**** BEGIN LOGGING AT Thu Sep 27 02:59:57 2012 Sep 27 03:27:41 build #49 of gemini is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/49 **** ENDING LOGGING AT Thu Sep 27 08:14:33 2012 **** BEGIN LOGGING AT Thu Sep 27 08:16:20 2012 Sep 27 09:04:38 what is the relation between rm and collected? Sep 27 09:04:45 http://iyanwu.com/pastebin/showthread.php?tid=1790 Sep 27 09:04:54 http://iyanwu.com/pastebin/showthread.php?tid=1791 Sep 27 10:43:11 build #46 of octeon is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/46 Sep 27 11:18:26 build #79 of s3c24xx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/79 Sep 27 12:12:45 hello, i just svn updated, compiled trunk for dlink dir615 h1 and mtd write it to firmware and at boot i get: http://pastebin.com/haiRYJLX Sep 27 12:17:52 blogic, ping if i may ;) Sep 27 13:00:05 dape: hi Sep 27 13:00:19 then you flashed a bad image i would guess Sep 27 13:02:14 dape: which image did you flash ? Sep 27 13:19:15 hello, sorry, was crawling around the house, i mtd wrote openwrt-ramips-rt305x-dir-615-h1-squashfs-factory.bin to firmware Sep 27 13:20:14 dape: that is wrong Sep 27 13:20:27 use sysupgrade Sep 27 13:21:42 oki.. now.. to unbrick it i upload via tftp a initramfs image ? Sep 27 13:23:34 cant find on wiki related info to dir615 h1 Sep 27 13:24:09 http://wiki.openwrt.org/toh/d-link/dir-615 ? Sep 27 13:24:54 aah, was looking for tftp, let me try the usual firmware page Sep 27 13:48:50 blogic, got it on, strange thing, with a lan port connected i see the mac of this fedora laptop on eth0 rather than br-lan where its 00:00:00:00:00:00 Sep 27 13:51:06 oops,set option disabled 0 to wireless, ran "wifi" and it froze Sep 27 13:51:59 http://pastebin.com/V1cKnicU Sep 27 13:52:34 while i was pastebinning, it reset itself Sep 27 13:52:50 i see wlan0 up Sep 27 14:01:13 ? Sep 27 14:01:18 so its working now or not ? Sep 27 14:02:36 im on it serial , seems ok, gotta remmeber how to tag ports for lan and separate wan then i will test wireless Sep 27 14:02:43 seems way better than few good days ago Sep 27 14:07:10 does http://pastebin.com/5vvw6YiT looks sane or should i use something else than 'switch0' ? Sep 27 14:25:06 wan doesnt work with either eth0.2 nor eth1 Sep 27 14:43:26 dape: device is the name of the switch, so it should match the name option in your switch config section (which is btw missing there - there should be a "option name switch0") Sep 27 14:45:57 reading http://wiki.openwrt.org/doc/uci/network/switch but still nothing works Sep 27 14:51:00 maybe like this? http://pastebin.com/DPwJhMKF Sep 27 15:03:52 yes, looks correct Sep 27 15:05:14 dape: assuming the switch is available under the name eth0, yes (you can check with "swconfig dev eth0 help") Sep 27 15:06:24 it isnt.. jow_laptop can you remember please what was the name of the dlink dir 615 h1? rt something... Sep 27 15:07:19 in doubt just use "switch0" Sep 27 15:07:28 let me try Sep 27 15:12:45 router frozen, dmesg output and /etc/config/netowork -> http://pastebin.com/CXGZMG0K Sep 27 15:34:40 http://pastebin.com/k0Gq0fsY this is it ! Sep 27 15:37:03 awesome, option proto pppoe is working with ipv6 1 Sep 27 15:41:56 everything except wireless, i can't see it from other wireless devices Sep 27 16:01:23 http://superuser.com/questions/480414/why-top-command-dont-shows-the-right-result Sep 27 16:17:40 hehe, the question is about mem and the only answer is about cpu. lol Sep 27 16:29:35 you guys are awesome! i'm online here through the lan of the dir 615 h1 via ipv6 ;) Sep 27 16:31:38 this is the working /etc/config/network -> http://pastebin.com/du4H555R , i guess for wireless i can only wait and hope for developers Sep 27 16:48:33 85 down / 55 up on this dir615h1, much less than a similar atheros soc router Sep 27 17:00:03 would using snat in FORWARD cause trafic to be routed over the CPU? Sep 27 17:00:23 I thought the switch would handle that internally Sep 27 18:16:41 [florian]: did you intend to bump tiff to 4.0.3? 4.0.2 still suffers from CVE-2012-3401 Sep 27 19:06:52 blogic, ping please, i think i'm onto something Sep 27 19:08:02 i think i can see the wireless, i compiled in some more drivers from kernel modules, wireless section related to ralink and now some extra messages popping up on dmesg Sep 27 19:08:26 like these that i never seen so far: Sep 27 19:08:28 [ 11.140000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT305X.eeprom'. Sep 27 19:08:28 [ 11.290000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3352, rf: 000c, rev: 0200. Sep 27 19:13:48 ok Sep 27 19:13:53 looks like wifi Sep 27 19:14:06 still cant see it around.. Sep 27 19:14:07 do a "ls /lib/firmware" Sep 27 19:14:26 RT305X.eeprom rt2860.bin rt2870.bin rt73.bin Sep 27 19:14:28 you should see the RT305X.eeprom file there Sep 27 19:14:43 edit /etc/config/wirless Sep 27 19:14:56 rmove the "option disable 1" line Sep 27 19:15:06 save & close the file Sep 27 19:15:11 did it, wlan0 is up but.. cant see anything, did all that Sep 27 19:15:14 call "wifi up" in the Sep 27 19:15:28 cant see anything means ? Sep 27 19:15:37 you dont see the wifi from a client ? Sep 27 19:15:42 exactly, nothing Sep 27 19:16:02 both tablet and a wireless stick in a laptop, its set as ap, not encrypted, open.. Sep 27 19:16:12 hmmm Sep 27 19:16:13 strange Sep 27 19:16:22 never tested 3352 Sep 27 19:16:39 wlan0 says RX bytes:0 (0.0 B) TX bytes:2072 (2.0 KiB) Sep 27 19:20:17 maybe the lines on the bottom of this look interesting - http://pastebin.com/sFVpaqnK Sep 27 19:44:10 ah, i hit https://dev.openwrt.org/ticket/12146 too Sep 27 19:55:18 by the way, blogic can you please add to trunk these http://pastebin.com/qyhEvHky so people that flash their dlink dir615 with trunk won't need to solder serial to modify the file ? Sep 27 20:35:37 <[florian]> swalker: yeah, will fix that Sep 27 23:04:06 build #67 of x86 is complete: Failure [failed compile_1] Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/67 **** ENDING LOGGING AT Fri Sep 28 02:59:56 2012