**** BEGIN LOGGING AT Tue Oct 23 03:00:00 2012 Oct 23 04:11:13 fuk sakes lol Oct 23 04:11:16 [ 0.920000] bcm47xx_sflash: error registering platform driver: -19 Oct 23 04:11:41 I believe thats causing the ide module to oops Oct 23 04:11:52 time for bed :/ Oct 23 05:20:23 RealOpty_Laptop: u16 is unsigned 16-bit integer Oct 23 05:31:15 der sitzt auch nur rum und labert mit und macht nix Oct 23 05:31:21 oops Oct 23 05:31:24 morning Oct 23 11:01:55 hmmm, looks like there is no vmxnet3 driver in menuconfig. is this too late to add in AA ? it's just an existing driver in the kernel, but not in openwrt menuconfig Oct 23 11:29:13 <[florian]> stintel: that would be a tad too late yes, I am afraid it blows up on !x86 Oct 23 11:36:28 [florian]: well, it could depend on x86 then? would be pity not to have it. rather strange that is doesn't exist actually Oct 23 11:36:40 then again, maybe nobody uses vmware, and that's a good thing ;) Oct 23 11:37:34 or actually could have it depend on VMDK images Oct 23 13:25:00 hey, can you help with libusb mirror please?.. http://pastebin.com/XXt37Bc3 Oct 23 13:32:47 dape8708: i have uploaded it here: http://pastebin.lukaperkov.net/mirror/libusb-1.0.9.tar.bz2 just put it in your dl directory Oct 23 13:33:08 ah, crap, im so dumb, ofc i can do that myself :D Oct 23 13:33:13 anyways, thanks luka Oct 23 13:33:16 np Oct 23 13:41:50 bleh, wth.. now http://downloads.sourceforge.net/xtables-addons/xtables-addons-1.45.tar.xz Oct 23 13:46:40 something wrong with sourceforge today Oct 23 16:06:01 Hauke: hey. :) you have a minute? Oct 23 16:06:19 RealOpty_Laptop: yes Oct 23 16:25:29 Hauke: im having trouble with the IDE driver on brcm47xx. I think its due this: Oct 23 16:25:30 [ 0.920000] bcm47xx_sflash: error registering platform driver: -19 Oct 23 16:25:30 [ 0.928000] bcm47xx_nflash: error registering platform driver: -19 Oct 23 16:28:53 the kernel finds my mtd partitions just fine though: Oct 23 16:28:54 [ 0.816000] 5 bcm47xx partitions found on MTD device Physically mapped flash Oct 23 16:29:15 RealOpty: this is just an annoying error message, which dies not cause any problems Oct 23 16:29:38 okie ty Oct 23 16:31:25 20.884000] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Oct 23 16:31:25 [ 20.892000] Probing IDE interface ide0... Oct 23 16:31:26 [ 20.896000] Data bus error, epc == 81ba7c8c, ra == 81ba2e2c Oct 23 16:31:26 [ 20.896000] Oops[#1]: Oct 23 16:31:56 could you provide the full stack trace? Oct 23 16:32:17 Hauke: Yeah, im compiling it atm with debug Oct 23 17:11:56 bleh Oct 23 17:12:00 Hauke: http://paste.ubuntu.com/1300613/ Oct 23 17:12:13 is that a full stack trace? Oct 23 17:13:15 │ │ [*] Compile the kernel with symbol table information │ │ Oct 23 17:13:15 │ │ [*] Compile the kernel with tracing support Oct 23 17:14:17 maybe i need to do a make clean? Oct 23 17:29:51 guess not. looks like symbol info is there. Oct 23 17:37:36 Hauke: could this be a possible race condition. where the module is being loaded before the drive has spun up? Oct 23 18:17:22 Hauke: jffs2 images are broken on brcm47xx Oct 23 18:17:32 (just to let someone know) Oct 23 18:55:35 RealOpty_Laptop: thanks for the stack trace Oct 23 18:56:11 what device are you using? Oct 23 18:58:23 simpleshare Oct 23 19:00:36 Hi, do you know what can I do to offer the more information possible when reporting a kernel oops/kernel panic during boot in a openwrt kernel? Oct 23 19:01:03 [*] Compile the kernel with symbol table information Oct 23 19:01:12 enable that option in makemenu Oct 23 19:01:46 tonikasch: ^ Oct 23 19:02:01 RealOpty, ok, already done, thx Oct 23 19:02:16 RealOpty_Laptop, ^ Oct 23 19:02:35 Hauke: It uses the fallback sprom "1" Oct 23 19:04:38 I wouldnt have a complaint if the drive showed up in /dev/ but it dont once it oops. Oct 23 19:09:22 Hauke: maybe i need to do as suggested and use "probe_mask=0x3f" im not sure if the hardware qualifies though. Oct 23 19:10:18 kindof tedious to make changes, as jffs2 images dont generate. maybe i should hackup the linux/image file a bit Oct 23 19:10:29 RealOpty_Laptop: I do not know what's wrong there Oct 23 19:10:53 RealOpty_Laptop: I will look into jffs2 images in the next days Oct 23 19:11:08 Hauke: thanks for lookin for me though. appreciate it :) Oct 23 19:11:28 for you ide problem I think just debugging this would help Oct 23 19:12:03 you could add some printk s into the code and see where it fails Oct 23 19:12:09 did this ever worked? Oct 23 19:18:15 Hauke: yeah ide-core always worked Oct 23 19:19:41 since when does it not work any more? Oct 23 19:20:38 not exactly sure, havent done a upgrade in about ~6months Oct 23 19:24:55 cant find my notes, im gonna fire up the old build machine to see if i have a old working version of openwrt Oct 23 21:44:58 Hauke: hmm guess it seems as if it stopped working around the change from 2.6 to 3.0 Oct 23 21:48:23 kernel wise Oct 23 21:52:26 you probably have to add some printk into the code to see where it exactly fails Oct 23 23:05:48 after hours of debugging... aec62xx driver was missing lol Oct 23 23:05:53 *cough* Oct 24 00:09:22 RealOpty_Laptop: the cia service died Oct 24 00:10:00 swalker: sucks Oct 24 00:11:34 I enjoyed seeing changes in here when they were pushed to svn. Oct 24 00:12:00 * RealOpty_Laptop scripts new bot **** ENDING LOGGING AT Wed Oct 24 03:00:01 2012