**** BEGIN LOGGING AT Mon Jun 24 02:59:58 2013 Jun 24 03:59:30 build #267 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/267 Jun 24 05:49:45 cyrus r37020 trunk/package/network/utils/arptables/Makefile * arptables: Bump to 0.0.4 Jun 24 07:29:42 build #206 of octeon is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/206 Jun 24 11:11:24 blogic r37021 trunk/target/linux/ramips/dts/ (6 files) * ramips: revert gpio regulator dts update Jun 24 12:01:59 jow r37022 packages/net/wget/Makefile * wget: forcefully disable libuuid (#13746) Jun 24 12:06:18 cyrus r37023 branches/attitude_adjustment/feeds.conf.default * Switch LuCI to 0.11 branch Jun 24 12:08:29 blogic r37024 trunk/target/linux/ramips/ rt3883/config-3.9 patches-3.9/0160-USB-phy-add-ralink-SoC-driver.patch * ramips: make rt3883 usb work properly Jun 24 12:27:15 mirko r37025 packages/libs/ (9 files in 8 dirs) * [packages/] remove packages which got moved to the telephony feed Jun 24 12:40:03 cyrus r37026 trunk/package/system/ubus/files * ubus: remove unused init-script Jun 24 12:41:00 blogic r37027 trunk/target/linux/ramips/ base-files/lib/preinit/07_set_preinit_iface_ramips base-files/etc/uci-defaults/02_network * ramips: move ESW reset to preinit on RT305x/RT5350 Jun 24 14:52:49 mirko r37028 branches/attitude_adjustment/ (7 files in 3 dirs) * [toolchain/eglibc] AA: version 2.14 - rename patches folder to 2.14.1 (was 2.14) Jun 24 14:52:54 mirko r37029 trunk/toolchain/eglibc/patches/2.15/050-all_glibc-2.14-leak-revert-crash.patch * [toolchain/eglibc] add patch for eglibc version 2.15 Jun 24 14:54:26 mirko r37030 branches/attitude_adjustment/ toolchain/eglibc/patches/2.14.1/050-all_glibc-2.14-leak-revert-crash.patch toolchain/eglibc/patches/2.15/050-all_glibc-2.14-leak-revert-crash.patch * AA: eglibc: backport 37029 Jun 24 15:38:45 [florian] good afternoon, do you happen to have a few minutes? Jun 24 16:03:22 build #316 of brcm63xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/316 Jun 24 16:45:51 blogic r37031 trunk/package/network/services/hostapd/Makefile * hostapd: fix superflous coma Jun 24 20:16:28 build #274 of ar7 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/274 Jun 24 20:37:27 jogo r37032 trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network * bcm63xx: fix DSL-274xB F1 default network config Jun 24 20:51:08 hello, is something broken in latest trunk with procd? it does not finish stuff on my tp-link wr740n v2.3 after boot Jun 24 20:51:36 after press the f key for failsafe bla bla it says: "sh: write error: Invalid argument" Jun 24 20:51:55 and it drops me to root@(none):/# Jun 24 20:55:08 dape: that's normal for failsafe Jun 24 20:55:17 i didnt press f Jun 24 20:55:26 ah, wait, I thought you pressed it Jun 24 20:55:31 i just have serial console, flashed trunk and BOOM Jun 24 20:55:34 is this a selfbuild one or a snapshot? Jun 24 20:55:49 selfbuilt, just added luci and components Jun 24 20:56:13 build #291 of ramips is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/291 Jun 24 20:56:13 did you do a make defconfig/oldconfig after the last git pull/svn update? Jun 24 20:56:37 i don't think so Jun 24 20:56:57 then you are probably missing some new dependencies or so Jun 24 20:56:57 just svn update, feeds update and install and make menuconfig again to check stuff Jun 24 20:57:05 menuconfig should have selected them Jun 24 20:57:13 (or deselected them) Jun 24 20:57:18 did a make clean and make Jun 24 20:57:26 in doubt, try with a fresh config Jun 24 20:57:52 maybe some default changed which didn't get properly selected on update Jun 24 20:57:57 ok, now.. mount_root says "mount_root: jffs2 is not ready - marker found" Jun 24 20:58:35 anything i can do on the prompt or should i go with tftp image flash? Jun 24 20:59:23 wget and mtd should be available, so you should be able to flash from failsafe Jun 24 20:59:50 you are right, thanks Jun 24 21:30:51 KanjiMonster same stuff, still broken Jun 24 22:06:00 hi Jun 24 22:06:17 build #271 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/271 Jun 24 22:11:36 does someone know where i can find the ubiquiti sources? Jun 24 22:13:20 build #271 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/271 Jun 24 22:14:03 because they don't provide a gpl arviche for every device Jun 24 22:14:36 i need it for the ubiquiti UniFi AP Jun 24 23:10:31 build #261 of xburst is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/261 Jun 24 23:54:31 build #301 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/301 Jun 25 00:03:46 what do you need from the unifi tripolar ? **** ENDING LOGGING AT Tue Jun 25 02:59:58 2013