**** BEGIN LOGGING AT Sat Jun 16 02:59:59 2012 Jun 16 11:05:01 Hey guys, just a quick question: What is the serial pinout for the DIR-615 H1? I have it as VCC (not connected), GND, RX, TX Jun 16 11:05:16 My sources differ on this. Jun 16 11:06:23 can you measure it? Jun 16 11:07:09 Sadly, no. I have a multimeter, and I've confimed VCC and GND, but I can't scope out RX and TX. Jun 16 11:07:33 TX will have fluctuating voltage during boot Jun 16 11:07:47 it will show on the multimeter Jun 16 11:07:55 Ah yes, of course. Jun 16 11:08:01 you can safely connect anything to the receiving pin of your other device Jun 16 11:08:03 Now I'm feeling silly. Jun 16 11:08:13 (the one that is used to *send* the data comfing from the router) Jun 16 11:09:11 I'll try it out. Would be nice to be able to TFTP some stuff onto it. Jun 16 11:09:13 Thanks! Jun 16 11:14:29 Got it! It's GND,VCC,RX,TX Jun 16 11:15:03 I'm still a noob at this. Thanks for your help! Jun 16 11:15:19 Oh, sorry VCC,GND,RX,TX Jun 16 11:15:31 tftp over serial? how'd that work? :) Jun 16 11:16:00 It's presumably uBoot, but I'll be able to instruct it to TFTP from my machine. Jun 16 11:16:25 ok Jun 16 11:16:43 tftp works over ethernet, if you want to transfer files over serial, it's usually xmodem (just to clarify) Jun 16 11:18:16 Reminds me of my old Atari Falcon030 with a broken floppy drive. It had some xmodem software on its HDD, and I used that to install a load of stuff. Jun 16 11:18:37 Thank deity it was there. Jun 16 11:19:25 :) Jun 16 11:19:45 Well, I'll drop by and let you know how it goes. Jun 16 11:19:49 See ya! Jun 16 11:20:19 yay, writing from my openwrt box (serial console) :) Jun 16 11:20:34 adsl magically started working Jun 16 11:20:40 now if only i had ethernet... Jun 16 11:23:04 blogic, any hints? Jun 16 11:47:35 rkreis: working on it Jun 16 11:47:43 i have been playing on uboot last night Jun 16 11:47:49 thought i made it work but then not Jun 16 11:48:07 rkreis: also there is an auction later today for that unit so i will try to get one Jun 16 11:49:05 nice :) Jun 16 11:49:26 i'm booting from an initramfs at the moment Jun 16 11:49:42 then i can play around with the userspace already Jun 16 14:52:35 blogic * r32388 /trunk/package/ltq-tapidemo/Makefile: [ltq-tapidemo] set explicit -lpthread Jun 16 16:45:30 florian * r32389 /trunk/target/linux/rdc/Makefile: Jun 16 16:45:30 [rdc] remove broken flags Jun 16 16:45:30 Thanks to Nicolas Le Falher for testing on Bifferboard. Jun 16 16:45:52 awesome Jun 16 18:56:37 build #0 of brcm63xx is complete: Exception [exception shell_2] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/0 Jun 16 19:34:16 swalker * r32390 /packages/net/tor/Makefile: [packages] tor: update to 0.2.2.36 Jun 16 19:34:46 swalker * r32391 /packages/net/tor-alpha/Makefile: [packages] tor-alpha: update to 0.2.3.17-beta, disable bufferevents because of hangs on ar71xx Jun 16 20:44:30 is there a proper way to generate a config for a target/linux//config- ? Jun 16 20:45:06 thepeople * r32392 /packages/utils/freecwmp/Makefile: mark as broken for now, it is causing defconfig to get stuck in a infinite loop Jun 16 20:45:39 m4t: try this: make kernel_menuconfig CONFIG_TARGET=subtarget Jun 16 20:48:28 build #0 of at91 is complete: Exception [exception interrupted] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/0 Jun 16 20:48:36 build #0 of atheros is complete: Exception [exception interrupted] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/0 Jun 16 20:48:50 okay Jun 16 20:48:52 build #0 of brcm47xx is complete: Exception [exception interrupted] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/0 Jun 16 20:48:57 then copy the file over? Jun 16 20:49:08 it won't actually save it to target/linux/... will it? Jun 16 20:49:08 build #0 of cobalt is complete: Exception [exception interrupted] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/0 Jun 16 20:49:27 this is a new platform im toying with Jun 16 20:49:31 build #0 of ppc40x is complete: Exception [exception interrupted] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/0 Jun 16 20:49:40 build #0 of ppc44x is complete: Exception [exception interrupted compile_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/0 Jun 16 20:53:09 build #0 of pxcab is complete: Exception [exception shell_5 shell_15 compile_12] Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/0 Jun 16 20:53:09 build #0 of lantiq is complete: Exception [exception download_1] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/0 Jun 16 20:53:09 build #0 of ramips is complete: Exception [exception download_1] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/0 Jun 16 20:54:44 okay Jun 16 20:54:47 i get a parse error Jun 16 20:54:51 in kconfig.pl Jun 16 20:54:54 * m4t investigates Jun 16 20:55:27 build #0 of ar7 is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/0 Jun 16 20:56:05 parse error at EOF in the .config Jun 16 20:56:09 last line Jun 16 21:06:22 nbd * r32393 /trunk/package/fuse/patches-kernel24/: fuse: remove obsolete patches Jun 16 21:06:25 nbd * r32394 /trunk/package/ (fuse/Makefile kernel/modules/fs.mk): fuse: move kmod-fuse to package/kernel Jun 16 21:06:34 nbd * r32395 /trunk/target/linux/ (3 files in 2 dirs): Jun 16 21:06:34 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets Jun 16 21:06:34 The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk Jun 16 21:06:38 nbd * r32396 /trunk/package/fuse/ (3 files in 2 dirs): fuse: update to 2.9.0 Jun 16 21:08:20 hmm Jun 16 21:09:26 http://pastebin.com/y1vzSUk9 Jun 16 21:09:41 its just choking then zeroing the config i had there... Jun 16 21:13:35 oh Jun 16 21:13:41 is there no base 3.1 config? Jun 16 21:13:52 right Jun 16 21:13:56 the only base config is 3.3 now Jun 16 21:14:00 all older versions have been removed Jun 16 21:14:41 yeah well that extra space in there kind of hinted it Jun 16 21:15:03 unfortunately this 3.1 is the latest in existence for this platform Jun 16 21:15:23 then i guess some forward porting is needed Jun 16 21:15:56 the maintainer(s) are actually backporting... Jun 16 21:16:04 and moving to 2.6.31 :( Jun 16 21:16:08 with devtmpfs Jun 16 21:16:36 config-3.1 back from the dead Jun 16 21:17:55 what hardware platform is that btw? Jun 16 21:18:07 its a pogoplug pro, oxnas820 Jun 16 21:18:13 which is an mpcorenovfp Jun 16 21:18:26 with rt2800pci Jun 16 21:18:53 there's 0 upstream support for the platform Jun 16 21:18:59 its all outdated gpl sources Jun 16 21:19:15 3.1 sounds somewhat recent Jun 16 21:19:31 shouldn't be too much work forward-porting this Jun 16 21:21:50 i almost bought this feroceon variant of the plug a couple days ago Jun 16 21:22:02 i figured i've put enough time into this, i might as well see it to completion Jun 16 21:22:16 much better upstream support for that cpu Jun 16 21:22:21 its mainline in fact Jun 16 21:23:14 i was using openembedded eglibc/systemd, and it was hanging at reboot/shutdown Jun 16 21:23:27 so i thought i'd try openembedded uclibc, which turns out to be broken all around Jun 16 21:23:45 which is why i'm trying openwrt with uclibc+sysvinit now Jun 16 21:27:58 build #2 of s3c24xx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/2 Jun 16 21:52:03 build #0 of avr32 is complete: Failure [failed compile_6] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/0 Jun 16 21:52:49 nbd: not sure if r32356 was specifically in response to my bug with ap+sta, but the workaround still doesn't change my issue :\ still have to reboot if i try to re-run 'wifi' after the system is up and running Jun 16 23:07:16 build #0 of au1000 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/0 **** ENDING LOGGING AT Sun Jun 17 02:59:59 2012