**** BEGIN LOGGING AT Thu Sep 19 02:59:59 2013 Sep 19 03:54:39 build #256 of octeon is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/256 Sep 19 05:57:26 blogic r38052 trunk/target/linux/ramips/patches-3.10/0202-owrt-USB-adds-dwc_otg.patch * ralink: add back dwc_otg driver Sep 19 05:57:41 blogic r38053 trunk/target/linux/ (8 files in 8 dirs) * ralink: add support for dalink dcs930l ipcam Sep 19 05:57:54 blogic r38054 trunk/target/linux/ramips/patches-3.10/0205-uvc-add-iPassion-iP2970-support.patch * ralink: make dcs930 uvc camera work Sep 19 06:34:47 nbd r38055 trunk/package/kernel/linux/modules/netsupport.mk * kernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185) Sep 19 09:04:21 nbd: I use the patches dir from trunk with the aa branch again, right ? Sep 19 09:29:22 stintel: right Sep 19 09:33:08 nbd: ok, flashing the buffalo Sep 19 09:33:12 brb Sep 19 09:41:39 nbd: looks even worse now :( even DHCP was slow Sep 19 09:41:42 http://pastebin.com/4mqS5xd1 Sep 19 09:41:53 after only a little bit of uptime Sep 19 09:42:03 hm, please try if it's repeatable Sep 19 09:42:20 other users had reported improvements Sep 19 10:00:33 luka r38056 packages/utils/mc/Makefile * [packages] mc: update to 4.8.10 Sep 19 10:06:17 build #376 of lantiq is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/376 Sep 19 10:08:47 luka r38057 packages/net/peervpn/Makefile * [packages] peervpn: update to 0-036 Sep 19 10:51:38 nbd: ping times are insane: http://pastebin.com/Tj5E9T5s Sep 19 10:58:45 I think I noticed something similar after updating my rspro at home last night, but it was late and didn't really test afterwards Sep 19 10:58:56 also lag in my ssh session Sep 19 12:09:30 build #334 of xburst is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/334 Sep 19 12:11:46 build #354 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/354 Sep 19 12:14:02 build #354 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/354 Sep 19 12:54:20 jow r38058 packages/net/coova-chilli/ patches/100-fix-sysinfo-redeclaration.patch patches Makefile * coova-chilli: fix "struct sysinfo" redeclaration with recent uClibc. Sep 19 13:29:03 build #367 of uml is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/367 Sep 19 14:52:34 nbd: ping times are better now, same image, same device .. last DMA error was few hours ago, ssh connection also seems better Sep 19 14:52:55 maybe it's some device of $colleague that confuses the AP or ath9k driver or wireless chip or so Sep 19 14:57:13 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c: In function 'proc_file_create': Sep 19 14:57:13 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c:822:5: error: implicit declaration of function 'create_proc_read_entry' [-Werror=implicit-function-declaration] Sep 19 14:57:13 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c:828:5: error: implicit declaration of function 'create_proc_entry' [-Werror=implicit-function-declaration] Sep 19 14:57:13 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c:828:9: warning: assignment makes pointer from integer without a cast [enabled by default] Sep 19 14:57:16 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c:832:12: error: dereferencing pointer to incomplete type Sep 19 14:57:21 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c:833:12: error: dereferencing pointer to incomplete type Sep 19 14:57:24 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c:853:9: warning: assignment makes pointer from integer without a cast [enabled by default] Sep 19 14:57:27 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c:857:12: error: dereferencing pointer to incomplete type Sep 19 14:57:30 build_dir/target-mips_r2_dsp_uClibc-0.9.33.2/linux-lantiq_xway/ltq-ptm-ar9/ifxmips_ptm_adsl.c:858:12: error: dereferencing pointer to incomplete type Sep 19 14:57:52 blogic: oops Sep 19 14:59:52 well the api was flushed down the toilet with the most recent kernel Sep 19 15:00:16 someone needs to rewrite all create_proc_*() calls to proc_create() Sep 19 15:04:06 will do in a sec Sep 19 15:30:41 stintel, which device is that ? Sep 19 15:31:28 I still see dma errors occaisionally on the wrt160nl, and I haven't had the time to dig into it Sep 19 15:31:28 been to busy doing things like moving Sep 19 15:41:07 groz: that's a Buffalo WZR-HP-G300NH Sep 19 15:41:42 ok Sep 19 15:51:44 kmod-madwifi_3.12-rc1+r3314-6_adm5120_mipsel.ipk Sep 19 16:57:43 juhosg r38059 trunk/target/linux/ ar71xx/patches-3.10/624-MIPS-ath79-WNR2200-support.patch ar71xx/config-3.10 ar71xx/files/arch/mips/ath79/mach-wnr2200.c * ar71xx: add kernel support for Netgear WNR2200 wireless router Sep 19 16:57:44 juhosg r38060 trunk/target/linux/ ar71xx/base-files/etc/diag.sh ar71xx/base-files/lib/ar71xx.sh ar71xx/base-files/etc/uci-defaults/02_network * ar71xx: add user-space support for the WNR2200 board Sep 19 16:57:46 juhosg r38061 trunk/target/linux/ ar71xx/generic/profiles/netgear.mk ar71xx/image/Makefile * ar71xx: add profile and build image for the WNR2200 board Sep 19 17:53:35 juhosg r38062 trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c * ar71xx: wnr2200: fix a typo in a LED name Sep 19 17:53:36 juhosg r38063 trunk/target/linux/ ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c ar71xx/config-3.10 ar71xx/patches-3.10/625-MIPS-ath79-add-tl-mr13u-support.patch * ar71xx: add kernel support for TP-Link TL-MR13U Sep 19 17:53:37 juhosg r38064 trunk/target/linux/ ar71xx/base-files/etc/diag.sh ar71xx/base-files/lib/ar71xx.sh ar71xx/base-files/lib/upgrade/platform.sh ar71xx/base-files/etc/uci-defaults/02_network * ar71xx: add user-space support for the TL-MR13U board Sep 19 17:53:38 juhosg r38065 trunk/tools/firmware-utils/src/mktplinkfw.c * firmware-utils/mktplinkfw: add support for the TL-MR13U board Sep 19 17:53:40 juhosg r38066 trunk/target/linux/ ar71xx/generic/profiles/tp-link.mk ar71xx/image/Makefile * ar71xx: add profile and build image for the TL-MR13U board Sep 19 18:44:33 juhosg r38067 trunk/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c * ar71xx: ar934x_nfc: use devm_* functions Sep 19 18:44:34 juhosg r38068 trunk/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c * ar71xx: ar934x_nfc: return error code from some low-level functions Sep 19 18:44:35 juhosg r38069 trunk/target/linux/ ar71xx/config-3.10 ar71xx/patches-3.10/413-mtd-ar934x-nand-driver.patch ar71xx/files/include/linux/platform/ar934x_nfc.h ar71xx/files/drivers/mtd/nand/ar934x_nfc.c * ar71xx: ar934x_nfc: add experimental support for hardware ECC Sep 19 18:44:36 juhosg r38070 trunk/target/linux/ar71xx/files/arch/mips/ath79/ dev-nfc.h dev-nfc.c * ar71xx: add ath79_nfc_set_ecc_mode helper Sep 19 18:44:38 juhosg r38071 trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c * ar71xx: wndr4300: enable HW ECC mode for the NAND controller Sep 19 18:46:02 build #291 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/291 Sep 19 19:38:29 bloated kernel is bloated :( Sep 19 19:51:18 alternatively, limited flash is limited Sep 19 19:51:55 * groz ticks off 'all of the above' Sep 19 19:52:09 small flash is limited, and kernel is getting bloated Sep 19 19:53:06 hmmm i wonder if it would load more than 1MB if i moved the rootfs a bit Sep 19 19:56:27 going to have to try, can only get the stupid thing down to 1136550 bytes Sep 19 19:56:42 without disabling printk/BUG anyway Sep 19 20:01:00 what are you debugging . other than load issues ? Sep 19 20:01:17 wondering what you can hack out, then replace with modules in the rootfs Sep 19 20:22:16 groz: wlan. Sep 19 20:22:28 groz: only ethernet is not a module Sep 19 20:23:12 though i dunno what openwrt puts in initramfs Sep 19 20:26:00 it boot Sep 19 20:26:01 s Sep 19 20:26:09 it didn't bother to put the wlan module anywhere though :X Sep 19 20:26:19 silly build system is silly Sep 19 20:26:28 i'll just build it in now that i have 2MB to work with :X Sep 19 20:26:58 (and yes i realize openwrt typically uses compat-wireless) Sep 19 20:35:52 hrm wifi still doesn't send beacons Sep 19 20:37:05 heh no firmware Sep 19 20:46:11 hmm Sep 19 20:46:14 ethernet isn't working either Sep 19 20:46:50 packets are being generated Sep 19 20:50:49 build #292 of ep93xx is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/292 Sep 19 20:54:48 i see, switch isn't responding Sep 19 20:55:11 [ 2.340000] rtl8366_smi: gpio_request failed for 5, err=-22 Sep 19 20:55:12 >_< Sep 19 20:57:27 eh that's EINVAL what the heck Sep 19 21:02:59 ah pinmux stuff changed Sep 19 21:24:22 does EXTROOT work with wdr4300? Sep 19 21:25:10 seems wifi doesn't work still, ah well Sep 19 21:48:44 how can i debug EXTROOT mounting? Sep 19 22:37:34 juhosg r38072 trunk/target/linux/ ar71xx/config-3.10 ar71xx/files/arch/mips/ath79/mach-mynet-n600.c ar71xx/patches-3.10/626-MIPS-ath79-add-MyNet-600-support.patch * ar71xx: add kernel support for the WD My Net N600 board Sep 19 22:37:35 juhosg r38073 trunk/package/system/mtd/src/Makefile * package/mtd: enable seama fixup code for ar71xx Sep 19 22:37:36 juhosg r38074 trunk/target/linux/ (5 files in 3 dirs) * ar71xx: add user-space support for the WD My Net N600 board Sep 19 22:37:37 juhosg r38075 trunk/target/linux/ar71xx/base-files/lib/upgrade/platform.sh * ar71xx: add sysupgrade support for the WD My Net N600 board Sep 19 22:37:38 juhosg r38076 trunk/target/linux/ ar71xx/generic/profiles/wd.mk ar71xx/image/Makefile * ar71xx: add profile and build image for the WD My Net N600 board Sep 20 02:00:22 luka r38077 trunk/target/linux/imx6/base-files/etc/inittab * imx6: drop inittab Sep 20 02:00:23 luka r38078 trunk/target/linux/imx6/config-3.10 * imx6: update config Sep 20 02:00:25 luka r38079 trunk/target/linux/imx6/base-files/etc/uci-defaults/02_network * imx6: update network defaults for Gateworks Ventana Sep 20 02:00:27 luka r38080 trunk/target/linux/ (14 files in 7 dirs) * imx6: update PCIe driver Sep 20 02:00:28 luka r38081 trunk/target/linux/ imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts imx6/patches-3.10/110-gw5400-a.patch imx6/files-3.10/arch/arm/boot/dts/imx6q-ventana.dtsi * imx6: update gw5400-a dts Sep 20 02:01:02 luka r38082 packages/utils/ i2c-tools/Makefile i2c-tools/patches/100-linux_include.patch * [packages] i2c-tools: update to svn r6199 **** ENDING LOGGING AT Fri Sep 20 03:00:00 2013