**** BEGIN LOGGING AT Sun Oct 20 02:59:58 2013 Oct 20 10:09:10 blogic: tested that the brn-boot doesn't load the boot params from offset 0x400 Oct 20 10:13:12 blogic: while your device is still functioning with the original firmware, would it be possible to create a backup of the configuration, other devices like this one, will have some useful information inside... Oct 20 10:43:59 The_Lizard: yeah Oct 20 10:44:02 its on my todo list Oct 20 10:44:18 but right now i am trying to make alsa talk to the pcm bus on newer mtk chipsets Oct 20 10:46:23 any news from Gabor? It's been awhile since I don't see commits or e-mails from him Oct 20 10:46:34 s/from/about Oct 20 10:47:01 well he is most likely busy with other stuff Oct 20 10:47:51 yes, much better than health problems Oct 20 12:07:27 ok Oct 20 15:48:00 updated openwrt/upstream, https://home.comcast.net/~sdwalker/uscan/index.html Oct 20 15:59:34 juhosg r38466 packages/devel/ (6 files in 3 dirs) * packages: add sysprof tool Oct 20 15:59:36 juhosg r38467 packages/net/mosquitto/Makefile * packages: mosquitto: update to 1.2 Oct 20 15:59:37 juhosg r38468 packages/net/tig/Makefile * packages: tig: update tig to 1.2.1. Oct 20 15:59:38 juhosg r38469 packages/net/lighttpd/ files/lighttpd.conf Makefile * packages: lighttpd: update to 1.4.32 Oct 20 15:59:39 juhosg r38470 packages/libs/avahi/Makefile * packages: avahi: clean up dependencies Oct 20 15:59:40 juhosg r38471 packages/admin/zabbix/Makefile * packages: zabbix: update to version 2.0.8 Oct 20 15:59:42 juhosg r38472 packages/net/ wifidog/Makefile wifidog/files/wifidog.conf * packages: wifidog: update to 20130917 version Oct 20 15:59:45 juhosg r38473 packages/libs/ libshout/patches/100-ogg-c.patch libshout/patches/110-shout-ogg-c.patch * packages: libshout: fix libshout compile Oct 20 15:59:48 juhosg r38474 packages/libs/ libshout/patches/120-vorbis-c.patch libshout/Makefile libshout/patches/140-no_example_doc_win32.patch * packages: libshout: update libshout to 2.3.1, refresh patches Oct 20 15:59:53 juhosg r38475 packages/utils/loop-aes/Makefile * packages: loop-aes: update to loop-aes 3.7a Oct 20 15:59:56 juhosg r38476 packages/net/uob-nomad/patches/ 006-linux_if_tr_fix.patch 005-linux_if_strip_fix.patch * packages: uob-nomad: fix compilation Oct 20 15:59:59 juhosg r38477 packages/net/remotefs/Makefile * packages: remotefs: update remotefs, change to repo to git Oct 20 16:00:02 juhosg r38478 packages/net/ser2net/Makefile * packages: ser2net: bump to 2.9.1 Oct 20 16:00:05 juhosg r38479 packages/mail/ alpine alpine/Makefile * packages: alpine: new package Oct 20 16:00:09 juhosg r38480 packages/libs/ shflags/patches/000-strip.patch shflags/Makefile * packages: shflags: Fix getting sources Oct 20 16:00:11 juhosg r38481 packages/multimedia/ (6 files in 4 dirs) * packages: xupnpd: add new package Oct 20 16:00:28 juhosg r38482 trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c * ar71xx: fix WLAN 5 GHz LED init on dir-825-c1 Oct 20 16:00:30 juhosg r38483 trunk/target/linux/ ar71xx/base-files/lib/upgrade/allnet.sh ar71xx/base-files/lib/upgrade/openmesh.sh * ar71xx: Fix sysupgrades for Allnet and OpenMesh devices Oct 20 16:00:32 juhosg r38484 trunk/tools/firmware-utils/src/mkfwimage.c * mkfwimage: Increase RSPRO maximum size to 0xF00000 (15 MiB) Oct 20 16:21:27 juhosg r38485 packages/utils/haveged/ Makefile files/haveged.init * packages: haveged: upgrade to 1.7c Oct 20 16:37:17 blogic: just found some PFS storage at the end of the bootloader, it are the recovery pages Oct 20 17:52:42 nbd r38486 trunk/package/kernel/mac80211/patches/550-ath9k_entropy_from_adc.patch Oct 20 17:52:42 ath9k: gather entropy from raw ADC I/Q samples (use the least significant bit only) Oct 20 18:03:25 build #384 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/384 Oct 20 18:05:22 build #384 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/384 Oct 20 19:08:52 gonna flash openwrt on this wndr3400, I know there are probably hundreds of testers, but count me in :) Oct 20 19:47:13 build #361 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/361 Oct 20 19:49:57 build #417 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/417 Oct 20 19:54:10 hauke: ping Oct 20 19:54:18 mazilo: pong Oct 20 19:55:13 hauke: I already responded to your post (https://forum.openwrt.org/viewtopic.php?pid=215230#p215230). Oct 20 20:20:54 mazilo: have you tried current openwrt trunk with the patch I linked in the forum post? Oct 20 20:22:53 hauke: Nope. But, If you read my earlier post (https://forum.openwrt.org/viewtopic.php?pid=215174#p215174) after your suggestion with SVN trunk r38458, it doesn't work. Oct 20 20:23:17 I meant r38460. Oct 20 20:26:24 I also suggested r38307 in the first post I did in that thread Oct 20 20:27:04 Hauke: r38307 works. Oct 20 20:27:39 mazilo: yes so I still think it is the serial console which causes trouble here Oct 20 20:28:26 Hauke: From your explanation in your post, I can concurt with that. But, I don't know how to fix this issue. Oct 20 20:28:47 mazilo: the patch could fix the issue Oct 20 20:29:21 Hauke: Is the patch included in r38460 or latest? Oct 20 20:29:26 no Oct 20 20:29:52 Hauke: Can you commit the patch so I can give it a try? Oct 20 20:30:23 no that will probably break some other devices Oct 20 20:30:41 if that patch works, I will work on a better version Oct 20 20:31:21 Hauke: OK and that will be cool. Oct 20 20:32:38 Hauke: BTW, I could be wrong, but I thought I saw the patch (http://hauke-m.de/files/openwrt/console.patch) already included in r38460. Oct 20 20:33:02 mazilo: no it was never committed Oct 20 20:33:16 Hauke: IC. Oct 20 20:36:42 Hauke: Here is target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch (http://pastebin.com/D7MEXaDe) from r38430 Oct 20 20:46:51 In that patch the SSB_CHIPCO_UART0_DATA should be replaced by a SSB_CHIPCO_UART1_DATA Oct 20 20:47:48 on most devices tty0 is used mainly for serial, on your device it could be tty1 Oct 20 20:48:17 Hauke: IC. Oct 20 22:10:53 build #371 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/371 Oct 20 22:13:30 build #313 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/313 Oct 20 22:16:17 build #63 of imx23 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/imx23/builds/63 Oct 21 02:42:39 build #397 of uml is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/397 **** ENDING LOGGING AT Mon Oct 21 02:59:58 2013