**** BEGIN LOGGING AT Fri Jun 08 02:59:59 2012
Jun 08 05:48:36 <builder_> build #33 of at91 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/33
Jun 08 06:15:14 <builder_> build #31 of orion is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/31
Jun 08 07:39:37 <builder_> build #33 of atheros is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/33
Jun 08 07:44:37 <builder_> build #36 of brcm63xx is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/36
Jun 08 08:37:51 <builder_> build #35 of brcm47xx is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/35
Jun 08 08:38:00 <builder_> build #29 of ramips is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/29
Jun 08 08:38:13 <builder_> build #36 of cobalt is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/36
Jun 08 09:18:15 <russell--> Installing diffutils (3.0-2) to root...
Jun 08 09:18:15 <russell--> Collected errors: * pkg_run_script: package "diffutils" preinst script returned status 9.
Jun 08 12:09:39 <CIA-84> nbd * r32126 /trunk/package/mac80211/files/regdb.txt: mac80211: remove the passive-scan/no-ibss flag of channels 36-48 in the world regd similar to the default regd in ath
Jun 08 12:35:18 <rkreis> blogic, do you feel like helping me port openwrt to my router? it's that one: http://wiki.openwrt.org/toh/arcadyan/arv7506
Jun 08 12:35:55 <rkreis> u-boot and the kernel are running, but the kernel seems not to know the mtd layout
Jun 08 12:37:35 <blogic> ok
Jun 08 12:37:53 <rkreis> great :)
Jun 08 12:38:04 <blogic> nice looking unit
Jun 08 12:38:13 <blogic> gimme a sec
Jun 08 12:38:35 <rkreis> it seems to be quite similar to the arv7516
Jun 08 12:41:51 <blogic> ok here i am
Jun 08 12:41:56 <blogic> its a 8mb flash unit
Jun 08 12:42:06 <blogic> how are you booting it ?
Jun 08 12:42:17 <blogic> brnloader or uboot ?
Jun 08 12:42:33 <rkreis> i kept brnloader on it, then i load uboot into ram and boot it from brnloader
Jun 08 12:42:43 <blogic> ok
Jun 08 12:42:52 <blogic> you can boot directly from brnloader
Jun 08 12:43:02 <blogic> currently we support brnloader or uboot
Jun 08 12:43:13 <blogic> but not the brnloader->uboot->linux version
Jun 08 12:43:17 <rkreis> i see
Jun 08 12:43:20 <blogic> this would explain why it breaks for you
Jun 08 12:43:30 <stintel> so I mailed mikrotik to request the kernel patch(es) for the RB2011L-IN. hope that will help me fix the ethernet ports and switches
Jun 08 12:44:13 <blogic> rkreis: so when the system boots it will try to work out if it is a brnboot or uboo timage and set the according mtd partition map
Jun 08 12:44:26 <blogic> so oyu should try without the intermediate uboot
Jun 08 12:44:37 <rkreis> i'll try
Jun 08 12:44:42 <blogic> or add logic to the mach-arv.c file for your use case
Jun 08 12:44:46 <rkreis> i'm trying to preserve as much of the original firmware as i can for now
Jun 08 12:44:53 <blogic> makes sense
Jun 08 12:45:08 <rkreis> the factory layout has 2 boot images, can i leave the original firmware on the first and put openwrt on the second?
Jun 08 12:45:22 <rkreis> that would give me a dual boot router :)
Jun 08 12:45:27 <blogic> haha
Jun 08 12:45:28 <blogic> no idea
Jun 08 12:45:38 <blogic> i never tried the brnboot beyond checking that it works
Jun 08 12:45:44 <blogic> i reflash uboot on all units
Jun 08 12:45:47 <rkreis> i see
Jun 08 12:45:50 <blogic> brnloader is closed source
Jun 08 12:46:07 <blogic> mb__: good morning
Jun 08 12:46:10 <rkreis> i wouldn't mind using uboot, but it fails to activate the ethernet switch, so i can't use tftp or anything
Jun 08 12:46:21 <blogic> yes
Jun 08 12:46:30 <blogic> rkreis: i will fix the ethernet issue the next few days
Jun 08 12:46:31 <rkreis> does uboot support xmodem or similar or will i end up with a semi-bricked device if uboot doesn't have network access?
Jun 08 12:46:47 <blogic> there is a hardware hack to recover the unit
Jun 08 12:47:00 <blogic> you need to shortcu 2 resistors for then
Jun 08 12:47:07 <blogic> R68 and R74 is i am not mistaken
Jun 08 12:47:24 <blogic> however, the ethernet uboot problem is a known issue and i will fix it the coming days
Jun 08 12:48:25 <rkreis> that sounds great :)
Jun 08 12:49:28 <blogic> rkreis: basically latest gcc fails to compile sane binaries
Jun 08 12:49:36 <rkreis> oops
Jun 08 12:49:37 <blogic> the efault gcc from around last december works though
Jun 08 12:49:46 <blogic> we already know whats wrong
Jun 08 12:49:52 <blogic> just need to find the time to fix it
Jun 08 12:50:08 <blogic> mb___zzzZz___: and back to bed ...
Jun 08 12:50:10 <blogic> :-)
Jun 08 12:50:42 <mb__> blogic: hehe. Sorry :)
Jun 08 12:50:51 <rkreis> i'm using gcc 4.6.x with Linaro enhancements right now, should i bother trying 4.7?
Jun 08 12:50:58 <mb__> should be working now, blogic :)
Jun 08 12:51:19 <blogic> rkreis: more like an older version rather than a newer one
Jun 08 12:51:26 <blogic> mb__: i dont mind
Jun 08 12:51:30 <blogic> i was jelaouse
Jun 08 12:51:35 <blogic> i am tired and want to sleep
Jun 08 12:51:36 <blogic> :-)
Jun 08 12:51:42 <rkreis> so 4.5.x might do?
Jun 08 12:51:52 <blogic> rkreis: that is what i am palnning to try
Jun 08 12:51:54 <blogic> :-)
Jun 08 12:51:58 <blogic> i cant say for sure
Jun 08 12:52:03 <rkreis> i'll give it a shot
Jun 08 12:52:09 <blogic> apparently a svn checkout from december makes uboot work
Jun 08 12:52:26 <blogic> there is a forum post related to arv752dpw that has his info in it
Jun 08 12:52:42 <rkreis> ok
Jun 08 13:11:46 <stintel> awesome, already got the patch
Jun 08 13:13:08 <stintel> ok. this is awesome
Jun 08 13:23:35 <stintel> lol instead of forward-porting there qos scripts to whatever new there is they backported imq for 2.6.35
Jun 08 13:23:38 <stintel> meh
Jun 08 14:20:36 <CIA-84> jow * r32127 /trunk/package/firewall/ (Makefile files/firewall.config): [package] firewall: allow incoming ICMPv6 router-advertisement and neighbor-advertisement, thanks swalker
Jun 08 14:22:40 <_trine> nbd trunk  r32126 is not providing any leases
Jun 08 14:35:26 <nbd> _trine: make a paste of /var/etc/dnsmasq.conf
Jun 08 14:37:14 <CIA-84> jow * r32128 /branches/backfire/tools/mklibs/patches/ (3 files): [backfire] mklibs: merge r31259
Jun 08 14:43:20 <_trine> nbd, sorry was on the phone
Jun 08 14:43:25 <_trine> http://dpaste.com/756663/
Jun 08 14:46:23 <nbd> i see no dhcp range in there
Jun 08 14:46:43 <nbd> please make a paste of /etc/config/network, /etc/config/dhcp
Jun 08 14:47:04 <jow_laptop> I thin kthere is just another server on the segment
Jun 08 14:47:33 <nbd> oh, right
Jun 08 14:47:54 <_trine> nbd, http://dpaste.com/756664/
Jun 08 14:48:10 <nbd> didn't you connect your nano to another router at some point?
Jun 08 14:48:25 <_trine> this i smy main router
Jun 08 14:48:36 <nbd> right
Jun 08 14:48:42 <_trine> the 3700
Jun 08 14:48:46 <nbd> try restarting dnsmasq
Jun 08 14:48:47 <jow_laptop> /etc/init.d/dnsmasq restart; sleep 3; logread | grep already
Jun 08 14:49:11 <_trine> I tried rebooting before
Jun 08 14:49:38 <_trine> jow_laptop, is that command for me?
Jun 08 14:49:49 <jow_laptop> yes
Jun 08 14:49:55 <_trine> ok
Jun 08 14:50:38 <_trine> is it supposed to show me something somewhere
Jun 08 14:50:58 <_trine> it does not return anything
Jun 08 14:51:02 <jow_laptop> not necessarily
Jun 08 14:51:08 <jow_laptop> paste your /etc/config/dhcp
Jun 08 14:51:47 <_trine> http://dpaste.com/756667/
Jun 08 14:52:42 <jow_laptop> ok
Jun 08 14:52:44 <jow_laptop> looks all fine
Jun 08 14:53:23 <_trine> I added the # to the option 'ignore' '1' under vpn but it has not taken effect yet because I have not restarted just in case anyone was wondering
Jun 08 14:54:32 <_trine> hey its working since I restarted dnsmasq
Jun 08 14:54:46 <jow_laptop> so it was a server colission most likely
Jun 08 14:54:48 <_trine> but with did it not when I rebooted
Jun 08 14:55:01 <jow_laptop> that has been the case the last few times you reported this issue
Jun 08 14:55:25 <_trine> no nbd fixed it last time it was an error
Jun 08 14:55:51 <_trine> I will try a reboot to make sure
Jun 08 14:56:21 <jow_laptop> fine. so next time please check logread and only report this if it does not state "found already running DHCP-server on interface"
Jun 08 14:58:41 <_trine> it is working now after the reboot as well but it didnt the first time
Jun 08 15:10:22 <CIA-84> nbd * r32129 /trunk/ (5 files in 4 dirs): make librpc compatible with eglibc, unconditionally enable it for packages that need rpc support
Jun 08 15:11:17 <stintel> jow_laptop: maybe that warning should be spawned to stdout instead of to logread
Jun 08 15:11:32 <stintel> jow_laptop: I would like to see that immediately when restarting dnsmasq
Jun 08 15:11:48 <stintel> and it would avoid users seeking support for it ;)
Jun 08 15:26:16 <_trine> jow when i reported no leases were being given out I also tried on more than one occasion udhcpc -i eth0 then when no lease was given I rebooted the router and tried udhcpc -i eth0 again and still no lease was given not on eth0 nor wlan0 however after restarting dnsmasq manually which should have occurred anyway as a result of the reboot it did start to had out leases
Jun 08 15:26:51 <_trine> I have no idea why that should occur
Jun 08 15:56:23 <_trine> hand*
Jun 08 16:09:52 <builder_> build #29 of pxcab is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/29
Jun 08 16:41:47 <stintel> _trine: you could put option force 1
Jun 08 16:42:29 <_trine> its working ok now though
Jun 08 18:57:47 <rkreis> blogic, uboot plays along with my ethernet hub now :)
Jun 08 18:58:40 <rkreis> i based my uboot config on the ARV7516, but that oe has another switch and i forgot to change it
Jun 08 18:59:06 <luka12345> rkreis: which switch chip do you have?
Jun 08 18:59:16 <rkreis> RTL8306G
Jun 08 18:59:41 <luka12345> ok
Jun 08 19:00:13 <rkreis> uboot's failsafe ui looks much better than anything the original firmware spit out already :D
Jun 08 19:00:21 <luka12345> :)
Jun 08 19:00:35 <rkreis> i could probably try booting over tftp...
Jun 08 19:00:37 <luka12345> issues that blogic said were on atheros ar8216 btw.
Jun 08 19:00:54 <rkreis> ok
Jun 08 19:00:58 <rkreis> that's the one i had there at first
Jun 08 19:01:13 <rkreis> and that's the one the ARV7516 uses, but this is ARV7506
Jun 08 19:01:22 <rkreis> ooor so
Jun 08 19:01:34 <rkreis> s/ARV7516/ARV7518
Jun 08 19:08:04 <rkreis> how can i found out whether uboot will run even when it's not started from brnboot?
Jun 08 19:08:17 <rkreis> i can't, can i?
Jun 08 19:10:52 <luka12345> i dont understand... what you want to do?
Jun 08 19:11:05 <luka12345> what i usually do when i have uart of the board is
Jun 08 19:11:11 <luka12345> boot uboot from uart
Jun 08 19:11:16 <luka12345> dump flash from uboot
Jun 08 19:11:24 <luka12345> burn uboot on the flash
Jun 08 19:11:37 <rkreis> i dumped the flash from brnboot already
Jun 08 19:11:43 <luka12345> ok
Jun 08 19:11:52 <luka12345> so you can burn uboot on the board :)
Jun 08 19:11:53 <rkreis> but if i burn uboot on the flash (replacing brnboot) and it doesn't work for some reason, i'm a little screwed
Jun 08 19:12:04 <luka12345> do you know uart pins?
Jun 08 19:12:15 <rkreis> yes, but they won't help me, will they?
Jun 08 19:12:38 <luka12345> they will
Jun 08 19:12:58 <luka12345> try to enable uart mode
Jun 08 19:13:00 <rkreis> oh, you mean those other ones that you have to short to enable booting from uart?
Jun 08 19:13:07 <rkreis> in that case, i have no idea where they are...
Jun 08 19:13:38 <luka12345> look for the other arcadyan boards on the wiki
Jun 08 19:13:49 <luka12345> ARV7518 for example
Jun 08 19:13:56 <rkreis> blogi c mentioned where they are on another board
Jun 08 19:14:26 <luka12345> i think they are on the same place on the all arcadyan boards
Jun 08 19:14:37 <luka12345> i have/had 3 different models from them
Jun 08 19:14:41 <rkreis> i see
Jun 08 19:15:06 <luka12345> so look wiki for ARV7518 and try to enable uart like it says for that one
Jun 08 19:15:24 <rkreis> do you suggest finding and testing those first or simply flashing uboot and hoping it works and looking for those only when it doesn't?
Jun 08 19:15:39 <luka12345> try uart first, it's safer
Jun 08 19:15:44 <rkreis> ok
Jun 08 19:15:56 <rkreis> once i enabled uart mode, it's pretty much impossible to brick it?
Jun 08 19:18:04 <luka12345> yes
Jun 08 19:18:16 <KanjiMonster> uart mode is nice
Jun 08 19:28:32 <rkreis> is it in the front side of the PCB?
Jun 08 19:31:35 <luka12345> rkreis: there are pictures on the wiki
Jun 08 19:31:40 <luka12345> it should be on the back
Jun 08 19:32:41 <rkreis> i am looking at the pictures
Jun 08 19:32:49 <rkreis> i just can't see which side i should be looking on :D
Jun 08 19:33:43 <luka12345> find the Rxx labels
Jun 08 19:33:52 <luka12345> they might not be on the same place...
Jun 08 19:35:02 <rkreis> ok
Jun 08 19:41:09 <rkreis> i'm having a hard time finding them...
Jun 08 19:41:38 <rkreis> i hope they aren't right next to the soc under the heatsink
Jun 08 19:46:02 <rkreis> i found R65 and that one is right next to it
Jun 08 19:46:18 <rkreis> yuck
Jun 08 19:59:15 <CIA-84> mb * r32130 /trunk/Config.in: Fix early printk compile on ARM
Jun 08 20:00:16 <rkreis> i took a few pictures
Jun 08 20:00:29 <rkreis> too bad that downloading them from the phone to the computer takes longer than uploading them to the internet :D
Jun 08 20:02:00 <rkreis> the whole board: http://i.imgur.com/BGHKq.jpg http://i.imgur.com/RtUzI.jpg
Jun 08 20:02:17 <rkreis> luka12345, it's those, isn't it? http://i.imgur.com/ZLqxC.jpg
Jun 08 20:02:46 <rkreis> above the XO
Jun 08 20:11:53 <russell--> jow_laptop: your diffutils patch is broken
Jun 08 20:12:50 <russell--> it exit 9's deterministically
Jun 08 20:38:36 <russell--> https://dev.openwrt.org/ticket/11614
Jun 08 20:40:29 <builder_> build #27 of xburst is complete: Failure [failed compile_6]  Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/27
Jun 08 20:40:31 <rkreis> looks like uart mode is a bit of a problem... what can go wrong when i erase brnboot and flash uboot?
Jun 08 20:49:57 <Delboy_> rkreis: it may not boot, or maybe network wont work in uboot
Jun 08 20:50:25 <rkreis> network will be fine because uboot works from ram, i guess
Jun 08 20:50:58 <rkreis> i mean i tested uploading uboot to ram and that went fine
Jun 08 20:51:03 <Delboy_> best thing would be to add loadb to uboot
Jun 08 20:51:10 <Delboy_> ok
Jun 08 20:51:10 <rkreis> what is that?
Jun 08 20:51:33 <Delboy_> you can send img to uboot via serial if you network fails
Jun 08 20:51:39 <rkreis> i see
Jun 08 20:51:46 <Delboy_> *via x or y modem
Jun 08 20:52:24 <Delboy_> have you managed to found r80 location?
Jun 08 20:52:36 <rkreis> unfortunately not
Jun 08 20:53:12 <Delboy_> can't you just remove that heatsink
Jun 08 20:53:38 <rkreis> can i?
Jun 08 20:53:45 <Delboy_> on other arcadyan boards, it is easy to remove it
Jun 08 20:54:10 <rkreis> i will try with moderate force
Jun 08 20:54:39 <Delboy_> just rotate it, i think that is the easiest way
Jun 08 20:56:10 <rkreis> i managed to lift it a little, and r80 is indeed right under it
Jun 08 20:56:14 <rkreis> that's pretty smart design...
Jun 08 21:10:30 <builder_> build #29 of ppc40x is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/29
Jun 08 22:03:07 <builder_> build #29 of uml is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/29
Jun 08 22:18:05 <builder_> build #26 of au1000 is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/26
Jun 08 23:17:48 <CIA-84> luka * r32131 /trunk/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c: kirkwood: ib62x0 fix reboot
Jun 08 23:28:45 <CIA-84> luka * r32132 /packages/net/git/ (Makefile patches/110-convert_builtin.patch): [packages] git: update to 1.7.10.4
Jun 09 00:00:03 <builder_> build #32 of rb532 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/32
Jun 09 00:01:48 <CIA-84> jow * r32133 /packages/devel/diffutils/Makefile: [packages] diffutils: fix typo (#32122)
Jun 09 00:27:03 <builder_> build #29 of x86 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/29
Jun 09 00:53:14 <builder_> build #28 of ar7 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/28
Jun 09 01:12:01 <builder_> build #29 of sibyte is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/29
Jun 09 01:22:11 <stintel> bummer, it doesn't seem to recognize the ar8327 switch: [    9.320000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004d004d, driver=Generic PHY]
Jun 09 01:48:49 <builder_> build #27 of kirkwood is complete: Failure [failed compile_6]  Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/27
Jun 09 01:53:32 <builder_> build #24 of mpc52xx is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/24
Jun 09 01:56:56 <builder_> build #31 of ppc44x is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/31
Jun 09 01:58:44 <builder_> build #27 of octeon is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/27
Jun 09 02:01:41 <builder_> build #34 of s3c24xx is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/34
Jun 09 02:04:35 <builder_> build #34 of at91 is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/34
Jun 09 02:06:51 <builder_> build #36 of brcm47xx is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/36
Jun 09 02:07:31 <danmackay> you are a failure, go away
Jun 09 02:08:56 <builder_> build #34 of atheros is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/34
Jun 09 02:11:14 <builder_> build #37 of cobalt is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/37
Jun 09 02:13:28 <builder_> build #32 of orion is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/32
Jun 09 02:15:54 <builder_> build #30 of lantiq is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/30
Jun 09 02:18:27 <builder_> build #30 of ramips is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/30
Jun 09 02:21:03 <builder_> build #30 of pxcab is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/30
Jun 09 02:23:31 <builder_> build #30 of ppc40x is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/30
Jun 09 02:24:15 <roh> so thats what a failstorm looks like then? ;)
Jun 09 02:25:41 <stintel> apparently :)
Jun 09 02:25:54 <builder_> build #33 of rb532 is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/33
Jun 09 02:28:20 <builder_> build #32 of ppc44x is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/32
Jun 09 02:31:44 <builder_> build #30 of uml is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/30
Jun 09 02:33:33 <builder_> build #30 of x86 is complete: Failure [failed compile_1]  Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/30
Jun 09 02:36:59 <builder_> build #29 of ar7 is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/29
Jun 09 02:39:37 <builder_> build #30 of sibyte is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/30
Jun 09 02:42:10 <builder_> build #30 of avr32 is complete: Failure [failed compile_2]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/30
**** ENDING LOGGING AT Sat Jun 09 02:59:59 2012