**** BEGIN LOGGING AT Sat May 11 02:59:58 2013 May 11 03:10:10 build #233 of ar71xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/233 May 11 04:52:14 build #218 of ep93xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/218 May 11 10:32:11 build #210 of gemini is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/210 May 11 11:59:11 okay i built the bootloader. the trick was to use a >= gcc 3.4 May 11 11:59:55 i pulled the knoppix livecd and built the bootloader. now i got u-boot and bootloader (uboot + brnboot) can i flash w/o brnboot? May 11 12:00:03 or i must have brnboot? May 11 12:02:12 i am not willing to use wifi, so do i need the atheros calibration? May 11 12:30:09 just use this modem for adsl, dgn1000. which bootloader do i need to put? 119K u-boot.bin or 120K dgn1000_bin/bootloader.bin May 11 12:47:38 build #28 of mpc85xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/mpc85xx/builds/28 May 11 14:37:32 build #190 of octeon is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/190 May 11 16:30:02 <__trine> has FreeSwitch been removed from openwrt for some reason? May 11 16:32:36 <__trine> will someone take a look at why FreeSwitch isnt showing in make menuconfig anymore May 11 16:44:06 edit your feeds.conf May 11 18:55:10 build #221 of adm5120 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/221 **** BEGIN LOGGING AT Sat May 11 19:04:45 2013 May 11 19:15:03 <__trine> swalker, it's not that May 11 19:15:20 <__trine> menuconfig is broken May 11 19:15:58 <__trine> FreeSwitch does not show up even after a distclean May 11 19:16:50 __trine, build from scratch! May 11 19:17:11 <__trine> I can see it's actually all there in the files but there is no FreeSwitch showing in menuconfig May 11 19:18:00 <__trine> quackquack1, which part of me do I scratch I have already tried my head May 11 19:18:24 * __trine sitting here scractching his head wondering why May 11 19:18:28 freeswitch part. May 11 19:18:44 i think freeswitch wiki got a whole page for openwrt. May 11 19:22:04 <__trine> I think I will take another pill May 11 19:22:56 <__trine> old age is a terrible disease May 11 19:23:46 <__trine> Hey quackquack1 I have lots of hacking on my website from India May 11 19:24:01 <__trine> I'm gonna have to ban you all May 11 19:24:09 what did i do? May 11 19:24:11 :-s May 11 19:24:22 secure your ssh! :-D May 11 19:24:51 <__trine> website not router May 11 19:25:14 hmmmmmm May 11 19:28:50 <__trine> if you want some interesting physics lectures look here http://streamer2.perimeterinstitute.ca/f4v-med/ May 11 19:32:30 laser? May 11 19:34:34 <__trine> http://streamer2.perimeterinstitute.ca/f4v-med/13020119.f4v thats the one I am watching now May 11 19:44:33 hmmmm May 11 20:39:17 build #204 of mpc52xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/204 May 11 20:43:50 nbd r36603 trunk/package/ubus/Makefile May 11 20:43:50 ubus: update to the latest version, fixes a rare deadlock with multiple synchronous invoke/notify calls May 11 20:47:56 <__trine> nbd do you know whats wrong with menuconfig May 11 20:48:13 <__trine> its happened since FreeSwitch went over to git May 11 21:06:15 __trine: this has nothing to do with freeswitch going to git, but rather freeswitch depends on a config symbol that was recently removed May 11 21:06:53 <__trine> I only know it happened at more or less the same time May 11 21:07:19 <__trine> the thing is,, who is going to fix it May 11 21:08:15 <__trine> and who removed the config symbol May 11 21:11:59 I'm currently investigating why it still depends on it May 11 21:13:03 <__trine> ok thanks May 11 21:13:40 __trine: ah, not it doesn't. works fine for me; try deleting your tmp May 11 21:14:14 <__trine> I already did that a couple of days ago May 11 21:14:25 <__trine> I will try it again though May 11 21:14:42 <__trine> today I tried a distclean May 11 21:14:53 <__trine> and it was still missing FS May 11 21:17:27 it shows for me May 11 21:18:36 <__trine> I just deleted the tmp folder and FS is still missing May 11 21:19:09 <__trine> the strange thing is that all the files show when I check for them using / in menuconfig May 11 21:19:27 <__trine> but FS isnt showing in menuconfig May 11 21:20:44 <__trine> and this is a distclean May 11 21:20:44 if you are on an older checkout you need to enable to install stdlibc++ May 11 21:21:21 <__trine> everything else seems to be there except FS **** BEGIN LOGGING AT Sat May 11 21:26:03 2013 May 11 21:26:21 <__trine> I will delete the lot tomorrow May 11 21:26:28 <__trine> and download afresh May 11 21:26:46 <__trine> I will keep you informed May 11 21:34:17 <__trine> KanjiMonster, I tried on one of my other folders which has a different CO and FS is missing on that as well May 11 21:34:50 <__trine> this folder is for my wndr3700 and the other was for kirkwood May 11 21:35:02 <__trine> so FS is missing on both of them May 11 21:35:23 it's working for me on current trunk, so I have no idea what's wrong with it May 11 21:39:26 <__trine> well it's looking like a new CO wont solve this but I will try in any case May 11 21:59:00 Hi, are there any dos and don'ts regarding the inclusion of other shell scripts? e.g. i have a .hotplug file which needs to include a script in the netifd/proto directory. is that okay? May 11 21:59:33 why does it need to do that May 11 21:59:34 ? May 11 22:00:03 it needs some functions which are also used by the proto script itself. May 11 22:01:33 thesiman: the dhcp script or ppp ip-up/ip-down also include netifd proto scripts May 11 22:01:57 so you can probably do it May 11 22:02:12 but what kind of functionality do you use in your hotplug handler from those scripts? May 11 22:03:27 to be concrete: i'm porting the tayga scripts to netifd, and they use two helper functions in order to retrieve the wan and wan6 dev and ip resp. May 11 22:04:00 ah, ok May 11 22:04:37 and i don't want to throw out the checks which were added in the last commit. May 11 22:06:19 because i could not find a counterexample: is it okay to remove the check for if CONFIG_PACKAGE_netifd is set in the makefile or does a netifd compatible package need to be backwards compatible? May 11 22:11:16 no need to check for netifd May 11 22:11:20 it's required anyway May 11 22:11:36 kk. thx a lot. May 11 22:14:37 which one to flash? u-boot.bin or bootloader.bin? May 11 22:16:44 blogic, you there? May 11 22:23:51 http://dev.wlan-si.net/wiki/Routers/TP-LINK/FlashMemory i understood the logic. May 11 22:24:01 i finished recreating the bootloader May 11 22:24:13 bootloader which is uboot + brnboot May 11 22:24:22 and also i have the u-boot pristine. May 11 22:24:26 which one to flash? **** BEGIN LOGGING AT Sat May 11 22:32:26 2013 **** BEGIN LOGGING AT Sat May 11 22:39:19 2013 May 11 22:41:38 good night everyone. May 12 01:14:01 jow r36604 trunk/package/network/utils/iwinfo/ src/iwinfo_nl80211.c Makefile May 12 01:14:02 iwinfo: only consider joined bss when finding current operating frequency, fixes spurious misreporting of frequencies in ad-hoc mode **** ENDING LOGGING AT Sun May 12 02:59:59 2013