**** BEGIN LOGGING AT Thu Jan 17 03:00:00 2013 Jan 17 06:36:05 build #152 of ramips is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/152 Jan 17 06:39:25 build #142 of rb532 is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/142 Jan 17 06:42:11 build #142 of ppc44x is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/142 Jan 17 08:30:00 cyrus r35187 trunk/package/network/config/netifd/Makefile Jan 17 08:30:00 netifd: @aliases use layer 3 devices instead of main devices Jan 17 08:30:00 Fixes dhcpv6 protocol alias Jan 17 08:30:05 cyrus r35188 trunk/package/network/services/ppp/ files/lib/netifd/ppp-up Makefile Jan 17 08:30:05 ppp: don't automatically set IPv6 default route Jan 17 08:30:05 * Fixes "ndisc_router_discovery() failed to add default route" Jan 17 08:30:09 cyrus r35189 trunk/package/network/ipv6/odhcp6c/Makefile Jan 17 08:30:09 odhcp6c: Detect a different MAC if interface has none Jan 17 08:30:12 * Fixes DHCPv6 behaviour over PPP and similar Jan 17 09:09:16 nbd r35190 trunk/package/kernel/modules/other.mk Jan 17 09:09:16 kernel: 8250.ko is called 8250_core.ko on linux 3.7+, fixes package/kernel build error in snapshot builds Jan 17 09:40:51 nbd r35191 trunk/target/linux/ramips/rt288x/config-3.7 * ramips: enable BR6425N in kernel config Jan 17 10:02:35 is there any git mirror of the feeds repository? Any developer that accepts "pull requests" or something like it? (asking because that seems a lot easier than the svn workflow) Jan 17 10:04:05 git://nbd.name/packages.git Jan 17 10:04:23 i'd still recommend using git-send-email instead of sending pull requests Jan 17 10:04:28 but you don't have to use svn to contribute Jan 17 10:08:24 nbd, that seems to only contain a "master" branch, I assume that points to trunk's feeds, is that correct? Jan 17 10:08:36 it points to the 'packages' feed Jan 17 10:09:45 nbd, (sorry if I am missing something obvious) I assume the packages feed is the same as svn://svn.openwrt.org/openwrt/packages, which I understand as the packages feed for trunk Jan 17 10:09:54 yes Jan 17 10:10:03 and my git repo is a mirror of that Jan 17 10:10:09 nbd, and that the packages feed for attitude adjustment would be svn://svn.openwrt.org/openwrt/branches/packages_12.09 Jan 17 10:10:28 git://nbd.name/packages_12.09.git Jan 17 10:10:34 nbd, a-ha ! Jan 17 10:11:17 nbd, thanks, that makes my life easier Jan 17 11:21:58 jow r35192 packages/net/ (7 files in 2 dirs) Jan 17 11:21:58 xtables-addons: update to v2.1, fix compilation against Linux 3.7.2, refresh patches Jan 17 11:34:31 russell-- thanks for the nginx fix, i tested 1.2.6 and its okay Jan 17 11:56:46 dape: np Jan 17 12:30:34 jow r35193 trunk/package/network/utils/xtables-addons trunk/package/network/utils/xtables-addons/Makefile packages/net/xtables-addons * xtables-addons: move to package/, add myself as maintainer Jan 17 12:59:25 Is there any plant to suppor this DLink DIR-657 (http://www.smallnetbuilder.com/wireless/wireless-reviews/31545-d-link-dir-657-hd-media-router-1000-reviewed)? Jan 17 12:59:54 It's based on a Ubicomip7160U CPU with 128 / 16 MB RAM / Flash. Jan 17 12:59:59 and a USB2 port. Jan 17 13:01:45 Currently (Today ONLY), 1SaleADay (http://1saleaday.com/main) is selling this router for $19.99 with S/H to a US Address. Jan 17 13:11:42 thats cheap Jan 17 13:12:52 Exactly. That's why I asked if it will be supported. Jan 17 13:13:13 I am thinking to place an order. Jan 17 13:14:00 you could donate one to a dev to work on Jan 17 13:14:21 I wish I had enough budget to do so. Jan 17 13:14:49 you lack $20? Jan 17 13:15:07 Yup. Jan 17 13:15:17 ic Jan 17 13:15:48 maybe you should let the mailing list and forum know about this deal Jan 17 13:16:02 a dev might buy one Jan 17 13:16:11 I thought so and just did it here. Jan 17 13:16:29 And, hope it will catch some devs to do so. Jan 17 13:17:05 build #151 of ppc40x is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/151 Jan 17 13:17:27 ok, great Jan 17 13:17:34 what platform is IP7160U Jan 17 13:18:11 AR9227 wifi, good Jan 17 13:18:19 I think this CPU does not have a MMU Jan 17 13:18:59 i thought most router cpus lacked mmu Jan 17 13:20:05 Is it bad not to have MMU? Jan 17 13:20:06 no most router cpus have a mmu Jan 17 13:20:56 oh ok Jan 17 13:22:21 you won't have much fun with ip7160 and openwrt Jan 17 13:22:22 build #132 of sibyte is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/132 Jan 17 13:26:26 No wonder it is on-sale for $20. Jan 17 13:27:56 <_trine> they sold dockstars for $20 once so its not always bad Jan 17 13:29:12 mazilo: the wr703n sells for $20 and it is extremely popular with openwrt people Jan 17 13:29:24 Thanks. Jan 17 13:29:33 np Jan 17 13:29:34 Do you have the link? Jan 17 13:29:45 where do you live Jan 17 13:29:52 ah usa Jan 17 13:29:57 ebay.com Jan 17 13:30:05 Lilburn, GA (about 3 Miles E.N.E of Atlanta). Jan 17 13:30:06 aliexpress.com too perhaps Jan 17 13:30:12 check dx.com even Jan 17 13:30:18 IC. Jan 17 13:30:55 AliExpress takes about 1 month to get the shipment. But, that's not bad because all shipments are registered mail. Jan 17 13:30:59 might be on amazon and newegg too Jan 17 13:31:16 sometimes there is an express shipping option Jan 17 13:31:31 But, express shipping costs more. Jan 17 13:31:42 yep Jan 17 13:32:40 amazon $30 Jan 17 13:32:46 I recently bought some XM-L U2 flashlight from AliExpress with free S/H and it took almost a moth to get the shipment from China. But, the flashlight was very inexpensive and very very bright. Jan 17 13:32:50 http://www.amazon.com/TP-LINK-TL-WR703N-Portable-802-11n-Wireless/dp/B0083Z54P0 Jan 17 13:32:58 Thanks. Jan 17 13:35:28 there are a few similar models from tp-link, avoid them Jan 17 13:35:36 they wont work with openwrt Jan 17 13:37:35 IIRC and I could be wrong, DailySteal had this WR703N for as little as $18 with free S/H to a US address back in 12/12. Jan 17 13:37:49 nice Jan 17 13:37:54 .com? Jan 17 13:38:05 $25.70 https://dx.com/s/wr703n Jan 17 13:38:52 The reason I did not buy that was because I already spent my $$ on some Seagate GoFLEX NET for $9.99/each bought from some Fry's Electronics stores. Jan 17 13:39:16 is that like the dockstar? Jan 17 13:39:47 http://archlinuxarm.org/platforms/armv5/seagate-goflex-net Jan 17 13:40:05 Similar to dockstar, except it supports SATA. Jan 17 13:40:10 ah nice Jan 17 13:40:27 fry's was clearing old stock? Jan 17 13:40:32 Yes. Jan 17 13:43:29 arch runs on arm? Jan 17 13:43:56 I believe so. Jan 17 13:44:02 i see Jan 17 13:44:17 wikipedia and distrowatch dont mention it Jan 17 13:44:22 Arch Linux ARM is a distribution of Linux for ARM computers Jan 17 13:45:41 eh, i should've done ctrl f Jan 17 13:55:22 juhosg r35194 trunk/target/linux/ generic/patches-3.6/800-usb-ohci-multiple-platform-driver-fix.patch generic/patches-3.3/800-usb-ohci-multiple-platform-driver-fix.patch generic/patches-3.6/801-usb-ehci-multiple-platform-driver-fix.patch generic/patches-3.3/801-usb-ehci-multiple-platform-driver-fix.patch * generic: add EHCI|OHCI platform driver fix to Jan 17 13:55:22 OpenWrt3.[36] Jan 17 14:13:22 orly_owl people that like hacking should buy mr3020 instead of wr703n , easier to solder serial Jan 17 14:14:38 maybe, 703n is cheaper though Jan 17 14:15:07 yeah, its very very cheap but the internals are TINY Jan 17 14:15:41 dad manage to solder me a serial but he had to put a plastic bridge to fix the stereo sockets and was really painful for his eyes and hands Jan 17 14:16:02 luka r35195 branches/attitude_adjustment/package/uci/Makefile * uci: sync with trunk Jan 17 14:16:56 sounds like you need to learn to solder Jan 17 14:23:29 no, i'm no near as good as dad, he's a electronic dude Jan 17 14:24:33 electronics would would be a good background Jan 17 14:24:48 basically its working like this: "hey dad, want a pizza and two beers? here's a schematic, two wires and a router, i'll open it up for you and point the targets" :P Jan 17 14:25:54 the hard part is to convince him the rx goes to tx and viceversa, he just can‘t grasp it Jan 17 15:00:50 build #154 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/154 Jan 17 15:18:19 hcg r35196 packages/lang/python/Makefile * [packages] python: Enable threading in python Jan 17 15:21:27 hcg r35197 packages/lang/perl/perlbase.mk * [packages] perl: COrrect installation of prove binary for test hasrness Jan 17 15:26:09 jow r35198 packages/net/netatalk/Makefile Jan 17 15:26:09 netatalk: only disable shadow password support if it is disabled globally (#12819) Jan 17 15:28:11 jow r35199 branches/packages_12.09/net/netatalk/Makefile * AA: netatalk: merge r35198 Jan 17 15:47:34 jow r35200 trunk/target/linux/x86/image/Makefile Jan 17 15:47:34 x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821) Jan 17 15:51:14 dape: its like jump starting a car Jan 17 15:52:50 jow r35201 packages/net/nginx/Makefile * fix nginx build Jan 17 15:52:51 jow r35202 packages/sound/sox/Makefile * fix sox build Jan 17 16:06:38 jow r35203 trunk/package/network/utils/xtables-addons/patches/400-uid-gid-linux-3.7-compat.patch Jan 17 16:06:38 xtables-addons: rework uid/gid compat patch to use KUIDT_INIT() and KGIDT_INIT() macros Jan 17 16:17:09 cyrus r35204 trunk/package/ base-files/files/etc/uci-defaults/network-generate-ula base-files/files/etc/uci-defaults/generate-ula base-files/Makefile * base-files: rename ULA generation script Jan 17 16:17:14 cyrus r35205 trunk/package/network/ipv6/ipv6-support/ Makefile files/network-enable-ipv6.defaults files/enable-ipv6.defaults * ipv6-support: Rename enable-ipv6 UCI defaults Jan 17 17:23:01 just running kernel 3.7.0-rc8, from slightly old trunk (r34726) and Buffers: 0 kB in /proc/meminfo. anyone? Jan 17 17:58:01 caog_ : that's in bytes, so it's times 8 ... just kidding, no ideas here Jan 17 19:50:35 build #118 of iop32x is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/118 Jan 17 22:29:41 florian r35206 trunk/target/linux/ mvebu/profiles mvebu/profiles/100-Generic.mk * mvebu: add default profile Jan 17 22:29:45 florian r35207 trunk/target/linux/mvebu/config-default * mvebu: enable /proc/devicetree usage Jan 17 22:29:56 florian r35208 trunk/target/linux/ (5 files in 4 dirs) * mvebu: add board detection scripts Jan 17 22:30:01 florian r35209 trunk/target/linux/ (11 files) * kernel: refresh 3.8 patches Jan 17 22:30:05 florian r35210 trunk/target/linux/ (21 files) * mvebu: refresh patches Jan 17 22:30:20 florian r35211 trunk/target/linux/ (16 files in 2 dirs) * mvebu: add preliminary support for PCI express Jan 17 22:30:25 florian r35212 trunk/target/linux/mvebu/patches-3.8/043-arm_mvebu_enable_usb_a370_rd.patch * mvebu: enable USB on Armada 370 Reference Design Jan 17 22:30:29 florian r35213 trunk/target/linux/mvebu/patches-3.8/044-arm_mvebu_add_pcie_dt_a370_rd.patch * mvebu: enable PCIe on Marvell Armada 370 Reference Design Jan 17 22:30:34 florian r35214 trunk/target/linux/mvebu/config-default * mvebu: enable PCI in kernel configuration Jan 17 22:37:31 Prerequisite check failed. Use FORCE=1 to override. Jan 17 22:37:31 make: *** [tmp/.prereq-build] Error 1 Jan 17 22:37:59 i just upgraded my git and am compiling attitude without issues. this happens with backfire Jan 17 22:38:09 fresh svn fetched Jan 17 22:59:40 russell-- maybe you can bump nginx version to 1.2.6 to developers please? Jan 18 01:27:53 hmm, weird Jan 18 01:28:22 wifi doesn‘t start on tp-link wr703n neither, even if its option disable 0 Jan 18 01:28:40 running manually wifi after boot would bring it up and joined to br-lan without problems Jan 18 02:17:15 anyway Jan 18 02:17:50 i am struggling since some hours with mjpg-streamer and this old creative cam, terrible artefacts and not always runs okay Jan 18 02:18:16 i changed mjpg-streamer‘s Makefile for libjpeg-turbo instead of libjpeg and it runs AWESOME now **** ENDING LOGGING AT Fri Jan 18 02:59:59 2013