk/target/linux/generic/files/drivers/net/phy/rtl8366rb.c: generic: rtl8366rb: use correct bitmasks in sanity checks
Jan 08 11:45:49 <nunojpg> can someone please mirror http://downloads.openwrt.org/sources/u-boot-2010.12.tar.bz2?
Jan 08 11:45:54 <nunojpg> it is only available over ftp
Jan 08 13:21:43 <CIA-77> hauke * r24931 /trunk/include/kernel-version.mk: kernel: add md5sum of kernel 2.6.37
Jan 08 14:52:01 <loswillios> [florian]: are the ADM6996M and ADM6996I switches much different?
Jan 08 14:53:21 <[florian]> loswillios: everytime I read the datasheet I do not see a major difference
Jan 08 14:53:24 <[florian]> loswillios: I am afk now
Jan 08 14:54:08 <loswillios> cool, maybe the vlan stuff works on the ADM6996I too
Jan 08 14:54:52 <loswillios> my infineon device can be actually useful then ;-)
Jan 08 15:10:49 <sn9> there has been headway on the adm6996*?
Jan 08 15:20:32 <sn9> loswillios: ?
Jan 08 15:34:10 <loswillios> sn9: see [OpenWrt-Devel] [PATCH] 802.1Q VLAN support for Infineon ADM6996 switch chip
Jan 08 15:37:09 <sn9> loswillios: is that for swconfig, or libphy?
Jan 08 15:45:11 <sn9> and is that committed?
Jan 08 15:48:14 <blogic> noz: both
Jan 08 15:48:19 <blogic> and its on the ml this morning
Jan 08 15:48:44 <sn9> i guess that's a no on the last question
Jan 08 15:49:15 <blogic> yes its a no
Jan 08 15:49:29 <blogic> i will try it tomorrow on a lantiq board i have
Jan 08 15:49:31 <sn9> feeds/packages/net/xtables-addons no longer compiles, even after a distclean, so i can't immediately try it
Jan 08 15:49:48 <sn9> but i might be able to tomorrow
Jan 08 15:53:37 <builder> build #63 of at91 is complete: Failure [failed compile_4]  Build details are at http://tksite.gotdns.org:8010/builders/at91/builds/63
Jan 08 16:20:45 <builder> build #60 of ppc40x is complete: Failure [failed shell_9]  Build details are at http://tksite.gotdns.org:8010/builders/ppc40x/builds/60
Jan 08 17:01:09 <builder> build #55 of ramips is complete: Failure [failed shell_9]  Build details are at http://tksite.gotdns.org:8010/builders/ramips/builds/55
Jan 08 17:09:37 <builder> build #55 of rb532 is complete: Failure [failed shell_9]  Build details are at http://tksite.gotdns.org:8010/builders/rb532/builds/55
Jan 08 17:12:22 <builder> build #60 of ubicom32 is complete: Failure [failed compile_4]  Build details are at http://tksite.gotdns.org:8010/builders/ubicom32/builds/60
Jan 08 17:30:15 <builder> build #63 of brcm47xx is complete: Failure [failed compile_4]  Build details are at http://tksite.gotdns.org:8010/builders/brcm47xx/builds/63
Jan 08 17:34:37 <CIA-77> juhosg * r24932 /trunk/package/swconfig/ (Makefile src/swlib.c): package/swconfig: add sanity checks to prevent a segfault
Jan 08 18:08:00 <CIA-77> juhosg * r24933 /trunk/target/linux/generic/files/drivers/net/phy/ (rtl8366_smi.c rtl8366_smi.h): generic: rtl8366: add debugfs file for VLAN4K table
Jan 08 18:08:05 <CIA-77> juhosg * r24934 /trunk/target/linux/generic/files/drivers/net/phy/rtl8366s.c: generic: rtl8366s: add vlan fid support
Jan 08 18:08:07 <CIA-77> juhosg * r24935 /trunk/target/linux/generic/files/drivers/net/phy/rtl8366s.c: generic: rtl8366s: use correct bitmasks in sanity checks
Jan 08 19:34:02 <philipp64|laptop> xMff: can you have a look at my two patches?  they're very minor.
Jan 08 19:34:56 <xMff> the gpio thing is okay, the ext4 patch is broken
Jan 08 19:35:06 <xMff> typo
Jan 08 19:35:23 <philipp64|laptop> what's wrong with it? hang on I'll look.
Jan 08 19:35:42 <xMff> also we recently disabled xattr for ext4 globablly, adding it to x86 again seems inconsistent to me
Jan 08 19:36:03 <philipp64|laptop> oh, the 'Y'.
Jan 08 19:36:18 <philipp64|laptop> that's fine. just delete that line then.
Jan 08 19:36:33 <xMff> yes. and afaik we have no userland to handle xattr at all, so I think its okay to kill it globally
Jan 08 19:40:49 <philipp64|laptop> also it seems to me that ef2progs breaks if you build it with -j6
Jan 08 19:50:45 <philipp64|laptop> hmm... http://fpaste.org/cY4v/
Jan 08 19:52:37 <philipp64|laptop> or http://fpaste.org/nQSR/ ... actually, it looks like $PATH isn't being set to include the directory for the cross-compiler.
Jan 08 20:28:23 <CIA-77> juhosg * r24936 /trunk/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c: generic: rtl8366_smi: init VLANs only in first switch initialization
Jan 08 20:28:27 <CIA-77> juhosg * r24937 /trunk/target/linux/generic/files/drivers/net/phy/ (rtl8366_smi.h rtl8366rb.c rtl8366s.c): generic: rtl8366: add enable_port helper
Jan 08 20:28:30 <CIA-77> juhosg * r24938 /trunk/target/linux/generic/files/drivers/net/phy/ (rtl8366_smi.c rtl8366_smi.h rtl8366rb.c rtl8366s.c): generic: rtl8366: enable ports only after VLAN configuration is done
Jan 08 20:28:33 <CIA-77> juhosg * r24939 /trunk/target/linux/generic/files/drivers/net/phy/ (rtl8366_smi.c rtl8366_smi.h rtl8366rb.c rtl8366s.c): generic: rtl8366: enable vlans before enabling the ports
Jan 08 20:45:58 <builder> build #47 of iop32x is complete: Exception [exception failed slave lost shell_13 compile_12]  Build details are at http://tksite.gotdns.org:8010/builders/iop32x/builds/47
Jan 08 20:45:59 <builder> build #47 of ifxmips is complete: Exception [exception failed slave lost shell_13 compile_12]  Build details are at http://tksite.gotdns.org:8010/builders/ifxmips/builds/47
Jan 08 20:46:01 <builder> build #46 of rdc is complete: Exception [exception failed slave lost shell_13 compile_12]  Build details are at http://tksite.gotdns.org:8010/builders/rdc/builds/46
Jan 08 20:50:07 <philipp64|laptop> xMff: no, I take it back. e2fsprogs breaks only when I do a parallel build... it doesn't break on a -j1.
Jan 08 20:50:42 <philipp64|laptop> this didn't use to be a problem.  I've not sifted through the commits for anything that might have destabilized it.
Jan 08 21:02:55 <xMff> tools/Makefile
Jan 08 21:03:13 <xMff> I bet someone added new deps and broke them up accidentally
Jan 08 21:03:32 <xMff> like  foo/bar/compile := ...
Jan 08 21:03:32 <xMff> ...
Jan 08 21:03:32 <xMff> foo/bar/compile := ...
Jan 08 21:03:39 <xMff> those should be joined
Jan 08 21:06:29 <CIA-77> juhosg * r24940 /trunk/target/linux/ar71xx/generic/profiles/ (buffalo.mk d-link.mk netgear.mk tp-link.mk): ar71xx: add kmod-ledtrig-usbdev to the relevant profiles
Jan 08 21:09:02 <CIA-77> juhosg * r24941 /trunk/target/linux/ar71xx/generic/profiles/planex.mk: ar71xx: add kmod-ledtrig-usbdev for the MZK-W04NU profile as well
Jan 08 22:31:42 <philipp64|laptop> [florian]: I'm not convinced r22382 worked.
Jan 08 22:35:10 <builder> build #48 of ep93xx is complete: Failure [failed compile_4]  Build details are at http://tksite.gotdns.org:8010/builders/ep93xx/builds/48
Jan 08 23:48:28 <Weedy> xMff: how do you do variable substitution in ash?
Jan 08 23:48:37 <xMff> as in bash
Jan 08 23:48:58 <xMff> #, ##, %, %%, /, // all work
Jan 08 23:49:05 <Weedy> test=${"$($ping google.ca | awk '/transmitted/ { print $4 }')":-0}
Jan 08 23:49:07 <Weedy> syntax error: bad substitution
Jan 08 23:49:24 <xMff> bah my eyes bleed
Jan 08 23:49:56 <xMff> it will not work this way. first $ping looks invalid
Jan 08 23:50:12 <xMff> and second, you *must* store the whole result in a variable first
Jan 08 23:52:26 <xMff> I'd do this:
Jan 08 23:52:30 <xMff> test=$(ping -c1 google.ca); test="${test#*, }"; test="${test%% *}"; echo "${test:-0}"
Jan 09 00:05:29 <Weedy> < xMff> bah my eyes bleed
Jan 09 00:05:31 <Weedy> :V
Jan 09 00:23:45 <EqUaTe> Weedy: generally $ping isn't going to work unless you've defined $ping as a variable previously..
Jan 09 00:28:16 <Weedy> i'm fairly used to coding sh, i just don't use variable substitution often
**** ENDING LOGGING AT Sun Jan 09 02:59:58 2011