**** BEGIN LOGGING AT Sun Jun 12 02:59:56 2011
Jun 12 08:10:47 <luka12345|wiik> blogic: you got wireless working! great :)
Jun 12 08:14:39 <blogic> luka12345|wiik: yes
Jun 12 08:19:16 <luka12345|wiik> could you send me a patch
Jun 12 08:23:38 <builder_> build #37 of au1000 is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/37
Jun 12 08:26:00 <blogic> luka12345|wiik: i iwll commit it in a sec
Jun 12 08:26:07 <blogic> i also managed to get the leds working
Jun 12 08:26:16 <blogic> so dsl, leds, wifi work
Jun 12 08:26:20 <luka12345|wiik> great
Jun 12 08:26:24 <blogic> i iwll look into usb today
Jun 12 08:26:32 <luka12345|wiik> ok
Jun 12 08:26:40 <luka12345|wiik> then i'll look in voip stuff
Jun 12 08:26:44 <blogic> the usb patch is bogus
Jun 12 08:26:51 <blogic> i think pin 29 is not the usb poer poin
Jun 12 08:27:05 <blogic> also we need to find the relay ans switch reset gpio
Jun 12 08:27:42 <luka12345|wiik> Andrej looked in original source, and there he said they used pin 29 for usb
Jun 12 08:33:43 <blogic> tapi should work aswell now
Jun 12 08:33:51 <blogic> i did nto test the ports yet
Jun 12 08:34:00 <blogic> but the drivers come up and load the firmware etc etc
Jun 12 08:34:10 <blogic> so only usb is an open issue
Jun 12 08:34:41 <luka12345|wiik> how do i test the tapi? with luca's code?
Jun 12 08:38:46 <blogic> i loaded trhe driver
Jun 12 08:38:51 <blogic> did you look at the code yet ?
Jun 12 08:39:05 <blogic> i have a feeling you never looked at any of the other mach support files
Jun 12 08:39:12 <blogic> as a reference
Jun 12 08:39:14 <blogic> but ok
Jun 12 08:39:23 <blogic> try lucas code and see if it works
Jun 12 08:39:37 <blogic> but the driver loads which is already a good sign
Jun 12 08:39:50 <luka12345|wiik> i looked at the code, but i dont understand how it all works
Jun 12 08:39:52 <blogic> luca ztells me his code has a problem with cid on the first tapi channel
Jun 12 08:40:06 <blogic> so oyu should start with channel2 and not 1
Jun 12 08:40:10 <luka12345|wiik> ok
Jun 12 08:57:22 <CIA-73> blogic * r27158 /trunk/target/linux/lantiq/ (7 files in 5 dirs):
Jun 12 08:57:22 <CIA-73> [lantiq]
Jun 12 08:57:22 <CIA-73> * move patches around
Jun 12 08:57:22 <CIA-73> * add basic support for gigaset sx76x
Jun 12 08:58:20 <blogic> luka12345|wiik: also apply phrozen.org/madwifi.patch locally
Jun 12 08:58:27 <blogic> i will clean it up later and then commit it
Jun 12 08:58:41 <blogic> please work on a pathc to make the nvram mac thing work
Jun 12 08:58:45 <blogic> and test lucas voip
Jun 12 08:58:56 <blogic> i iwll do usb, missing gpio and buttons
Jun 12 08:59:00 <blogic> and then we are done
Jun 12 08:59:10 <blogic> also i made madwifi work and not ath5k for now
Jun 12 08:59:15 <blogic> i will do ath5k later on
Jun 12 08:59:27 <blogic> it needs a patch to the pci driver
Jun 12 09:02:37 <blogic> luka12345|wiik: i am going out for a few hours now
Jun 12 09:02:41 <blogic> cya later
Jun 12 09:04:06 <luka12345|wiik> ok
Jun 12 09:04:11 <luka12345|wiik> thx
Jun 12 09:14:34 <blogic> luka12345|wiik: also this is the first board i have ever seen, that uses the hardwired adsl led
Jun 12 09:14:39 <blogic> i will play around with it later
Jun 12 09:14:40 <blogic> ;)
Jun 12 09:26:13 <builder_> build #36 of iop32x is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/36
Jun 12 09:26:28 <builder_> build #51 of s3c24xx is complete: Failure [failed compile_10]  Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/51
Jun 12 09:43:22 <builder_> build #47 of ps3 is complete: Failure [failed shell_4 compile_3]  Build details are at http://buildbot.openwrt.org:8010/builders/ps3/builds/47
Jun 12 10:00:34 <builder_> build #47 of pxcab is complete: Failure [failed shell_4 compile_3]  Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/47
Jun 12 10:03:06 <^Willie^> hmm is it me or are some patches not included jet in the trunk version ?
Jun 12 10:04:54 <^Willie^> for my x86 glibc based openwrt build manual added these 2 patches. -> https://dev.openwrt.org/ticket/7133 and http://sources.redhat.com/ml/libc-alpha/2009-01/msg00036.html
Jun 12 10:06:01 <KanjiMonster> ^Willie^: might be because most use uclibc, not (e)glibc - patches are always welcome though
Jun 12 10:06:32 <^Willie^> KanjiMonster: hmm i'm building glibc based right now for testing iproute2 issues :(
Jun 12 10:07:01 <^Willie^> " ip link add link ${basedev} name ${iface} ${macaddr}type macvlan" and it get killed of the whole console locks up even ssh went death :(
Jun 12 10:08:26 <^Willie^> just looking wat kind of issues i'll bump into using glibc and hope iproute won't lockup due some other reason..
Jun 12 10:08:52 <^Willie^> macvlan support is more then anything in this setup.. no macvlan no router :(
Jun 12 10:09:58 <^Willie^> *argh* private life calls again .. phones are a lot easyer they can be switched off when we like..
Jun 12 10:10:09 <^Willie^> brb
Jun 12 10:15:15 <^Willie^> KanjiMonster: iirc mosth issues are easy to fix by finding ready made patches in the mailing lists..
Jun 12 10:22:09 <KanjiMonster> ^Willie^: patches still need to be verified (unless you really trust the poster), and since (e)glibc isn't the main libc, it doesn't get that much love
Jun 12 10:23:12 <^Willie^> ahh toolchain builds fine now.. (glibc-2.6.1/gcc-linaro-4.5-2011.05-0)
Jun 12 10:23:33 <^Willie^> i do understand that.. will be better that i get iproute2 fixed on uclib based setups.
Jun 12 10:25:59 <^Willie^> also i did not seek verry deep in the uclib parts try creating a macvlan device using iproute2 utils resuled in some kind of endless loop somewhere.. or ip command gets killed or my whole vm freeze :(
Jun 12 10:26:23 <KanjiMonster> btw, you should get a serial connection; makes testing things much easier (epecially with networking stuff where you can easily lock yourself out of the device)
Jun 12 10:26:39 <^Willie^> my vbox screen locks :)
Jun 12 10:26:40 <KanjiMonster> ah, you are using a vm
Jun 12 10:26:49 <^Willie^> thats regulair framebuffer tty
Jun 12 10:27:03 <^Willie^> jup debug before load it to my router..
Jun 12 10:27:27 <^Willie^> router is using flash storage so i do not wanna rewrite the flash tomutch..
Jun 12 10:29:03 <^Willie^> hmm i wonder if some cafetaria are interested using a openwrt box with freifunk as wifi hotspot..
Jun 12 10:29:45 <^Willie^> docsis cable connections here 40/4 +- 40 eur .. including phone and cable tv.. 3g/umts links are still paid by kilobyte :(
Jun 12 10:34:40 <^Willie^> KanjiMonster: i'll post the build results including 3 patches i used.. 2 from existing openwrt tickets and 1 for glibc for trunk 27156
Jun 12 11:38:54 <KanjiMonster> [florian]: cshore isn't freeswitch's maintainer anymore, it's mazilo now
Jun 12 11:41:38 <[florian]> ok, thanks for telling me
Jun 12 11:43:06 <_trine> I didnt know it was mazilo has he agreed to that
Jun 12 11:43:44 <_trine> cshore, cant do it anymore he says because he is being paid by a competitor
Jun 12 11:44:18 <KanjiMonster> _trine: well, there were already several commits by mazilo, and also the makefile lists him as the maintainer -> https://dev.openwrt.org/browser/packages/net/freeswitch/Makefile#L146 ;)
Jun 12 11:44:32 <_trine> interesting
Jun 12 11:48:21 <KanjiMonster> hm, he doesn't seem to have a trac account, at least I can't find him in the list of assignable people (on a (un-)releated note it seems you can't reassign tickets to "developers" back or filter tickets owned by "developers")
Jun 12 11:48:43 <_trine> openwrt should have an initiation ceremony for maintainers where they have to bear their left breast, right trousers leg rolled up with a noose round their necks while they swear allegiance to openwrt on pain of having their tongue cut and being hung dead from London bridge if they defect to the other side
Jun 12 11:50:28 <blogic> _trine: that is crap
Jun 12 11:50:41 <_trine> heh
Jun 12 11:50:56 <_trine> I take you cant share a word then ?
Jun 12 11:51:01 <blogic> there is no such thing and it should not be stereotyped
Jun 12 11:51:53 <_trine> blogic, you appear not to be already initiated in the ways of freemasonry :P
Jun 12 11:52:12 <blogic> ?
Jun 12 11:52:22 <blogic> are you high ?
Jun 12 11:52:51 <_trine> blogic, its a play on words that appears to be beyond your learnings
Jun 12 11:52:56 <_trine> a joke
Jun 12 12:06:20 <_trine> When all else fails, blame the Freemasons and the Jews. :)
Jun 12 12:15:47 <KanjiMonster> _trine: I'd rather blame the Illuminati or just "Them"
Jun 12 12:16:11 <_trine> heh
Jun 12 12:16:24 <_trine> and dont forget the lizards
Jun 12 12:19:02 <^Willie^> can i also blame them for my powerball is flying away again ;)
Jun 12 12:19:52 <_trine> hey I am confused now,,  only the English are supposed to have a sense of humour
Jun 12 12:20:26 <_trine> all you foreigners stealing our only claim to fame :P
Jun 12 12:20:42 <^Willie^> hmm ever seen a nsd powerball at 15K rpm going free in air :)
Jun 12 12:20:49 <^Willie^> lolz
Jun 12 12:21:43 <_trine> we'll have jow_laptop next telling a joke
Jun 12 12:21:59 <_trine> sacrilege
Jun 12 12:22:25 <^Willie^> hmm i go downtown for a moment.. return my usb hub.. bought one yesterday and the damn thing was broken :S
Jun 12 12:22:36 <^Willie^> and a fresh cup of coffee will be nice..
Jun 12 12:23:14 <_trine> jow where are you I want to ask you a question
Jun 12 12:25:28 <KanjiMonster> _trine: we germans exported "schadenfreude" to many countries, we couldn't have done this without any sense of humour ;)
Jun 12 12:25:38 <_trine> hehe
Jun 12 12:29:18 <_trine> schadenfreude: "Rejoice not when thine enemy falleth, and let not thine heart be glad when he stumbleth: Lest the LORD see it, and it displease him,
Jun 12 12:29:55 <_trine> its in the Bible
Jun 12 12:30:05 <swalker> updated openwrt/upstream, https://home.comcast.net/~sdwalker/uscan/index.html
Jun 12 13:10:07 <^Willie^> KanjiMonster: build finished a while ago without errors :) will test the vbox image tonight afther diner time..
Jun 12 13:10:28 <^Willie^> also uclib based is a lot faster builded..
Jun 12 13:11:27 <^Willie^> other question how to fillup 8G flash storage for this x86 build ;-p
Jun 12 13:41:57 <builder_> build #41 of sibyte is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/41
Jun 12 13:55:35 <builder_> build #47 of orion is complete: Failure [failed compile_7]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/47
Jun 12 14:08:04 <CIA-73> nbd * r27159 /trunk/package/ppp/Makefile: ppp: remove -ffunction-sections, -fdata-sections and -Wl,--gc-sections, it can cause functions needed by plugins to disappear (fixes #9462)
Jun 12 16:48:19 <builder_> build #48 of cobalt is complete: Failure [failed shell_4]  Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/48
Jun 12 18:48:20 <philipp64|laptop> any committers around?
Jun 12 18:50:01 <philipp64|laptop> KanjiMonster: ping
Jun 12 18:50:10 <KanjiMonster> philipp64|laptop: pong
Jun 12 18:50:26 <KanjiMonster> no, I'm still not a commiter
Jun 12 18:50:30 <KanjiMonster> ;)
Jun 12 18:50:57 <philipp64|laptop> damn it... can't keep whose handle goes with which name. so what's Jonas' handle?
Jun 12 18:51:11 <KanjiMonster> it's mine ;p
Jun 12 18:51:24 <philipp64|laptop> (maybe someone should put them up on the patchwork wiki)
Jun 12 18:51:44 <philipp64|laptop> all those patches, and they still won't make you a committer? that's just silly.
Jun 12 18:52:44 <nbd> developers have already agreed to make him a committer, he just hasn't received his access yet
Jun 12 18:53:25 <philipp64|laptop> ah... good to know. Felix, can you please have a look at patches 1060 and 1078?
Jun 12 18:54:09 <philipp64|laptop> Jonas, you've been a busy boy...
Jun 12 18:58:09 <philipp64|laptop> can someone add the IRC handles to the table on http://patchwork.midlink.org/project/openwrt/ ?
Jun 12 18:59:14 <KanjiMonster> philipp64|laptop: there's already https://dev.openwrt.org/wiki/people
Jun 12 19:00:38 <CIA-73> jow * r27160 /trunk/package/6to4/ (Makefile files/6to4.sh): [package] 6to4: don't start if detected local IPv4 address is RFC1918, allows people to deploy firmwares with 6to4 enabled by default
Jun 12 19:02:05 <CIA-73> jow * r27161 /branches/backfire/package/6to4/ (Makefile files/6to4.sh): [backfire] merge r27160
Jun 12 19:03:05 <philipp64|laptop> I see a few names missing... mine, OutBackDingo, ermo, mb, RealOpty...
Jun 12 19:18:54 <CIA-73> florian * r27162 /trunk/target/linux/adm5120/ (42 files in 14 dirs): [adm5120] cleanup files using checkpatch.pl
Jun 12 19:21:23 <got_milk> hey everyone, I'm reporting a build error in latest trunk -> http://pastebin.com/fwWYWGLj
Jun 12 19:23:00 <xMff> got_milk: unclean tree
Jun 12 19:28:19 <CIA-73> jow * r27163 /trunk/package/6to4/ (Makefile files/6to4.sh): [package] 6to4: advertise effective tunnel mtu in RAs
Jun 12 19:32:27 <CIA-73> jow * r27164 /branches/backfire/package/6to4/ (Makefile files/6to4.sh): [backfire] merge r27163
Jun 12 20:13:31 <philipp64|laptop> I'm wondering if there's any value in the committers posting their own patches for review first before committing them? more eyes on the problem they're trying to solve...
Jun 12 20:14:50 <philipp64|laptop> I just saw some minor changes to r27160 that might have benefited from review before commit...
Jun 12 20:15:19 <xMff> ?
Jun 12 20:15:33 <philipp64|laptop> see the mailing list.
Jun 12 20:15:56 <philipp64|laptop> you could have just used: local IFS="." ; set -- $1
Jun 12 20:16:23 <xMff> ok
Jun 12 20:16:25 <xMff> bbl
Jun 12 20:16:26 <philipp64|laptop> the whole point of "local" is you don't need to save and restore stuff... it does it for you.
Jun 12 20:29:20 <^Willie^> hmm i do endup with double lib dir locations :( build the svn trunk (x86 glibc) and have /lib and /usr/lib is there some way to make it symlink usr/lib/* to /lib ?
Jun 12 20:54:27 <builder_> build #46 of ppc40x is complete: Failure [failed compile_6]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/46
Jun 12 21:01:57 <philipp64|laptop> ^Willie^: I'm not sure I follow...
Jun 12 21:03:49 <^Willie^> hmm will take a look at the default uc basd builds and try to find out wat belongs where :S
Jun 12 21:07:28 <philipp64|laptop> I gave up on building eglibc a while ago because it's regularly broken for months at a time. sigh. it should be part of the robo-build target list, but it's not.
Jun 12 21:08:16 <nbd> philipp64|laptop: if it's broken, please report (or preferably fix) the bugs
Jun 12 21:08:37 <^Willie^> philipp64|laptop: ehh i used glibc 2.6.1 not Eglibc
Jun 12 21:08:39 <nbd> if you need help with that, let me know
Jun 12 21:09:20 <^Willie^> philipp64|laptop: also for me it works afther adding 3 patches 2 are known still need to create a ticket..
Jun 12 21:10:27 <^Willie^> nbd: hmm i'll rerun my uclibc build again and make it write some log to disk instaid of running in ramdisk so that i can look why the whole system/console lockup when try creating a vlan device with mac adres
Jun 12 21:10:50 <^Willie^> but in this glibc based build that part just works.
Jun 12 21:51:30 <philipp64|laptop> nbd: I put CONFIG_USE_EGLIBC=y in my defconfig, but that doesn't seem to be enough... what's the gating variable?
Jun 12 21:52:47 <nbd> you need to enable advanced toolchain options as well
Jun 12 22:01:07 <philipp64|laptop> nbd: I already had CONFIG_DEVEL=y ...
Jun 12 22:04:24 * russell-- thinks he's figured out part of the problem with RB493G and not getting a carrier/link on eth0 ... thinks it's because the config code is locking it to GigE and i'm plugged into a 100Mbps switch
Jun 12 22:06:21 <philipp64|laptop> nbd: ah, you need TOOLCHAINOPTS=y
Jun 12 22:12:51 <KanjiMonster> russell--: heh, I did this on my first ar8316 driver attempt, and didn't notice it because eth0 was always plugged into my ge card ;)
Jun 12 22:16:10 <builder_> build #47 of lantiq is complete: Failure [failed compile_6]  Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/47
Jun 12 22:24:36 <philipp64|laptop> nbd: building Geos with Eglibc fail... http://fpaste.org/KqBY/
Jun 12 22:29:41 <philipp64|laptop> nbd: amended. can we commit?
Jun 12 22:29:55 <nbd> currently working on other stuff
Jun 12 22:30:04 <philipp64|laptop> and who owns the 2.6.39 stuff?
Jun 12 22:30:35 <nbd> nobody owns a particular kernel version
Jun 12 22:31:34 <philipp64|laptop> well, someone added the config-2.6.39 file but left out a symbol...  I sent a one-line patch pointing this out over a week ago and haven't heard back.
Jun 12 22:32:11 <philipp64|laptop> actually, you did...r26615
Jun 12 22:32:45 <philipp64|laptop> looks like hauke and florian added some missing symbols as well.
Jun 12 22:33:34 <philipp64|laptop> I know that OpenWrt users don't particularly favor the x86 platform, BUT... building x86 targets does seem to exercise a fair amount of kernel code...
Jun 12 22:33:48 <philipp64|laptop> perhaps we should build more x86 targets on the robo-builders?
Jun 12 22:34:08 <nbd> you could talk to thepeople about that
Jun 12 22:35:51 <philipp64|laptop> yeah, I did. I even volunteered cycles on my 4-core machine for additional builds...
Jun 12 22:36:11 <philipp64|laptop> he was busy but said he'd get back to me. that was a month ago.
Jun 12 22:36:20 <philipp64|laptop> maybe I should ping him.
Jun 12 22:36:45 <^Willie^> philipp64|laptop: hmm how long do it take to build "all" packages ?
Jun 12 22:37:20 <^Willie^> before i put my desktop at work for atleast a day or so :p
Jun 12 22:38:12 <philipp64|laptop> never tried. is there a target that does that?
Jun 12 22:38:28 <philipp64|laptop> or can someone ship me a canned .config?
Jun 12 22:38:51 <philipp64|laptop> thepeople: ping
Jun 12 22:42:56 <^Willie^> nope there is a switch that can be set in the menuconfig
Jun 12 22:43:20 <philipp64|laptop> you going to make me look for it? :-)
Jun 12 22:43:31 <^Willie^> i guess it will build all and put them in the packages directory
Jun 12 22:44:17 <^Willie^> since i use a custom build here.. not a bad idea building everything and put it with the images and packages on a local httpd
Jun 12 22:44:33 <^Willie^> but i'm using x86 build.. not arm/mips
Jun 12 22:44:42 <^Willie^> using a*
Jun 12 23:35:24 <philipp64|laptop> nbd: just posted an urgent fix for eglibc, but it's still broken. investigating further.
Jun 12 23:47:31 <philipp64|laptop> nbd: seeing other eglibc breakage... http://fpaste.org/MyOY/
Jun 13 00:02:02 <philipp64|laptop> is there a reason eglibc defaults to 2.8????
Jun 13 00:18:51 * russell-- can do all-packages build on a quad-core i7 in about 8 hours iirc
Jun 13 01:49:25 <OutBackDingo> philipp64|laptop: huh?
Jun 13 01:49:43 <philipp64|laptop> huh what?
Jun 13 01:49:58 <OutBackDingo> missing names?
Jun 13 02:03:47 <philipp64|laptop> oh, right. from the who's who list of OpenWrt people on the patchwork site.
Jun 13 02:05:08 <builder_> build #39 of kirkwood is complete: Failure [failed compile_6]  Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/39
Jun 13 02:52:44 <OutBackDingo> philipp64|laptop: theres actually a patchwork site?
Jun 13 02:54:14 <OutBackDingo> you mean the project info page?
**** ENDING LOGGING AT Mon Jun 13 02:59:57 2011