**** BEGIN LOGGING AT Sat Jun 11 02:59:57 2011
Jun 11 03:01:52 <builder_> build #32 of mpc52xx is complete: Failure [failed shell_4 compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/32
Jun 11 07:09:44 <builder_> build #46 of orion is complete: Failure [failed compile_7]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/46
Jun 11 07:55:20 <builder_> build #32 of rdc is complete: Failure [failed compile_7]  Build details are at http://buildbot.openwrt.org:8010/builders/rdc/builds/32
Jun 11 08:47:35 <builder_> build #51 of at91 is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/51
Jun 11 09:08:41 <builder_> build #50 of ubicom32 is complete: Failure [failed shell_4 compile_3]  Build details are at http://buildbot.openwrt.org:8010/builders/ubicom32/builds/50
Jun 11 11:54:04 <builder_> build #44 of x86 is complete: Failure [failed compile_1]  Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/44
Jun 11 12:00:49 <KanjiMonster> Hauke: I updated the serial flash patch (missed a chunk in driver_mipscore.c)
Jun 11 12:01:19 <Hauke> KanjiMonster: ok thank you
Jun 11 12:01:54 <Hauke> I will work on a new version of the  patch adding embedded device support to bcma
Jun 11 12:02:08 <Hauke> before the serial flash
Jun 11 12:02:24 <KanjiMonster> no hurry with it ;)
Jun 11 12:02:58 <KanjiMonster> I'm busy with bcm5325 support and soon bcm6328
Jun 11 12:16:28 <KanjiMonster> Hauke: I assume bcm47xx serial flash won't be backported to backfire, right? (I'm about to change #8598's to wontfix and point to #7246 ("Missing support for broadcom serial flash support for brcm47xx target"))
Jun 11 12:16:52 <xMff> KanjiMonster: unlikely, else we have to drag out the release even further
Jun 11 12:17:04 <Hauke> KanjiMonster: no I do not plan to backport that to backfire
Jun 11 12:17:10 <KanjiMonster> okay, good
Jun 11 12:17:12 <xMff> and that would kind of prevent us from ever work on the next release
Jun 11 12:31:58 <builder_> build #43 of uml is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/43
Jun 11 13:25:48 <CIA-73> nbd * r27155 /trunk/toolchain/gdb/patches/ (2 files): toolchain/gdb: fix compile for powerpc targets, refresh patch
Jun 11 14:16:55 <CIA-73> mirko * r27156 /packages/utils/mtd-utils/Makefile: [packages/mtd-utils] split mtd-utils into its single components
Jun 11 16:25:07 <luka12345|wiik> blogic: ping
Jun 11 17:34:49 <blogic> luka12345|wiik: pong
Jun 11 17:44:19 <builder_> build #32 of octeon is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/32
Jun 11 18:04:36 <luka12345|wiik> blogic: did you have time to do anything with sx763
Jun 11 18:30:49 <blogic> not yet
Jun 11 18:30:52 <blogic> will do tonight
Jun 11 18:30:57 <blogic> its been a busy week
Jun 11 18:36:19 <luka12345|wiik> ok
Jun 11 18:36:45 <luka12345|wiik> i'm wondering what are you going to first?
Jun 11 18:37:09 <luka12345|wiik> connect with jtag? or serial? extract image?
Jun 11 18:37:32 <luka12345|wiik> what is the best practice when facing new device?
Jun 11 18:39:04 <blogic> installing owrt ?
Jun 11 18:40:44 <luka12345|wiik> ok...
Jun 11 18:42:46 <blogic> i iwll boot a ramdisk, make a copy of the eeprom, create a machfile and then make wifi work
Jun 11 18:42:53 <blogic> and at that point it is done i guess
Jun 11 18:43:39 <luka12345|wiik> on the boards i have sent you
Jun 11 18:43:53 <blogic> yes
Jun 11 18:43:56 <blogic> that is the paln
Jun 11 18:44:02 <blogic> 1 should work ootb ?
Jun 11 18:44:02 <luka12345|wiik> third uboot i have put there has overwritten some of the flash
Jun 11 18:44:17 <blogic> hope you did not break the atrheros eeprom data
Jun 11 18:44:38 <luka12345|wiik> I can send you entire working image
Jun 11 18:44:44 <luka12345|wiik> if that helps
Jun 11 18:44:46 <blogic> no
Jun 11 18:44:51 <blogic> the atheros eep is board specific
Jun 11 18:45:02 <blogic> every wifi card needs to be seperatly calibrated
Jun 11 18:45:38 <luka12345|wiik> what are you saying that no two sx763 boards are the same?
Jun 11 18:45:55 <blogic> yes
Jun 11 18:46:26 <luka12345|wiik> then i hope that i did not overwrite anything important...
Jun 11 18:48:11 <luka12345|wiik> but i'm wondering why every board must have different atheros data?
Jun 11 18:48:31 <luka12345|wiik> is it because of wireless mac address?
Jun 11 18:54:48 <blogic> because of the calibration data
Jun 11 18:58:02 <luka12345|wiik> i have compared 2 arteep.bin files that Delboy says are used for wireless calibration data and they are the same...
Jun 11 19:01:01 <luka12345|wiik> the file i'm talking about is uploaded here: https://code.google.com/p/sx76x-openwrt-danube/source/browse/trunk/wlan/arteep.bin
Jun 11 19:06:25 <philipp64|laptop> can I get a commit on 1060 please? it's a one-liner.
Jun 11 19:18:55 <blogic> nbd: what are the chances of 2 ar2317 eep being the sam e?
Jun 11 19:30:42 <Delboy> blogic: just checked another sx763, again same arteeb.bin as those 2
Jun 11 19:30:56 <blogic> ok
Jun 11 19:30:58 <blogic> strange
Jun 11 19:30:59 <nbd> the manufacturer was probably lazy
Jun 11 19:31:39 <blogic> ok
Jun 11 19:31:46 <blogic> ermm
Jun 11 19:31:57 <blogic> that means wifi perfoamnce will suck on those units though
Jun 11 19:32:57 <luka12345|wiik> there are at least ~50000 units in production
Jun 11 19:44:26 <blogic> amazing
Jun 11 20:10:54 <blogic> luka12345|wiik: so apart form wifi it all works ?
Jun 11 20:17:15 <Delboy> usb is also not working without that patch in dwc_otg
Jun 11 20:18:07 <blogic> define "not working"
Jun 11 20:18:07 <luka12345|wiik> except usb like Delboy says i could not get to work dsl
Jun 11 20:18:23 <Delboy> no power on port
Jun 11 20:18:31 <blogic> and dsl ?
Jun 11 20:18:35 <luka12345|wiik> yes
Jun 11 20:18:44 <blogic> what does not work there ?
Jun 11 20:19:09 <luka12345|wiik> i already have working config file on ar7 target
Jun 11 20:19:15 <luka12345|wiik> and the same configuration did not work
Jun 11 20:19:32 <luka12345|wiik> i think i have enabled all correctly in "make menuconfig"
Jun 11 20:19:38 <blogic> ?
Jun 11 20:19:45 <blogic> define "did not work"
Jun 11 20:19:57 <blogic> the more explicit you are the less i need to ask
Jun 11 20:20:04 <luka12345|wiik> ok
Jun 11 20:20:16 <blogic> did it get a link
Jun 11 20:20:19 <luka12345|wiik> i'll post dmesg somewhere
Jun 11 20:20:22 <blogic> ok
Jun 11 20:28:35 <luka12345|wiik> blogic: here - http://pastebin.lukaperkov.net/openwrt/openwrt-sx763-dmesg.out
Jun 11 20:30:21 <luka12345|wiik> blogic: can you tell me what kind of debug would be helpfull once i connect the dsl cable
Jun 11 20:34:06 <blogic> does it give you a link message when the unit gets dsl ?
Jun 11 20:34:17 <blogic> also those oopses are funny ;)
Jun 11 20:34:54 <luka12345|wiik> i dont remember that it gave me any kind of link message
Jun 11 20:35:32 <luka12345|wiik> if you mean this [<8014fc68>] 0x8014fc68
Jun 11 20:35:36 <luka12345|wiik> for oopses
Jun 11 20:35:39 <blogic> yes
Jun 11 20:35:48 <luka12345|wiik> that is only since the recent kernel upgrade
Jun 11 20:35:59 <blogic> yes
Jun 11 20:36:04 <blogic> you did not update your paztches
Jun 11 20:36:15 <luka12345|wiik> before the version 2.39.* i dont remember which one it was
Jun 11 20:36:18 <blogic> this patch is a complete mess
Jun 11 20:36:21 <blogic> ;)
Jun 11 20:36:27 <blogic> let me clean it up
Jun 11 20:36:38 <luka12345|wiik> i'm a messy guy
Jun 11 20:36:40 <luka12345|wiik> :D
Jun 11 20:38:06 <luka12345|wiik> i did update patches a bit... until i got no compile errors
Jun 11 20:38:55 <blogic> i have the pcb with 3 wires now
Jun 11 20:39:00 <blogic> which is gnd tx rx
Jun 11 20:39:00 <blogic> ?
Jun 11 20:39:43 <Delboy> http://wiki.openwrt.org/_media/toh/gigaset/sam5943.jpg
Jun 11 20:40:03 <Delboy> gnd is that on jtag connector
Jun 11 20:40:05 <luka12345|wiik> http://wiki.openwrt.org/_media/toh/gigaset/sam5943.jpg
Jun 11 20:40:19 <luka12345|wiik> yes...
Jun 11 20:44:31 <blogic> ok
Jun 11 20:44:39 <blogic> 1 board has a fucked eeprom
Jun 11 20:44:42 <blogic> the other i need to jtag
Jun 11 20:44:47 <blogic> and the patch is a total mess
Jun 11 20:45:02 <blogic> i will do this next week when i can motivate myself to do this
Jun 11 20:45:10 <blogic> currently it looks like a pile of vomit
Jun 11 20:45:34 <luka12345|wiik> on the one board you can boot openwrt
Jun 11 20:46:41 <luka12345|wiik> i have flashed on it uboot... it should be working
Jun 11 20:46:54 <luka12345|wiik> and for the vomit stuff... i know :)
Jun 11 20:47:37 <blogic> also the broken ethernet port comes from a missing solder point
Jun 11 20:47:57 <luka12345|wiik> i think that's good news :)
Jun 11 20:49:10 <luka12345|wiik> could you give me some hits how to make thing berable?
Jun 11 20:49:17 <luka12345|wiik> i mean with the patch...
Jun 11 20:49:51 <blogic> ?
Jun 11 20:50:04 <luka12345|wiik> can i fix the patch some how
Jun 11 20:50:06 <blogic> you take a solder iron and add the missing solder on the rj45 socket
Jun 11 20:50:48 <luka12345|wiik> well that is a bit hard becuese of the distance germany/croatia
Jun 11 20:51:10 <luka12345|wiik> i meant could you give me some hints to make a better patch
Jun 11 20:52:29 <luka12345|wiik> you can comment it via mail if that is easier...
Jun 11 20:53:03 <blogic> well, remove the stuff that does not work and replace it with working stuff
Jun 11 20:53:14 <blogic> basically the only correct thing is the mtd map
Jun 11 20:53:23 <luka12345|wiik> well
Jun 11 20:53:32 <luka12345|wiik> not exactly
Jun 11 20:53:38 <blogic> the ath5k should use the nor flash and not a static array
Jun 11 20:53:42 <blogic> the leds are missing
Jun 11 20:53:48 <blogic> the mac is not added
Jun 11 20:53:59 <blogic> the wdt/asc/gpio are registered in the generic code
Jun 11 20:54:08 <blogic> int he previous mail i said "use madwifi it will work"
Jun 11 20:55:20 <blogic> the tapi does not work as oyu did not register the memory resouce
Jun 11 20:55:32 <blogic> all these things can be seen in all the other mach files
Jun 11 20:55:52 <blogic> the patch changes the default ip from 192.168.1.1 to 192.168.1.50 thus breaking all comments
Jun 11 20:56:00 <blogic> ;)
Jun 11 20:56:10 <blogic> s/comments/wiki docs/
Jun 11 20:59:59 <luka12345|wiik> i'll do my best tomorrow
Jun 11 21:00:50 <blogic> i will commit a sort of clean version you can work with
Jun 11 21:01:05 <luka12345|wiik> great...
Jun 11 21:01:13 <blogic> but it will only be a core support
Jun 11 21:01:24 <luka12345|wiik> ok
Jun 11 21:07:16 <blogic> in arteep.bin, where is the mac located ?
Jun 11 21:07:41 <luka12345|wiik> i guess there is no mac in that file
Jun 11 21:07:45 <Delboy> it is not there
Jun 11 21:07:57 <luka12345|wiik> since all the routers have the same file
Jun 11 21:08:04 <Delboy> it is in bootloader nvram
Jun 11 21:09:03 <blogic> so where is that ?
Jun 11 21:09:12 <blogic> i mean which part is the nvram ?
Jun 11 21:09:28 <blogic> secondary_env ?
Jun 11 21:09:55 <blogic> boah
Jun 11 21:10:01 <blogic> that is a ascii blob
Jun 11 21:10:03 <blogic> yuck
Jun 11 21:10:24 <Delboy> yes at
Jun 11 21:10:24 <Delboy> 0xe000
Jun 11 21:10:43 <Delboy> like ethaddr=00:26:91:F9:66:28
Jun 11 21:12:02 <Delboy> but than there is a problem because than nvram is used by secondary bootloader which is modified u-boot, and it needs to have that go command to load u-boot we need
Jun 11 21:12:17 <luka12345|wiik> mac address thing
Jun 11 21:12:22 <luka12345|wiik> can you look at arch/arm/mach-orion5x/dns323-setup.c
Jun 11 21:12:39 <luka12345|wiik> dns323_read_mac_addr
Jun 11 21:13:02 <luka12345|wiik> i think that mac address could be read like that or am I wrong?
Jun 11 21:13:07 <Delboy> so if u-boot uses that nvram it will go into infinite loop, there is a problem
Jun 11 21:15:38 <blogic> you should port dns323_read_mac_addr to that mach file
Jun 11 21:16:12 <blogic> nbd: http://pastebin.com/zeAWcWeD
Jun 11 21:16:17 <blogic> where is the eeprom start ?
Jun 11 21:16:32 <blogic> 0x7a ?
Jun 11 21:36:52 <blogic> luka12345|wiik: dsl works
Jun 11 21:36:54 <blogic> ootb
Jun 11 21:37:04 <blogic> all i did was "ifup wan"
Jun 11 21:37:10 <blogic> and bingo i got an ip
Jun 11 21:38:23 <luka12345|wiik> great
Jun 11 21:38:45 <luka12345|wiik> i'll retry tomorrow
Jun 11 21:39:11 <luka12345|wiik> but when i run ifconfig
Jun 11 21:39:20 <blogic> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jun 11 21:39:21 <blogic> uhci_hcd: USB Universal Host Controller Interface driver
Jun 11 21:39:22 <blogic> ?!
Jun 11 21:39:28 <blogic> why do you load those drivers ?
Jun 11 21:41:08 <luka12345|wiik> i have enabled kmod-usb-dwc-otg, kmod-usb-ohci, kmod-usb-printer, kmod-usb-storage,  kmod-usb-uhci and kmod-usb2
Jun 11 21:41:33 <blogic> why ?
Jun 11 21:41:44 <blogic> the unit does not have uhco/ohci or ehci
Jun 11 21:41:52 <luka12345|wiik> ?
Jun 11 21:42:05 <luka12345|wiik> i did not know that
Jun 11 21:42:08 <blogic> and none of the other boards enable it, giving a clear indication that there is no uhci/ohci/ehci
Jun 11 21:42:32 <luka12345|wiik> which one should be only enabled
Jun 11 21:42:35 <luka12345|wiik> kmod-usb-dwc-otg ?
Jun 11 21:43:02 <blogic> yes
Jun 11 21:43:12 <luka12345|wiik> ok
Jun 11 21:43:17 <luka12345|wiik> i'll do that
Jun 11 21:43:21 <blogic> that is why you call xway_register_dwc
Jun 11 21:43:28 <blogic> and also why you patcehd the dwc driver
Jun 11 21:43:51 <luka12345|wiik> i never looked into uhci/ohci/ehci stuff
Jun 11 21:44:01 <luka12345|wiik> so i enabled it to be on the safe side i guess
Jun 11 21:44:38 <blogic> well
Jun 11 21:44:47 <blogic> you should look at all the other machtypes and see how they do it
Jun 11 21:44:53 <blogic> also something is weird
Jun 11 21:45:04 <blogic> this baord reaches a extremly high temperature
Jun 11 21:45:10 <blogic> i can hardly touch the soc
Jun 11 21:45:16 <blogic> it is burning my fingers
Jun 11 21:45:23 <blogic> never seen a danube get this hot
Jun 11 21:46:33 <luka12345|wiik> i dont know why... here is uptime output: 01:22:05 up  1:22, load average: 0.03, 0.03, 0.04
Jun 11 21:46:50 <luka12345|wiik> and my chip is also hot
Jun 11 21:47:28 <luka12345|wiik> where do you think may be the problem?
Jun 11 21:51:31 <blogic> no idea
Jun 11 21:51:38 <blogic> the clock is running at the right speed
Jun 11 21:52:33 <Delboy> well it gets hot like that on original fw too, and on all sx763 here
Jun 11 21:53:17 <blogic> ok
Jun 11 21:53:25 <blogic> the pcb must be simply not very good
Jun 11 21:53:58 <blogic> do oyu know the odm of this pcb ?
Jun 11 21:57:23 <luka12345|wiik> odm?
Jun 11 21:57:47 <blogic> the factory that made the pcb
Jun 11 21:58:53 <luka12345|wiik> no...
Jun 11 21:59:03 <luka12345|wiik> i could try to find out next week
Jun 11 21:59:08 <luka12345|wiik> is it important?
Jun 11 23:23:26 <builder_> build #40 of avr32 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/40
Jun 11 23:46:11 <builder_> build #35 of etrax is complete: Failure [failed compile_3]  Build details are at http://buildbot.openwrt.org:8010/builders/etrax/builds/35
Jun 12 00:30:23 <blogic> luka12345|wiik: still there ?
Jun 12 00:34:45 <blogic> luka12345|wiik: http://pastebin.com/fTY4FKeW
Jun 12 00:35:40 <blogic> nbd: thx !
Jun 12 00:40:51 <builder_> build #34 of ep93xx is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/34
Jun 12 01:55:21 <CIA-73> swalker * r27157 /packages/libs/libevent2/Makefile: [packages] libevent2: update to 2.0.12, add core, extra, openssl & pthreads packages
Jun 12 01:59:01 <swalker> #9549 & #9550, more link spam
**** ENDING LOGGING AT Sun Jun 12 02:59:56 2011