**** BEGIN LOGGING AT Sun Jul 14 03:00:00 2013 Jul 14 03:20:52 build #288 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/288 Jul 14 03:23:26 build #288 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/288 Jul 14 06:48:11 build #309 of lantiq is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/309 Jul 14 07:43:44 build #320 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/320 Jul 14 09:24:09 build #309 of ramips is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/309 Jul 14 11:02:44 nbd r37277 trunk/package/ utils/busybox/config/sysklogd/Config.in utils/busybox/config/init/Config.in * busybox: disable features marked as broken (#13782) Jul 14 11:28:20 hauke r37278 trunk/package/ kernel/broadcom-diag/src/diag.c kernel/broadcom-diag/src/diag.h * broadcom-diag: reoder some parts. Jul 14 11:30:22 hauke r37279 trunk/package/kernel/broadcom-diag/src/diag.c * broadcom-diag: check the correct value for not null. Jul 14 11:32:15 hauke r37280 trunk/package/kernel/broadcom-diag/src/diag.c * broadcom-diag: make it work with kernel 3.10 Jul 14 12:47:48 build #302 of uml is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/302 Jul 14 12:58:26 hauke r37281 trunk/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm * brcm47xx: do not change nvram without user interaction Jul 14 12:58:43 nbd r37282 trunk/ package/base-files/files/lib/upgrade/common.sh target/linux/generic/patches-3.10/400-rootfs_split.patch target/linux/x86/base-files/lib/upgrade/platform.sh package/system/mtd/src/mtd.c Jul 14 12:58:43 kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere Jul 14 12:58:47 nbd r37283 trunk/target/ linux/generic/patches-3.10/400-rootfs_split.patch linux/generic/config-3.10 Jul 14 12:58:48 kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default) Jul 14 13:00:45 hauke r37284 trunk/ (6 files in 3 dirs) * brcm47xx: do not load the kernel modules needed for Ethernet manually Jul 14 13:12:06 nbd r37285 trunk/target/linux/generic/patches-3.10/515-yaffs-3.10-disable-proc-entry.patch * kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848) Jul 14 13:12:57 is 3.10 the default yet in ar71xx ? Jul 14 13:13:09 <_trine> no Jul 14 13:14:05 <_trine> but 3.10 seems to compile and work ok Jul 14 13:15:53 thanks Jul 14 13:21:42 hauke r37286 trunk/target/ linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm * brcm47xx: fix switch handling Jul 14 13:33:23 _trine so i just modify target/linux/ar71xx/Makefile for 3.10 ? Jul 14 13:33:46 i'm about to commit a change that sets 3.10 as default for ar71xx Jul 14 13:34:18 <_trine> dape you could have done that but its better to wait now Jul 14 13:34:27 awesome! Jul 14 13:34:40 i'll pop a redbull in the wait ;-) Jul 14 13:39:09 <_trine> kirkwood is still using kernel 3.3.8 Jul 14 13:46:29 hauke r37287 trunk/ (36 files in 4 dirs) * brcm47xx: add initial support for kernel 3.10 Jul 14 14:06:49 nbd r37288 trunk/target/linux/ar71xx/Makefile * ar71xx: set linux 3.10 as default Jul 14 14:06:53 nbd r37289 trunk/target/ linux/ar71xx/config-3.10 linux/ar71xx/modules.mk linux/ar71xx/Makefile * ar71xx: move the watchdog driver to the kernel Jul 14 14:06:57 nbd r37290 trunk/target/ linux/ar71xx/config-3.8 linux/ar71xx/patches-3.8 * ar71xx: remove linux 3.8 Jul 14 14:07:00 nbd r37291 trunk/target/ linux/ar71xx/config-3.10 linux/ar71xx/image/Makefile * ar71xx: enable uimage split and use it for carambola2 Jul 14 14:07:04 nbd r37292 trunk/target/ linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c linux/ar71xx/image/Makefile * ar71xx: use uimage split for WZR-HP-G450H Jul 14 14:07:08 nbd r37293 trunk/target/ linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c linux/ar71xx/image/Makefile * ar71xx: use uimage split for WZR-HP-G300NH Jul 14 14:07:12 nbd r37294 trunk/target/ linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c linux/ar71xx/image/Makefile * ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp Jul 14 14:07:16 nbd r37295 trunk/target/ linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c linux/ar71xx/image/Makefile * ar71xx: use uimage split for WZR-HP-G300NH2 Jul 14 14:07:19 nbd r37296 trunk/target/linux/ar71xx/image/Makefile * ar71xx: increase kernel size for wndr3700 based devices Jul 14 14:07:23 nbd r37297 trunk/target/linux/ar71xx/image/Makefile * ar71xx: use uimage split for Ubiquiti XM devices Jul 14 14:07:27 nbd r37298 trunk/target/linux/ar71xx/image/Makefile * ar71xx: use uimage split for Embedded Wireless Dorin Jul 14 14:07:30 nbd r37299 trunk/target/linux/ar71xx/image/Makefile * ar71xx: use uimage split for DIR-825B1 Jul 14 14:07:34 nbd r37300 trunk/target/linux/ar71xx/image/Makefile * ar71xx: use uimage split for Cameo devices Jul 14 14:07:38 nbd r37301 trunk/target/linux/ar71xx/image/Makefile * ar71xx: use uimage split for Allnet devices Jul 14 14:07:42 nbd r37302 trunk/target/linux/ar71xx/image/Makefile * ar71xx: use uimage split for dlrtdev Jul 14 14:07:45 nbd r37303 trunk/target/linux/ar71xx/image/Makefile * ar71xx: use uimage split for WHR-HP-G300N Jul 14 14:09:14 awesome. Jul 14 14:11:59 <_trine> nbd will uimage spli be used on my nano? Jul 14 14:12:06 yes Jul 14 14:12:15 <_trine> how do you enable it Jul 14 14:12:31 you don't Jul 14 14:12:46 <_trine> is it by default Jul 14 14:12:51 the change simply makes sure there's no hardcoded size of the kernelpartition anymore Jul 14 14:13:02 hauke r37304 trunk/ (7 files in 5 dirs) * brcm47xx: use b53 phy driver for the switch in kernel 3.10 Jul 14 14:13:13 it automatically detects the kernel size and adjusts the partitions accordingly Jul 14 14:13:14 <_trine> so does that give you more space Jul 14 14:13:33 usually not, because 3.10 is already very close to the limit of the partition Jul 14 14:13:45 but it prevents it from breaking when the kernel exceeeds the previous size limit Jul 14 14:13:57 unfortunately linux linux kernels just keep growing in size Jul 14 14:14:09 and there's not much left that i can do to reduce it Jul 14 14:14:21 so i had to make sure that the hardcoded limits are removed Jul 14 14:14:59 <_trine> ok thanks Jul 14 14:15:16 hauke r37305 trunk/package/kernel/mac80211/Makefile * mac80211: b43: activate LP-Phy support every time Jul 14 14:16:35 hauke r37306 branches/attitude_adjustment/package/mac80211/Makefile * AA: mac80211: b43: activate LP-Phy support every time Jul 14 14:24:48 hauke r37307 trunk/package/ kernel/mac80211/Makefile kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch * mac80211: b43: load b43 on core rev 17 and 18. Jul 14 14:25:51 hauke r37308 branches/attitude_adjustment/ package/mac80211/Makefile package/mac80211/patches/847-b43-always-take-overlapping-devs.patch * AA: mac80211: b43: load b43 on core rev 17 and 18. Jul 14 14:41:55 <_trine> nbd the new code may have rendered my nano uncontactable Jul 14 14:42:54 _trine: clean your kernel tree Jul 14 14:43:34 <_trine> looks like I will need to get my ladders out again :( Jul 14 14:44:30 <_trine> I was already using 3.10 so I thought a new compile would have been ok Jul 14 14:45:24 better get an extra device that you can use to test new builds, if you need to climb ladders if something goes wrong Jul 14 14:47:36 <_trine> I have got more than one but got too blase Jul 14 14:50:51 hauke r37309 branches/attitude_adjustment/target/linux/brcm47xx/ base-files/lib/preinit/05_set_failsafe_switch_brcm base-files/lib/preinit/15_set_preinit_interface_brcm * AA: brcm47xx: prevent the switch from leaking packages between lan and wan. Jul 14 14:51:24 <_trine> If I die while climbing the ladder please send white lilies :) Jul 14 14:52:34 <_trine> nbd will make dirclean do the job Jul 14 14:59:29 make clean is enoguh Jul 14 15:15:47 build #293 of x86 is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/293 Jul 14 16:02:06 updated openwrt/upstream, https://home.comcast.net/~sdwalker/uscan/index.html Jul 14 17:31:41 nbd r37310 trunk/target/linux/ar71xx/Makefile * ar71xx: update to 3.10.1 Jul 14 18:02:19 blogic r37311 trunk/target/linux/ramips/ (5 files in 5 dirs) * ralink: drop v3.8 support Jul 14 18:02:28 blogic r37312 trunk/package/system/ubox/Makefile * ubox: update to latest git revison Jul 14 18:02:36 blogic r37313 trunk/package/system/procd/Makefile * procd: update to latest git revision Jul 14 18:02:45 blogic r37314 trunk/target/linux/ramips/ (5 files in 5 dirs) * ramips: disable ill_acc driver by default Jul 14 18:02:54 blogic r37315 trunk/target/ linux/ar71xx/patches-3.8/611-MIPS-ath79-wdt-timeout.patch linux/ar71xx/patches-3.8 linux/ar71xx/patches-3.10/611-MIPS-ath79-wdt-timeout.patch * ar71xx: fix maximum watchdog timeout Jul 14 18:03:51 build #269 of au1000 is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/269 Jul 14 18:18:27 blogic r37316 trunk/package/network/config/swconfig/Makefile * swconfig: fix dependency bug introduced by [37304] Jul 14 18:29:47 blogic r37317 trunk/target/linux/lantiq/patches-3.9/0018-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch * lantiq: apply [37258] also to the 3.9 kernel patches Jul 14 18:39:20 build #318 of atheros is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/318 Jul 14 18:51:48 luka r37318 trunk/package/network/config/netifd/Makefile * netifd: update to latest version, add bridge_empty option Jul 14 19:38:58 build #290 of ar7 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/290 Jul 14 19:40:54 build #273 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/273 Jul 14 20:15:39 mhei r37319 packages/lang/php5/Makefile * [packages] php5: upgrade to 5.4.17 Jul 14 20:53:29 hmmm, getting a kernel panic on my RSPro, with trunk r37316 Jul 14 20:53:33 http://pastebin.com/nfUtJ6eZ Jul 14 20:58:42 looks like it's qos related, managed to type "/etc/init.d/qos disable" before the panic and now it doesn't panic Jul 14 21:05:37 florian r37320 trunk/target/linux/generic/config-3.10 * kernel: add some more ARM related configuration symbols Jul 14 21:06:00 florian r37321 trunk/target/linux/realview/config-3.10 * realview: add support for 3.10 kernel Jul 14 21:06:20 florian r37322 trunk/target/linux/realview/Makefile * realview: switch to 3.10 kernel Jul 14 21:28:20 mirko r37323 trunk/scripts/download.pl * [scripts/downloads.pl] remove broken mirrors for linux kernel Jul 14 22:48:50 build #275 of xburst is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/275 Jul 14 22:59:32 luka r37324 trunk/target/linux/ar71xx/patches-3.8/611-MIPS-ath79-wdt-timeout.patch * ar71xx: remove patches for 3.8 (leftover after r37315) Jul 14 23:00:02 luka: thx Jul 14 23:00:30 blogic: np, but i just saw that my git is not configured properly Jul 14 23:00:36 the directory is still there :( Jul 14 23:02:42 hrr hrr Jul 14 23:04:19 evening guys :) Jul 14 23:10:07 luka r37325 trunk/target/linux/ar71xx/patches-3.8 * ar71xx: really delete patches-3.8 directory Jul 14 23:33:30 build #274 of ixp4xx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/274 Jul 15 00:00:25 build #325 of brcm47xx is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/325 Jul 15 00:05:25 luka r37326 trunk/target/ linux/imx6/base-files/etc/inittab linux/imx6/patches-3.10 linux/imx6/patches-3.10/100-bootargs.patch * imx6: switch to askconsole Jul 15 00:20:43 build #246 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/246 Jul 15 00:43:25 build #267 of ar71xx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/267 Jul 15 00:44:28 mirko r37327 packages/utils/coreutils/patches/010-fix-gets-removal.patch * [package/coreutils] fix errors in shipped stdio.in.h Jul 15 02:46:33 build #319 of atheros is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/319 **** ENDING LOGGING AT Mon Jul 15 02:59:58 2013