**** BEGIN LOGGING AT Mon Jun 20 02:59:57 2011 Jun 20 03:02:05 mirko: eglibc is still broken. I sent a patch for the makefile issue a few days ago. didn't hear back. Jun 20 03:04:28 the fix is in http://patchwork.midlink.org/patch/1114/ (well, one of them... it's got several bits of brokenness...) Jun 20 03:43:31 glibc seems to be more or less working now Jun 20 03:43:41 although not all in SVN yet Jun 20 03:47:47 I'm unable to build eglibc-2.12. Jun 20 03:47:54 so I see Jun 20 03:47:58 use glibc :o Jun 20 04:12:28 well, I wish someone with commit rights would notice. been calling the problems out for months. Jun 20 04:12:51 it's def. been worked on, and there have been commits for it Jun 20 04:19:50 yeah, but they always seem to overlook the problems I point out. Jun 20 04:20:00 talk to mirko Jun 20 04:20:01 and the fixes I sent in also got overlooked. Jun 20 04:20:06 been trying. Jun 20 04:20:06 poke him harder Jun 20 04:20:12 cry some more Jun 20 04:20:20 I'll sharpen my poking stick. Jun 20 08:46:59 philipp64|laptop: i don't have any issues building and using eglibc 2.12 - can you elaborate your problems?` Jun 20 09:42:58 jow * r27242 /trunk/package/kernel/modules/netdevices.mk: (log message trimmed) Jun 20 09:42:58 [package] kernel: package more NIC drivers: Jun 20 09:42:58 * SiS 190 Fast/Gigabit Ethernet support Jun 20 09:42:58 * SysKonnect Yukon support Jun 20 09:42:58 * Atheros L2 Fast Ethernet support Jun 20 09:42:59 * Atheros L1 Gigabit Ethernet support Jun 20 09:42:59 * Atheros L1C Jun 20 10:06:48 florian * r27243 /trunk/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c: [adm5120] fix usb mis-cleanup after r27162 (#9581) Jun 20 10:37:14 <_trine> larsc, ping Jun 20 10:37:23 <_trine> 1933c1933 Jun 20 10:37:23 <_trine> < # CONFIG_CRYPTO_DEV_MV_CESA is not set--- Jun 20 10:37:23 <_trine> > CONFIG_CRYPTO_DEV_MV_CESA=m Jun 20 10:42:57 jow * r27244 /trunk/scripts/config/ (.gitignore lxdialog/.gitignore): Jun 20 10:42:57 [PATCH] scripts/config/.gitignore omits source files Jun 20 10:42:57 scripts/config/.gitignore aims to avoid checking binaries in to git. Jun 20 10:42:57 Unfortunately it also omits conf.c, confdata.c, and all source files Jun 20 10:42:57 in lxdialog. An OpenWRT tree pulled from a git repository will not Jun 20 10:42:57 build, and I suspect this was not the intention. Jun 20 10:42:58 Signed-off-by: Denton Gentry Jun 20 10:50:24 <_trine> larsc, FYI mv_cesa and crypto_hash etc have now compiled ok Jun 20 11:14:41 mirko * r27245 /trunk/toolchain/eglibc/Makefile: (log message trimmed) Jun 20 11:14:41 Revert "[toolchain/eglibc} eglibc in fact can be built with -Os" Jun 20 11:14:41 Compiling with -Os results in: "error: #error "glibc cannot be compiled without optimization" Jun 20 11:14:41 Still, building with -Os is listed as feature in Jun 20 11:14:41 : Jun 20 11:14:41 "" Jun 20 11:14:41 Building with -Os Jun 20 11:44:20 Hello, I have an unbraded rt305x board Jun 20 11:44:30 the flash disk is being detected Jun 20 11:44:39 but parse_mtd_partitions is failing and hence Jun 20 11:45:05 physmap is falling back to wrong defaults Jun 20 11:45:11 howto solve Jun 20 12:00:06 _trine: so everything works fine now, without changing anything? Jun 20 12:48:52 <^Willie^> xMff: adding a few extra collectd modules to luci-stats is not that easy as it looks like :S Jun 20 12:49:17 <^Willie^> do have the missing modules in the config pages but the enable checkbox that really is defined is not shown :S Jun 20 12:50:15 <^Willie^> other way around the issue i have been thinking about is finding a way adding perl based rrdtool in openwrt and use collectd-web Jun 20 12:51:31 <^Willie^> not shure if just edit the makefile for rrdtool will do the trick Jun 20 13:28:30 <_trine> larsc, well I would not say changing anything because something must have changed as it compiles now and it would not before Jun 20 13:28:57 <_trine> I have even done an svn up afterwards and it still compiles Jun 20 13:30:37 <_trine> the only difference I could imagine is that I let crypto_hash compile without choosing mv_cesa Jun 20 13:30:47 KanjiMonster: Are you around?:) Jun 20 13:30:57 <_trine> and after that even when I selected mv_cesa it all compiled Jun 20 13:31:17 <_trine> so that must be what has changed Jun 20 13:31:36 gzanan: partially Jun 20 13:31:46 KanjiMonster: I've build a 2.6.39 with ipv6 6to4 support and test for several hours. Jun 20 13:32:15 <_trine> for all you guys in stuffy offices at work I just want to let you know I have just poured a nice cold can of beer :) Jun 20 13:32:31 gzanan: and the test result is? ;) Jun 20 13:32:58 KanjiMonster: Found that it works fine from beginning,But after 3 or 4 hours I can't open ipv6 sites. Jun 20 13:34:28 KanjiMonster: I have to reconnect pppoe and 6to4 to get it works again. Jun 20 13:34:45 gzanan: sounds more like a 6to4 problem to me Jun 20 13:34:58 <^Willie^> _trine: hmm beer sounds like a good idea for the monday @ 15:30 :) Jun 20 13:35:32 gzanan: did you test whether it works or the same happens with 2.6.37 or earlier? Jun 20 13:36:15 <_trine> ^Willie^, 14:35 actually Jun 20 13:36:16 Haven't test that yet Jun 20 13:37:23 <^Willie^> hmm brb need to go outside for a moment :s this is nogood Jun 20 13:37:41 <_trine> Just watching TV looks like Germany could hold a raffle for Greece :P Jun 20 13:37:58 <^Willie^> raffle for greece ? Jun 20 13:38:18 <_trine> do you know what a raffle is Jun 20 13:38:29 <^Willie^> hmm google tells me a lottery Jun 20 13:38:30 <_trine> you buy tickets to win it Jun 20 13:39:24 <_trine> I'm hoping all good Germans keep paying their taxes so they can send their money to Greece Jun 20 13:40:01 <^Willie^> hmm the greece question i dunno as dutch guy .. we have been true all that crap in the past and now we are feeling like going to pay it again and again and over again.. in the same time the country's that do get help do also pay the bill 2 times and where is that 4 times money going to in the end.. looks like going up in vapor Jun 20 13:40:58 <^Willie^> personal i think the europian gov and greece there own gov failed and let the little people pay for the big guys that walk away without any blame or watever.. Jun 20 13:41:41 KanjiMonster: I use transmission for PT seeding 300 torrents.Does it affect the ipv6 connection? Jun 20 13:42:00 <_trine> I think xMff and KanjiMonster should work harder to pay more taxes Jun 20 13:42:24 * _trine giggles Jun 20 13:42:52 <^Willie^> _trine: where are you from if i may ask ? Jun 20 13:43:02 <_trine> UK Jun 20 13:43:14 <^Willie^> ahh the neighbours where my father came from :) Jun 20 13:43:36 <_trine> we're paying too but not quite as much Jun 20 13:43:44 <^Willie^> i know Jun 20 13:44:02 <^Willie^> everybody is paying.. that make me wonder where is all that money going to.. Jun 20 13:44:21 <^Willie^> since the wallets are atleast 50% more leightweight then before. Jun 20 13:44:38 <_trine> to big fat Greeks and it should be going to big fat geeks Jun 20 13:45:07 <_trine> someone made a spelling mistake when it was all decided Jun 20 13:45:47 <^Willie^> _trine: hmm i dunno.. greece is a nice reason for the europian gov to whaste more money if you ask me and the people will rant about greece while it is our own gov that ask us the same amount as the ask from greece so it is a win win in the end if they pay or not. Jun 20 13:46:13 <^Willie^> it can't be easyer :S Jun 20 13:46:24 <^Willie^> sadly not mutch people do see this happening Jun 20 13:47:00 <_trine> ^Willie^, my comments are a bit tongue in cheek just to liven the afternoon up a bit Jun 20 13:47:30 <^Willie^> _trine: hmm ok i can't :p Jun 20 13:47:53 <^Willie^> anyway i go continue my smoke.. not here for being a troll ;) Jun 20 13:47:57 <_trine> KanjiMonster, and xMff didnt bite :P Jun 20 13:48:02 <_trine> heh Jun 20 13:48:23 <^Willie^> _trine: but squatting has been banned since then seeking for a home.. but thats holland you know :( Jun 20 13:48:53 * ^Willie^ wanna go back 15 years to the old system.. Jun 20 13:49:03 gzanan: yes (even more if transmission is ipv6 capable and there are ipv6 peers) Jun 20 13:50:17 _trine: sorry, I'm currently at work and therefore only check when I have a free minute ;) Jun 20 13:50:46 <_trine> I was having a bit of fun Jun 20 13:52:24 But I can open ipv4 sites while ipv6 not. Jun 20 13:53:36 I use ipv6 to bypass GFW. You see China GFW sucks. Jun 20 13:55:02 <^Willie^> hmm building take a lot longer using the premake .configs from http://downloads.openwrt.org/snapshots/backfire/10.03.1-RC5-testing/x86/generic/config Jun 20 13:55:15 <^Willie^> also result in more packages i can install later i hope .. Jun 20 13:55:47 yeah the default config builds ALL packages Jun 20 13:56:26 <^Willie^> indeed and notice a lot 404's :) Jun 20 13:56:50 <^Willie^> --2011-06-20 15:37:56-- http://mirror2.openwrt.org/sources/flashrom-0.9.3.tar.bz2 -> HTTP request sent, awaiting response... 404 Not Found Jun 20 13:57:15 <^Willie^> mosth of those are deps i do not need for a full scale x86 desktop machine anyway Jun 20 13:57:27 this is normal Jun 20 13:57:39 download.pl *always* asks openwrt mirrors for sources first Jun 20 13:57:43 <^Willie^> i know it is testing release :) Jun 20 13:58:41 <^Willie^> iirc take some time tonight looking at luci-statistics stuff and collectd modules.. do have the missing modules in luci but not working jet. Jun 20 13:59:21 <^Willie^> then there is one really simple task left.. config syslog-ng and migrate current iptables config to the openwrt box. Jun 20 14:00:01 <^Willie^> also learned a lot with openwrt in vbox ;) Jun 20 14:03:38 <^Willie^> i think for luci and collectd a patch will do.. Jun 20 14:29:45 mirko: I've been posting fpastes and emails with the exact errors I'm seeing. Jun 20 14:30:22 "cc1: note: someone does not honour COPTS correctly, passed 0 times" Jun 20 14:30:31 so the openwrt cflags are not passed to the libc build correctly Jun 20 14:30:36 and that's what's causing the compile error Jun 20 14:36:39 nbd: that one I called out weeks ago... no one responded so I figured it wasn't important. Jun 20 14:38:06 nbd: can someone please commit the eglibc Makefile fix for the mixed static+implicit rules? otherwise it won't build with make 3.82. Jun 20 14:42:24 bueller? bueller? ... bueller? Jun 20 15:06:49 philipp64|laptop: do you mean müller the yoghurt company ? Jun 20 15:15:07 moo Jun 20 15:15:28 blogic: no, ferris bueller. Jun 20 15:16:50 blogic: http://www.youtube.com/watch?v=NP0mQeLWCCo Jun 20 15:17:33 that's what it's like trying to get a fix committed. :-( Jun 20 15:48:30 philipp64|laptop: sure Jun 20 16:17:58 blogic: sorry, in response to what? Jun 20 19:10:31 can anyone here help with setting up a bdi2000 for debugging a wndr3700 (32-bit mips) it is currently loaded for an ARM9 core Jun 20 19:15:54 sbak: you first need to load the MIPS firmware on your bdi Jun 20 19:21:36 nbd: right! where can i get that firmware? All i see on the website is various cfg files? Jun 20 19:24:58 I e-mailed support@abatron.ch and am awaiting a response. Does abatron charge for firmware for different CPUs? Jun 20 19:26:29 I downloaded and built bdisetup, I suppose I should beable to run the following command: ./bdisetup -u -p/dev/ttyS0 -b57 -aGDB -tMIPS Jun 20 19:27:11 However that command gives me "Connecting to BDI loader failed (-1001)" Jun 20 19:27:44 I have tried all of the different baudrates as well as ttyS0-3 it should be ttyS0 though. Jun 20 19:33:14 nbd: I just got my hands on a bdi3000, same questions apply though as this is configured for ARM as well. any help would be greatly appreciated Jun 20 19:52:52 sbak: yes, they charge for different firmware Jun 20 19:53:13 it's possible to upgrade the firmware without bdisetup Jun 20 19:53:15 using tftp Jun 20 20:02:55 Thanks. I got a USB-serial converter and was able to talk over the serial port on /dev/ttyUSB0. We havn't worked with any MIPS processors here so I am unable to get ahold of that firmware :( Jun 20 22:14:04 hi Jun 20 22:14:10 does someone of you write c++? Jun 20 22:14:14 when i create a structure and do a structname foo* = new structname ; and delete foo afterwards i get a segmentation fault when i create it with structname foo* = new structname() - the delete works - why? Jun 20 22:15:45 ahh it seems it was old code therefor the crash - now both version work .. Jun 21 01:52:28 tripolar: why would you want to explicitly invoke the copy constructor? **** ENDING LOGGING AT Tue Jun 21 02:59:56 2011