**** BEGIN LOGGING AT Sat Feb 19 02:59:57 2011 Feb 19 03:27:39 build #76 of gemini is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/gemini/builds/76 Feb 19 03:39:53 build #64 of rdc is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/rdc/builds/64 Feb 19 06:31:58 build #88 of s3c24xx is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/s3c24xx/builds/88 Feb 19 08:50:39 kaloz * r25576 /trunk/package/dnsmasq/ (Makefile patches/101-ipv6.patch): [package/dnsmasq]: upgrade to 2.57 Feb 19 10:44:17 gmorning Feb 19 12:44:27 florian * r25579 /packages/net/vblade/ (Makefile files/vblade.config files/vblade.init): Feb 19 12:44:27 [package] vblade: change config to read-only Feb 19 12:44:27 This patch changes the default vbladed config to read-only. It Feb 19 12:44:27 circumvents data corruption in case of the accidental simultaneous rw Feb 19 12:44:27 mount. Feb 19 12:44:28 Signed-off-by: Paul Geraedts Feb 19 12:44:32 florian * r25581 /packages/utils/lcd4linux/Makefile: [package] lcd4linux: update to r1143, patch from Jonathan McCrohan Feb 19 12:44:49 florian * r25584 /trunk/target/linux/brcm63xx/ (2 files in 2 dirs): (log message trimmed) Feb 19 12:44:50 [brcm63xx] add support for 'MAGIC' bcm6348-based board Feb 19 12:44:50 I wrote a patch to add 96348SV board (aka MAGIC) support to trunk. Feb 19 12:44:50 In my case I've found it in a Telsey "Alice W-Gate" router, fairly common Feb 19 12:44:50 (in the past) in Italy. Feb 19 12:44:50 I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2 Feb 19 12:44:51 relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c ) Feb 19 12:44:59 florian * r25585 /trunk/toolchain/gdb/ (Makefile patches/600-fix-compile-flag-mismatch.patch): Feb 19 12:44:59 [toolchain] update gdb to 7.2 Feb 19 12:44:59 This patch updates the toolchain gdb from 6.8 to 7.2 Feb 19 12:44:59 Signed-off-by: Steve Brown Feb 19 12:49:28 florian * r25586 /packages/net/net-snmp/ (Makefile files/snmpd.init): [package] net-snmp: fix exec section execname -> name usage (#8882) Feb 19 12:50:10 [florian]: https://dev.openwrt.org/ticket/8212 <- ticket for the telsey magic (except it's for backfire) Feb 19 12:51:23 <[florian]> KanjiMonster: considering that attitude adjustment release will support it, I do not know whether it's worth doing a backport to backfire Feb 19 12:53:38 [florian]: probably not since the crc fix would also need to be backported, but the ticket should still be updated to reflect that the support is now in trunk (and won't be backported to backfire) Feb 19 12:56:32 <[florian]> KanjiMonster: right Feb 19 13:02:40 I wish somebody would fix mini_fo for 2.6.38-rc3 and later ;) Feb 19 13:03:22 build #76 of ps3 is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/ps3/builds/76 Feb 19 13:04:31 florian * r25587 /packages/ (5 files in 4 dirs): Feb 19 13:04:31 [package] muninlite: update to Version 1.0.4 (#8877) Feb 19 13:04:31 Signed-off-by: Andreas Oeldenberger Feb 19 13:05:47 [florian]: btw, there's still an empty directory SP500W in target/linux/brcm63xx/base-files/etc/defconfig Feb 19 13:06:13 <[florian]> KanjiMonster: that's due to me using git Feb 19 13:06:20 <[florian]> KanjiMonster: it does not remove empty directories Feb 19 13:12:29 florian * r25588 /trunk/target/linux/brcm63xx/base-files/etc/defconfig/SP500W/: [brcm63xx] remove empty directory SP500W Feb 19 13:18:53 [florian]: thanks Feb 19 13:53:32 florian * r25577 /trunk/ (10 files in 8 dirs): [kernel] update to 2.6.37.1 Feb 19 13:54:00 florian * r25578 /packages/net/ddns-scripts/ (Makefile files/usr/lib/ddns/dynamic_dns_updater.sh): (log message trimmed) Feb 19 13:54:00 [package] ddns-scripts: add https support to ddns-scripts Feb 19 13:54:00 adds a "use_https" and "cacert" option to the ddns-scripts package. Feb 19 13:54:00 when use_https is enabled, then curl is required to perform the update. Feb 19 13:54:00 the cacert option can be set to either a single file containing a trust Feb 19 13:54:00 signing authority certificate or a directory containing certificates Feb 19 13:54:01 which has been prepared with the usual c_rehash method. Feb 19 13:54:08 florian * r25580 /trunk/ (15 files in 12 dirs): [kernel] update to kernel 2.6.36.4 Feb 19 13:54:26 florian * r25582 /trunk/ (10 files in 7 dirs): [kernel] update to 2.6.35.11 Feb 19 13:55:02 florian * r25583 /trunk/ (23 files in 19 dirs): [kernel] update to 2.6.32.29 Feb 19 14:33:13 I'm having some trouble with serial usb devices. Feb 19 14:34:06 Would someone be able to show me how to tell hotplug to assign different ttyUSBx based on device id? Feb 19 14:42:42 build #78 of pxcab is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/pxcab/builds/78 Feb 19 15:06:00 Hello all Feb 19 15:07:00 I find what seems a bug (or not), but when i select strip unneccesary functions from librairy, some mandatory function seems to be removed Feb 19 15:07:34 for example when compiling dropbear as module, when installling and launching (or dropbearkey) with --help it just get stuck Feb 19 15:07:51 normal launch do the same thing and the process get stuck, eating 99% of cpu Feb 19 15:15:13 when disabling stripping, everything works Feb 19 15:41:22 jow * r25589 /trunk/scripts/download.pl: [scripts] download.pl: adjust kernel download urls for longterm and testing releases Feb 19 15:44:27 florian * r25590 /trunk/target/linux/brcm63xx/ (image/Makefile patches-2.6.35/451-board_hw553.patch): [brcm63xx] add support for HW553 bcm6358-based boards (#8844) Feb 19 15:51:30 build #77 of rb532 is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/rb532/builds/77 Feb 19 17:09:49 <_trine> is this another problem for the kirkwood compile Feb 19 17:09:51 <_trine> Resolving ftp.gnupg.org... 217.69.76.55 Feb 19 17:09:51 <_trine> Connecting to ftp.gnupg.org|217.69.76.55|:21... failed: Connection timed out. Feb 19 17:09:51 <_trine> Retrying. Feb 19 17:10:11 <_trine> --2011-02-19 17:09:17-- ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.4.5.tar.bz2 Feb 19 17:10:18 upgrade day for linux ftps ? :p Feb 19 17:10:56 <_trine> I think it might have just got past that now just as i posted it the code downloaded Feb 19 17:12:10 <_trine> bloody thing has stopped again Feb 19 17:12:59 _trine ftp download issues are not our fault Feb 19 17:13:07 <_trine> I know Feb 19 17:13:11 _trine: check your firewall Feb 19 17:13:20 <_trine> its not mine either Feb 19 17:13:40 <_trine> its started again now Feb 19 17:13:58 <_trine> its seems very hit and miss at the moment with the servers Feb 19 17:14:02 you can try this: Feb 19 17:14:10 export WGET_OPTIONS=--passive-ftp Feb 19 17:14:13 make ... Feb 19 17:14:34 <_trine> ok if I need to I will try that Feb 19 17:14:36 <_trine> thanks Feb 19 17:15:44 if i could find a mini pci usb controller :pp Feb 19 17:20:10 build #71 of uml is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/uml/builds/71 Feb 19 17:32:43 build #72 of x86 is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/x86/builds/72 Feb 19 18:10:59 nbd * r25591 /packages/net/xinetd/ (Makefile patches/003-rpc_fix.patch): xinetd: fix compiling without RPC support Feb 19 18:11:56 jow * r25592 /trunk/package/kernel/modules/other.mk: [package] kernel: remove bogus LINUX_2_6 dependency, thanks KanjiMonster for spotting this Feb 19 19:11:33 jow * r25593 /packages/net/miniupnpd/ (4 files in 2 dirs): [packages] miniupnpd: restart daemon if internal iface is ifup'd Feb 19 19:13:59 Do you think its a good id to submit a patch to support wifi cards having ff:ff:ff:ff:ff:ff mac address set in eeprom ? Feb 19 19:16:20 http://lxr.free-electrons.com/diff/drivers/net/wireless/ath/ath5k/eeprom.c?diffval=2.6.31;diffvar=v#1793 Feb 19 19:17:48 the L1821 condition could be modified to set a good "mac address" in this case... Feb 19 19:18:44 maybe based on pci vidpid... Feb 19 19:54:03 mb * r25594 /packages/net/xinetd/Makefile: xinetd: Fix compile w.r.t. RPC headers Feb 19 20:32:39 nbd * r25595 /trunk/target/linux/ar71xx/patches-2.6.32/110-usb-ehci-add-war-for-synopsys-hc-bug.patch: ar71xx: fix fallout from the 2.6.32 kernel upgrade Feb 19 22:15:49 jow * r25596 /trunk/include/toplevel.mk: [include] toplevel.mk: remove quotes from the release name, its up to its users to ensure proper quoting Feb 19 23:13:36 hm... 2.6.38 is missing lzma support for squashfs, but openwrt generates lzma compressed squashfs images Feb 19 23:22:07 when i do a parallel build, gcc, binutils always spawn off 3 gunzip/tar's Feb 19 23:22:13 simultaneously Feb 19 23:22:53 overwriting themselves Feb 19 23:24:02 whoot? Feb 19 23:24:22 How do they overwrite each other? Feb 19 23:24:30 concurrent dl processes Feb 19 23:24:36 we had that already, and fixed it already Feb 19 23:24:41 but might have crept in again Feb 19 23:25:25 i did a make download, before Feb 19 23:25:45 to make sure all sources were present before starting the build Feb 19 23:26:44 basically anything that compiles in the toolchain does it, binutils, gcc, uClibc Feb 19 23:27:27 dirtyfre1booter: Could you explain what you mean by "overwriting themselves"? Feb 19 23:27:56 the build spawns 3 simultaneous untar's of the same source Feb 19 23:28:26 http://openwrt.pastebin.com/Z3mtCELS Feb 19 23:28:57 during the prepare target of toolchain/uClibc Feb 19 23:29:22 ah ok. I get it. Feb 19 23:45:10 you are launching 3 make in same dir at same time ??? Feb 19 23:49:22 Epsylon3: no Feb 19 23:49:36 its the result of bad makefile and make -j16 Feb 19 23:49:54 it only happens with toolchain targets, not tools or packages Feb 19 23:50:10 oh -j ok Feb 19 23:50:27 when the toolchain need to be rebuilt ok Feb 19 23:50:45 yea, building from scratch Feb 19 23:51:03 woooo kmod-usb2 is breaking my orion router... erf, need serial... Feb 19 23:55:39 orion-ehci orion-ehci.0: Marvell Orion EHCI Feb 19 23:55:39 orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 Feb 19 23:55:45 and nothing after... Feb 19 23:56:31 weird, was working before Feb 19 23:58:38 damn reboot command doesnt works anymore Feb 20 00:08:55 hmm in fact reboot works again weird :) Feb 20 00:09:06 it doesnt works in failsafe mode i think Feb 20 00:09:23 correct Feb 20 00:09:39 there is no init active in failsave which would prcess the reboot command Feb 20 00:09:54 you can try "echo b > /proc/sysrq-trigger" next time Feb 20 00:10:01 :) Feb 20 00:10:05 sysrq is supported ? Feb 20 00:10:16 yes, it is even enabled by default on most targets Feb 20 00:10:28 nice to know :) Feb 20 00:10:30 sysupgrade uses it to ensure that the board really resets Feb 20 00:10:59 hmm Feb 20 00:11:09 in fact i think not in orion platform Feb 20 00:11:33 i had to active it to handle reset button Feb 20 00:11:46 but that doesnt works Feb 20 00:11:52 so i used a hotplug script Feb 20 00:12:06 with gpio-keys and button hotplug Feb 20 00:12:39 yea /proc/sys/ /proc/sysvipc/ Feb 20 00:12:44 no sysrq Feb 20 00:12:56 ok Feb 20 00:13:18 something to tell to kaloz Feb 20 00:13:20 :) Feb 20 00:13:32 to active sysrq in orion config Feb 20 00:14:27 or we could create a little tool which do a "hard" arm reboot Feb 20 00:14:39 could be better than the "unplug/replug" Feb 20 01:23:09 build #13 of lantiq is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/lantiq/builds/13 Feb 20 02:47:51 * swalker wonders if anyone still uses the original openser package rather than kamailio/opensips Feb 20 02:54:42 build #83 of ppc40x is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/ppc40x/builds/83 **** ENDING LOGGING AT Sun Feb 20 02:59:57 2011