**** BEGIN LOGGING AT Mon Apr 16 02:59:59 2012
Apr 16 07:29:17 <builder> build #164 of at91 is complete: Failure [failed compile_10]  Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/164
Apr 16 07:45:24 <CaneToad> does anybody know if this patch has been incorporated into any bleeding edge builds?  http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg12517.html
Apr 16 07:46:05 <CaneToad> https://dev.openwrt.org/changeset/30645
Apr 16 07:59:21 <KanjiMonster> CaneToad: only ramips-rt288x is currently build for snapshots, so no (you have to build ramips-rt305x yourself)
Apr 16 07:59:46 <CaneToad> KanjiMonster: ok thanks
Apr 16 08:00:42 <builder> build #152 of ramips is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/152
Apr 16 08:37:25 <builder> build #119 of rdc is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/rdc/builds/119
Apr 16 09:11:34 <CIA-54> mirko * r31300 /trunk/toolchain/eglibc/Config.in:
Apr 16 09:11:34 <CIA-54> [toolchain/eglibc] level up eglibc versions to latest revisions of its respective branches
Apr 16 09:11:34 <CIA-54> in particular this solves the issue that eglibc version 2.x produced so-files having the version string 2.(x-1) in its names which confused the toolchain
Apr 16 09:25:55 <builder> build #166 of s3c24xx is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/166
Apr 16 09:50:12 <CaneToad> when using "make menuconfig", what's minimum set of 802.1x support required for typical insecure/secure 802.11b/g/n?  Is "wpad" wpa supplicant required?
Apr 16 10:10:21 <builder> build #152 of pxcab is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/152
Apr 16 10:46:36 <builder> build #142 of uml is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/142
Apr 16 10:56:54 <builder> build #136 of avr32 is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/136
Apr 16 11:06:01 <builder> build #143 of x86 is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/143
Apr 16 11:21:17 <builder> build #133 of kirkwood is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/133
Apr 16 11:43:51 <builder> build #134 of ar71xx is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/134
Apr 16 12:09:21 <CIA-54> florian * r31301 /trunk/target/linux/generic/config-2.6.32: [kernel/2.6.32] add missing debugging symbols
Apr 16 12:09:23 <CIA-54> florian * r31302 /trunk/target/linux/rdc/config-2.6.32: [rdc] add missing debugging symbols
Apr 16 12:09:30 <CIA-54> florian * r31303 /trunk/package/sierra-directip/Makefile: [package] sierra-directip: disable build with kernels older than 2.6.32 included
Apr 16 12:15:04 <CIA-54> acinonyx * r31304 /packages/libs/libconfig/Makefile:
Apr 16 12:15:04 <CIA-54> [packages] libconfig: install pkgconfig data in staging dir
Apr 16 12:15:04 <CIA-54> And while at it, include all symlinks for the library file in the package.
Apr 16 12:15:04 <CIA-54> Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Apr 16 12:15:04 <CIA-54> Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
Apr 16 12:40:00 <CIA-54> florian * r31305 /trunk/target/linux/generic/patches-2.6.32/034-eeprom_93cx6_backport.patch: [kernel/2.6.32] backport a missing eeprom 93cx6 define for building rt2x00
Apr 16 12:40:03 <CIA-54> florian * r31306 /trunk/target/linux/generic/patches-2.6.32/035-gpio_keys_backport.patch: [kernel/2.6.32] backport missing platform data members for gpio-keys
Apr 16 13:02:37 <CIA-54> blogic * r31307 /trunk/target/linux/lantiq/ (107 files in 10 dirs): [lantiq] adds 3.3 patches and files
Apr 16 13:06:04 <CIA-54> acinonyx * r31308 /packages/utils/collectd/ (4 files in 2 dirs): [pacakges] collectd: Update to v4.10.7
Apr 16 15:18:16 <CIA-54> jow * r31309 /packages/net/openconnect/Makefile:
Apr 16 15:18:16 <CIA-54> package: Upgrade openconnect to 3.16
Apr 16 15:18:16 <CIA-54> Some performance improvements here (memcpy elimination) which will be
Apr 16 15:18:16 <CIA-54> useful on low-power boxes. And some memory leak fixes too.
Apr 16 15:18:16 <CIA-54> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Apr 16 15:18:20 <CIA-54> jow * r31310 /packages/utils/klish/ (. Makefile): (log message trimmed)
Apr 16 15:18:20 <CIA-54> add klish package
Apr 16 15:18:20 <CIA-54> The klish is a framework for implementing a CISCO-like CLI on a UNIX
Apr 16 15:18:20 <CIA-54> systems. It is configurable by XML files. The KLISH stands for Kommand
Apr 16 15:18:21 <CIA-54> Line Interface Shell.
Apr 16 15:18:21 <CIA-54> klish is an active fork of the clish program created by Graeme
Apr 16 15:18:22 <CIA-54> McKerrell.
Apr 16 15:18:30 <danmackay> oh look, stuff being done
Apr 16 15:19:37 <jow_laptop> ping dwmw2
Apr 16 15:19:37 <[florian]> ah ah, funny
Apr 16 15:19:50 <dwmw2> jow_laptop: hi
Apr 16 15:20:31 <jow_laptop> hi. I've been looking at your v2 patch series and seen a few issues with it
Apr 16 15:20:44 <dwmw2> ok
Apr 16 15:20:55 <jow_laptop> I wonder where 1/4 did go?
Apr 16 15:21:02 <dwmw2> I didn't resend 1/4
Apr 16 15:21:20 <dwmw2> and it was the teql thing. I think we're waiting for netifd to replace all our network configuration?
Apr 16 15:21:31 <jow_laptop> ok. I cannot apply 4/4 because usually we upgrade the kernel versions for all targets at once
Apr 16 15:21:40 <jow_laptop> that was the other issue
Apr 16 15:21:45 <dwmw2> um, ok. But Geos already isn't the same as all the others.
Apr 16 15:22:00 <dwmw2> if I remove the existing version from its target.mk, I get something ancient like 2.6.39?
Apr 16 15:22:00 <jow_laptop> which led to the question whether 2/4 and 3/4 apply cleanly against 3.3.1
Apr 16 15:22:28 <dwmw2> yeah, I've tested against 3.3, 3.3.1 and 3.3.2
Apr 16 15:22:30 <jow_laptop> dwmw2: I mean if we go from 3.3.1 to 3.3.2 we upgrade all current users of 3.3.1 at once
Apr 16 15:22:34 <dwmw2> oic
Apr 16 15:22:56 <jow_laptop> to avoid having too many kernel versions
Apr 16 15:23:00 <dwmw2> makes sense. At least you have fewer ... right.
Apr 16 15:23:47 <dwmw2> So you can apply v1 of patch 4/4? To upgrade to 3.3.1 ?
Apr 16 15:23:59 <jow_laptop> yes
Apr 16 15:24:02 <dwmw2> cool
Apr 16 15:26:41 <jow_laptop> hm, from looking at it, no other board is on 3.3.x at all yet, so it doesn't matter whether we jump to 3.3.1 or 3.3.2
Apr 16 15:26:49 <jow_laptop> so nvm about 4/4
Apr 16 15:27:58 <dwmw2> *someone* had addded 3.3.1 to the md5sums
Apr 16 15:28:23 <dwmw2> 57a6b42c (jogo            2012-04-09 14:48:56 +0000 41) ifeq ($(LINUX_VERSION),3.3.1)
Apr 16 15:29:14 <blogic> jow_laptop: am waiting on test reports for 3.3 series
Apr 16 15:29:50 <jow_laptop> blogic: pppoa or generally?
Apr 16 15:29:58 <blogic> general
Apr 16 15:30:02 <jow_laptop> ok
Apr 16 15:30:10 <blogic> i can go straight to 3.2
Apr 16 15:30:17 <blogic> i can go straight to 3.3.2
Apr 16 15:30:32 <blogic> dont mind really
Apr 16 15:31:42 <jow_laptop> ok
Apr 16 15:32:32 <jow_laptop> dwmw2: in any case we will only keep one 3.3.x version, so I'll deal with the 3.3.2 bump seperately to see if the other generic patches need refreshes
Apr 16 15:32:53 <dwmw2> blogic: fwiw I'm perfectly happy with 3.3.1 or 3.3.2 on the Geos. It's running my primary internet connection(s) now
Apr 16 15:33:04 <dwmw2> 3.3 was also fine.
Apr 16 15:33:27 <dwmw2> that's dual pppoa + teql
Apr 16 15:35:31 <CIA-54> jow * r31311 /trunk/package/iproute2/ (Makefile files/ files/30-teql):
Apr 16 15:35:31 <CIA-54> iproute2: Add hotplug script to add slave devices to TEQL master
Apr 16 15:35:31 <CIA-54> Resolves https://dev.openwrt.org/ticket/11192
Apr 16 15:35:31 <CIA-54> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Apr 16 15:35:33 <CIA-54> jow * r31312 /trunk/target/linux/generic/ (2 files in 2 dirs):
Apr 16 15:35:33 <CIA-54> Update ppp TX restart patch to avoid race condition
Apr 16 15:35:33 <CIA-54> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Apr 16 15:35:33 <CIA-54> jow * r31313 /trunk/target/linux/generic/ (2 files in 2 dirs):
Apr 16 15:35:34 <CIA-54> Fix bufferbloat in PPPoATM TX queue
Apr 16 15:35:34 <CIA-54> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Apr 16 15:35:35 <CIA-54> jow * r31314 /trunk/target/linux/x86/geos/target.mk: [geos] bump to Linux v3.3.1
Apr 16 15:35:54 <dwmw2> thanks
Apr 16 15:36:03 * danmackay watches my 9000000th rebuild building
Apr 16 15:42:20 <CIA-54> jow * r31315 /trunk/tools/mklibs/patches/011-missing_unistd.patch:
Apr 16 15:42:20 <CIA-54> tools/mklibs: add missing <unistd.h> in readelf/elf.cpp
Apr 16 15:42:20 <CIA-54> Fixes compile on my Arch Linux system, as unistd.h is needed for ::close().
Apr 16 15:42:20 <CIA-54> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Apr 16 16:00:24 <dwmw2> 1 out of 1 hunk FAILED -- saving rejects to file src/mklibs-readelf/elf.cpp.rej
Apr 16 16:00:24 <dwmw2> Patch failed!  Please fix ./patches/011-missing_unistd.patch!
Apr 16 16:03:06 <dwmw2> jow_laptop: that last commit breaks here.
Apr 16 16:06:33 <CIA-54> jow * r31316 /trunk/tools/mklibs/patches/011-missing_unistd.patch: [tools] mklibs: revert r31315
Apr 16 16:08:43 <jow_laptop> yeah, someone else added the same change a few days earlier
Apr 16 16:15:46 <danmackay> http://danmackay.com/cluevpn.tar.gz hmm, anyone want to write this into a openwrt make file for me
Apr 16 16:16:01 <danmackay> im a noob when it comes to that stuff
Apr 16 16:18:06 <guerby> hi, did anyone package NUT (Network UPS Tools) for openwrt official repo? I find them over the net: https://forum.openwrt.org/viewtopic.php?id=26269   and upstream developpers seem reactive, thx
Apr 16 16:23:32 <jow_laptop> no
Apr 16 16:32:37 <guerby> jow_laptop, ok, do you know what's needed for such contrib to be included?
Apr 16 16:33:07 <jow_laptop> an OpenWrt Makefile
Apr 16 16:55:10 <guerby> jow_laptop, ok will try tonight with a friend. NUT has one driver per family of UPS, on amd64 each driver is about 60 kB total 2.4 MB. since we're trying to put it on a 703N with 4 MB flash (1.5 MB usable) I think it will be better to split binaries, is there a prefered way to do that?
Apr 16 16:56:05 <jow_laptop> make a package nut providing the base and then several nut-mod-xyz covering the different drivers
Apr 16 16:56:56 <guerby> jow_laptop, ok thx
Apr 16 16:58:15 <jow_laptop> with some clever templating you can reduce the effort for the -mod- packages to a simple list of driver names
Apr 16 16:58:24 <jow_laptop> see for example the collectd or znc packages
Apr 16 16:58:29 <jow_laptop> or coreutils
Apr 16 17:13:05 <guerby> jow_laptop, thx, (our small project http://chiliproject.tetaneutral.net/projects/tetaneutral/wiki/Openwrt#OpenWRT-and-Network-UPS-Tools
Apr 16 17:29:30 <HeXiLeD> i just updated my feeds using -a and it still pulls batman-adv 2012.0 . is this intended ? or should i add batman-adv feed to the feeds list ?
Apr 16 17:34:44 <jow_laptop> what?
Apr 16 17:38:33 <HeXiLeD> after updating backfire revision 31316 i checked batman-adv package to see which release is being used and it shows PKG_VERSION:=2012.0.0 while 2012.1.0 and a newer one is available .
Apr 16 17:38:47 <jow_laptop> define available
Apr 16 17:39:10 <jow_laptop> our packages do not upgrade themselves magically just because one of the 2000 upstream projects made a release
Apr 16 17:39:54 <HeXiLeD> by the traditional openwrt method. this is why i asked if i need to build adding src-svn batman http://downloads.open-mesh.org/svn/openwrt-feed/ to openwrt feeds list/
Apr 16 17:39:57 <HeXiLeD> yes i understand
Apr 16 17:40:01 <HeXiLeD> :)
Apr 16 17:40:19 <jow_laptop> yes, most likely you will need the feed offered by open-mesh
Apr 16 17:40:33 <HeXiLeD> just wondering if it is being held back for specific reasons.
Apr 16 17:40:38 <HeXiLeD> ok works for me :)
Apr 16 17:41:26 <jow_laptop> "held back" is a strong term for a release that is 14 days old
Apr 16 17:42:50 <HeXiLeD> poor choice of words i confess.
Apr 16 17:43:31 <jow_laptop> :)
Apr 16 18:07:16 <CIA-54> marek * r31317 /packages/net/batman-adv/ (4 files in 4 dirs):
Apr 16 18:07:16 <CIA-54> batman-adv: upgrade package to latest release 2012.1.0
Apr 16 18:07:16 <CIA-54> Also fix hotplug scripts to load batman-adv module when necessary.
Apr 16 18:07:16 <CIA-54> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Apr 16 19:43:39 <CIA-54> acinonyx * r31318 /packages/net/netatalk/ (Makefile files/afpd.init): [packages] netatalk: Fix typo in init script (#11287)
Apr 16 19:46:12 <CIA-54> acinonyx * r31319 /packages/net/olsrd/patches/110-fix_metric_parsing.patch: [packages] olsrd: Fix quagga plugin metric parsing
Apr 16 20:04:42 <CIA-54> jow * r31320 /branches/packages_10.03.2/net/netatalk/ (Makefile files/afpd.init): [packages_10.03.2] merge r31318
Apr 16 21:38:04 <CIA-54> nbd * r31321 /branches/backfire/package/mac80211/patches/300-pending_work.patch: mac80211: fix ad-hoc mode 802.11n channel type
Apr 16 21:39:30 <CIA-54> nbd * r31322 /trunk/package/mac80211/ (96 files in 2 dirs): mac80211: update to wireless-testing 2012-04-13
Apr 16 21:39:50 <jow_laptop> yay, rebuild time
Apr 16 21:40:14 <nbd> that backfire commit should hopefully take care of the reported performance issues with 802.11n ad-hoc
Apr 16 21:40:46 <jow_laptop> should be done tomorrow morning
Apr 16 21:44:07 <CIA-54> nbd * r31323 /trunk/package/iw/patches/001-nl80211_h_sync.patch: iw: sync nl80211.h update with compat-wireless
Apr 16 22:51:35 <CIA-54> acinonyx * r31324 /packages/ipv6/miredo/ (Makefile patches/120-automake-compat.patch): [packages] miredo: Fix compiling with automake v1.11.3 (#11283)
Apr 16 23:38:55 <swalker> jow_laptop: I don't know mhei's reason(s) but afaik their only use is for devel/linking and nico iirc has been removing them
Apr 16 23:39:34 <jow_laptop> swalker: I see, we need to bring this up then
Apr 16 23:57:06 <CIA-54> acinonyx * r31325 /packages/net/openvpn/Makefile: [packages] openvpn: Bump to v2.2.2 (#11293)
Apr 17 00:00:13 <builder> build #165 of at91 is complete: Failure [failed compile_10]  Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/165
Apr 17 00:36:29 <CIA-54> nbd * r31326 /trunk/package/mac80211/patches/ (5 files): ath9k/ath5k: fix driver load issues with mesh support compiled out
Apr 17 01:21:02 <builder> build #153 of pxcab is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/153
Apr 17 01:29:09 <builder> build #167 of s3c24xx is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/167
Apr 17 02:30:06 <builder> build #143 of uml is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/143
Apr 17 02:35:39 <builder> build #144 of x86 is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/144
**** ENDING LOGGING AT Tue Apr 17 02:59:59 2012