**** BEGIN LOGGING AT Fri Aug 01 03:00:00 2014
Aug 01 04:38:42 <DonkeyHotei> zajec: interesting thing happened
Aug 01 04:38:57 <DonkeyHotei> i compiled r38383
Aug 01 04:39:24 <DonkeyHotei> the kernel starts booting then spontaneously reboots
Aug 01 04:39:31 <DonkeyHotei> last line is:
Aug 01 04:39:56 <DonkeyHotei> [    0.076000] Switching to clocksource MIPS
Aug 01 04:42:16 <DonkeyHotei> zajec: ideas?
Aug 01 04:50:25 <zajec> interesting
Aug 01 04:54:58 <DonkeyHotei> granted, i didn't do a dirclean, just deleted build_dir, staging_dir, and tmp
Aug 01 04:57:22 <zajec> that's fine
Aug 01 05:01:46 <zajec> DonkeyHotei: what kernel version was in that rev?
Aug 01 05:02:14 <DonkeyHotei> [    0.000000] Linux version 3.10.13 (danielg4@chimera) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38383) ) #1 Thu Jul 31 4
Aug 01 05:03:03 <zajec> well, you could try bisecting
Aug 01 05:03:17 <zajec> to see which OpenWrt commit started failing even worse
Aug 01 05:03:23 <zajec> maybe that will give us some clue
Aug 01 05:03:33 <zajec> maybe we're doing sth wrong
Aug 01 05:03:41 <zajec> and at some point we started doing that wrong thing earlier
Aug 01 05:03:52 <DonkeyHotei> i was intending to, but this might already be a clue, and i wanted your input
Aug 01 05:03:54 <zajec> so bisecting could tell us what we do incorrectly
Aug 01 05:04:09 <DonkeyHotei> it would be great if Hauke were around
Aug 01 05:04:15 <zajec> no idea why it could reboot right after "[    0.076000] Switching to clocksource MIPS"
Aug 01 05:04:46 <DonkeyHotei> well, what's normally the next line?
Aug 01 05:05:21 <zajec> "NET: Registered protocol family 2"
Aug 01 05:06:19 <DonkeyHotei> hmm
Aug 01 05:06:28 <zajec> could you send me your nvram?
Aug 01 05:06:32 <zajec> you can get it from CFE
Aug 01 05:06:40 <DonkeyHotei> could everything be clock-related?
Aug 01 05:06:52 <zajec> don't know
Aug 01 05:11:09 <DonkeyHotei> zajec: check pm
Aug 01 05:11:56 <zajec> nothing unusual in it :| no idea
Aug 01 05:20:38 <DonkeyHotei> zajec: i strongly suspect kernel version updates will trigger the failures, but i need sleep
Aug 01 05:23:01 <zajec> trunk is still at 3.10
Aug 01 05:23:07 <zajec> so there won't be any real big kernel update
Aug 01 05:23:15 <zajec> this may be one of the patches we added at some point
Aug 01 05:23:18 <zajec> no idea why
Aug 01 05:23:28 <zajec> you can try bisecting using two paths
Aug 01 05:23:37 <zajec> target/linux/generic and target/linux/brcm47xx
Aug 01 07:02:04 <builder_> build #575 of au1000 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/575
Aug 01 07:02:53 <builder_> build #41 of brcm47xx.mips74k is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.mips74k/builds/41
Aug 01 07:05:37 <builder_> build #589 of ar71xx is complete: Failure [failed shell]  Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/589
Aug 01 07:12:34 <OpenWrt-Commits> nbd r41922 trunk/target/linux/cns3xxx/image/Makefile * cns3xxx: fix building initramfs and non-initramfs together
Aug 01 07:12:42 <OpenWrt-Commits> nbd r41923 branches/barrier_breaker/target/linux/cns3xxx/image/Makefile * cns3xxx: fix building initramfs and non-initramfs together
Aug 01 07:55:30 <builder_> build #539 of adm5120 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/539
Aug 01 08:15:53 <builder_> build #495 of octeon is complete: Failure [failed compile_8]  Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/495
Aug 01 08:39:32 <OpenWrt-Commits> cyrus r41924 packages/sound/mocp * mocp: moved to github
Aug 01 08:39:33 <OpenWrt-Commits> cyrus r41925 packages/libs/libsamplerate * libsamplerate: moved to github
Aug 01 08:39:34 <OpenWrt-Commits> cyrus r41926 packages/net/tinc * tinc: moved to github
Aug 01 08:39:37 <OpenWrt-Commits> cyrus r41927 packages/net/radsecproxy * radsecproxy: moved to github
Aug 01 09:26:16 <OpenWrt-Commits> nbd r41928 trunk/target/linux/cns3xxx/Makefile * cns3xxx: add myself as maintainer
Aug 01 09:40:16 <OpenWrt-Commits> blogic r41929 trunk/package/ (5 files in 3 dirs) * ugps: add a minimal gps daemon
Aug 01 10:35:22 <OpenWrt-Commits> blogic r41930 trunk/target/linux/ar71xx/nand/target.mk * ar71xx: add RTC feature flag to ar71xx/nand
Aug 01 10:38:43 <OpenWrt-Commits> blogic r41931 branches/barrier_breaker/target/linux/au1000/image/Makefile * au1000: fix copy pasta failure
Aug 01 10:40:57 <slachta> I am forgetting to add Makefiles to be indexed for commit on telephony repository. Happened to me twice today. :(
Aug 01 10:41:35 <jow_laptop> make a shell alias that refuses git push if unstaged stuff is found
Aug 01 10:41:43 <jow_laptop> would be my idea
Aug 01 10:44:23 <slachta> Great idea. I am overlooking the small things lately, so I have to do something to avoid that behavior.
Aug 01 11:22:01 <OpenWrt-Commits> blogic r41932 trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite.c * ar71xx: oolite: the buttons are not active_low
Aug 01 11:22:05 <OpenWrt-Commits> blogic r41933 trunk/target/linux/ ramips/base-files/etc/uci-defaults/01_leds ramips/base-files/etc/diag.sh * ramips: Fix LEDs on the Kingston MLW221
Aug 01 11:22:09 <OpenWrt-Commits> blogic r41934 trunk/package/devel/valgrind/Makefile * valgrind: add x86_64 support
Aug 01 11:22:12 <OpenWrt-Commits> blogic r41935 trunk/package/boot/grub2/Makefile * package:grub2: fix build error on linux missing libzfs
Aug 01 11:22:17 <OpenWrt-Commits> blogic r41936 trunk/target/linux/ ramips/dts/WIZARD8800.dts ramips/base-files/lib/ramips.sh ramips/image/Makefile ramips/base-files/etc/uci-defaults/02_network * ramips: add support for easyacc wizard8800
Aug 01 13:55:10 <OpenWrt-Commits> cyrus r41937 packages/net/horst * horst: moved to github
Aug 01 15:59:33 <acoul> http://pastebin.com/Qmu3GEMz
Aug 01 17:40:46 <builder_> build #643 of ppc44x is complete: Failure [failed shell_9]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/643
Aug 01 19:01:22 <builder_> build #138 of pxa is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/138
Aug 01 19:01:34 <builder_> build #683 of cobalt is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/683
Aug 01 19:19:35 <builder_> build #654 of uml is complete: Failure [failed shell compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/654
Aug 01 19:22:19 <builder_> build #612 of sibyte is complete: Failure [failed shell_9]  Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/612
Aug 01 19:33:28 <KanjiMonster> Hauke: I guess we need to update the ucode versions to include: b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found with a bcm43217
Aug 01 19:33:41 <KanjiMonster> (I'll take care of it)
Aug 01 19:35:01 <Hauke> yes it was first seen in broadcom-wl-5.100.104.2.tar.bz2
Aug 01 19:35:43 <KanjiMonster> bcm43217 support is very recent
Aug 01 19:36:46 <Hauke> is it supported by b43 now?
Aug 01 19:37:32 <Hauke> KanjiMonster: you can select a more recent firmware in menuconfig
Aug 01 19:37:43 <KanjiMonster> yes
Aug 01 19:38:12 <KanjiMonster> rafal added 43217, 43227 43228 and 43131 support I think
Aug 01 19:46:47 <Hauke> KanjiMonster: I plan to add these b43 patches to bb
Aug 01 20:01:39 <Tolstyak> Hey ya'll
Aug 01 20:17:25 <KanjiMonster> Hauke: seems to even work \o/ successfully connected to an AP on a bcm43217
Aug 01 20:18:49 <builder_> build #624 of avr32 is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/624
Aug 01 20:21:47 <Hauke> KanjiMonster: nice
Aug 01 20:22:14 <Hauke> this device connected to a bcm63xx?
Aug 01 20:22:39 <KanjiMonster> yes
Aug 01 20:23:04 <KanjiMonster> funny thing, it's a spromless one, but its pciid is 43227 and not 43217
Aug 01 20:53:40 <OpenWrt-Commits> blogic r41938 trunk/target/linux/ ramips/patches-3.10/0221-pinmux-rt5350-spi_cs1.patch ramips/dts/rt5350.dtsi * ramips: Add support for SPI_CS1 pinmux
Aug 01 20:53:51 <OpenWrt-Commits> blogic r41939 trunk/target/linux/ (8 files in 7 dirs) * ramips: Add support for VoCore
Aug 01 20:56:49 <KanjiMonster> zajec: your bcm43217 support works for me :)
Aug 01 20:59:31 <zajec> wow
Aug 01 20:59:35 <zajec> that's great! :)
Aug 01 21:01:05 <KanjiMonster> at least connecting to an AP on it worked and I could ping my mobile phone
Aug 01 21:01:15 <KanjiMonster> didn't test anything beyond it
Aug 01 21:01:49 <zajec> :)
Aug 01 21:01:52 <KanjiMonster> sprom-less bcm43217 are funky, their pci deviceid is 43227 (not 43217)
Aug 01 21:02:28 <zajec> i don't like this mess with IDs :/
Aug 01 21:04:49 <KanjiMonster> well, the important part is that it works
Aug 01 21:58:58 <OpenWrt-Commits> jogo r41940 trunk/target/linux/ (23 files in 3 dirs) * brcm63xx: add working lzma-loader and use it for initramfs
Aug 01 21:59:01 <OpenWrt-Commits> jogo r41941 trunk/target/linux/ brcm63xx/patches-3.10 brcm63xx/Makefile brcm63xx/config-3.10 * brcm63xx: switch to 3.14
Aug 01 21:59:05 <OpenWrt-Commits> jogo r41942 trunk/target/linux/ (73 files in 2 dirs) * brcm63xx: rework fallback sprom support
Aug 01 21:59:10 <OpenWrt-Commits> jogo r41943 trunk/package/kernel/mac80211/Makefile * mac80211: b43: include ucode30 by default
Aug 01 21:59:12 <OpenWrt-Commits> jogo r41944 trunk/target/linux/ (5 files in 3 dirs) * brcm63xx: add preliminary support for D-Link DSL-2751B E1
Aug 01 22:49:13 <zajec> KanjiMonster: my ARM router has the same ID ;)
Aug 01 22:49:47 <zajec> KanjiMonster: Netgear R6250 has 14e4:a8db which is BCM43217
Aug 01 22:50:01 <zajec> 0xa8db is 43227 ofc
Aug 01 22:51:30 <KanjiMonster> heh
Aug 01 22:52:13 <OpenWrt-Commits> jow r41945 trunk/ (8 files in 8 dirs) * netfilter: introduce xt_id match
Aug 01 22:55:50 <KanjiMonster> zajec: then I can leave it up to you to add that pciid to bcma ;p
Aug 01 22:56:16 <zajec> it is added
Aug 01 22:56:22 <zajec> i thnk
Aug 01 22:56:24 <zajec> or now?
Aug 01 22:56:25 <zajec> or not?
Aug 01 22:56:30 <zajec> maybe not ;)
Aug 01 22:56:36 <zajec> ok, i'll handle that
Aug 01 22:58:54 <KanjiMonster> zajec: fun was trying to find a device I can use to test my new fallback sprom code - my 6358/4321 has a proper sprom, my 6368/43222 has a proper sprom, my 6362/62268's internal wifi is unsupported, and my 6328 has ath9k wifi
Aug 01 22:59:19 <KanjiMonster> so I had to add support or my 6318/43217 to actually have a device to test
Aug 01 22:59:52 <zajec> nice :)
Aug 01 23:00:10 <zajec> what's wrong with 6362/62268 internal WiFi?
Aug 01 23:00:14 <zajec> some weird bus (ubus)?
Aug 01 23:00:19 <zajec> or unsupported PHY/radio?
Aug 01 23:00:29 <[florian]> yeah it's a separate bus interface
Aug 01 23:00:37 <[florian]> ubus indeed
Aug 01 23:00:41 <zajec> :/
Aug 01 23:00:52 <[florian]> not sure if the cores are discoverable
Aug 01 23:00:57 <KanjiMonster> zajec: the one you agreed to write glue driver ;)
Aug 01 23:00:58 <zajec> hardcoded afair
Aug 01 23:01:05 <[florian]> whether we will have ssb over ubus
Aug 01 23:01:11 <KanjiMonster> [florian]: they are, they have a proper erom like on bcma
Aug 01 23:01:19 <KanjiMonster> (same format)
Aug 01 23:01:27 <zajec> KanjiMonster: oh, i think you told me they are hardcoded ;)
Aug 01 23:01:48 <zajec> KanjiMonster: i agreed and started, but then you told me we don't really want to extend bcma ;)
Aug 01 23:02:17 <KanjiMonster> because it's only similar to bcma, but it is not exactly bcma ;)
Aug 01 23:03:16 <[florian]> it would probably be cleaner to have a separate shim bus layer
Aug 01 23:03:28 <KanjiMonster> zajec: the radio revs are still unsupported (2057 rev 8 and rev 12)
Aug 01 23:03:34 <zajec> ouch
Aug 01 23:03:54 <[florian]> zajec: I have started to buy off some of your requested HW btw ;)
Aug 01 23:04:10 <zajec> [florian]: err, i already ordered sth
Aug 01 23:04:26 <[florian]> ok, then we can cross check which one you dont have
Aug 01 23:04:27 <zajec> [florian]: today (few hours ago) i ordered this BCM94360 with adapter
Aug 01 23:05:00 <KanjiMonster> [florian]: maybe we should get zajec a 6362 or 63268 ;)
Aug 01 23:20:04 <dlorah-> hi [florian], can i test the patch for my dammned linksys? :)
Aug 01 23:29:43 <DonkeyHotei> zajec: are you there?
Aug 01 23:31:24 <zajec> yeah
Aug 01 23:31:32 <zajec> bit not really wantint to work too much ;)
Aug 01 23:31:36 <zajec> a bit tired
Aug 01 23:31:45 <zajec> 1:31 AM in Poland ;)
Aug 01 23:31:52 <zajec> i guess you live in USA?
Aug 01 23:31:56 <DonkeyHotei> zajec: r29755, normal boot. r30487, normal boot but hangs on reboot. r30488, kernel panic on boot
Aug 01 23:32:00 <DonkeyHotei> yes
Aug 01 23:32:31 <zajec> ok, let me see that revision 30488
Aug 01 23:32:35 <DonkeyHotei> [    0.452000] PCI: Fixing up device 0000:00:00.0
Aug 01 23:32:35 <DonkeyHotei> [    0.476000] Data bus error, epc == 80185150, ra == 801852b8
Aug 01 23:33:57 <zajec> 30488 is "brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed."
Aug 01 23:34:09 <DonkeyHotei> those lines appear instead of:
Aug 01 23:34:18 <DonkeyHotei> [    0.460000] pci 0000:01:00.0: BAR 0: assigned [mem 0x18010000-0x1801ffff 64bit]
Aug 01 23:34:18 <DonkeyHotei> [    0.468000] pci 0000:01:00.0: BAR 0: set to [mem 0x18010000-0x1801ffff 64bit] (PCI address [0x18010000-0x1801ffff])
Aug 01 23:38:45 <DonkeyHotei> zajec: does this help?
Aug 01 23:40:53 <zajec> DonkeyHotei: do you have boot logs of 30487 and 30488?
Aug 01 23:41:00 <zajec> can you send me them? or pastebin them
Aug 01 23:41:17 <zajec> not over IRC pm ;) i'll take over 10 minutes that way ;p
Aug 01 23:41:25 <DonkeyHotei> i used the failsafe escape for 30487
Aug 01 23:41:33 <DonkeyHotei> i'll pastebin both
Aug 01 23:44:29 <DonkeyHotei> zajec: http://pastebin.com/4QkV3uxp and http://pastebin.com/kvTZ2AKa
Aug 01 23:49:29 <zajec> no more ideas
Aug 01 23:49:34 <zajec> i'll think tomorrow
Aug 01 23:49:46 <zajec> what's a crappy story with this device ;|
Aug 01 23:49:53 <DonkeyHotei> i was hoping to deploy this tomorrow
Aug 01 23:50:24 <DonkeyHotei> i guess i will use the fon2.0n with stock fw as a stopgap
Aug 01 23:50:49 <DonkeyHotei> in the meantime, i will be off irc
Aug 01 23:51:15 <DonkeyHotei> i can still answer e-mails
Aug 01 23:51:27 <KanjiMonster> zajec: DonkeyHotei: one thing that is strange is that in the non-working version the line "PCI: Fixing up device 0000:00:00.0" appears twice
Aug 01 23:53:40 <builder_> build #689 of orion is complete: Failure [failed compile_8]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/689
Aug 02 00:24:05 <builder_> build #548 of iop32x is complete: Failure [failed shell_9]  Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/548
Aug 02 01:15:06 <builder_> build #643 of ar7 is complete: Failure [failed shell_14]  Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/643
Aug 02 01:27:40 <rsmarples> hi. the sources folder in downloads is misisng mm-common-0.9.6.tar.xz
Aug 02 02:10:42 <builder_> build #136 of adm8668 is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/adm8668/builds/136
Aug 02 02:23:49 <builder_> build #535 of mcs814x is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/535
Aug 02 02:30:02 <builder_> build #230 of mvebu is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/mvebu/builds/230
**** ENDING LOGGING AT Sat Aug 02 02:59:59 2014