**** BEGIN LOGGING AT Thu Jul 04 02:59:59 2013 Jul 04 03:20:23 build #52 of mpc85xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/mpc85xx/builds/52 Jul 04 03:22:30 build #239 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/239 Jul 04 04:59:15 build #327 of brcm63xx is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/327 Jul 04 06:19:57 build #53 of mpc85xx is complete: Failure [failed svn compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc85xx/builds/53 Jul 04 08:07:58 cyrusff, pretty please https://dev.openwrt.org/ticket/13812 , would be very cool Jul 04 08:30:10 dape: you could simply add some calls like "logger $ADDRESSES" to /lib/netifd/dhcpv6.script to the setup_interface function Jul 04 08:31:40 awesome tip, thanks Jul 04 08:59:07 <[florian]> The_Lizard: sorry, went early to bed yesterday Jul 04 11:09:50 where can I find valid values for ralink,led-polarity? router ports blinks fine, but it's lit even without cable Jul 04 11:09:58 another thing is, is wireless mac supposed to be on soc_wmac.eeprom? Jul 04 11:19:39 1) its a board setting, if oyu have rt5350 you will want to set it to 0x1f Jul 04 11:19:42 2) yes Jul 04 12:50:32 luka r37155 trunk/target/linux/ar71xx/image/Makefile * ar71xx: $(KDIR_TMP) must be present before starting initramfs build Jul 04 13:32:20 blogic r37156 trunk/package/system/ubox/Makefile * ubox: dont install lsbloader and symlink lsmod Jul 04 13:32:34 blogic r37157 trunk/package/system/procd/files/procd.sh * procd: extend shell binding with trigger support Jul 04 13:32:38 blogic r37158 trunk/package/system/procd/Makefile * procd: bump to latest git revision Jul 04 13:32:43 blogic r37159 trunk/package/libs/libubox/Makefile * libubox: update to latest git revision Jul 04 13:32:47 blogic r37160 trunk/package/kernel/button-hotplug/src/button-hotplug.c * button-hotplug: Add KEY_POWER handling Jul 04 13:32:52 blogic r37161 trunk/target/linux/brcm47xx/modules.mk * brcm47xx: fix module insert order Jul 04 13:32:56 blogic r37162 trunk/package/kernel/mac80211/Makefile * mac80211: make rt2x00_soc depend on !rt3883 Jul 04 13:33:01 blogic r37163 trunk/target/linux/ramips/dts/RT-N13U.dts * ramips: fix RT-N13U gpio buttons Jul 04 13:33:07 blogic r37164 trunk/package/kernel/linux/modules/other.mk * kernel: fix 8250 ko name for 3.9 Jul 04 13:33:11 blogic r37165 trunk/package/utils/px5g/src/px5g.c * px5g: creates certificates that expire in the past Jul 04 13:41:08 blogic for some reason, wireless mac is dummy, but it detects chipset fine, what else can I do? Jul 04 13:43:29 jogo r37166 trunk/include/target.mk * include: also check CONFIG_GPIOLIB for GPIO_SUPPORT Jul 04 13:47:08 luka r37167 trunk/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch * ar71xx: Buffalo WZR-HP-AG300H (600DHP) enable PCI Jul 04 13:58:36 build #240 of mcs814x is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/240 Jul 04 14:31:32 build #242 of ep93xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/242 Jul 04 14:42:15 blogic: you commited https://dev.openwrt.org/changeset/37158 but you didnt push it to the nbd.name git repo Jul 04 14:42:34 fatal: reference is not a tree: 3283d681f9da65b500ad0cb3d4550cb840ed481a Jul 04 14:43:06 or was there no new revision at all? Jul 04 15:00:00 build #233 of gemini is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/233 Jul 04 15:00:40 tripolar: done Jul 04 16:05:59 could someone review the wiki section about kernel patches, it's getting confused - http://wiki.openwrt.org/doc/devel/patches#adding.or.editing.kernel.patches Jul 04 16:46:31 build #244 of adm5120 is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/244 Jul 04 16:58:42 jow r37168 trunk/package/network/services/lldpd/Makefile * lldpd: upgrade to 0.7.5 Jul 04 17:00:01 wigyori r37169 trunk/target/linux/generic/config-3.10 * kernel/generic: add missing regulator symbols for 3.10 Jul 04 17:30:46 build #328 of brcm63xx is complete: Failure [failed svn compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/328 Jul 04 17:54:41 heil r37170 packages/net/ haproxy/Makefile haproxy/patches/0001-BUG-MAJOR-http-don-t-emit-the-send-name-header-when-.patch haproxy/patches/0002-BUG-MEDIUM-http-option-checkcache-fails-with-the-no-.patch Jul 04 17:54:41 package: haproxy Jul 04 17:54:41 - integrate backported fixes from upstream Jul 04 18:04:56 build #323 of at91 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/323 Jul 04 18:12:14 jow r37171 trunk/package/network/config/firewall/ files/firewall.config Makefile * firewall: allow routed lan<->lan traffic by default Jul 04 18:15:31 build #301 of cobalt is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/301 Jul 04 18:51:05 build #313 of orion is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/313 Jul 04 19:02:05 build #302 of lantiq is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/302 Jul 04 19:02:06 build #300 of ppc40x is complete: Failure [failed svn compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/300 Jul 04 19:04:03 build #281 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/281 Jul 04 19:04:42 Hi all, back to getting my board to work... Jul 04 19:05:08 I'm having an Unhandled kernel unaligned access[#1] Jul 04 19:05:23 The entire bootlog is in the wiki (http://wiki.openwrt.org/toh/arcadyan/vgv7519#openwrt.bootlog) Jul 04 19:07:22 build #281 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/281 Jul 04 19:19:29 When during boot, the network cable isn't plugged, it doesn't crash on me... so that is OK Jul 04 19:20:00 After that, jsff2 is starting to complain on me, should I do something additional for that fs or do I need to remove it completely? Jul 04 19:30:36 build #302 of ramips is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/302 Jul 04 19:52:23 build #295 of uml is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/295 Jul 04 19:55:19 Hi [florian] Jul 04 19:55:31 <[florian]> The_Lizard: hey Jul 04 19:55:40 Does my flash need both flashfs and jsff2 partitions? Jul 04 19:57:53 I see a lot of 26.760000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x8c40 instead lines in my bootlog Jul 04 20:04:17 The_Lizard: did you flash a jffs2 image? Jul 04 20:04:24 no Jul 04 20:04:52 I haven't even built one, had before, but removed them all after KenjiMonster told me it wasn't necessary Jul 04 20:05:08 So should I be removing jsff2 partition support? Jul 04 20:06:11 the jffs2 partition is autocreated after the squashfs partition on first boot Jul 04 20:06:25 when using a squashfs image Jul 04 20:07:29 then it should choose the correct erase block size automatically Jul 04 20:08:02 What is wrong then? when it gives all these errors? Jul 04 20:08:16 should i erase my whole flash? Jul 04 20:08:44 in theory it should format the flash on first boot Jul 04 20:09:29 The first times it crashed out, in a network interrupt Jul 04 20:09:38 it can be found in the wiki, at the end of the bootlog Jul 04 20:09:54 http://wiki.openwrt.org/toh/arcadyan/vgv7519#openwrt.bootlog Jul 04 20:10:13 So possibly it went wrong there, I will re-flash my root.squashfs Jul 04 20:12:48 I was thinking about something else... Jul 04 20:14:02 the uImage.squashfs has a kernel, with the root.squashfs immediately concatenated.. Jul 04 20:14:24 shouldn't it be correctly padded? Jul 04 20:15:36 no idea how it's handled on lantiq Jul 04 20:15:58 usually it should be padded to match the kernel partition size of the flash layout Jul 04 20:16:19 my kernel starts at 0x80000, the rootfs at 0x1b0000 Jul 04 20:16:33 the kernel is a little less than 0x130000 Jul 04 20:18:45 looking at the dts files, it looks like the kernel autodetects kernel and rootfs size Jul 04 20:19:07 I guess, in the makefile, the Image/BuildLoader/squashfs should make it... Jul 04 20:19:24 so you should probably define no kernel or rootfs(_data) partitions Jul 04 20:19:30 dd if=$(KDIR)/loader-$(2).bin of=$(KDIR)/loader-$(2).bin.padded bs=1536k conv=sync Jul 04 20:19:55 Indeed, I only define a linux partition... Jul 04 20:20:41 so you should just flash the combined image to the linux partion (start) Jul 04 20:20:55 and the kernel should create the partitions accordingly Jul 04 20:21:40 The line below just cats the kernel with the root.squashfs file... Jul 04 20:22:02 the call below is prepare generic squashfs... so I guess it just adds the 0xdeadc0de ;) Jul 04 20:26:38 build #267 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/267 Jul 04 20:27:26 oh no, oops, it is in image/build/squashfs... Jul 04 20:27:33 it is just plain catted... Jul 04 20:30:24 I have added a line to padd it until 0x20000 Jul 04 20:30:41 that should be enough to make it up to the size of 0x1b0000 Jul 04 20:30:59 minus 0x80000 of course ;) Jul 04 20:32:01 it should be 0x130000 size... Jul 04 20:33:10 Is it 'allowed' to add another define to specify kernel padding for a board? Jul 04 20:36:12 I'm acting stupid... just setting it to 64k will do ;) Jul 04 20:37:37 This auto-detection, how large block-sizes will it take? Jul 04 20:41:43 * started flashing *, hope I can then get a successful startup ;) Jul 04 20:43:51 But that also means that the stuff about overlayfs in the wiki's flash layout is correct? Jul 04 20:48:32 KanjiMonster: http://pastebin.com/cmDc8Ufv - this is the bootlog in the jffs2 part Jul 04 21:22:53 jow r37172 packages/net/madwifi/files/lib/wifi/madwifi.sh Jul 04 21:22:53 madwifi: fix setup of unencrypted ad-hoc interfaces, regression was introduced with r31082 Jul 04 21:27:40 luka r37173 trunk/toolchain/musl/ (8 files in 2 dirs) * toolchain/musl: add version 0.9.11 Jul 04 21:27:46 jow r37174 branches/attitude_adjustment/package/madwifi/files/lib/wifi/madwifi.sh * AA: madwifi: merge r37172 Jul 04 22:27:05 wigyori r37175 trunk/target/ (7 files in 4 dirs) * imx23: bump kernel to 3.10 Jul 04 23:33:18 luka r37176 trunk/target/linux/ar71xx/patches-3.8/ (13 files) * ar71xx: merge patches [611-*,621-*] into 610-* Jul 05 01:25:03 build #269 of xburst is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/269 **** BEGIN LOGGING AT Fri Jul 05 01:50:51 2013 Jul 05 02:05:26 build #268 of ixp4xx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/268 Jul 05 02:06:19 nbd r37177 trunk/feeds.conf.default * feeds.conf.default: switch packages feed to git (#13818) Jul 05 02:54:31 build #240 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/240 **** ENDING LOGGING AT Fri Jul 05 02:59:58 2013