**** BEGIN LOGGING AT Sun Apr 07 02:59:58 2013 Apr 07 04:05:11 build #229 of ramips is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/229 Apr 07 04:09:19 build #214 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/214 Apr 07 04:13:32 build #214 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/214 Apr 07 05:41:36 build #204 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/204 Apr 07 06:42:31 build #209 of xburst is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/209 Apr 07 08:19:55 juhosg r36237 trunk/target/linux/ (58 files) * ramips: remove top-level {address,size}-cells properties from .dts files Apr 07 08:57:23 morning all, has anyone looked at a port to the Asus RT-N65U? I now have one of these devices and was wondering if there is prior work I can build on. Apr 07 08:58:50 malbon: its broken atm as we are updating the kernel Apr 07 08:58:52 ;) Apr 07 08:59:02 this is the rt3883 board right ? Apr 07 08:59:51 yes, with the USB3 Apr 07 09:00:06 ok Apr 07 09:00:12 you need to wait 1 week Apr 07 09:00:23 i got a test unit on friday and have not had time to open it yet Apr 07 09:00:27 sure, I'll track the commit log :) Apr 07 09:00:36 but right now the support is slightly broken Apr 07 09:01:24 cool, if there is an area I can help out with let me know. I have a bit of free time now, and I'd like to contribute again. Apr 07 09:01:50 ok Apr 07 09:02:10 basically we changed the kernel and moved the target to device tree and are now clening up the breakage ;) Apr 07 09:03:52 sounds like fun, I'll go a clone later today and start looking at it. Apr 07 09:09:48 build #231 of ppc40x is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/231 Apr 07 09:21:46 build #199 of ar71xx is complete: Failure [failed compile_9] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/199 Apr 07 09:26:52 obsy r36238 packages/net/vsftpd/Makefile * [packages] vsftpd: add TLS variant Apr 07 10:12:22 nbd r36239 trunk/toolchain/uClibc/patches-0.9.33.2/980-mips64_fixes.patch * uClibc: unbreak ld-uClibc on non-64bit platforms Apr 07 10:12:25 nbd r36240 trunk/toolchain/ gcc/Config.in gcc/final/Makefile Apr 07 10:12:25 gcc: remove the bogus CONFIG_TLS_SUPPORT symbol - TLS support is required by libc. Apr 07 11:25:14 nbd r36241 trunk/target/linux/ cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c cns3xxx/patches-3.8/025-smp_support.patch Apr 07 11:25:14 cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing Apr 07 11:38:00 juhosg r36242 trunk/target/linux/ ramips/patches-3.8/0210-mtd_fix_cfi_cmdset_0002_erase_status_check.patch ramips/patches-3.8/0211-mtd-cfi_cmdset_0002-force-word-write.patch * ramips: add cfi_cmdset_0002 patches Apr 07 11:41:15 build #183 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/183 Apr 07 11:43:32 Hauke: https://personaltelco.net/~russell/wgt634u-r36235-oom-crash.log Apr 07 11:47:38 blogic r36243 trunk/target/linux/ (5 files) * [ramips] fix default commandline in dts files Apr 07 11:47:47 blogic r36244 trunk/target/linux/ ramips/dts/F5D8235_V2.dts ramips/dts/WL-351.dts * [ramips] fix typos inside dts files Apr 07 11:56:40 this looks like a memory leak somewhere in the kernel Apr 07 11:57:17 russell--: how long does it take till this error message is shown? Apr 07 11:57:47 could you disable some of your services and see which is causing this issue Apr 07 11:57:58 the syslogs show seconds since boot, i think Apr 07 11:58:48 yeah, ~300 seconds = ~5 minutes Apr 07 11:58:57 I will eat something and will try to reproduce this issue on my devices then Apr 07 11:59:58 Hauke: do you have a wgt634u? Apr 07 12:01:15 * russell-- had to remove kmod-ocf-ubsec-ssb from target/linux/brcm47xx/profiles/WGT634U.mk Apr 07 12:01:19 for 3.8 Apr 07 12:09:13 * russell-- is going to sleep now, laters Apr 07 12:15:49 build #201 of au1000 is complete: Failure [failed compile_9] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/201 Apr 07 13:14:12 KanjiMonster: what is needed to activate SMP/CMT on bcm6358? Apr 07 13:14:54 I already compiled with bcm4350 cpu but I don't notice any difference Apr 07 13:26:22 juhosg r36245 trunk/target/linux/ramips/patches-3.8/0122-MIPS-ralink-handle-PCI-interrupts-as-well.patch * ramips: handle PCI interrupts in plat_irq_dispatch Apr 07 13:33:21 juhosg r36246 trunk/target/linux/ (7 files) * ramips: remove trailing whitespaces from dts files Apr 07 13:35:33 danitool: you need to initialize the second cpu; also the irq code code currently only enables irqs on the first cpu, so only userspace can use the second core, all interrupt handlers will use the first one Apr 07 14:02:51 danitool: if it were just enabling some options I would have done it already ;) Apr 07 14:04:01 some options? Apr 07 14:18:39 ok, you mean it's a complicated task Apr 07 14:27:21 danitool: sotfware or hardware irqs? Apr 07 14:27:52 none of them? Apr 07 14:27:55 :| Apr 07 14:46:53 juhosg r36247 trunk/target/linux/ (5 files) * ramips: pinmux fixes Apr 07 14:46:54 juhosg r36248 trunk/target/linux/ramips/dts/RTN56U.dts * ramips: fix pinmux settings for the RT-N56U Apr 07 14:46:55 juhosg r36249 trunk/target/linux/ramips/dts/RTN56U.dts * ramips: add nor-flash node for the RT-N56U Apr 07 15:26:37 updated openwrt/upstream, https://home.comcast.net/~sdwalker/uscan/index.html Apr 07 15:53:50 juhosg r36250 trunk/target/linux/ (11 files in 2 dirs) * x86: add support for 3.8 Apr 07 15:53:52 juhosg r36251 trunk/target/linux/x86/alix2/config-3.8 * x86/alix2: add config for 3.8 Apr 07 15:53:54 juhosg r36252 trunk/target/linux/x86/alix2/target.mk * x86/alix2: switch to 3.8 Apr 07 15:53:55 juhosg r36253 trunk/target/linux/ x86/alix2/config-3.7 x86/alix2/config-3.3 * x86/alix2: remove old kernel configs Apr 07 15:53:58 juhosg r36254 trunk/target/linux/x86/generic/config-3.8 * x86/generic: add config for 3.8 Apr 07 15:53:59 juhosg r36255 trunk/target/linux/x86/generic/target.mk * x86/generic: switch to 3.8 Apr 07 15:54:01 juhosg r36256 trunk/target/linux/ x86/generic/config-3.3 x86/generic/config-3.7 * x86/generic: remove old kernel configs Apr 07 16:06:40 so I have a ubiquity nanostation, and having a minor problem with it Apr 07 16:06:54 can log in and reboot it all day long with ubnt firmare on it Apr 07 16:07:06 but, flash with openwrt, and, it doesn't always reboot cleanly Apr 07 16:07:20 I type reboot, it goes thru the process, then hangs in uboot, needing a power cycle Apr 07 16:07:39 so, I'm thinking uboot is busted on this one, and not correctly handling the hardware state at reboot Apr 07 16:08:04 but, I'm wondering where to start looking, to see the difference between ubnt firmware, and openwrt, for hardware state at the point of reboot Apr 07 16:08:27 I'd like this thing to reboot reliably, without having to head on down the field, and pull it's power plug Apr 07 16:08:35 where does it hang in uboot? did you check with a serial console? Apr 07 16:08:56 yes, it hangs after the memory check, I think it's checking flash at that point Apr 07 16:09:02 but cannot be 100% sure Apr 07 16:09:11 what kind of nanostation is it? Apr 07 16:09:16 m5 Apr 07 16:09:22 have the same issue with a picostation Apr 07 16:09:28 hm, i've never seen something like this with those devices Apr 07 16:09:36 both are brand new, with very recent date codes Apr 07 16:09:46 yah, this is puzzling, but Apr 07 16:09:53 they are otherwise nice devices for outdoor Apr 07 16:09:59 yeah Apr 07 16:10:03 I really like the form factor of the picostation Apr 07 16:10:29 but without a jtag setup, I'm leery of trying to fix uboot on them Apr 07 16:10:56 oh, and fyi nbd Apr 07 16:11:05 your comments a few weeks ago, about building on mac Apr 07 16:11:12 life changing event around here :) Apr 07 16:11:15 :) Apr 07 16:11:29 I bought the older model used, just to verify it all Apr 07 16:11:40 paid about the same as an equivalent monitor Apr 07 16:11:51 sometime next week, it'll be put in 'target display' mode, and stay there forever Apr 07 16:12:01 as second monitor for the new i7 unit I intend to purchase Apr 07 16:12:14 ;) Apr 07 16:12:27 andI must admit, I'm really impressed with this setup Apr 07 16:12:41 way more than I expected to be, and my wife is in constant 'I told you so' mode Apr 07 16:12:52 she's had the 27 inch imac for a year and a half now Apr 07 16:13:54 my first guess on tracking down this reboot problem, since openwrt used the flash completely differently than ubnt firmware Apr 07 16:14:08 flash chips being left in a stat different than uboot is prepared for Apr 07 16:14:37 not really sure where else to start looking Apr 07 16:15:14 what happens if you run reboot -f while the system is idle? Apr 07 16:15:32 (just to see if it's maybe a race condition related to flash access) Apr 07 16:15:37 hmm, I will have to check that Apr 07 16:15:58 it'll be an hour or two before I can do that, units not on my desk Apr 07 16:16:10 but, going to change that in a while, bring the problem ones in here Apr 07 16:16:41 it's currently in 'needs to be power cycled' mode, and unreachable till I get dressed and head outside Apr 07 16:16:46 ok Apr 07 16:17:09 I should try all the variants, -f -n and -d Apr 07 16:17:16 just -f Apr 07 16:17:24 as it's immediate without going through init Apr 07 16:17:43 I was looking at the other differences between ubnt build and ours Apr 07 16:17:52 they are still using madwifi in their firmware Apr 07 16:18:38 it's not madwifi Apr 07 16:18:54 it's the atheros reference driver Apr 07 16:18:58 it is a bunch of binary blobs, with same filenames Apr 07 16:19:03 ahh Apr 07 16:25:18 juhosg r36257 trunk/target/linux/ramips/dts/RTN56U.dts * ramips: fix polarity of GPIO buttons for RT-N56U Apr 07 16:27:11 juhosg r36258 trunk/target/linux/ ramips/patches-3.8/0405-MIPS-ralink-add-GPIO-mode-to-RT3883-UART-pinmux-grou.patch ramips/patches-3.8/0127-MIPS-ralink-add-GPIO-mode-to-RT3883-UART-pinmux-grou.patch * ramips: fix broken patch name Apr 07 16:45:12 build #166 of octeon is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/166 Apr 07 17:05:48 juhosg r36259 trunk/target/linux/ ramips/patches-3.8/0130-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3662-3.patch ramips/patches-3.8/0129-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3x5x-R.patch ramips/patches-3.8/0128-MIPS-ralink-add-cpu-feature-overrides.h-for-RT288x-S.patch * ramips: add missing cpu-feature-override.h files Apr 07 17:05:50 juhosg r36260 trunk/target/linux/ ramips/patches-3.8/0210-mtd_fix_cfi_cmdset_0002_erase_status_check.patch ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch ramips/patches-3.8/0211-mtd-cfi_cmdset_0002-force-word-write.patch * ramips: refresh patches Apr 07 17:36:19 ok, so I got that unit in, and fussing with reboots Apr 07 17:36:24 reboot -f, same result Apr 07 17:36:35 uboot gets as far as printing ram, then just hangs Apr 07 17:37:07 on a clean boot, the next print is the flash size Apr 07 19:05:37 build #179 of gemini is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/179 Apr 07 19:20:58 Hauke: any ideas? Apr 07 19:21:25 russell--: no I had to other things Apr 07 19:31:37 Hauke: /me suspects a memory leak, possibly in the kernel since it doesn't seem visible in userspace (ie running top) Apr 07 20:57:03 juhosg r36261 trunk/target/linux/ramips/patches-3.8/0131-MIPS-pci-rt3883-rewrite.patch * ramips: fix RT3883 PCI driver Apr 07 20:57:04 juhosg r36262 trunk/target/linux/ramips/rt3883/config-3.8 * ramips: rt3883: enable PCI support Apr 07 20:57:05 juhosg r36263 trunk/target/linux/ramips/dts/rt3883.dtsi * ramips: add PCI node for rt3883.dtsi Apr 07 20:57:07 juhosg r36264 trunk/target/linux/ramips/dts/RTN56U.dts * ramips: add PCI node into RTN56U.dts Apr 07 21:10:40 russell--: I also assume that, but I do not know of any brcm47xx specific code that changed that could cause this Apr 07 21:10:55 there is a kernel memory leak detector Apr 07 21:30:13 build #202 of au1000 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/202 Apr 07 21:42:15 build #186 of ep93xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/186 Apr 07 21:44:46 A little problem in two or more (not sure) lantiq boards: pci and usb don't work. Seems to be something with the EBU, but i'm not sure. Apr 07 21:44:47 https://dev.openwrt.org/ticket/13320 Apr 07 21:45:29 If i can help tell me Apr 07 21:47:04 the issue happens with kernel version 3.8.3; with 3.7.10 all works fine Apr 07 22:06:21 nbd r36265 trunk/package/mac80211/ (21 files) Apr 07 22:06:21 mac80211: merge an idle handling fix (fixes ath9k_htc client mode), refresh patches Apr 07 22:06:25 nbd r36266 trunk/package/mac80211/patches/300-pending_work.patch * ath9k_htc: accept firmware versions newer than 1.3 Apr 07 22:06:30 nbd r36267 trunk/package/mac80211/patches/300-pending_work.patch * ath9k: fix a tx processing race condition on AR9300+ Apr 07 22:39:18 ping jow_laptop please, i'm trying to modify ddns-scripts for ipv6 custom url, i am not sure why network_get_ipaddr6 does not return a proper answer Apr 07 22:40:15 seems like it work on wan because there's LL but on br-lan there are multiple global /64's and returns nothing when used like "network_get_ipaddr6 current_ip6 lan" in a script Apr 07 22:41:35 same for network_get_subnet6 current_ip6 lan i think Apr 07 23:31:41 build #241 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/241 Apr 08 02:51:46 build #1 of mpc85xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/mpc85xx/builds/1 Apr 08 02:59:30 build #215 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/215 **** ENDING LOGGING AT Mon Apr 08 02:59:58 2013