**** BEGIN LOGGING AT Mon May 30 02:59:59 2011
May 30 03:18:41 <CIA-89> swalker * r27027 /packages/net/asterisk-1.8.x/Makefile: [packages] asterisk-1.8.x: remove stray comma
May 30 03:29:57 <swalker> thepeople: looks like luacurl went missing from #1683's checkin
May 30 03:35:16 <CIA-89> swalker * r27028 /packages/libs/rblibtorrent/Makefile: [packages] rblibtorrent: remove unnecessary misspelled build dependency
May 30 05:26:10 <russell--> is there linux-3 support yet?
May 30 05:26:26 <russell--> http://permalink.gmane.org/gmane.linux.kernel/1147415
May 30 05:34:10 <solca> russell--: don't think so... :)
May 30 07:32:31 <builder_> build #34 of ixp4xx is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/34
May 30 07:36:23 <blogic> russell--: soon
May 30 07:45:35 <russell--> blogic: /me really just spreading the news ;-)
May 30 07:51:17 <builder_> build #30 of etrax is complete: Failure [failed shell_4 compile_3]  Build details are at http://buildbot.openwrt.org:8010/builders/etrax/builds/30
May 30 07:51:47 <builder_> build #33 of kirkwood is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/33
May 30 07:56:09 <blogic> russell--: ah ok
May 30 07:56:10 <blogic> ;)
May 30 08:29:46 <KanjiMonster> http://article.gmane.org/gmane.linux.kernel/1147415 !
May 30 08:31:29 <stintel> o_O
May 30 08:44:51 <builder_> build #29 of ep93xx is complete: Failure [failed shell_4 compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/29
May 30 10:47:24 <builder_> build #35 of ar71xx is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/35
May 30 11:00:32 <mazilo> Who maintains Kamailio package?
May 30 11:01:41 <mazilo> Shouldn't the Kamailio package be updated to support Kamailio v3.1.4 (http://www.kamailio.org/w/2011/05/kamailio-v3-1-4-released/)?
May 30 13:39:43 <CIA-89> nbd * r27029 /trunk/package/mac80211/patches/512-ath9k_reduce_rxbuf.patch: ath9k: reduce the number of rx buffers, 512 is excessively high, 128 should work just as well, and will use a lot less memory
May 30 13:56:23 <CIA-89> kaloz * r27030 /trunk/target/linux/cns3xxx/ (16 files in 2 dirs): [cns3xxx]: upgrade to 2.6.39
May 30 14:02:26 <CIA-89> nbd * r27031 /branches/backfire/package/hostapd/ (19 files in 3 dirs): hostapd: backport current version from trunk as of r27021
May 30 15:03:06 <mazilo> Is trunk/target/linux/cns3xxx compatible with cavium csn2xxx used on a Hitachi SimpleNET?
May 30 16:19:37 <builder_> build #31 of iop32x is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/31
May 30 17:00:41 <builder_> build #35 of sibyte is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/35
May 30 17:03:15 <tripolar> nbd hi, you commit today a hostapd update - but after i installed it a have two devices mon.wlan0 and wlan0 - how can i just create wlan0?
May 30 17:05:04 <nbd> mon.wlan0 is necessary for AP mode with mac80211
May 30 17:05:11 <nbd> hostapd uses it
May 30 17:05:37 <solca> mon.wlan0 was always created in my APs AFAICT
May 30 17:06:15 <tripolar> nbd: okay thought it wasnt there befor the update ...
May 30 17:07:03 <nbd> yes, it has been like this for years now
May 30 17:07:28 <tripolar> okay - i nearly never you my wifi - just wanted to test hostapd after the update :)
May 30 17:07:35 <tripolar> you=use
May 30 17:17:21 <builder_> build #28 of mpc52xx is complete: Failure [failed shell_4 compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/28
May 30 17:29:13 <tripolar> thanks nbd
May 30 17:37:20 <tornado> nbd, hi. sorry for inconvenience. but I really need your help about madwifi. do you have time now?
May 30 17:44:29 <Epsylon3> so... its maybe time to install a patch review system like "gerrit" for patches :)
May 30 17:51:16 <builder_> build #35 of ar7 is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/35
May 30 18:11:03 <stintel> Epsylon3: there is already patchwork, afaik
May 30 18:12:42 <Epsylon3> oh yea, have seen that... from mailing list
May 30 18:13:09 <Epsylon3> but im no more on that... to many things i dont care
May 30 18:13:45 <KanjiMonster> gah, I hate shell script
May 30 18:13:48 <Epsylon3> there is one on cyanogen, its nice ::)
May 30 18:13:50 <stintel> KanjiMonster: :)
May 30 18:14:08 <Epsylon3> http://review.cyanogenmod.com/#q,status:open,n,z
May 30 18:14:22 <stintel> ah I'm using android revolution hd :)
May 30 18:14:48 <stintel> tried cm but went back to revo hd
May 30 18:15:34 <Epsylon3> working on a new cyanogen device :)
May 30 18:15:50 <Epsylon3> that works very well now :)
May 30 18:16:04 <Epsylon3> its only for the Desire HD ?
May 30 18:16:29 <Epsylon3> (motorola defy) thead has more that 1Million accesses ;)
May 30 18:16:38 <Epsylon3> http://forum.xda-developers.com/showthread.php?t=1033654&page=531
May 30 18:17:05 <Epsylon3> in a month
May 30 18:18:11 <Epsylon3> cm doesnt add as features as MIUI but the build system is very nice :)
May 30 18:18:15 <Epsylon3> and all on github
May 30 18:18:16 <Epsylon3> :)
May 30 18:18:22 <Epsylon3> (almost all)
May 30 18:18:53 <stintel> think it's only for the dhd yes, it's based on the htc firmware
May 30 18:18:55 <Epsylon3> graphically speaking
May 30 18:19:18 <Epsylon3> our version is based on the official kernel
May 30 18:19:29 <Epsylon3> but there are many kernels leaks from motorola
May 30 18:19:46 <swalker> mazilo: nobody iirc and yes it should be but that's not really practical
May 30 18:19:47 <Epsylon3> this part is still protected by signatures
May 30 18:19:58 <Epsylon3> but we can add modules
May 30 18:20:47 <KanjiMonster> stintel: I'm currently trying to fix openwrt for the new linux numbering system, and CompareKernelPatchVer is giving me headaches. It doesn't help that my shell scripting knowledge is almost nil
May 30 18:21:51 <Epsylon3> yea... still dont have understood all on openwrt dl/patch/build system
May 30 18:21:54 <Epsylon3> for the kernel
May 30 18:22:02 <stintel> KanjiMonster: cool, too bad about the headaches though
May 30 18:22:16 <stintel> but I guess my shell scripting knowledge isn't any better than yours :P
May 30 18:22:21 <Epsylon3> i still delete the linux source every time i test a patch
May 30 18:23:15 <Epsylon3> alias findinfiles='find -L -H . -printf "\"%p\"\n" -type f 2>/dev/null | grep -v "\.svn/" | xargs grep -insI '
May 30 18:23:19 <Epsylon3> ^^
May 30 18:23:40 <Epsylon3> this alias save me a lot of time
May 30 18:24:00 <Epsylon3> you type "findinfiles version"
May 30 18:24:08 <Epsylon3> or findinfiles version | grep kernel
May 30 18:24:17 <KanjiMonster> stintel: compilation works fine; the compare... is the last thing I want to fix before submitting patches (I already fixed the CONFIG_LINUX_<version> thingy; I won't fix compat-wireless that thinks this is a 2.4 kernel since it isn't a 2.6 one ;)
May 30 18:25:27 <Epsylon3> version.h
May 30 18:25:40 <Epsylon3> has a numeric value
May 30 18:26:03 <stintel> KanjiMonster: maybe I could have a look, dunno if I could be helpful though
May 30 18:26:07 <Epsylon3> must use "dc" or [[ ]] to compute value
May 30 18:26:18 <Epsylon3> hmm no
May 30 18:26:21 <Epsylon3> $(( )) i mean
May 30 18:26:51 <Epsylon3> echo $(( 5 + 4))
May 30 18:27:21 <KanjiMonster> stintel: the line in question is https://dev.openwrt.org/browser/trunk/include/kernel.mk#L170
May 30 18:28:07 <Epsylon3> "tr" ?
May 30 18:28:35 <Epsylon3> busybox tr
May 30 18:28:36 <Epsylon3> :)
May 30 18:28:37 <stintel> KanjiMonster: yeah was just looking there
May 30 18:28:44 <Epsylon3> Translate, squeeze, and/or delete characters from
May 30 18:28:46 <Epsylon3> standard input, writing to standard output
May 30 18:28:48 <Epsylon3> Options:
May 30 18:28:50 <Epsylon3> -c Take complement of STRING1
May 30 18:28:52 <Epsylon3> -d Delete input characters coded STRING1
May 30 18:28:54 <Epsylon3> -s Squeeze multiple output characters of STRING2 into one character
May 30 18:29:56 <KanjiMonster> stintel: at least there's also the option of replacing this with make script (whatever that is called)
May 30 18:30:42 <Epsylon3> tr doesnt seems to be a standard function...
May 30 18:30:53 <Epsylon3> i can compile openwrt, and i dont have it
May 30 18:31:27 <Epsylon3> ohh i ve it :p
May 30 18:31:41 <Epsylon3> just it doesnt show usage but an error without param
May 30 18:31:47 <Epsylon3> root@epsybox:/git/openwrt# tr
May 30 18:31:47 <Epsylon3> tr: opérande manquante
May 30 18:32:46 <Epsylon3> building android is almost as slow as openwrt ;) but that use more than 12GB of sources :p
May 30 18:33:01 <Epsylon3> and output a 100MB image
May 30 18:33:18 <Epsylon3> zipped image
May 30 18:33:31 <stintel> KanjiMonster: wow I already feel your headache
May 30 18:33:48 <Epsylon3> i use another PC ;)
May 30 18:34:06 <Epsylon3> the little openwrt's box is too slow
May 30 18:34:17 <Epsylon3> and x64 system is required... so
May 30 18:34:27 <Epsylon3> (for gingerbread)
May 30 18:34:34 <stintel> yeah I noticed
May 30 18:34:51 <stintel> there was this one tool I needed to build myself, can't remember which one though
May 30 18:34:54 <stintel> for flashing the radio
May 30 18:35:20 <Epsylon3> sbf_flash for motorola
May 30 18:35:37 <Epsylon3> (made by mbm)
May 30 18:38:04 <lamikr> I build openwrt image from trunk to wzr-hp-g300nh both with uclibc and eglibc couple of days ago. (For eglibc I needed to change gcc from linaro to codesourcery to avoid ld linking error in the end of eglibc build).
May 30 18:39:17 <lamikr> uclibc version started fine but with eglibc version I did not get telnet connection. Today I set up serial port to 300nh and I can see from console that eglibc boots just fine, problem is just that there is only the loopback network interface.
May 30 18:41:06 <lamikr> Does anybody have idea, why eth1, etc.. does not show up with this eglibc build. Here is the /etc/config/network: http://pastebin.com/tbkhpqhu
May 30 18:42:48 <lamikr> dmesg seems to show: eth0: unable to find MII bus on device 'rtl8366rb'
May 30 18:47:39 <KanjiMonster> lamikr: sounds you might need to try the 301 image
May 30 18:47:47 <Epsylon3> i use codesourcecy, had a problem some builds ago
May 30 18:47:59 <Epsylon3> with a rc2 rc3 link
May 30 18:48:10 <Epsylon3> a problem of ../../../
May 30 18:49:06 <lamikr> KanjiMonster Ok, I will try that with eglibc case. Strangely with uclibc case I was using 300nh build, not 301.
May 30 18:50:32 <KanjiMonster> lamikr: ah wait, it rather sounds like you used a 301 image
May 30 18:51:57 <Epsylon3> stats from my server :) http://stats.wdscript.fr/defy/2011/05/awstats.awstats.en.html
May 30 18:52:12 <Epsylon3> my nightly builds for the defy
May 30 18:52:23 <stintel> holy crap
May 30 18:52:41 <Epsylon3> 657.41 GB in 9.5 days
May 30 18:52:54 <stintel> you must have a cheap hosting isp then I guess
May 30 18:53:14 <Epsylon3> 19.95 per month for gigabit ethernet
May 30 18:53:16 <KanjiMonster> lamikr: look in your dmesg, does it say "MIPS: machine is Buffalo WZR-HP-G300NH" or "MIPS: machine is Buffalo WZR-HP-G301NH"?
May 30 18:53:22 <Epsylon3> gigabit internet
May 30 18:53:24 <Epsylon3> :)
May 30 18:53:32 <stintel> Epsylon3: traffic limit ?
May 30 18:53:36 <Epsylon3> no
May 30 18:53:39 <stintel> wtf ;/
May 30 18:53:45 <Epsylon3> france: )
May 30 18:54:08 <Epsylon3> but this offer is reserved to french customer
May 30 18:54:21 <Epsylon3> http://www.online.net/
May 30 18:54:32 <Epsylon3> dedicated server
May 30 18:54:55 <stintel> dirt cheap
May 30 18:55:00 <stintel> jebus
May 30 18:56:21 <Epsylon3> but ive some problems with irqs
May 30 18:56:37 <Epsylon3> at 450Mbps the cpu is at 100%
May 30 18:56:56 <Epsylon3> i should test a newer kernel...
May 30 18:56:57 <stintel> physical server or virtual
May 30 18:57:02 <Epsylon3> physical
May 30 18:57:09 <stintel> heh
May 30 18:57:18 <Epsylon3> Via Nano U2250
May 30 18:57:19 <stintel> how can they even make profit from it
May 30 18:57:27 <Epsylon3> http://en.community.dell.com/dell-blogs/direct2dell/b/direct2dell/archive/2009/05/19/dell-launches-quot-fortuna-quot-via-nano-based-server-for-hyperscale-customers.aspx
May 30 18:57:52 <Epsylon3> 15 Watts/server
May 30 18:57:54 <Epsylon3> ^^
May 30 18:58:16 <Epsylon3> 15-30W
May 30 18:58:33 <Epsylon3> 252 servers in a 42U rack.
May 30 18:58:39 <lamikr> KanjiMonster "MIPS: machine is Buffalo WZR-HP-G301NH" But ok, I may have done mistake while flashing. Just noticed that the eglibc_2.12 image I have used has been for 301nh: openwrt-ar71xx-generic-wzr-hp-g301nh-jffs2-tftp.bin
**** ENDING LOGGING AT Mon May 30 18:58:39 2011

**** BEGIN LOGGING AT Mon May 30 19:00:14 2011
May 30 19:12:03 <tripolar> hi
May 30 19:18:10 <Epsylon3> br-wifi0 Link encap:Ethernet HWaddr 00:16:41:19:23:AC
May 30 19:18:10 <Epsylon3> inet6 addr: fdca:ffee:babe:dada:216:41ff:fe19:23ac/64 Scope:Global
May 30 19:18:10 <Epsylon3> inet6 addr: fe80::216:41ff:fe19:23ac/64 Scope:Link
May 30 19:18:18 <Epsylon3> its a good ipv6 ?
May 30 19:26:58 <Epsylon3> damn iftop cant load libpcap in 27025
May 30 19:28:07 <Epsylon3> can't load library 'libpcap.so.1.0'
May 30 19:28:25 <Epsylon3> opkg files libpcap : /usr/lib/libpcap.so.1.1 /usr/lib/libpcap.so /usr/lib/libpcap.so.1.1.1
May 30 19:29:43 <Epsylon3> ok, a new link fixes the problem
May 30 19:43:52 <Epsylon3> the nice thing with gerrit is the auto email feature on merged change on a subproject
May 30 19:44:17 <Epsylon3> if i could have a filter on orion branch ;)
May 30 19:44:20 <Chocky> hi kids
May 30 19:44:43 <Epsylon3> hi
May 30 19:44:46 <Chocky> trying to build trunk against glibc.  There's a bunch of patches I need and have applied, found, but mysql fails:
May 30 19:44:51 <Chocky> init.c:(.text+0x2c): undefined reference to `__libc_csu_fini'
May 30 19:44:52 <Chocky> init.c:(.text+0x34): undefined reference to `__libc_csu_init'
May 30 19:46:20 <Epsylon3> :) fini
May 30 19:46:27 <Epsylon3> look like a french developper
May 30 19:46:28 <Chocky> hm, there's a bug on this, and it's claimed to be fixed
May 30 19:46:32 <Chocky> https://dev.openwrt.org/ticket/8342
May 30 19:47:00 <Epsylon3> "fin" = end in french
May 30 19:47:06 <Chocky> yes, yes
May 30 19:47:19 <Epsylon3> but could be "function init"
May 30 19:47:35 <Chocky> no kidding. but not helpful
May 30 19:48:31 <Epsylon3> http://books.google.fr/books?id=0FW3DMNhl1EC&pg=PA185&lpg=PA185&dq=csu_fini&source=bl&ots=tt_yI_EZXv&sig=H3eBXfJkDSt5KHDNEWC5tw532rU&hl=fr&ei=V_TjTZWgBcqa8QPYytWXBw&sa=X&oi=book_result&ct=result&resnum=1&ved=0CBwQ6AEwAA#v=onepage&q=fini&f=false
May 30 19:49:34 <Epsylon3> http://www.redhat.com/archives/taroon-list/2004-September/msg00004.html
May 30 19:49:56 <Chocky> fantastic.  but completely irrelevant
May 30 19:50:04 <Chocky> can someone help who has a clue?  thanks.
May 30 19:50:23 <Chocky> the patch mentioned in that bug is applied here, so it's not that
May 30 19:50:26 <Epsylon3> busybox strings *libc.so | grep csu_init
May 30 19:50:53 <Chocky> ep: look, I don't give a shit about your random help.  it's obvious you're just guessing out your arse
May 30 19:51:43 <Epsylon3> ok, good luck
**** ENDING LOGGING AT Mon May 30 20:11:13 2011

**** BEGIN LOGGING AT Mon May 30 20:12:15 2011
May 30 20:20:19 <solca> Chocky: check if it's in libgcc
May 30 20:20:43 <Chocky> hm
May 30 20:20:49 <Chocky> but it's a g++ function though, right?
May 30 20:23:09 <Chocky> I don't see it in libgcc.a
**** BEGIN LOGGING AT Tue May 31 07:34:15 2011
**** BEGIN LOGGING AT Tue May 31 07:48:14 2011
May 31 08:15:35 <EqUaTe> ^Willie^: try connecting at 9600,8n1. w/o changing the kernel boot options.
May 31 08:16:20 <EqUaTe> you're presuming that the info you've found so far is correct. that may not be the case.
May 31 08:17:03 <KanjiMonster> philipp64|laptop: since yesterday. don't you read news? ;)
May 31 08:17:46 <EqUaTe> and it's at rc1 already
May 31 08:20:11 <KanjiMonster_> The code name of this one is relatively tame ("sneaky weasel")
May 31 08:20:27 <EqUaTe> heh
May 31 08:22:19 <KanjiMonster> I dunno why, but it seems to use a bit less memory after booting (~7MB used vs. ~10 MB with 2.6.39, according to free)
May 31 08:22:54 <EqUaTe> maybe they've rewritten some things to be more stable? (we can but hope..)
May 31 08:25:09 <EqUaTe> s/stable/memory efficient/
May 31 08:25:12 <EqUaTe> i hate mornings.
May 31 08:34:33 <builder_> build #47 of brcm63xx is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/47
May 31 08:39:24 <^Willie^> EqUaTe: hmm hard coded is a verry short story i guess..
May 31 08:40:27 <^Willie^> EqUaTe: also it looks like that the pin header 2X5 is linked to some of the panel leds.
May 31 08:40:50 <^Willie^> weird part.. on the dev boards there is a 3 pin header and on the oem board not..
May 31 08:41:30 <^Willie^> or it is the i2c data i'm reading on the serial link :(
May 31 08:42:26 <^Willie^> elso tested 9600 and 4800 baud.. aswel 7n1/7e1 instaid of 8n1
May 31 08:49:24 <^Willie^> EqUaTe: i can look around for a logic analyzer but have the feeling people dislike the brandname for noreason..
May 31 08:49:51 <^Willie^> cause if people yell broadcom people jump on them..
May 31 08:53:47 <builder_> build #41 of ps3 is complete: Failure [failed shell_4 compile_3]  Build details are at http://buildbot.openwrt.org:8010/builders/ps3/builds/41
May 31 09:22:30 <KanjiMonster> ^Willie^: if you are getting rubbish until the kernel boots, it sounds a bit as if the bootloader uses different speed/settings than the kernel
May 31 09:26:20 <^Willie^> KanjiMonster: nope at 3 gpio pins i do get data but can't read anything at all.. more or less the same amounth as a regulair boot log.
May 31 09:26:47 <^Willie^> and wat ubicom call's "turbo 2 wire" will be i2c ..
May 31 09:27:17 <^Willie^> can be logic that there is no serial uart on the customer board when there is a seperate header on the dev boards.
May 31 09:30:41 <KanjiMonster> probably saved them half a cent per board or something like that;)
May 31 09:31:08 <^Willie^> hmm i do notices a few missing resistors around the cpu at the side where the leds are..
May 31 09:34:05 <^Willie^> KanjiMonster: also any idea where i can find those other guys owning ubicom hw running nonstock firmware ?
May 31 09:35:21 <KanjiMonster> nope
May 31 09:35:40 <^Willie^> i have seen that there is a ubicom build in the svn tree
May 31 09:35:59 <^Willie^> wonder how and who did that..
May 31 09:37:07 <KanjiMonster> according to the dev wik, {Nico}_ is the maintainer for ubicom
May 31 09:37:28 <KanjiMonster> you could also try your luck at http://developer.ubicom.com/forums/ but it doesn't look exactly alive
May 31 09:37:37 <^Willie^> 1300 users there indeed..
May 31 09:37:45 <^Willie^> +- 150 posts :S
May 31 09:41:04 <^Willie^> KanjiMonster: guess nico is idle all the time :(
May 31 09:41:20 <^Willie^> openwet powered ? -> idle time: 57d
May 31 09:41:31 <^Willie^> openwet*openwrt
May 31 09:47:34 <CIA-89> mirko * r27036 /trunk/target/linux/lantiq/ (6 files in 3 dirs):
May 31 09:47:34 <CIA-89> purge out CONFIG_CRYPTO* symbols out of target specific kernel configs
May 31 09:47:34 <CIA-89> since OpenWrt is taking care of them
May 31 11:07:02 <KanjiMonster> nbd: ping
May 31 11:07:57 <nbd> pong
May 31 11:11:16 <KanjiMonster> nbd: I've thought long about it, and I came to the conclusion it does make sense for me getting svn access to trunk (I feel a bit more confident about my code quality) - what do I have to do?
May 31 11:14:03 <nbd> kaloz is the one that gives out svn access
May 31 11:14:54 <KanjiMonster> okay, then I'll bug him
May 31 11:59:34 <stintel> KanjiMonster: as long as u don't bug trunk ;-)
May 31 12:06:45 <KanjiMonster> stintel: I promise I'll do it only every other commit ;)
May 31 12:07:19 <stintel> :D
May 31 12:09:15 <KanjiMonster> madwifi, you are not making sense: "Checking kernel configuration... FAILED | Only kernel versions 2.4.x and above are supported. | You have 3.0.0-rc1."
May 31 12:10:47 <stintel> ah good old madwifi :)
May 31 12:11:12 <KanjiMonster> "grep -q -i '^[2-9]\.[4-9]\.'" <- oh, but 3.4.0 would have been fine
May 31 12:14:12 <blogic> KanjiMonster: good idea
May 31 12:14:25 <blogic> KanjiMonster: your constant flood of mails is annoying :D
May 31 12:17:27 <KanjiMonster> blogic: you won't get totally spared though, if I don't find a good solution I'll still post it as a RFC/RFT ;)
May 31 12:17:49 <stintel> :P
May 31 12:19:52 <KanjiMonster> mh, eventually we should try to get some of the linux/generic/ stuff upstream:  "2.0M    patches-3.0/"
May 31 12:20:51 <acoul1> http://paste.pocoo.org/show/398238/
May 31 12:21:49 <builder_> build #44 of brcm47xx is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/44
May 31 12:23:39 <blogic> KanjiMonster: yes, we need to upstream
May 31 12:23:42 <blogic> lots
May 31 12:27:40 <KanjiMonster> acoul1: the option MTD_PARTITIONS went away (partition support is now always there), you probably still have the ifdef checks in place diabling the auto rootfs and rootfs split code (iirc)
May 31 12:28:41 <acoul1> http://paste.pocoo.org/show/398241/
May 31 12:29:17 <acoul1> I think it's the target/linux/generic/patches-3.0/400-rootfs_split.patch
May 31 12:31:32 <builder_> build #43 of atheros is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/43
May 31 12:36:59 <gzanan> acoul:something worong with latest uclibc git from your git.
May 31 12:41:04 <KanjiMonster> acoul1: http://inuyasha.ath.cx/~jonas/400-rootfs_split.patch <- that's my version of it
May 31 12:41:44 <KanjiMonster> and it's working fine on bcm63xx
May 31 12:41:54 <gzanan> http://pastebin.com/GPLTYh4Z
May 31 12:42:03 <builder_> build #41 of pxcab is complete: Failure [failed shell_4 compile_3]  Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/41
May 31 12:43:48 <blogic> KanjiMonster: is there a series i can test for lantiq ?
May 31 12:44:01 <KanjiMonster> blogic: sure
May 31 12:44:18 <blogic> where ?
May 31 12:44:19 <blogic> ;)
May 31 12:45:38 <acoul1> @KanjiMonster: thanks, it helps a lot
May 31 12:47:58 <nbd> russell--: ping
May 31 12:49:46 <KanjiMonster> Kaloz: ping
May 31 12:52:24 <acoul1> @gzanan: lower your overclock settings
May 31 13:02:41 <acoul1> @KanjiMonster: http://paste.pocoo.org/show/398271/
May 31 13:06:16 <KanjiMonster> acoul1: that looks good :)
May 31 13:12:39 <gzanan> I haven't set anything about overclock .
May 31 13:15:19 <acoul1> @gzanan: perhaps your CPU is overheating? it looks as a hardware issue?  can you recreate the exact same error after a distclean?
May 31 13:17:34 <gzanan> I have successfully compiled  three images before update with this latest uclibc git.
May 31 13:19:31 <gzanan> With the same computer.
May 31 14:12:40 <mazilo> Has there been an MP4 library ported on OpenWRT?
May 31 14:19:33 <KanjiMonster> mazilo: doesn't libffmpeg provide it?
May 31 14:20:44 <mazilo> KanjiMonster: I was looking for mp4.h file and libffmpeg (or ffmpeg git version source package) doesn't seem to come with mp4.h file.
May 31 14:24:32 <mazilo> KanjiMonster: It looks like faad2-2.7/libfaad/mp4.h has it.
May 31 14:54:21 <builder_> build #41 of lantiq is complete: Failure [failed shell_4 compile_6]  Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/41
May 31 15:30:02 <^Willie^> KanjiMonster: *ping* back from the hobby room..
May 31 15:31:20 <^Willie^> KanjiMonster: was digging up some more information.. the flash chip for example mx25l64 64mb i2c flash but sda/sdcl where not connected to the debug header.. looks like it was no i2c wat i had onscreen so dunno
May 31 15:32:35 <^Willie^> but do know there must be an other pin pad that i have not seen jet..
May 31 15:33:42 <^Willie^> best i can get out of it is look like -> -0-|-1-|-0-|-1-
May 31 15:34:10 <^Willie^> not look luke uart to me..
May 31 15:34:16 <^Willie^> luke/like*
May 31 15:35:39 <Chocky> moo, moo and more moo
May 31 15:37:14 <^Willie^> larry the cow ?
May 31 15:38:25 <Chocky> sure
May 31 15:44:31 <russell--> nbd: pong
May 31 15:53:45 <nbd> russell--: could you please try current ath5k in trunk again to see if it fixes your crash issue?
May 31 16:02:06 <philipp64|laptop> nbd: can you please commit the two cs553x patches?
May 31 16:12:18 <russell--> nbd, yes ... standby
May 31 16:13:55 <russell--> but not too attentively, will have to rev up and rebuild, etc
May 31 16:49:10 <nbd> philipp64|laptop: since you're enabling CONFIG_PATA_CS5536 in the config for the relevant subtargets, what do you still need the kmod-pata-cs5536 package for?
May 31 16:50:05 <philipp64|laptop> in case there are other platforms (like FRI) that need it too, but boot initially from NAND.
May 31 16:50:19 <nbd> ah, ok
May 31 16:50:42 <philipp64|laptop> cshore is working on the way sysupgrade works on the x86, and it might  mean using an initrd image, I'm not sure.
May 31 16:51:14 <philipp64|laptop> in which case, even the kernel can load modules that are required for booting.
May 31 16:53:05 <Chocky> mooo!
May 31 16:57:07 <CIA-89> nbd * r27037 /trunk/ (6 files in 5 dirs):
May 31 16:57:07 <CIA-89> x86: remove pata-amd driver from generic x86 images, add addition cs553x modules
May 31 16:57:07 <CIA-89> The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.
May 31 16:57:07 <CIA-89> Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).
May 31 16:57:07 <CIA-89> Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
May 31 16:57:11 <CIA-89> nbd * r27038 /trunk/target/linux/x86/ (alix2/target.mk geos/target.mk):
May 31 16:57:11 <CIA-89> x86: add additional companion chip drivers to alix2 and geos
May 31 16:57:11 <CIA-89> Add the MFGPT high precision timers, and integration into the schedule (clock events).
May 31 16:57:11 <CIA-89> Use OHCI, not UHCI usb module.
May 31 16:57:11 <CIA-89> Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.
May 31 16:57:12 <CIA-89> Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
May 31 17:01:14 <philipp64|laptop> nbd: thanks!
May 31 17:10:02 <russell--> nbd, that looks like it fixed it!
May 31 17:10:15 <russell--> which rev was that?
May 31 17:14:25 <russell--> the fast channel change?
May 31 17:16:13 <russell--> nbd++
May 31 17:19:40 * Chocky dances like a moo
May 31 17:24:02 <nbd> russell--: yes
May 31 17:26:27 <russell--> sweet
May 31 17:31:59 <russell--> interesting that the same problem doesn't affect x86
May 31 18:00:30 <Chocky> x86 is a world unto its own
May 31 18:52:02 <builder_> build #28 of octeon is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/28
May 31 20:14:56 <builder_> build #45 of s3c24xx is complete: Failure [failed shell_4 compile_10]  Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/45
May 31 20:19:30 <builder_> build #39 of x86 is complete: Failure [failed shell_4 compile_1]  Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/39
May 31 20:21:26 <KanjiMonster> *prepares to annoy blogic more*
May 31 20:21:42 <blogic> ok
May 31 20:21:46 <blogic> go for it tiger
May 31 20:21:50 <blogic> :D
May 31 20:23:51 <KanjiMonster> only seven patches (+ a cover letter) ;)
May 31 20:24:20 <blogic> hehe
May 31 20:24:45 <blogic> KanjiMonster: i found 1 more fix we need to add
May 31 20:24:50 <blogic> i am still testing 3.0
May 31 20:24:59 <blogic> but looks like some mtd headers got screwed
May 31 20:24:59 <KanjiMonster> great
May 31 20:25:02 <blogic> the fix will be in rc2
May 31 20:25:13 <blogic> but we should add the fix for rc1
May 31 20:25:17 <blogic> anyhow, more tomorrow
May 31 20:25:18 <blogic> nitey
May 31 20:25:47 <KanjiMonster> good night
May 31 21:01:27 <russell--> loot arrived
May 31 21:12:34 <fullstop> jow_laptop: are you around?
May 31 21:41:27 <builder_> build #41 of orion is complete: Failure [failed shell_4 compile_7]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/41
May 31 22:53:16 <CIA-89> juhosg * r27039 /trunk/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h:
May 31 22:53:16 <CIA-89> ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define
May 31 22:53:16 <CIA-89> Reported-by: Dave Täht <dave.taht@gmail.com>
May 31 22:53:16 <CIA-89> juhosg * r27040 /trunk/target/linux/ar71xx/files/drivers/net/ag71xx/ (ag71xx.h ag71xx_debugfs.c ag71xx_main.c): ar71xx: ag71xx: prepare to make ring sizes configurable
May 31 22:53:17 <CIA-89> juhosg * r27041 /trunk/target/linux/ar71xx/files/drivers/net/ag71xx/ (ag71xx.h ag71xx_ethtool.c): ar71xx: ag71xx: make ring sizes configurable via ethtool
May 31 22:53:18 <CIA-89> juhosg * r27042 /trunk/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh: ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
May 31 22:53:20 <CIA-89> juhosg * r27043 /trunk/target/linux/ar71xx/base-files/etc/diag.sh: ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
May 31 22:53:21 <CIA-89> juhosg * r27044 /trunk/target/linux/ar71xx/files/include/linux/ath9k_platform.h: ar71xx: sync ath9k_platform_data.h with compat-wireless
May 31 22:53:22 <CIA-89> juhosg * r27045 /trunk/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar9xxx-wmac.c: ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
May 31 22:53:23 <CIA-89> juhosg * r27046 /trunk/package/mac80211/Makefile: mac80211: make ath9k available even if PCI support is disabled
May 31 22:53:24 <CIA-89> juhosg * r27047 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: reduce the size of the squashfs-4k binaries
May 31 22:53:26 <CIA-89> juhosg * r27048 /trunk/target/linux/ar71xx/ (config-2.6.37 config-2.6.38 files/arch/mips/ar71xx/Kconfig): ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
May 31 22:53:28 <CIA-89> juhosg * r27049 /trunk/target/linux/ar71xx/files/drivers/mtd/wrt160nl_part.c: (log message trimmed)
May 31 22:53:28 <CIA-89> ar71xx: Fix header offset for newer WRT160NL models
May 31 22:53:28 <CIA-89> Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
May 31 22:53:28 <CIA-89> resulting in miscalculated partition sizes.
May 31 22:53:28 <CIA-89> Since the actual sizes did not change, hardcode them to their current
May 31 22:53:28 <CIA-89> sizes, and make sure they are at least one erase block big (in case Cisco
May 31 22:53:28 <CIA-89> decides to start to use chips with 128K erase blocks).
May 31 22:53:31 <CIA-89> juhosg * r27050 /trunk/tools/firmware-utils/ (5 files in 2 dirs): tools/firmware-utils: add buffalo specific fw tools
May 31 22:53:31 <CIA-89> juhosg * r27051 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
May 31 22:53:31 <CIA-89> juhosg * r27052 /trunk/tools/firmware-utils/src/mkdniimg.c:
May 31 22:53:31 <CIA-89> tools/firmware-utils: add support for hd_id tag into mkdniimg
May 31 22:53:31 <CIA-89> Signed-off-by: Mark Mentovai <mark@moxienet.com>
May 31 22:53:32 <CIA-89> juhosg * r27053 /trunk/target/linux/ar71xx/image/Makefile: (log message trimmed)
May 31 22:53:33 <CIA-89> ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
May 31 22:53:33 <CIA-89> NETGEAR doesnÂ’t produce a distinct North American image for
May 31 22:53:44 <CIA-89> juhosg * r27063 /trunk/target/linux/ar71xx/files/arch/mips/ (ar71xx/devices.c include/asm/mach-ar71xx/ar71xx.h): ar71xx: add ethernet initialization for the AR933X SoCs
May 31 22:53:46 <CIA-89> juhosg * r27064 /trunk/target/linux/ar71xx/files/arch/mips/ (ar71xx/dev-ar9xxx-wmac.c include/asm/mach-ar71xx/ar71xx.h): ar71xx: add WMAC initialization code for the AR933X SoCs
May 31 22:53:49 <CIA-89> juhosg * r27065 /trunk/target/linux/ar71xx/ (5 files in 4 dirs): ar71xx: add serial driver for the AR933X UART
May 31 22:53:49 <CIA-89> juhosg * r27066 /trunk/target/linux/ar71xx/files/arch/mips/ar71xx/devices.c: ar71xx: register UART for the AR933X SoCs
May 31 22:53:50 <CIA-89> juhosg * r27067 /trunk/target/linux/ar71xx/ (6 files in 2 dirs): ar71xx: add support for the AP121/AP121-MINI reference boards
May 31 22:53:51 <CIA-89> juhosg * r27068 /trunk/target/linux/ar71xx/base-files/ (5 files in 3 dirs): ar71xx: add default network config for the AP121 boards
May 31 22:53:52 <CIA-89> juhosg * r27069 /trunk/target/linux/ar71xx/base-files/lib/upgrade/platform.sh: ar71xx: add sysupgrade support for the AP121 boards
May 31 22:53:53 <CIA-89> juhosg * r27070 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: build images for the AP121 boards
May 31 23:07:36 <CIA-89> nbd * r27071 /trunk/package/mac80211/ (26 files in 2 dirs): mac80211: update to wireless-testing 2011-05-27
May 31 23:50:07 <builder_> build #41 of ramips is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/41
May 31 23:55:40 <CIA-89> kaloz * r27072 /trunk/target/linux/cns3xxx/patches/054-cns3xxx_pcie_clock.patch: [cns3xxx]: fixup pcie clock, thanks Chris
Jun 01 00:14:46 <builder_> build #40 of ppc40x is complete: Exception [exception interrupted]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/40
Jun 01 00:14:46 <builder_> build #38 of ppc44x is complete: Exception [exception shell_4 interrupted]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/38
Jun 01 00:18:49 <builder_> build #40 of rb532 is complete: Exception [exception shell_4 interrupted]  Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/40
Jun 01 00:18:49 <builder_> build #35 of avr32 is complete: Exception [exception interrupted]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/35
Jun 01 00:19:04 <builder_> build #36 of ar7 is complete: Failure [failed shell_4 compile_6]  Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/36
Jun 01 02:23:26 <CIA-89> nbd * r27073 /trunk/target/linux/generic/ (3 files in 3 dirs): m25p80: add the chip id for the winbond w25q128 chip
Jun 01 02:23:30 <CIA-89> nbd * r27074 /trunk/target/linux/generic/ (3 files in 3 dirs): fix a crash in mtd_concat when the .sync op is not implemented
Jun 01 02:23:34 <CIA-89> nbd * r27075 /trunk/target/linux/ar71xx/ (5 files in 2 dirs): ar71xx: add kernel support for the buffalo wzr-hp-ag300h
Jun 01 02:23:38 <CIA-89> nbd * r27076 /trunk/target/linux/ar71xx/ (generic/profiles/buffalo.mk image/Makefile): ar71xx: add profile and image building code for wzr-hp-ag300h
**** ENDING LOGGING AT Wed Jun 01 02:59:56 2011